Tender For Certain Misc Repair Of Office Building , Air Crew Room, Tech Bldg, Hangers, Hard Standing And Connected Works At Army Avn Sqn (R&O) Under Age B/R-I And Age E/M-I Of Ge 865 Ews
Tender Value
90.64 Lakhs
Estimated cost
Bid Submission
08 Oct 2026
0 days left
EMD
1.61 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
leh → Ladakh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Certain Misc Repair Of Office Building , Air Crew Room, Tech Bldg, Hangers, Hard Standing And Connected Works At Army Avn Sqn (R&O) Under Age B/R-I And Age E/M-I Of Ge 865 Ews
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including wall cement mortar, bedding (but not backing) and rubbish off premises, complete all as specifed and/or as directed by Engr-in-Charge. |
| 2 | Demolition of stone (laid flat or on edges) or brick, tiles in floors laid bedded and pointed in any mortar, complete all as specifed and/or as directed by Engr-in-Charge. |
| 3 | Demolition of cement concrete in ground floor and paving not exc 15 cm thick below or above ground level, complete all as specifed and/or as directed by Engr-in-Charge. |
| 4 | M&L for 25 mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate as in sub base of floor, complete all as specifed and/or as directed by Engr-in-Charge. |
| 5 | M&L for non-skid ceramic coloured tiles 7 to 8 mm thick (squre/rectanglar) area of each tile exceeding 0.18 sqm but not exc. 0.38 sqm, in floors over 15 mm screed bed or bedding layers in cement mortar 1:4 set and jointed in neat cement slurry and pointed in colour cement to match, complete all as specifed and/or as directed by Engr-in-Charge. |
| 6 | M&L for glazed (coloured) ceramic tiles of size 350mm x 250mm x 7mm / 450mm x 350mm x 7mm thick, as on vertical surfaces, over 10 mm thick rendering in cement mortar 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement as in dado, skirting etc. to match with the shade of tiles, complete all as specifed and/or as directed by Engr-in-Charge. |
| 7 | M&L for hard wood 2nd class factory made wooden boarded floors 10mm thick and skirtings planed one side & edges tonged and grooved or rebated , including backing with thermocol sheets, complete all as specifed and/or as directed by Engr-in-Charge. |
| 8 | Dismantling boarding / wooden flooring of any description, fixed in any positon. |
| 9 | M&L for 75 mm thick cement concrete 1:3:6 type C-2 using 40 mm graded aggregate, complete all as specifed and/or as directed by Engr-in-Charge. |
| 10 | M&L for sand filling under floors in foundation and laying interlocking paver blocks including watering and consolidation, complete all as specifed and/or as directed by Engr-in-Charge. |
| 11 | M&L for machine pressed precast concrete interlocking paver block of any shape and size with grey cement and pigment conforming to IS 15658-2006 of 60 mm thickness M-35 grade, complete all as specifed and/or as directed by Engr-in-Charge. |
| 12 | M&L for machine pressed precast concrete interlocking paver block of any shape and size with grey cement and pigment conforming to IS 15658-2006 of 80 mm thickness M-35 grade, complete all as specifed and/or as directed by Engr-in-Charge. |
| 13 | M&L for machine cut kota stone slab flooring 20-25 mm thick over cement screed bed 20mm thick in CM 1:6, set and jointed in neat cement slurry laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing, complete all as specifed and/or as directed by Engr-in-Charge. |
| 14 | M&L for chequered cement concrete tiles (glazed) 30cm X 30cm X 20mm thick, set, pointed & jointed in neat cement slurry in floors polished with grey cement & pigments laid over 20mm thick cement screed base (1:6), complete all as specifed and/or as directed by Engr-in-Charge. |
| 15 | Dismantling wrought iron or mild steel work of any description not otherwise provided for angle iron or flat iron as in post and guard bars or grating, complete all as specifed and/or as directed by Engr-in-Charge. |
| 16 | S&F MS rolled sections in main and cross beams, hip and jack rafters; purlins where connected to common rafters running rails and guids for sliding doors; fixed with angle cleats or other connecting plates and similar work conforming to Fe-290, Gde-E-165, complete all as specifed and/or as directed by Engr-in-Charge. |
| 17 | M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer over 10cm in width or girth, complete all as specifed and/or as directed by Engr-in-Charge. |
| 18 | Dismantling plain or corrugated steel / fibre sheeting any guage thickness including nanital or similar pattern, complete all as specifed and/or as directed by Engr-in-Charge. Note : Height approx 9 m from floor level incl. provn of hydra as per ground required. |
| 19 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mps as in roof covering / cladding to wall fixed with self tapping screws, complete all as specifed and/or as directed by Engr-in-Charge. Note :Height approx 9m from floor level incl. provn of hydra as per ground required. |
| 20 | S&F 0.63mm thick galvanised corrugated mild steel sheeting with tow corrugations side lap, fixed with coach screws and washers in roofs walls etc. with grade of zinc coating 275, complete all as specifed and/or as directed by Engr-in-Charge. Note: Height approx 9 m from floor level incl. provn of hydra as per ground required. |
| 21 | S&F plain, galvanised, mild steel sheeting 1 mm thick in stepped flashings (measured as the minimum rectangle from which the pieces can be cut) welded or soldered joint are provided, complete all as specifed and/or as directed by Engr-in-Charge.Note : Height approx 9 m from floor level incl. provn of hydra as per ground required. |
| 22 | Dismantling framed wooden fillets, rails, posts, rafters, purlins, grids for ceiling & wall panelling etc. under 40 sqcm in section unframed work, complete all as specifed and/or as directed by Engr-in-Charge. |
| 23 | M&L for 2nd class soft wood clean sawn as in battens for grids of ceiling & lining fixed with nails exc. 13 sqcm and not exc. 25 sqcm in section including dismantlng, complete all as specifed and/or as directed by Engr-in-Charge. |
| 24 | M&L for 2nd class soft wood clean sawn as in beeding for edges of ceiling, lining or wooden flooring work fixed with nails exc. 6 sqcm and not exc. 13 sqcm in section including dismantlng, complete all as specifed and/or as directed by Engr-in-Charge. |
| 25 | Dismantling wall and ceiling boards (Fiber, pulp, insulation, blankets) any thickness including covered fillets and supporting members, complete all as specifed and/or as directed by Engr-in-Charge. |
| 26 | M&L for 9mm thick prelaminated particle board medium interior grade, prelaminated one side with decorated choice lamination & other side balancing white lamination fixed with nails to timber frame work as in wall panelling, shelves/boarding, complete all as specifed and/or as directed by Engr-in-Charge. |
| 27 | M&L for 9mm thick prelaminated particle board medium interior grade, prelaminated one side with decorated choice lamination & other side balancing white lamination fixed with nails to timber frame work as in ceiling panelling, shelves/boarding, complete all as specifed and/or as directed by Engr-in-Charge. |
| 28 | M&L 6mm (5 ply) thick veneered decorative (Knoty Pine) plywood, grade 1 (with BWR resin) with decorative face veneers on one face, fixed with nails to timber frame work in wall, complete all as specifed and/or as directed by Engr-in-Charge. |
| 29 | M&L 6mm (5 ply) thick veneered decorative (Knoty Pine) plywood, grade 1 (with BWR resin) with decorative face veneers on one face, fixed with nails to timber frame work in ceiling, complete all as specifed and/or as directed by Engr-in-Charge. |
| 30 | M&L for prelaminated particle board , 18/19 mm thick both side interior grade , prelaminated on side with decorative choice laminated & other side balancing white lamination fixed with screws to timber frame work, complete all as specifed and/or as directed by Engr-in-Charge. |
| 31 | S&F Piano/continuous hinge of size 40 mm (when open) stainless steel, complete all as specifed and/or as directed by Engr-in-Charge. |
| 32 | S&F 125mm hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws, complete all as specifed and/or as directed by Engr-in-Charge. |
| 33 | S&F auto closing hinges 35 mm of 0 crank( KH-001) or 8 crank (KH-002) openable at 110 degree for cabinet shutters complete in all respect and fixed in position, complete all as specifed and/or as directed by Engr-in-Charge.Make : KAFF/Hettich or equivalent as approve by GE. |
| 34 | S&F tower bolts 250mm long of stainless steel 304 finished/of outer plate metal matt finished complete fixed in position, complete all as specifed and/or as directed by Engr-in-Charge.Make : Harrison (Cat No 0812) or equivalent as approved by GE. |
| 35 | S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 200mm long matt finished complete fixed in position, complete all as specifed and/or as directed by Engr-in-Charge.Make : Harrison (Jasmine) or equivalent as approved by GE. |
| 36 | S&F ball catchers 304 grade stainless steel finished suitable for cabinets premium quality complete fixed in position as per manufacturer's instructions, complete all as specifed and/or as directed by Engr-in-Charge.Make : Hettitch or equivalent as approved by GE. |
| 37 | S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 150mm long matt finished complete fixed in position, complete all as specifed and/or as directed by Engr-in-Charge.Make : Harrison (Jasmine) or equivalent as approved by GE. |
| 38 | Taking down chowkats / frames with shutters (without taking off shutters from the frames) area not exc. 1.5 sqm each, complete all as specifed and/or as directed by Engr-in-Charge. |
| 39 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exceeding 1.5 sqm and not exceeding 4 sqm each, complete all as specifed and/or as directed by Engr-in-Charge. |
| 40 | S&F powder coated (minimum thickness of powder coating 50 micron) aluminium frames for door, windows, ventilators with one or more rebates including joining cleat for fixing etc., complete all as specifed and/or as directed by Engr-in-Charge. |
| 41 | S&F powder coated (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, including aluminium jali fixed in one side, side hung type without sash, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading screws, anodised aluminium fittings such as peg stays 150mm long (01 No) hinges type B-21,100mm long (02 Nos) suitable handle (01 No) etc., complete all as specifed and/or as directed by Engr-in-Charge. |
| 42 | S&F factory made aluminium 50 micron powder coated grill, opening size 101.6 X 63.5 mm (4\\"X2½\\") and of approx weight @ 1.345 Kg/sqm, complete fixed in position in windows in all respect, complete all as specifed and/or as directed by Engr-in-Charge. |
| 43 | S&F in repairs galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples, complete all as specifed and/or as directed by Engr-in-Charge. |
| 44 | M&L for sheet glass 5.5mm thick ordinary quality and glazing with oil putty or wooden beads in square not exc. 0.50 sqm in each pane, complete all as specifed and/or as directed by Engr-in-Charge. |
| 45 | S&F 150mm long aluminium anodized, barrel tower bolt of extruded section, complete all as specifed and/or as directed by Engr-in-Charge. |
| 46 | S&F 100mm long aluminium anodized, barrel tower bolt of extruded section, complete all as specifed and/or as directed by Engr-in-Charge. |
| 47 | S&F 150mm size extruded aluminium alloy handles, fabricated type, anodized, complete all as specifed and/or as directed by Engr-in-Charge. |
| 48 | S&F 100 mm size extruded aluminium alloy handles, fabricated type, anodized, complete all as specifed and/or as directed by Engr-in-Charge. |
| 49 | S&F in repairs aluminium (die cast) body door closer hydraulically designation No 3 universal type suitable for door shutter of 851 to 1000mm in width and weight 61 to 80 kg, complete all as specifed and/or as directed by Engr-in-Charge. |
| 50 | S&F floor door stopper (length of cover plate) 150mm long aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floor, complete all as specifed and/or as directed by Engr-in-Charge. |
| 51 | S&F 75mm long aluminium anodized, butt hinges of extruded section, complete all as specifed and/or as directed by Engr-in-Charge. |
| 52 | S&F 100mm long aluminium anodized, butt hinges of extruded section, complete all as specifed and/or as directed by Engr-in-Charge. |
| 53 | S&F 100mm long mild steel butt hinges, medium weight cold rolled 100mm size, complete all as specifed and/or as directed by Engr-in-Charge. |
| 54 | M&L forming contraction (dummy) joints 65 mm deep x 10mm wide, filled with sealing compound Grade 'A' in plinth protection, complete all as specifed and/or as directed by Engr-in-Charge. |
| 55 | S&F 2nd class soft wood plain, solid, straight chowkets and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed, complete all as specifed and/or as directed by Engr-in-Charge. |
| 56 | S&F for 35mm thick 2nd class hard wood plain framed factory made panelled shutters (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers, supply and fixed to chowkats, complete all as specifed and/or as directed by Engr-in-Charge. |
| 57 | S&F 2nd class soft wood 35 mm thick glazed and skelton shutter, open and prapared to receive the glass, gauze etc. (without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc. (Glass / Wiremesh should be measured seperately), complete all as specifed and/or as directed by Engr-in-Charge. |
| 58 | Providing and fixing factory-manufactured insulated PUF (Polyurethane Foam) sandwich panels consisting of pre-painted galvanized steel (PPGI) sheets on both faces with a rigid Polyurethane Foam (PUF) core of specified thickness and density, complete with tongue-and-groove interlocking joints, self-drilling/self-tapping screws, flashings, sealants, accessories and all necessary fittings including dismantling, complete all as specifed and/or as directed by Engr-in-Charge. |
| 59 | Roughening surfaces of old concrete slab by picking, sweeping clean and washing down with water to remove dust etc. and applying evenly cement slurry at the rate of 3 Kg/Sqm over cleaned roof surfaces, complete all as specifed and/or as directed by Engr-in-Charge.. |
| 60 | APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (weight not less than 150 gms/sqm) land on primed surface by forced application, complete all as specifed and/or as directed by Engr-in-Charge. |
| 61 | M&L for preparation of old treated steel surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamelled paint, complete all as specifed and/or as directed by Engr-in-Charge. |
| 62 | M&L for preparation of old treated steel surface of any description and exceeding 10cm width or girth and applying two coat of synthetic enamelled paint and by coating with mordant solution including washing and cleaning etc., complete all as specifed and/or as directed by Engr-in-Charge. |
| 63 | M&L for PCC (1:4:8) type D-2 using 40mm graded aggregate as in foundation, filling and mass concrete, complete all as specifed and/or as directed by Engr-in-Charge. |
| 64 | Demolition of brick work or stone/ boulder masonry, build in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facings, dressed stone work, complete all as specifed and/or as directed by Engr-in-Charge. |
| 65 | M&L for walling random rubble, brought upto courses well bonded, bedded and solidly hearted, built in CM 1:4, complete all as specifed and/or as directed by Engr-in-Charge. |
| 66 | M&L for pointing to random rubble or polygonal rubble uncoursed or brought up to courses built in cement mortar, complete all as specifed and/or as directed by Engr-in-Charge. |
| 67 | M&L for precast cement concrete (20mm graded crushed stone aggregate) 1:3:6 type C-1 as in block masonery with solid blocks exc. 10cm in width and setting in cement mortar 1:6, complete all as specifed and/or as directed by Engr-in-Charge. |
| 68 | M&L for 15mm thick rendering on fair faces of brick works finished even and smooth without using extra cement in cement mortar 1:4 including taking down, complete all as specifed and/or as directed by Engr-in-Charge. |
| 69 | Taking down carefully and refixing by mechanical means steel hanger door shutters leaf of size 5.50 x 4.00m and keeping aside off the ground repairing the parts /members of door incl. minor repairs wedling as required greasing and removing unserviceable members unserviceable CGI/PGI sheet pully nut and bolts etc.complete all as specifed and/or as directed by Engr-in-Charge. (Hanger door repair incl. provn of hydra as required) |
| 70 | Demolition of cement concrerte of any description and in any position not otherwies specifically provided for and removing surplus soil to a distance not exc. 100m and depositing where directed at a level not exc. 1.5m above the starting point, complete all as specifed and/or as directed by Engr-in-Charge. |
| 71 | M&L for cement concrete work in pavement / hard standing of flexural strenth 40 kg/sqcm in field using 400 kg cement per cubic meter thickness of concrete 15 cm, complete all as specifed and/or as directed by Engr-in-Charge.Note : laid in panels between thickness of concrete. |
| 72 | Forming contraction (dummy) joints 65 mm deep x 10 mm wide filled with sealing compound grade A, complete all as specifed and/or as directed by Engr-in-Charge. |
| 73 | Forming 20mm thick expansion joints filled with pre-formed bituminous filler and top 30 mm primed and sealed with sealing compound graded B as in 200 mm thick slab, complete all as specifed and/or as directed by Engr-in-Charge. |
| 74 | Taking down carefully copper/aluminium point wiring (light, fan, socket and power point) complete fittings such as switches, ceiling rose, regulators, socket etc. and removing material from site and making good disturbed surfaces of walls, floors/ceiling to match the existing surface, complete all as specifed and/or as directed by Engr-in-Charge. |
| 75 | Point wiring complete with 1.5 sqmm nominal area of copper conductor multi stranded PVC insulated and unsheathed 1100 volts cable drawn through & including PVC casing & caping with standard accessories such as elbows, tees, junctions etc. and PVC moulded terminal box with top cover of including PVC insulated unsheathed solid 1.5 sqmm copper conductor cable as continuous earth lead, complete all as specifed and/or as directed by Engr-in-Charge. |
| 76 | One light point / fan controlled by one way switch. |
| 77 | One switch socket outlet 6 Amps, 230 volts point on independent board. |
| 78 | One switch socket outlet 6 Amps, 230 volts point on same board. |
| 79 | All as per Srl item No 75 above, but using cables 4 sqmm size. |
| 80 | Supply and replacement of switch piano flush button single pole 6 Amps 230 volts one way, complete all as specifed and/or as directed by Engr-in-Charge. |
| 81 | Supply and replacement of switch socket outlet two in one 5 pin 6 Amps flush type 230 volts, complete all as specifed and/or as directed by Engr-in-Charge. |
| 82 | Supply and replacement of switch socket combination outlet multi purpose 5 pin 6 Amps and 16 Amps 230 volts, complete all as specifed and/or as directed by Engr-in-Charge. |
| 83 | Supply and replacement of ceiling rose, surface bakelite three terminals, complete all as specifed and/or as directed by Engr-in-Charge. |
| 84 | S&F in replacement of sheet metal enclosure for DBs double door when MCB's to be used single pole & neutral 240 volts 12 ways, complete all as specifed and/or as directed by Engr-in-Charge. |
| 85 | S&F in replacement of sheet metal enclosure for DBs double door when MCB's to be used single pole & neutral 240 volts 08 ways, complete all as specifed and/or as directed by Engr-in-Charge. |
| 86 | S&F in replacement of MCB SPN 63 Amp 240 volts AC ISI marked, complete all as specifed and/or as directed by Engr-in-Charge. |
| 87 | S&F in replacement of MCB SP 6-32 Amps 240 volts 50 Hz, complete all as specifed and/or as directed by Engr-in-Charge. |
| 88 | S&F only in replacement of LED light fitting 1X20 W, 220 V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specifed and/or as directed by Engr-in-Charge. |
| 89 | Taking down old unserviceable high bay light and supply and fix in replacement LED high bay light fitiing 150 watt 230 Volt AC outdoor type with high pressure die cast aluminium and heat resistant complete with driver, lamp cracket with impact and corosion resistant including thermal management in multiple optics complete with IP65/66 protection at any height as per site condition (including provn of Hydra as per site requriment), complete all as specifed and/or as directed by Engr-in-Charge. |
| 90 | Taking down old unserviceable Flood light and supply and fix in replacement LED flood light fitiing 150 watt 230 Volt AC outdoor type with high pressure die cast aluminium and heat resistant complete with driver, lamp cracket with impact and corosion resistant including thermal management in multiple optics complete with IP65/66 protection at any height as per site conditions (including provn of Hydra as per site requriment), complete all as specifed and/or as directed by Engr-in-Charge. |
| 91 | M&L for sub-main wiring with two single core FRLS PVC insulated, unsheathed, multistranded copper conductor cable of size 10 sqmm 1100 volts grade and including non metallic rigid 25 mm dia PVC casing caping with all fitting and fixing accessories and including PVC insulated unsheathed, multistranded copper conductor cable of size 10 sqmm for earth continuity conductor and including taking down old unserviceable sub main wiring, complete all as specifed and/or as directed by Engr-in-Charge. |
| 92 | Supply and laying in replacement of XLPE insulated, armoured, heavy duty electric cables with stranded aluminium conductor rating 1100 volts grade of size 16 sqmm 2.0 core laid in trenches or passing through pipes, ducts or fixed to walls/poles including taking down old unserviceable cable covers, complete all as specifed and/or as directed by Engr-in-Charge. |
| 93 | M&L for sub-main wiring with two single core FRLS PVC insulated, unsheathed, multistranded copper conductor cable of size 2.5 sqmm 1100 volts grade and including non metallic rigid 25 mm dia PVC casing caping with all fitting and fixing accessories and including PVC insulated unsheathed, multistranded copper conductor cable of size 2.5 sqmm for earth continuity conductor and including taking down old unserviceable sub main wiring,complete all as specifed and/or as directed by Engr-in-Charge. |
| 94 | S&F in replacement of exhaust fan, steel body AC single phase 230V of size 300mm sweep with blades and frame and louvers, complete all as specifed and/or as directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayOct 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender