Tender For Addition / Alteration Cum Special Repairs To Certain Otm Accn At Pachmarhi Mil Stn
Tender Value
3.89 Crore
Estimated cost
Bid Submission
19 Oct 2026
4 days left
EMD
4.64 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hoshangabad → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition / Alteration Cum Special Repairs To Certain Otm Accn At Pachmarhi Mil Stn
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 01-Oct-2026 | c2 | Date | 15-Oct-2026 |
| 2 | 08-Oct-2026 | Corrigendum No 03 | Date | 19-Oct-2026 |
| 3 | 08-Oct-2026 | c4 | BOQ | 19-Oct-2026 |
| 4 | 05-Oct-2026 | c3 | BOQ | 19-Oct-2026 |
| 5 | 01-Oct-2026 | c2 | Date | 15-Oct-2026 |
| 6 | 26-Sep-2026 | C1 | BOQ | 15-Oct-2026 |
| 7 | 26-Sep-2026 | C1 | BOQ | 08-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | SCHEDULE \\"A\\" |
| 2 | Item No 01 : Demolition of cement concrete un reinforced in ground floor and paving n exc 15cm thick (below or above ground level) complete all as specified and directed. |
| 3 | Item No 02 : Dismantling floor, walls, roof tiles including bedding but not backing and rubbish off premises complete all as specified and directed. |
| 4 | Item No 03 : Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 5 | Item No 04 : Taking down cement plaster any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed. |
| 6 | Item No 05 : Taking down chowkats or frames not exc 1.5 Sqm each with shutters (without taking off shutters from the frames) incl making good the disturbed portion complete all as specified and directed. |
| 7 | Item No 06 : Taking down chowkats or frames exc 1.5 sqm but not exc 4.0 Sqm each with shutters (without taking off shutters from the frames) incl making good the disturbed portion complete all as specified and directed. |
| 8 | Item No 07 : Taking down shutter of any description exc 1 sqm and not exc 2 sqm each and removing to store. |
| 9 | Item No 08 : Demolition of reinforcement cement concrete above ground floors n exc 15 cm thickness (Reinforcement cut as required to facilitate demolition) such as cooking platform, chajjas etc complete all as specified and directed. |
| 10 | Item No 09 : Taking up or down steel tubing and connections including cleaning if refixing required for 15 mm bore of pipe complete all as specified and directed. |
| 11 | Item No 10 : Taking up or down steel tubing and connections including cleaning if refixing or removal to store of 20 mm dia of pipe complete all as specified and directed. |
| 12 | Item No 11 : Taking down AC/PVC pipes (including all fittings), with spigot and socket ends lead joints including burning out joints of 100 mm dia pipe complete all as specified and directed. |
| 13 | Item No 12 : Dismantling water tanks and removing to store of capacity exc 500 and n exc 1000 ltrs all as specified. |
| 14 | Item No 13 : Dismantling water tanks and removing to store of capacity exc 250 and n exc 500 ltrs all as specified. |
| 15 | Item No 14 : Dismantling timber scantlings 40 sqcm and over in section as in framed work in any position complete all as specified and directed. |
| 16 | Item No 15 : Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 17 | Item No 16 : Dismantling of asbestos cement sheets in roof coverings complete all as specified and directed. |
| 18 | Item No 17 : Dismantling of ceiling board with fittings and any description including cover fillets and dir. |
| 19 | Item No 18 : M&L for 25 mm thick cement concrete (1:2:4), type B-0, using 12.50 mm graded aggregate as in floors for receiving kota stone tiles complete all as specified and directed. |
| 20 | Item No 19 : M&L for 75mm thick PCC (1:3:6), type C-2 using 40mm graded stone aggregate as in plinth protection, surface finished even & smooth without using extra cement, with and including joint filling (Size 30mm deep x 10mm wide) with sealing compound grade-A at 3m interval and corner complete all as specified and directed. |
| 21 | Item No 20 : Material and labour for machine cut kota stone slab 20-25 mm thick (of size not less than 55 cm x 55 cm) laid and jointed with grey cement slurry mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing (Granite finish) over and including cement screed bed 20 mm thick in cement mortar (1:6) base including rubbing and mirror polishing, complete all as specified. |
| 22 | Item No 21 : Material and labour for machine cut kota stone slab 20-25 mm thick laid and jointed with grey cement slurry mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing (Granite finish) but as in skirting over and including 10mm thick plaster in cement mortar (1:4) on brick work or concrete surfaces, complete all as specified. |
| 23 | Item No 22 : M&L for coloured vitrified Ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 24 | Item No 23 : M & L for non skid coloured ceramic tiles 7 to 8mm thick square / rectangular area of each tile exc 0.18Sqm but not exc 0.36Sqm as in floor laid over 15 mm thick screed bed in CM 1:6 as in floor etc. set and jointed in neat cement slurry and pointed in coloured cement to match colour tiles including 15 mm thick screed bed in CM 1:6 complete all as specified. |
| 25 | Item No 24 : M & L for non skid coloured ceramic tiles 7 to 8mm thick square/rectangular area of each tile exc 0.11 Sqm but not exc 0.18Sqm as in floor laid over 15 mm thick screed bed in CM 1:6 as in floor etc. set and jointed in neat cement slurry and pointed in coloured cement to match colour tiles complete all as specified. |
| 26 | Item No 25 : M & L for Glazed ceramic coloured tiles in vertical surface 350x250x7mm/ 450x300x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering in cm 1:4 complete all as specified. |
| 27 | Item No 26 : M&L Brick work with Fly ash old size bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 28 | Item No 27 : M&L Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM (1:6) all as specified. |
| 29 | Item No 28 : M&L 15 mm thick rendering on fair faces of bk/concrete surfaces in CM (1:6) finished even and smooth (without using extra cement) on internal surfaces complete all as specified. |
| 30 | Item No 29 : M & L for rendering 15mm thick on other than fair faces of brick or concrete surfaces internal in cement plaster 1:4 using WPC 3% by weight of cement (WPC to be measured and paid separately) and finished even and smooth (without using extra cement). |
| 31 | Item No 30 : Material and Labour for 5mm thick cement plaster in CM (1:3) to ceiling surface and finished the surface even and smooth without using extra cement complete all as specified. |
| 32 | Item No 31 : Supply only water proofing compound, ISI marked. |
| 33 | Item No 32 : S&F solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet, reinforced with MS square tube, fixing in same opening complete all as specified and directed. |
| 34 | Item No 33 : S&F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top, bottom and side rails, MS frame shall be covered with heat molded plain colour PVC \\"C\\" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side and as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fixed in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement and fixing in the frame at site complete all as specified and directed. |
| 35 | Item No 34 : S&F pressed steel frame size (106 x 60 mm) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete as specified. |
| 36 | Item No 35 : S&F pressed steel frame size (120 x 60 mm) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete as specified. |
| 37 | Item No 36 : Supply and fixing factory made flush shutters 40 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides, ISI marked complete all as specified. |
| 38 | Item No 37 : S & F 35 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain chamfered or rounded filled with cut and mitred beads for securing glass etc fitted to chowkhats for doors etc complete. |
| 39 | Item No 38 : M&L type C1 Cement concrete 1:3:6 (20 mm graded aggregate) for insertion of hold fast, in MS door frame etc. incl. necessary form work etc complete all as specified and directed. |
| 40 | Item No 39: M&L Aluminium powder coated (powder coated of required colour) doors frame top & sides of size 92x31.75x1.50 mm (section No 20831), bottom size 92x31.75x1.50mm (section No 20832) and shutter top & bottom of size 40x18x1.55mm (section No 20736) and sides (handle) of size 40x18x1.55mm (section No 20738) and lock side shutter frame of size 40x18x1.45mm (section No 20737)\\" including rubber gasket, beading and locking arrangement including making good to the disturbed portion complete including stainless steel wire mesh 0.36mm nominal dia of wire with 1.40mm average aperture and fixed with stainless steel wire staples and including and fixing 5mm thick glass with necessary rubber beading gasket etc including necessary plaster, painting, cill and making good to disturbed portion all as specified and as directed |
| 41 | Item No 40: M&L Aluminium powder coated (powder coated of required colour) three track sliding windows frame top & sides of size 92x31.75x1.50 mm (section No 20831), bottom size 92x31.75x1.50mm (section No 20832) and shutter top & bottom of size 40x18x1.55mm (section No 20736) and sides (handle) of size 40x18x1.55mm (section No 20738) and lock side shutter frame of size 40x18x1.45mm (section No 20737)\\" with including and fixing rubber gasket, beading and locking arrangement including making good to the disturbed portion complete including & fixing stainless steel wire mesh 0.36mm nominal dia of wire with 1.40mm average aperture and fixed with stainless steel wire staples and including and fixing 5mm thick glass with necessary rubber beading gasket etc including necessary plaster, painting cill and making good to disturbed portion all as specified and as directed |
| 42 | Item No 41: S&F aluminium powder coated ventilator louvers type frame top and bottom of size 31x42x1.00mm(sec no-20558) rectangular tube of size 40x20x2 mm (sec no-14019 and middle vertical of size 42x46.20x1.60mm sec(20560) and clip for fixing wiremesh and glass of size 19x17.30x0.90mm (sec no-19360) thick including and fixing stainless steel wire cloth 0.38mm nominal dia of wire and 1.40mm average width of aperture and fixed with stainless steel wire staples and supply and fixing 5mm thick louvers with blades of 100 mm heavy duty with necessary rubber beading gasket etc including necessary plaster, painting cill and making good to disturbed portion all as specified and directed |
| 43 | Item No 42: S&F aluminium anodised grill of 7.00 mm dia squares rectangular triangular circular shape aperture n.exc 7.00cm in length or width fixed with H or F channel make grill No. 20 of décor or equivalent |
| 44 | Item No 43: M&L Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars, barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanks and similar work conforming to Fe 290.Gde-E-165 complete all as specified and directed. |
| 45 | Item No 44: S&F 100 mm size Aluminium alloy with galvanised mild steel hinge pin anodised and fixed type B-22 complete all as directed. |
| 46 | Item No 45: S&F 100 mm size MS butt hinges medium weight cold rolled fixed with screws to frame complete all as directed. |
| 47 | Item No 46: Supply & fixing Aluminium alloy pressed handle oval type stove enamelled black of 150mm long fixed with screw to shutter complete all as specified and directed |
| 48 | Item No 47: Supply & fixing Aluminium barrel tower bolt of 150mm long stove enamelled black with bright bolt complete all as specified and directed. |
| 49 | Item No 48: S & F 300 mm aluminium alloy, anodised sliding door bolt ISI marked with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete all as specified and directed. |
| 50 | Item No 49: S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 51 | Item No 50: Hacking out old broken glass (any thickness, size, quality or description) from wooden frames/steel frame glazed with oil putty of fixed with beads complete all as specified and directed. |
| 52 | Item No 51: S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane, complete all as specified and directed. |
| 53 | Item No 52: S&F figured glass 3 mm thick, pin head type and glazing with oil putty in squares not exc 0.5 sqm in each pane complete all as specified and directed. |
| 54 | Item No 53: S&F brass hat pegs, solid body, 125mm to 175 mm peg complete all as specified and directed. |
| 55 | Item No 54: M&L RCC 1:2:4 (using 20mm stone aggregate) Kitchen platforms, roofs, landings, balconies, canopies, deck slabs and in shelves and the like incl necessary form work complete all as specified and directed. |
| 56 | Item No 55 : M&L for precast reinforced cement concrete (1:2:4) type B1 using 20mm graded stone aggregate for cover slabs of manholes, cover slab set in CM 1:4 side portion only with plain surfaces including necessary form work (reinforcement to be measured and paid separately) complete all as specified and as directed. |
| 57 | Item No 56: M&L for mild steel TMT bars as in reinforcement, 10mm dia and over cut to length, bent to shape required including cranking, bending hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 58 | Item No 57: S&F tubes 15mm bore medium grade galvanised with all fittings, fixed to walls and ceilings or laid in floors complete all as specified and directed. |
| 59 | Item No 58: S&F tubes 20mm bore medium grade galvanised with all fittings, fixed to walls and ceilings or laid in floors complete all as specified and directed. |
| 60 | Item No 59: S&F in repair 15 mm dia bib tap cast copper alloy (fancy type), chromium plated, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified and directed. |
| 61 | Item No 60: S&F in repair pillar taps, 15 mm bore cast copper chromium plated fancy type screwed down, high pressure, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 62 | Item No 61: S&F in repair stop valve, cast copper alloy, fancy type, chromium plated with long shank and cup (Concealed type), screwed down both ends for high pressure, as per ISI suitable for 15mm dia iron pipe all as directed. |
| 63 | Item No 62: S&F in repair angle cock 15mm, cast copper alloy, fancy type, chromium plated with long shank and cup (Concealed type), screwed down both ends for high pressure, as per ISI suitable for 15mm dia iron pipe all as directed. |
| 64 | Item No 63: S&F fixing in repairs 125 mm Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed. |
| 65 | Item No 64: S&F in repair vitreous china wash down water closet pan (pedestal pattern), coloured, with and including plastic water closet seat cover, coloured, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device, (excluding fixing bolts, flushing cistern and flush pipe), complete all as specified and directed |
| 66 | Item No 65: S&F in repair vitreous china squatting pan 'Orissa' pattern WC size 580x440 mm white with integral foot rest and trap and including connection to trap, fixing with existing waste pipe and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor complete all as specified and directed. |
| 67 | Item No 66: S&F in repair vitreous china wash hand basin, white, flat back, size 550mm x 400mm excluding taps, chain and plug and porcelain stopper but including cutting for and pinning in ends of and including brackets, waste pipe & CP brass waste coupling of 32mm dia complete all as specified and directed. |
| 68 | Item No 67: S & F in repairs Vitreous China Half stall type urinals, white, with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; flush pipe complete all as specified and directed. |
| 69 | Item No 68: S&F in repair 10 Ltr capacity PVC valveless syphonic action type low level flushing cistern white with inlet, ball valve, float valve and handle incl bracket and flush pipe of low level of 32mm dia fixed to wall complete all as specified and directed. |
| 70 | Item No 69: S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position in all respect as specified complete all as specified and directed. |
| 71 | Item No 70: S&F PVC connection 15mm dia size and 450 mm long with 2 Nos check nuts its washers complete all as specified and as directed. |
| 72 | Item No 71: S&F in repair 600x450 mm size and 5.5mm thick looking mirror, bevelled edge of selected quality glass with aluminium frame made of channel alround, mounted on 6 mm thick commercial ply or AC building board, fitted to wooden plug with CP screws complete all as specified and directed. |
| 73 | Item No 72: S&F in repair 20mm dia brass chromium plated tubular towel rails, D type 60cm long between flanges complete all as specified. |
| 74 | Item No 73: S&F in repair Toilet paper holder with flat recessed type stainless steel with chromium plated (CP) brass screws and directed complete all as specified |
| 75 | Item No 74: S&F in repair stainless steel soap dish, of standard size and shape complete all as specified. |
| 76 | Item No 75: S&F in repair stainless steel sink with draining board, made out of 1.00 mm thick sheet for kitchen or laboratory with plug, washers, waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x330mm x160mm, including waste coupling & waste pipe complete all as specified and directed. |
| 77 | Item No 76: S&F in repair 25 mm dia stainless steel curtain rod heavy duty (304 grade) with suitable brackets and heads complete all as spo and directed. |
| 78 | Item No 77: S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specified and directed. |
| 79 | Item No 78: S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specified and directed. |
| 80 | Item No 79: S&F 40 mm dia high density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors complete all as specified and directed. |
| 81 | Item No 80: M/L PVC(SWR) bend of 110mm dia of any radius etc complete all as specified and directed. |
| 82 | Item No 81: M/L PVC(SWR) Tee of 110mm dia etc complete all as specified and directed. |
| 83 | Item No 82: S&F PVC (SWR) branch pieces, single (equal or un equal), ordinary or inverted (spigot or socket type) or with parallel branches of 110 mm dia complete all as specified and directed. |
| 84 | Item No 83: M/L PVC(SWR) bend of 75mm dia of any radius etc complete all as specified and directed. |
| 85 | Item No 84: M/L PVC(SWR) Tee of 75mm dia etc complete all as specified and directed. |
| 86 | Item No 85: M&L 110 mm PVC (SWR) vent cowl complete all as specified and directed. |
| 87 | Item No 86: S&F PVC (SWR) multi floor trap, plain with grating with or without waste hole including jointing with solvent cement 75mm dia etc complete. |
| 88 | Item No 87: M&L Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 110mm pipe complete all as specified and directed. |
| 89 | Item No 88: M&L Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75mm pipe complete all as specified and directed. |
| 90 | Item No 89: S&F of 1000 ltr three layer rotational moulded white colour polyethylene water storage tanks (cylindrical vertical with closed top with threaded lid) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed. |
| 91 | Item No 90: S&F of 500 ltr three layer rotational moulded white colour polyethylene water storage tanks (cylindrical vertical with closed top with threaded lid) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed. |
| 92 | Item No 91: S&F 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 93 | Item No 92 : S&F in repairs 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms fixed in repairs complete all as specified and directed. |
| 94 | Item No 93 : S&F in repairs 15 mm ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for 15mm dia iron pipe and fixed. (Minimum weight 210gm) complete all as specified and directed. |
| 95 | Item No 94: M&L Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors: fixed with angle cleats or other connecting plates Fe-290 (Gde E165) complete all as specified as and directed. |
| 96 | Item No 95: S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including dismantling plain or corrugated steel sheeting, any gauge, thickness, in roof covering complete all as specified and directed. |
| 97 | Item No 96: S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in ridges, roof covering/cladding to wall, fixed with self tapping screws as specified including dismantling plain or corrugated steel sheeting, any gauge, thickness, in roof covering complete all as specified and directed. |
| 98 | Item No 97: M&L for suspended false ceiling comprising of 6mm thick non asbestos fibre cement building boards fixed or laid/inserted to GI frame work with screws over GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc. 1.2 m length) of 0.55 mm thickness having knurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified. |
| 99 | Item No 98: M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of primer complete. |
| 100 | Item No 99: M&L for preparation of new steel surfaces any description, any described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red-oxide primer complete. |
| 101 | Item No 100: Removing old paints by paint removers or burning off by blow lamps and cleaning with scrapers, any number of coats, any width or girth complete. |
| 102 | Item No 101: M&L Preparing old wooden surfaces exceeding 10Cm in width or girth and applying two coats of synthetic enamel paint over a coat of primer complete. |
| 103 | Item No 102: M&L Preparing old steel surfaces exceeding 10Cm in width or girth and applying two coats of synthetic enamel paint over a coat of primer complete. |
| 104 | Item No 103: M&L for applying two coats of oil bound distemper on wall or concrete over a coat of primer on prepared surfaces including rubbing with sand paper complete all as specified and directed. |
| 105 | Item No 104: M&L for applying two coats of oil bound distemper on ceiling over a coat of primer on prepared surfaces including, rubbing with sand paper complete all as specified and directed. |
| 106 | Item No 105: M&L for preparation of old decorated surfaces of walls by washing, rubbing down and scrapping of distemper surfaces and applying one coat of oil bound distemper of any light shade complete all as specified and directed.. |
| 107 | Item No 106: M&L for preparation of old decorated plastered or unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and applying two coat of white wash complete. |
| 108 | Item No 107: M&L for preparation of old surfaces of ceilings and apply two coat of white wash complete all as specified and directed. |
| 109 | Item No 108: M&L Preparation of new plastered or unplastered surfaces of wall and applying two coats of cement based paint over a coat of primer complete all as specified as directed. |
| 110 | Item No 109: M&L Preparing old painted surfaces of walls, chajjas etc by washing rubbing down and stopping and applying two coat of cement base paint white or tinted complete all as specified as directed. |
| 111 | Item No 110: Complete removal of existing water proofing treatment from top of roof (flat of sloped) and canopies/chajjas of building including demolition of PCC any thickness and removal of debris out side Md land complete all as specified and directed. |
| 112 | Item No 111: M&L Water proofing treatment on \\"Non approachable / non accessible and approachable roof surface (Horizontal, sloped & Vertical surfaces) in following sequence through manufacturer/authorized applicator of the manufacturer including taking down of existing roof treatment, properly cleaning & drying the concrete surfaces complete: (i) Applying a coat of oxidised bitumen based solvent primer @ 0.3 Kg/Sqm. (ii) Applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 kg/ Sqm incl cleaning surfaces. (iii) Laying /unrolled over the bitumen coated surface, APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt. not less than 150 gms/sqm) laid on primed surface by forced application complete all as specified with 100 mm over laps shall be sealed by flame as per manufacturers instruction. (iv) Applying two coats of bituminous aluminium paint including preparation complete. |
| 113 | Item No 112: M&L for PCC 1:2:4 type B0 (Using 12.50 mm graded stone aggregate) as in roof padding / kerbs / sunken slab etc complete all as specified and directed. |
| 114 | Item No 113: M&L 10 mm thick rendering on roof surfaces / concrete surface in CM 1:4 using WPC 3% by weight of cement (WPC to be measured and paid separately) complete all as specified and directed. |
| 115 | Item No 114: M&L for 18 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including 15 mm thick screed bed in cement mortar edge moulding & cutting hole for gas pipe and similar work and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 116 | Item No 115: S&F in repairs galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed. |
| 117 | Item No 116: S&F in repair Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete. |
| 118 | Item No 117: S&F cabinet with mirror, box type of size 19\\" x 21\\" of colour as approved fixed to wall complete. |
| 119 | Item No 118: M&L cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good in brick walls, cutting not exceeding 10 cm girth complete all as specified and directed. |
| 120 | Item No 119: Mirror polish on kota stone where ever required to give high glossy finish over exciting floor. |
| 121 | Internal Electrification |
| 122 | Item No 120 : Taking down carefully copper/aluminum point wiring (light/fan/socket power) complete, including fixture and fitting such as switches, ceiling roses, pendants, regulators, socket, light fittings etc removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc. |
| 123 | Item No 121 : Taking down existing sub main wiring of any size & type and description including removal of teak wood batten/pipe etc complete. |
| 124 | Item No 122 : M&L for point wiring complete with PVC insulated unsheathed FRLSH multistranded copper conductor cable conforming to IS 694 of size 1.5 Sqmm two single core drawn through in and including PVC concealed conduit pipe 20mm dia medium grade ISI Marked complete with one run of PVC insulated copper conductor cable 1.5 Sq mm single core green colour earth wire and connecting to earth dolly incl colour coding of cable shall be for phase, neutral and earth wire as specified in MES SSR Part I 1991 with terminal boxes concealed on wall with modular inner & outer cover for fixing of switches /sockets/ regulators with screws complete including making good of disturbed surfaces of wall/ceiling/floor in same specification as per existing all as specified and directed. |
| 125 | (Note: i. Rate of modular cover plates with frame and modular metal flush boxes are paid separately in respected items. ii. Rate of 3 way connector to fix fittings are considered in item without any extra cost). |
| 126 | Item No 123 : One light/fan/bell point controlled by one No piano type switch 5 AMPS single pole one way. |
| 127 | Item No 124 : One light/fan/bell point controlled by two way switches, with cables 1.5 sqmm size. |
| 128 | Item No 125 : One socket outlet 5/3 pin 5 AMPS controlled by one switch on the same board. |
| 129 | Item No 126 : One socket outlet 5/3 pin 5 AMPS controlled by one switch on independent board. |
| 130 | Item No 127 : One socket outlet 15 Amps independent with two single core 2.5 sqmm drawn through in and including PVC concealed conduit pipe 20mm dia medium grade ISI Marked complete with one run of PVC insulated copper conductor cable 2.5 Sq mm single core green colour earth wire and connecting to earth dolly incl colour coding of cable shall be for phase, neutral and earth wire as specified and directed. |
| 131 | Item No 128 : M&L modular white cover plate with frame 2 module. |
| 132 | Item No 129 : M&L modular white cover plate with frame 3 module. |
| 133 | Item No 130 : M&L modular white cover plate with frame 4 module. |
| 134 | Item No 131 : M&L modular white cover plate with frame 8 module. |
| 135 | Item No 132 : M&L modular metal flush box for 2 module. |
| 136 | Item No 133 : M&L modular metal flush box for 3 module. |
| 137 | Item No 134 : M&L modular metal flush box for 4 module. |
| 138 | Item No 135 : M&L modular metal flush box for 8 module. |
| 139 | Item No 136 : S&F Modular switch piano type 6/10 Amps two way single pole 240 volts A.C complete all as specified and directed. |
| 140 | Item No 137 : S&F Modular switch piano type 6/10 Amps One way single pole 240 volts A.C complete all as specified and directed. |
| 141 | Item No 138 : S&F Modular switch piano type 16/20 Amps complete all as specified and directed. |
| 142 | Item No 139 : S&F Modular socket outlet 5/10 Amps 5 pin 240 Volts multi socket for cell phone pin or 2 pin+ 3 pin complete all as specified and directed. |
| 143 | Item No 140 : S&F modular socket outlet 16/20 Amps 6 pin 240 Volts twin socket heavy duty complete all as specified and directed. |
| 144 | Item No 141 : S&F modular bell push large piano type single pole one way 240 volts A. C complete all as specified and directed. |
| 145 | Item No 142 : S&F bell ding dong/ bell musical single phase 230 volts all as per specified. |
| 146 | Item No 143 : S&F modular type single phase motor stator 240 volt grade up to 25 Amps. |
| 147 | Item No 144 : S&F Modular ceiling fan regulator suitable electronic rotary step type 100 Watt 2 module complete all as specified and directed. |
| 148 | Item No 145 : S&F ceiling rose, 3 phase/PVC /polycarbonate, isolated body complete all as specified and directed. |
| 149 | Item No 146 : S&F LED tube light fitting 1x20 watt LED (4 ft), T-8 LED fitting incl LED Tube 20 watt in warm white, 230 volts energy saving, environmental friendly, long life, impact proof, surface mounting batten suitable for use single LED tube made out from CRCA sheet steel coated for improper resistance against corrosion with PC Housing in opal finish suitable for wet location with brightness LEDs with all accessories internally prewired and incl connected with twin core twisted flexible wire copper conductor cable with suitable size complete all as specified and directed. |
| 150 | Item No 147 : S&F LED Panel 36 watt LED (2X2 ft), LED Recessed mounted aluminium frame fitting including LED panel in white, 230 volt energy saving environmental friendly, long life, corrosion resistant, impact proof, surface mounting IP-65 luminaire with PC Housing in opal finish suitable for wet location with brightness LED edge lit luminaire suitable for armstrong/grid ceiling complete with all accessories internally prewired and including connected with twin core twisted flexible wire copper conductor cable with suitable size complete all as specified and directed. |
| 151 | Item No 148 : S&F sheet metal enclosure for MCB DB single pole and neutral 8 way with 200 Amps rated bus bar 240 volts double door type complete all as specified and directed. |
| 152 | Item No 149 : M&L Sheet metal enclosure MCCB DBs, Triple pole & neutral 4 way with 200 Amp rated bus bar double door suitable for 01 No incoming MCCB of 125Amp capacity and 12 Nos+ 12 Nos Out going MCB SP complete all as specified and directed. (NOTE:- MCCB & MCB's are measured and paid in separate items and same make). |
| 153 | Item No 150 : S&F MCB SP upto 40 Amps 240 volts complete all as specified and directed. |
| 154 | Item No 151 : S&F MCB SPN capacity 40 to 60 Amps DP 240 complete all as specified and directed. |
| 155 | Item No 152 : S&F MCCB 4 pole, 125 Amps with breaking capacity 16 KA, 415 volts complete all as specified and directed. |
| 156 | Item No 153 : M&L sub main wiring with two single core pvc insulated unsheathed FR copper conductor 1100 volt grade multistrand of size 6 sqmm and incl drawn through and including non metallic rigid pvc conduit and conduit accessories of 25 mm external dia and conduit accessories of ISI marks medium grade including 4.0 sqmm copper wire for earth continuity wire and connected of common earth dolly. Make of Wire: (Note: One run of conduit two run of 6 sq mm copper conductor & one run of 4 sq mm copper conductor is measured as one unit). |
| 157 | Item No 154 : M&L in replacement of sub main wiring with two single core pvc insulated unsheathed FRLSH copper conductor 1100 volt grade multistrand of size 4 sqmm and incl drawn through and including non metallic rigid pvc conduit and conduit accessories of 25 mm external dia and conduit accessories of ISI marks medium grade including 4 sqmm copper wire for earth continuity wire and connected of common earth dolly. (Note:-One run of conduit two run of 4 sq mm copper conductor & one run of 4 sq mm copper conductor is measured as one unit). |
| 158 | Item No 155 : M&L for Earthing complete with galvanized iron earth plate electrode 600 x600x6mm thick buried directly in ground (earth pit not less than 2.25 meters deep below normal ground level) with top edge of plate not less than 1.6 meter below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts check nuts galvanized iron or steel all as shown in Electrical plate No. 3 of MES sch pt I testing on completion with & ind 15 mm bore light grade GI protection pipe 7.5 mtr long for earth lead, PCC (1:3:6) pit with pre cast RCC (1:2:4) cover watering arrangement with funnel, wire mesh 20 mm bore light grade GI pipe, common salt & char coal fixing necessary. (GI pipe & GI wire beyond 7.5 mtr will be measured and paid respectively). |
| 159 | Item No 156 : M&L in replacement of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 120sqmm 3.5 core. |
| 160 | Item No 157: M & L for earthing complete with copper earth plate electric 60 cm x 60 cm x 3.15mm buried directly and vertically in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to Copper strip 20 x 3 mm as earth lead by means of bolts, nuts, check nuts and washers of galvanised steel and including necessary earth work execution in any type of latent rock, PCC 1:3:6 type C2 chamber and chamber cover 50mm (PCC 1:2:4) with 8 mm dia CTD reinforcement watering pipe 20mm dia GI protection pipe for copper strip 40mm dia GI light grade salt, coal, magnesium sulphate and water funnel etc complete all as per electrical plate No 4 of SSR Part I complete all as spd and directed |
| 161 | Item No 158: SM&L in replacement of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 50sqmm 3.5 core complete all as specified and as directed. |
| 162 | Item No 159: Supply and fixing in ceiling fans complete with blades, down rods, electronic regulator and accessories 230v, 1200 mm sweep, Min air delivery 210CFM wtih service value 6.00 BEE, Five star rated with brushless direct current motor (BLDC). (Note: Taking down old fan will be deposited on MES Store yard) |
| 163 | Item No 160: Excavation in trenches n exc 1.5 m wide & n exc 1.5 mtr deep in soft/loose soil for taking out pipe & laying of pipe & getting out for diverting of Cl pipe line complete all as directed. |
| 164 | Item No 161: Returning, filling in, including spreading, leveling, watering & well ramming in layers n. exc 25 cm thick complete all as directed. |
| 165 | Item No 162: Removal of excavated soil to a distance not exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as directed. |
| 166 | Item No 163: M&L for bricks common burnt sub class B designation for protection of cable complete all as specified and directed. |
| 167 | Item No 164: S&F Water heater storage type electric supply and installed complete capacity 25 Ltrs with grouting bolts nuts washers complete necessary fittings accessories all as specified and directed. |
| 168 | Item No 165: M&L for natural local river sand for cable protection. |
| 169 | Item No 166: M &L for GI tubing 50mmmm dia light grade with all fittings laid in trench/making GI bracket of security lights/provn for ceiling fan point including bending of suitable size/support of UG cable as required at site as directed |
| 170 | Item No 167: Supply and installing testing and commissioning of outdoor type panel size 100 m (height)x1 00 m (breath)xG 30m(depth) factory made polycarbonate (shock proof rust free carros on free dust proof acid and chemical resistant fireretardant naving high impact made of nalogen and silica free recyclable material UV resistant having high grade gasket made of polyurethane should withstand glow wire test at 650C should be flame retardant the feeder pillar panel should be as per ERDA Certification with switchgear assemblies as per EC 60 439-1 following tests performed and passed and satisfactory with Compartmentlized each MCCB & Bus barn sperate enclosure |
| 171 | (1) Temperature Rise(2) Dielectric properties (3) short circuit withstand current Rate peak & shor me withstand current and Rated conditional short circuit current (4) Effectiveness of protective circuits (5) Clearance & creep age distance (6)Mechanical operation, mounted on angle iron frame of size 50mm x 50mm x 6mm thick Complete with necessary foundation work as directed at siteBUS BAR CHAMBER(a) 400 Amp TPN. Aluminium conductor Supported on insulated plate form interconnection ofali incornings & outgoings |
| 172 | INSTRUMENT CHAMBER (1) Voit Meter 96mm flush type rated 0-500V Digital tyce with Volt Meter selector switch-01 Set(1) Amp Meter 96mm flush type rated 0-800A, Digital type with suitable size C T's and Amp Selector switch-01 Set(iii) RYB Phase indicating light LED type with HRC Fuses-01 SetINCOMING (i) MCCB 4 pcle. 400 Amp Fixed type of ultimate breaking capacity icu- 50 KA at 415 volts - 1 NoOUTGOING (i) MCCB 200 A, 4Pole, 415V, 35 KA thermal magnetic release-2 Nos.(i) MCCB 100 A, 4Poie, 415V 35 KA thermal magnetic release-3 NosNOTE All the MCCB with Rotary Mechanism Handle and spreader links Panel wiring for control circuit with copper flexible 15 Sq mm & power wiring minimum 4 Sqmm flexible\\" |
| 173 | SCHEDULE \\"A\\" (Schedule of credit)Schedule of Credite Rs 892721.00 (Minus) inserted by the MES.(Note : Credit amount shall be deducted manually to arrive net bid amount) SCHEDULE OF CREDIT Srl No. Item Description Unit Quantity Rate Amount |
| 174 | Old u/s tiles/kotastone any type any thickness |
| 175 | Old u/s Brick bats of any gauge |
| 176 | Old u/s Chowkhats or frame with shutters (without taking off shutters from the frames) n.exc 1.50 Sqm each with iron mongeries. |
| 177 | - DITTO - but exc 1.50 Sqm & n.exc 4 Sqm |
| 178 | Old u/s Taking down of shutter of any description exc 1 sqm & n.exc 2 sqm each. |
| 179 | Scrap Iron |
| 180 | Old u/s GI tubing 15mm dia |
| 181 | Old u/s GI tubing 20mm dia |
| 182 | Old u/s PVC pipe/Rainwater pipe of any description |
| 183 | Old u/s PVC water tank 500 ltr capacity |
| 184 | Old u/s PVC water tank 1000 ltr capacity |
| 185 | Old u/s Scantling over 40sqm cross sectional area and above |
| 186 | Old u/s CGI Sheet of any thickness |
| 187 | Old u/s Asbestos Sheet of any thickness |
| 188 | Old u/s ceiling boards of any type and size |
| 189 | Old u/s 15 mm bore cp bib taps/stop cock/pillar tap/Angle cock /concealed stop cock |
| 190 | Old u/s shower rose Brass/CP |
| 191 | Old u/s WHB/WC/Urinals of any description |
| 192 | Old u/s PVC low level flushing cistern 10 Ltr capacity |
| 193 | Old u/s Health faucet any size any description |
| 194 | Old u/s pvc connection pipe any dia |
| 195 | Old u/s looking mirror any size any description |
| 196 | Old u/s Tubular Towel Rail any size any description |
| 197 | Old u/s seat cover/waste pipe/grating/soap dish/paper Holder of any description |
| 198 | Old u/s Kitchen Sink/Plate Rack of any description |
| 199 | Old u/s curtain rod fancy type with brackets |
| 200 | Old u/s PVC fitting |
| 201 | Old u/s pvc nahani trap/floor trap/floor trap of any size |
| 202 | Old u/s wire mess |
| 203 | Old u/s gate valve 20 mm |
| 204 | Old u/s wall mixer 15 mm |
| 205 | Old u/s pvc float valve 15/20 mm |
| 206 | Old U/S copper/aluminium point wiring (light/fan/socket/power) complete of any size type and including old switches/ sockets and fittings |
| 207 | Old U/S sub main wiring of any type and description |
| 208 | Old U/S DB of any size |
| 209 | Old U/S MCB/MCCB of any size |
| 210 | Old U/S XLPE/PVC Cable of any size |
| 211 | Old U/S Tube lights Total Amount 892721.0 NOTES:-1. The quantities shown in column (4) are approximate and are inserted as guide only. The actual quantities obtained from ismantling/demolition/takingdown under schedule shall be considered for credit.2. The rate given under Column (5) is firm and no variation in the rate will be allowed. The credit worthiness of the materials for which the credit is to beoffered by the contractor shall be deemed to have been ascertained by him before quoting his tender No claim onthis account shall be entertained. 3. Credit amount as indicated below shall be recovered from the contractor's dues inrelevant RAR's but in any case before removal of the demolished materials from work site. 4. The demolished materials shall be removed from site from time to time as directed by GE. However, the contractor shall be permitted to remove the demolished materials becoming his property only after the amount is deposited by the contractor. 5. No separate payment for removal of the old material including disposal of debrisshall bemade & the same shall bedeemed accounted for in the credit. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 08, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 15, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Today
Oct 19, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 4 days
Oct 19, 2026
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 4 days
Oct 19, 2026
18:00 IST
Corrigendum-4 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 4 days
Oct 15, 2026
18:00 IST
Corrigendum-5 Issued
Clarifications on tender conditions and amendments issued.
Today
Oct 15, 2026
18:00 IST
Corrigendum-6 Issued
Clarifications on tender conditions and amendments issued.
Today
Oct 08, 2026
18:00 IST
Corrigendum-7 Issued
Clarifications on tender conditions and amendments issued.
CompletedOct 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysOct 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender