Tender For Addition/ Alteration To Bathrooms And Certain Misc Works At Sm-49 And Provision Of Overhead Shed In Bldg No Sm-253 Under Ge (Mcte) Mhow
Tender Value
6.31 Lakhs
Estimated cost
Bid Submission
07 Oct 2026
3 days left
EMD
12620
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Indore → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition/ Alteration To Bathrooms And Certain Misc Works At Sm-49 And Provision Of Overhead Shed In Bldg No Sm-253 Under Ge (Mcte) Mhow
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 30-Sep-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 07-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of Pain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof coverings etc. complete all as specified and directed. |
| 2 | Dismantling of timber scantling as fillets, rails, posts, rafters, purlins, any section & any description complete all as specified and directed. |
| 3 | Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed. |
| 4 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing debrish and rubbish off the premises and stacking serviceable tiles complete all as specified and directed. |
| 5 | Taking down old GI tubing ISI marked medium grade 15mm bore with all fittings including connection etc, complete all as specified and directed. |
| 6 | Taking down Shutters of any description exc 1 sqm but n. exc 2 sqm each of any description complete all as specified and directed. |
| 7 | Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 Sqm and not exc 4 Sqm each complete all as specified and directed. |
| 8 | Demolition of store slabs and tiles of any discription or thickness in floors/ walls laid bedded and pointed in any mortar complete all as specified and directed. |
| 9 | Demolition of un reinforced cement concrete in ground floors and pavings n.exc. 15 cm thickness below or above ground level complete all as specified and directed. |
| 10 | M&L Pre- painted galvalume aluminum zinc coating GI based profile steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa, hot dip alloy of 55% Aluminium 43.5% Zinc 1.5% Silicon and finished with resin coat on both surfaces @ 150gm/ sqm of coating (total both surfaces) as in roof covering/ cladding to wall, including flashings, ridges valley etc fixed with self tapping screws complete all as specified and directed. |
| 11 | S&F Steel work in tubular trusses, purlins etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161- 1979 grade St.-240 etc. complete all as specified and directed. |
| 12 | M&L for rendering 15mm thick on fair faces of concrete/ brick interior surfaces in CM 1:6 finished fair and even and (without using extra cement complete all as specified and directed. |
| 13 | M&L for rendering 15mm thick on fair faces of brick work or concrete exterior surfaces in CM 1:4 and finished even and smooth without using extra cement including mixing of water proofing compound wherever required complete all as specified and directed. |
| 14 | M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6, complete all as specified and directed. |
| 15 | M&L for glazed coloured ceramic tiles, first quality (or approved class, colour and design/ shade) of 300 x 450 x 7 to 8mm thick in vertical surfaces, as in dado/ skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over and including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed. |
| 16 | Supplying and laying of 20mm outer dia CPVC pipes SDR 13.50 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified and directed. |
| 17 | Supply and laying of CPVC brass elbow 20mm dia SDR-11 on wall/ ceiling or laying in floor complete all as specified and directed. |
| 18 | Supply and laying of CPVC brass Tee 20mm dia SDR-11 on wall/ ceiling or laying in floor complete all as specified and directed |
| 19 | S&F 35mm thick Flush shutters solid core construction with block board core & plywood face panels, commercial type on both sides complete all as specified and directed. |
| 20 | S&F Factory made, 2nd class hard wood, 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass/ gauge etc. (without sash bars) edges or framing plain, chamfered or rounded fitted with cut or mitered beads for securing glass etc. size of members of shutters as specified in SSR Part-I section 8.24 (a), complete all as specified and directed. |
| 21 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid DECORATIVE TYPE FLUSH DOOR SHUTTER of size 50 x 100mm thick comprising of virgin PVC polymer of K value 58-60 (Suspnsion Grade), calcium carbonate and natural fibres (wood powder/ ricehusk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screws with full body threaded star headed SS screws having minimum frame density of 650 kg/cum, screw withdrawal strenght of 1800 N (Face) & 900 N (Edge), minimum compressive strenght of 50 N/mm sqr, modules o+F63f elasticity 850 N/mm sqr and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ mositure prooof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws complete all as specified and directed. (Note:- stainless steel butt hinges and necessary scews shall be paid seperately. |
| 22 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid DECORATIVE TYPE FLUSH DOOR SHUTTER of size 30mm thick comprising of virgin PVC polymer of K value 58-60 (Suspnsion Grade), calcium carbonate and natural fibres (wood powder/ ricehusk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screws with full body threaded star headed SS screws having minimum frame density of 650 kg/cum, screw withdrawal strenght of 1800 N (Face) & 900 N (Edge), minimum compressive strenght of 50 N/mm sqr, modules o+F63f elasticity 850 N/mm sqr and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ mositure prooof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws complete all as specified and directed. (Note:- stainless steel butt hinges and necessary scews shall be paid seperately. |
| 23 | M&L for Prepration and cleaning of top surfaces of tiles/ chequered tiles/ paver blocks surface apply one coats of terracotta exterior emulsion complete all as specified and directed. |
| 24 | M&L for PCC 75mm thick 1:2:4, type B-2 with using 40mm graded stone aggregate plinth protection joints should be filled with bitumen primer etc. complete all as specified and directed. |
| 25 | S & F in repair Vitreous China wash down water closet pan pedestal pattern, single piece, white/ coloured, including vitreous china flushing cistern, plastic water closet seat cover, closed pattern with flat bottom, connection to drain (or outgoging pipe) and flushing pipe, antisiphonage pipe etc. complete all as specified and directed. |
| 26 | S&F Vitreous China wash basin counter sunk type Oval/ rectangular shape size 610 x 460mm complete all as specified and directed. |
| 27 | S&F 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 28 | S&F in repair chromium plated brass wall mixer 3-in-1 fancy type with provison for both hand shower and overhead shower complete with wall flange without hand & over head Shower screwd down for 15mm GI bore pipe complete all as specifed and directed. |
| 29 | S&F in repair chromium plated brass Central hole basin mixer without popup waste system complete screwd down for 15mm GI bore pipe complete all as specifed and directed. |
| 30 | S&F Brass CP Tubular towel rail, 20mm dia, D type, 60cm long between flanges fixed complete all as specified and directed. |
| 31 | S&F in repairs Health Faucet ABS with Rubbit Cleaning System, 1.25 m Long PVC Flexible Tube & ABS Wall Hook complete all as specified and directed. |
| 32 | S&F in repair 100mm dia cast iron nahani trap with CP grating including jointing to wast pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 33 | S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 34 | S&F Long body CP Bib taps, cast copper alloy with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 35 | S&F chromium plated shower roses 125mm sizes with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed. |
| 36 | S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard & railing 60cm long complete all as specified and directed. |
| 37 | S&F in repairs Stop/ angle cock 15 mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions complete all as specified and directed. |
| 38 | S&F in reparis Stainless Steel Wall Mount Case with Soap Holder & Bruch Holder fixed to wall complete all as specified and directed. |
| 39 | S&F in repair flexible waste pipe for wash hand basin, fitted to wash hand basin including all necessary brackets etc. complete all as specified and directed. |
| 40 | S&F in repair 8mm Corner Glass Shelf of size 320 x 320mm with silver chromium finished border Over Range premium quality complete all as specified and ditrected. |
| 41 | M&L for stainless steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or stainless steel wire staples complete all as specified and directed. |
| 42 | S&F aluminium anodised barrel tower bolts of extruded section with 150mm long bolt, complete all as specified and directed. |
| 43 | S&F 300mm length, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed |
| 44 | S&F 100mm size of Butt hinges, medium weight cold rolled mild steel complete door etc complete all as specified and directed. |
| 45 | S&F Extruded aluminium alloy handles fabricated type anodised 150mm size complete all as specified and directed |
| 46 | M&L for Granite (of any type) stone slab 20mm thick (table rubbed and polished) as in partition on walls for urinals etc. fixedin walls by making grooves (min depth 50mm) on wall and fix slabs and in CM 1:3 or by using adhesive and match the joints with pigment to match the shade of granite stone including grinding the edges half round and polishing including etc. complete all as specified and directed. |
| 47 | M&L for coloured Rubber Moulded Chequred Cement Concrete tiles 300 x 300 x 30mm thick set and jointed and pointed in neat cement slurry in floors with grey cement and pigment over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 48 | Excavation in trenches not exc. 1.5m wide and not exc 1.5m in depth for foundation etc. for shafts, wells cesspits, manholes, piers holes etc. not exceeding 1.5 mtr in depth and getting out in loose/ soft soil etc. complete all as specified and directed. |
| 49 | Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed. |
| 50 | M&L for hardcore of broken stone or bounders gauge n exc. 63mm, deposited, spread & levelled in layers n exc. 15 cm thick, watered & rammed to a floor/ true surface, complete all as specified and directed. |
| 51 | M&L for cement concrete type D-2 1:4:8 using 40mm graded stone aggregate) in flooring complete all as specified and directed. |
| 52 | M&L for 300mm x 300mm x 10mm thick high traffic paver tiles coloured joint free as in floors and jointed in neat cement slurry and pointed in white or coloured cement to match the surface laid over and including 20mm thick screed bed in CM 1:6, complete all as specified and directed. |
| 53 | M&L for PCC 75mm thick 1:3:6, type C-2 with using 40mm graded stone aggregate as in sub base floor complete all as specified and directed. |
| 54 | M&L for Brick work with Fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in half brick wall bulit in cement mortar 1:6 complete all as specified and directed. |
| 55 | M&L for providing cement concrete type B-1, 1:2:4 (using 20mm graded aggrgates as in coping, complete all as specified and directed. |
| 56 | S&F for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 57 | S&F Steel work in tubular trusses, purlins etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161- 1979 grade St.-240 etc. complete all as specified and directed. |
| 58 | M&L for preparation of new steel or iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, comlete, complete all as specified and directed. |
| 59 | M & L for Point wiring for One light/ fan/ bell controlled by one, one way switch 5/6 Amps with 1.5 Sqmm (nominal cross sectional area), single core, PVC insulated with multistranded PVC unsheathed FRLSH copper conductor cable in and including rigid non- metallic PVC concealed conduit of suitable size medium grade ISI marked complete, including one continuity earth wire of PVC insulated, unsheathed 1.5 Sqmm (nominal cross sectional area) FRLSH copper conductor connected to all fittings, common earth and connected to earth dolly including modular flush box with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches and blank plates of suitable size all fittings and accessories and making good disturbed surface of walls and floors etc., complete all as specified and directed. |
| 60 | All as per Srl item No. 59.00 above but One 3 pin, 5/6 Amps socket outlet point on independent board controlled by one, one way 5/6 Amps switch |
| 61 | M & L for Point wiring with 2.5 Sqmm (nominal cross sectional area), single core, PVC insulated with multistranded PVC unsheathed FRLSH copper conductor cable in and including rigid non- metallic PVC concealed conduit of suitable size medium grade ISI marked complete including one continuity earth wire of PVC insulated, unsheathed 2.5 Sqmm (nominal cross sectional area) FRLSH copper conductor connected to all fittings, common earth and connected to earth dolly for one three pin 15/16 Amps socket out-let point on an independent board including modular flush box with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches and blank plates of suitable size and making good disturbed surface of walls and floors etc. complete all as specified and directedNote:- Make of GI flush box should be same with switch/ socket |
| 62 | S&F switch modular type 16 A, 1 module, complete all as specified and directed. |
| 63 | S&F socket modular type multipurposes 6/16 A, 2 module, complete all as specified and directed. |
| 64 | S&F modular switch 1 way 6 A, 1 module, complete all as specified and directed. |
| 65 | S&F modular socket 6 Amps 2/3 pin combined 2 module, complete all as specified and directed. |
| 66 | S&F 70 watt LED flood light made up of pressure die cast aluminium housing with toughened glass and high power LEDs and secondary lenses with IP 66 protection system efficacy 110/120 lm/watt, 10KV SPD included complete all as specified and directed. |
| 67 | S&F 10 watt bollard garden light fittings integral pole mounted decorative LED post top with IP 66 protection with robust design and efficient light distribution and taking out old defective fittings and all necessary fixing arrangements complete all as specified and directed. |
| 68 | S&F 4 Sqmm cable 3 core copper conductor PVC round, sheathed (flexible) industrial cable complete all as specified and directed. |
| 69 | S&F for PVC non-metallic rigid conduit ISI marked heavy duty white/ ivory colour and its accessories heavy duty ISI marked of size 25mm dia for telephone and TV connections including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed. |
| 70 | IP 65 Thermoplastic BIS-certified junction box size 125 x 167 x 82mm with cable knockouts. Lid fasteners shall have captive type stainless steel screws with star type head and lid will be sealable with accessories. The junction box shall have elongated holes inside them for wall mounting/ structure mounting provision Halogen & Silicone free material junction box should be BIS-certified must comply with IS 14772:2020 for safety, ensuring they are suitable for electrical installantions. The junction box shall fulfill the following satandards, IEC 60670-22 : Particular requirements for connecting boxes and enclosures. IEC 61439-2-11 : Flame - retardant & Self -extinguishing. Glow Wire tested at minimum 750 deg C. UL Subject 94-V2, IEC 60529 : IP 65 degree of protection, Colour Grey (RAL 7035) Pole Mounting Clamp, IP 68 Polymide Cable Glands Accessories etc. |
| 71 | M&L for PCC work 1:2:4 type B-2 using 40mm graded stone aggregate in foundation and mass concrete complete all as specified and directed. |
| 72 | Supply and fixing Inverter LED batten 4 feet 20 watt with squre profile and polycarbonate channel. Lithium lon battery with charging time 8 hourse -10 hourse and back up time upto 3 hours. with extruded environmental friendly, energy efficient with three core flexible copper conductor cable of suitable size from ceiling rose complete with all connected accessories complete all as specified and directed. |
| 73 | S&F of MCB DB SPN 4 way dounle door with 200 Amp rated bus bar, 230 volts 50 Hz including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc including taking down old unsv DB and making good of disturbed surface to match with existing colour of wall complete all as specified and directed. |
| 74 | S&F in replacement 40 to 63 Amp rating 240V 10KA 'C' curve, mainiature circuit breaker (MCB) and current carrying capacity in the MCB DB complete with connection testing and commissioning by using lugs complete all as specified and directed. |
| 75 | S&F in replacement 240V 10KA 'B' curve, mainiature circuit breaker (MCB) of single poles current carrying capacity 5 to 32 Amp in the MCB DB complete with connection testing and commissioning by using lugs complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 30, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 07, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 3 daysOct 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysOct 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender