Tender For Day To Day Maintenance Complaints (Petty Repair) To Bhattacharjee, Jacob, Shivalik Enclave And Mes Md Accn Under Age B/R-Ii Of Ge (N) Mamun.
Tender Value
40 Lakhs
Estimated cost
Bid Submission
08 Oct 2026
4 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pathankot → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Day To Day Maintenance Complaints (Petty Repair) To Bhattacharjee, Jacob, Shivalik Enclave And Mes Md Accn Under Age B/R-Ii Of Ge (N) Mamun.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 01-Oct-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 08-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down shutters of any description exc 1 Sqm but n exc 2 Sqm each complete all as specified and directed. |
| 2 | Taking down cement plaster on brick wall upto any height (max of triple storey) and ceiling including raking out joints hacking for key scrubbing down with water, complete all as specified and directed. |
| 3 | Demolition of cement Concrete(unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) or as in sunken complete. |
| 4 | Easing of window shutters/ CB/ Kitchen Cabinet (One unit shall comprise of one complete window/CB/Showcase irrespective of number of leaves) but not exceeding 1 sqm each to ensure smooth closing/opening including tightening of hinges, adjustement of tower bolts, sliding bolt and handles etc complete all as specified. |
| 5 | Easing of window shutters/CB/ Kitchen Cabinet (One unit shall comprise of one complete window/CB/Showcase irrespective of number of leaves) but exceeding 1 sqm each and not exceeding 2 Sqm to ensure smooth closing/opening including tightening of hinges, adjustement of tower bolts, sliding bolt and handles etc complete all as specified. |
| 6 | Repair to PVC/Panelled/skeleton door shutters by making minor adjustment to hinges etc easing shutter Pieces, small let in for making good where hinges, etc. have been removed from chowkhats or frames, joinery, etc.including painting or oiling to match, if required incl taking down of shutter if required and refixing in same position including welding to angle iron chowkhats |
| 7 | Welding in repairs not exceeding 6.00 cm in length & thickness of metal to be welded not exceeding 6 mm complete all as specified including material & labour. |
| 8 | S&F aluminium anodised barrel tower bolt 200 mm complete all as specified |
| 9 | S&F 250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified. |
| 10 | S&F 150mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified |
| 11 | S&F 100 mm MS butt hinges, medium weight cold rolled fixed with screws or welded on wooden or steel frame complete all as specified. |
| 12 | S&F 300 mm MS ordinary rat tail rod pattern springs incl roller and roller plate complete (Helical door spring) Make Ritz or equivalent as approved welded to steel chowkets . |
| 13 | Supply only aluminum floor door stopper of size 150 mm with two rubber legs complete all as specified and directed |
| 14 | S&F 300mm mild steel hydraulic door closer welded/ fixed to chowkhat, complete all as specified and directed |
| 15 | M&L in repair for 3 mm thick plain glass fixing and glazing with oil putty/nails wire including hacking out old broken glass in wooden/steel frame complete all as specified and directed |
| 16 | S & F in repair galvanised mild steel wire cloth nominal dia of wire 0.56mm and average width of aperture 1.00mm in wooden/steel frame complete all as specified and directed |
| 17 | S & F in repairs for stainless steel 25 mm dia curtain rod fixed in with side brackets (both side)or end brackets, complete all as specified. |
| 18 | S & F in repair peg set of six made of stainless steel complete all as direcred and specified |
| 19 | Glazed ceramic coloured tiles 600mm x 300mm x 7mm thick as in vertical surfaces such as skirting, dado etc set and jointed joint free in neat cement slurry, pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 to receive tiles including cement mortar bedding and dismantling floor, hearth or tiling and removing rubbish offf premises of MoD land, complete all as specified and directed. |
| 20 | Non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement over 15mm thick screed bed or bedding layer of mortar in CM 1:4 including cement mortar bedding and dismantling floor, hearth or tiling and removing rubbish offf premises of MoD land, complete all as specified and directed. |
| 21 | Non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement over 15mm thick screed bed or bedding layer of mortar in CM 1:4 including cement mortar bedding and dismantling floor, hearth or tiling and removing rubbish offf premises of MoD land, complete all as specified and directed. |
| 22 | M&L for 20 mm thick plaster (1:3) for repairing of projections, chajjas , roofs, facia etc. in patches not exceeding 3 Sqm in each patch and by necessary preparation i.e. scrapping, cutting, chiseling, derusting and cleaning exposed reinforcement, sufaces of damaged, loose RCC surfaces and applying one coat of cement slurry and filling the surfaces with cement concrete (1:1.5:3) using 12.5mm graded crushed stone aggregate and reinforced with welded mesh of weight exc 2kg per sqmtr but n.exc 3kg/sqm with or without facia and finished with cement sand mortar (1:3) using coarse sand in patches are n.exc 70mm including applying two coats of finishes to match with the existing surfaces in at any height complete all as specified. Note:- Cost of formwork and welded mesh shall be deemed to be included in unit rate quoted by the contractor. |
| 23 | S&F in repair medium grade steel water tubing, 15 mm bore galvanised with all fittings such as Union , Tank nipple with tank fittings and socket, elbow, nipple etc. and fixed complete to walls or laid in floors all as specified and directed |
| 24 | S&F in repair medium grade steel water tubing, 20 mm bore galvanised with all fittings such as Union , Tank nipple with tank fittings and socket, elbow, nipple etc. and fixed complete to walls or laid in floors all as specified and directed |
| 25 | S&F in repair only GI fittings without GI pipe such as; union, socket, Tee, elbow, nipple, plug, tank nipple, reducer of size 6\\" & 4\\" long, all fittings for 15 mm bore pipe complete all as specified and directed. |
| 26 | S&F in repair only GI fittings without GI pipe such as; union, socket, Tee, elbow, nipple, plug, tank nipple, reducer of size 6\\" & 4\\" long, all fittings for 20 mm bore pipe complete all as specified and directed. |
| 27 | Removal of air lock, blocking in water pipes/bib taps/stop valve incl cleaning pipes as requried and as directed to ensure proper flow of water complete all as specified. |
| 28 | S & F in repair 20mm bore ball cock high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (min wt 210 gm) complete all as specified |
| 29 | S&F in repair 20 mm size gun metal globe or gate valves with iron wheel head, screwed both end for iron pipe and fixed cast copper chromium plated fancy type alloy ISI marked with crutch or butter fly handles screwed down screwed for iron pipe of 20mm bore complete all as specified and directed. |
| 30 | Cleaning of over head PVC water tank of capacity 250ltr to 500ltr descaling, washing complete with soap solution and removing vegetation around the over head tank/plate form including opening and reconnecting with GI tubing as site requirement complete all as directed by Engineer-in-Charge |
| 31 | Cleaning of over head PVC water tank of capacity 1000ltr descaling, washing complete with soap solution and removing vegetation around the over head tank/plate form including opening and reconnecting with GI tubing as site requirement complete all as directed by Engineer-in-Charge |
| 32 | S&F in repair PVC white low level flushing cistem 10ltrs capacity with all fittings syphonic action push stype with inlet ball valve and float incl PVC flush pipe, ball valve, handle, MS bracket etc complete all as specified. |
| 33 | S&F in repairs PVC flush pipe of 32 mm dia with two Each check nuts for connecting low level flushing cistern to Indian type WC complete all as specified. |
| 34 | S&F in repairs PVC syphon assembly complete for low level flushing cistern complete all as specified and directed. |
| 35 | S & F in repair vitreous china squatting pan water closet, orissa pattern, size 580x440mm white with integral foot rests including provision of lean concrete bedding connection to drain out pipe and to flush pipe anti syphonage pipe etc complete including making good to floor where required, complete all as specified and directed. |
| 36 | S & F in repairs vitreous china wash down water closet pan \\"Pedestal\\" coloured including fixing bolts etc including PVC seat cover white with flat bottom including MS, CP or aluminium anodised hinge devices & making connections to trap and good to floor in cement mortar M-15 (1:2:4) type B-1 (using 20mm graded crushed stone aggregated, complete all as specified and directed. |
| 37 | S & F in repairs vitreous china one piece wash down water closet pan \\"Pedestal\\" white including fixing bolts etc, making connection to trap, flush pipe and PVC seat cover white including stainless steel or aluminium anodised hinge devices including 10 litre capacity PVC valveless, low level, synphonic action type, flushing cistern, with inlet, ball valve, float valve, handle including brackets & making good to floor in cement mortar M-15 (1:2:4) type B-1 (using 20mm graded crushed stone aggregated, complete all as specified and directed. |
| 38 | S&F in repair plastic water closet seat cover, closed pattern with flat bottom and cover (as per sample) and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 39 | S&F Health foucet mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube an ABS wall hook and making connection including making connections and fixed in position complete all as specified & directed. |
| 40 | S&F Jet Spray with 1.50 mtr tube (as per sample) and fixed complete all as specified and directed. |
| 41 | S&F in repair toilet paper holder with flash recessed type of stainless steel complete all as specified and directed. |
| 42 | S&F in repair vitreous china ware wash hand basin white flat back size 550mm x 400mm excl taps, waste chain and plug and porecelain stopper but incl bracket and cutting for and pinning in ends of brackets or erecting stand. |
| 43 | S&F in repair waste Coupling Suitable for Existing WHB/Sink all as specified |
| 44 | S & F in repairs waste pipe suitable for Existing WHB/Sink/Urinal etc. all as specified |
| 45 | Repair to stop leaking of PTMT Bib tap/ Pillar tap/Stop cock by suitable jumper washer and etc, complete all as specified |
| 46 | Repair to stop leaking of CP Brass Bib tap/ Pillar tap/Stop cock/wall mixer/WHB Mixer by suitable spindle and etc, complete all as specified |
| 47 | S&F in repairs for 15 mm bore bib taps of PTMT any colour high pressure screwed for iron pipe and fixed(Minimum weight 15mm-90 gms) |
| 48 | S&F in repair Bib taps cast copper alloy chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule 15mm bore, complete all as specified and directed. |
| 49 | S&F in repair pillar tap, cast copper alloy, with capstan heads, 15mm bore dia of pipe chromium plated screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed |
| 50 | S&F in repair of Brass CP suitable for centre hole basin mixer for mixing hot & cold water (as per sample) screwed down for 15mm bore dia of pipe & 450mm long iron pipe and fixed cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 51 | 15mm bore brass sink/ wall mixer 3-in-1 for mixing hot and cold water with screwed down for both ends for iron pipe or union (fixed in repairs), complete all as specified and directed. |
| 52 | S&F in repair PVC connection, 45cm long, 15mm in size with PTMT nust and PVC washers at both ends complete all as specified |
| 53 | S&F in repair 15mm Angle/stop/gate valves, fancy type chromium plated, screwed down, high pressure with crutch or butter fly handle screwed at two right angles ends for both iron pipe incl necessary cement work and making the surface good complete all as specified |
| 54 | S&F in repair stop/gate valve,15 mm cast copper alloy chromium plated fancy type with long shank & cup (concealed type) with capstan heads, screwed down, high pressure, with crutch or butterfly handle screwed for 15mm bore iron fixed complete |
| 55 | S&F in repair brass chromium plated shower rose of 125mm size, with or without swivel joints including fixing to GI pipe complete all as specified |
| 56 | S&F in repair stainless steel tubular towel rail 20mm dia , D type, 60cm long between flanges complete all as specified |
| 57 | S&F in repair Soap dish stainless steel chromium plated fixed with brass screws and rawl plug complete all as specified . |
| 58 | S & F in repair for 600 mm X450 mm looking mirror of any size 5.5mm thick with aluminium frame selected quality mounted on 6mm thick commercial ply wood and fixed to wooden plugs with chromium plated brass screw and cup washer complete all as specified |
| 59 | S & F in repair PTMT grating 125mm dia circular of approved make and fixing with cement mortar 1:3 on Nahani Trap or floor trap complete all as specified. |
| 60 | S&F in repair 110mm bore dia PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls with clamps, complete all as specified and directed. |
| 61 | S&F in repair 75mm bore dia PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls with clamps, complete all as specified and directed. |
| 62 | S&F in repair 110mm bore dia PVC (SWR) bends,any radius (larger bore measured), complete all as specified and directed. |
| 63 | S&F in repair 110mm bore dia PVC (SWR) bends,any radius (larger bore measured), with oval access dooe, complete all as specified and directed. |
| 64 | S&F in repair 75mm bore dia PVC (SWR) bends,any radius (larger bore measured), complete all as specified and directed. |
| 65 | S&F in repair 110mm bore dia PVC (SWR) bends,any radius (larger bore measured), with oval access dooe, complete all as specified and directed. |
| 66 | S&F in PVC floor trap 75mm with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 with CP grating with or without hole for waste pipe complete all as specified and directed. |
| 67 | Cleaning of floor trap and applying of cement around the floor trap with sealant compound for arresting the seepage all as specified and directed by Engr-in-Charge. |
| 68 | S&F in repair stainless steel shelf assembly, 12 cm wide with chromium plated bracket guard and railing 60 cm long, complete all as specified. |
| 69 | S&F in repair rubber door seal 32mm wide with Aluminium strip of size 19mm wide fixed with machine steel screw with washer, complete all as specified and directed. |
| 70 | S&F in repair corner stainless steel shelf assembly (as per sample) of size not less then 300x300x70mm with chromium plated brackets double guard and railing complete all as specified and directed. |
| 71 | S&F 250 mm dia CP brass Towel Ring (as per sample) fixed with SS screws and rawlplug complete all as specified and directed. |
| 72 | Rotational moulded polythylene 500 litres capacity water storage tank (Cylindrical vertical with closed top), 3 layer hoisted and fixed in position including 20mm brass ball valve high pressure with brass rod & high density plastic ball including dismanting of water tanks of capacity exc 250 ltrs but not exc 500 ltrs and removing from site, complete all as specified and directed. |
| 73 | Rotational moulded polythylene 1000 litres capacity water storage tank (Cylindrical vertical with closed top), 3 layer hoisted and fixed in position including 20mm brass ball valve high pressure with brass rod & high density plastic ball including dismanting of water tanks of capacity 1000 ltrs and removing from site, complete all as specified and directed. |
| 74 | Supply and fixing in repairs PVC tank cover/lid of any decription (simple/threaded) for 500/1000 ltr over head tank complete all as specified. |
| 75 | S&F stainless steel auto, zero crank hinges, fancy type withconcealed pattern fitted to shutters, complete all as specified and directed. |
| 76 | Supply only 100 mm Hasp and staple, safety type, aluminium anodised hinge pin including bolt to hinge plate and fixed with screws |
| 77 | S&F Telescopic type Side channel of drawer of standard size including roller for moving drawer made out of mild steel bright finish or electro galvanised ( soft close ball bearing runners) with width of flap 30mm & 60mm long complete all as specified and directed. |
| 78 | S& F Magnetic catcher (as per sample) fixed with Nut and bolt complete all as specified and directed. |
| 79 | S&F in repair 18mm thick HDHMR (High density high mositure resistance) one side decorated Pre laminated board, density not less than 850 kg per Cum, confirming to IS as in kitchen Cabinet, cupboard, ward robe and like fixed with suitable nails ( edgeing laps screws) to steel/wooden frame complete all as specified and directed. |
| 80 | S&F in repair 5mm thick HDHMR (High density high mositure resistance) one side decorated Pre laminated board, density not less than 850 kg per Cum, confirming to IS as in kitchen Cabinet, cupboard, ward robe and like fixed with suitable nails (edgeing laps screws) to steel/wooden frame complete all as specified and directed. |
| 81 | S&F 100mm long, stainless steel brignt finish handle fixed with nut and bolt /screws, complete all as specified and directed |
| 82 | S&F kitchen sinks with drainage board made of stainless steel 1mm thick with plugs, washers , PVC waste pipe fixed in repair including waste copling; bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915x460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 83 | S&F in repair stainless steel kitchen plate rack of size 750 x 900 mm not less than 1mm thick sheet thickness of approved make fixed with mild steel screw complete all as specified and directed. |
| 84 | 35mm thick, 2nd class hardwood (Sal/ Hollock) factory made glazed and skeleton shutters, open rebated and prepared to receive glass or gauge,etc. with sash bars, edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing gauge sizes of members of shutters as specified in SSR Part-I Section-8, clause 8.20 (a) for door shutter supplying and fitted to chowkats including preparation and two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. |
| 85 | 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on bothsides both faces is covered with commercial face veneer including two coat of synthetic enamel paint over a coat of pink primer, fitted to chowkats, complete all as specified and directed. |
| 86 | Factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter with CNC cutting of 35mm size prefinished with UV coating comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately). |
| 87 | M&L10mm thick rendering in cement mortar 1:6 on fair faces of brick work surace rendering is to be even and smooth with out using extra cenent complete all as specified and directed |
| 88 | M&L15mm thick rendering in cement mortar 1:4 on fair faces of brick work surace rendering is to be even and smooth with out using extra cenent complete all as specified and directed |
| 89 | M&L 5 mm thick cement plaster in cement mortar 1:3 on celling surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 90 | M&L for Preparation new surface of wall and applying two coat of oil emulsion distemper over a coat of 1 mm thick wall putty complete all as specified and directed. |
| 91 | Preparation of new plastered surface of external wall and chajjas and making the surface smooth with sand paper and priming the surface with alkali resistance primer paint for external surface, over primed surface applying two coat of cement base paint incl curing complete all as specified & directed. |
| 92 | M&L for three coats of white wash on newly plastered surfaces of ceiling including prepration of new surfaces complete all as specified and directed. |
| 93 | PCC type C-1, 1:3:6 (using 20mm graded crushed stone aggregate) as in plinth protection 75mm thick laid in slope finished even and fair including making joints not more than 2.5 m (or as directed) and at corner, filled with bitumen 85/25 and sand in ratio 1:2 by weight complete all as specified and directed. |
| 94 | Notes : - Rate quoted in BOQ by contractor in respect of subject work against following items shall be inclusive of provision of Making arrangement for establishment of centralized complaint centre for offline complaints as under :- (a) The contractor shall note that contractor or his rep shall report to maint cell (except Sunday and Holiday) dailly to collect the complaints to concerned JE and deposit the same after completion of complaints above items are included the rates above.(b) On both copies of complaint slip, status of the complaint attended shall be endorsed by the complaint/user. One copy to be retained by the complainant and second copy to be with tradesmen for handing over in the complaint centre. Reasons for non attending of complaint etc shall be recorded alongwith estimate of expected time to attend and rectifying the complaint. (c) At the end of each day, summary of complaints shall be prepared and generated indicating No of complaints lodged, attended in time, Reasons for not attending, probable time required for attending the pending complaints etc (d) JE in charge of MES will review the complaints recorded in register and will carry out personal inspection of complaints attended and its status and will take remedial measures in this regard. (e) AGE shall visit the complaint cell at least twice a week to check the complaints recorded and their remarks accordingly. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 01, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 08, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 4 daysOct 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysOct 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender