Tender For Toilet Compex At Dhalli Mohalla W.No. 5 Pyt Dullangal Block Duggan, Pyt.- Dullangal Block- Duggan , Kathuaunder District Capex Budget ( Pri )Fy 2026-27 Tender Amount 3.00Lac
Tender Value
3 Lakhs
Estimated cost
Bid Submission
16 Sep 2026
0 days left
EMD
6000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kathua → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Toilet Compex At Dhalli Mohalla W.No. 5 Pyt Dullangal Block Duggan, Pyt.- Dullangal Block- Duggan , Kathuaunder District Capex Budget ( Pri )Fy 2026-27 Tender Amount 3.00Lac
BOQ
| Sl. No. | Item Description |
| 1 | Percentage BoQ BoQ_Ver3.0 Percentage Normal INR Only INR Select, At Par, Excess (+), Less (-) IOCL Tender Inviting Authority: EXECUTIVE ENGINEER REW DIVISION KATHUA Name of Work;- Toilet Compex at Dhalli Mohalla W.No. 5 Pyt Dullangal Block Duggan, Pyt.- Dullangal Block- DUGGAN , KATHUAunder District Capex Budget ( PRI )FY 2026-27 Tender Amount 3.00Lac Contract NO:- District Capex Budget PRI 2026-27 Name of the Bidder/ Bidding Firm / Company : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # S. No. Item Description Item Code / Make Quantity Units Estimated Rate inRs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT inRs. P TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) with 20% plum |
| 5 | Centering and shuttering et and removal of formwork for:- Foundations |
| 6 | Suspended floors |
| 7 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in 1:6 mix |
| 8 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 9 | 12mm Plaster in 1:6 mix |
| 10 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 11 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth levelMild steel and medium tensile steel bars |
| 12 | white washing to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 13 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown |
| 14 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 15 | Providing and fixing 1mm thick MS sheet door with frame of 40mm 40mm 6mm angle iron and 3mm guset plates at junctions and corners , all necessary fittings complete , including applying a priming coat of approaved steel primer. |
| 16 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required |
| 17 | Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT Pillar cock. |
| 18 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 19 | Providing and fixing brass bib cock of approved quality. 15 mm nominal bore |
| 20 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 21 | P/f of following material , PVC Pipes 75mm |
| 22 | 110mm |
| 23 | D-bend |
| 24 | Soap Dish |
| 25 | Brass Ball Value 25mm |
| 26 | Cp Grating |
| 27 | Connection Pipe |
| 28 | Tank Nipple 25mm |
| 29 | Elbow 25mm |
| 30 | Tee 25mm |
| 31 | Union 25mm |
| 32 | Towel Rod |
| 33 | Providing and fixing G.I /CPVC pipe to IS ( Medium Class) with fitting upto 150mm diad & above shall be MS 7mm thick confirming to IS : 3989 including Synthetic enamel paints of approved quality and shade over a coat of approved priming coat ( Shade as per colour code ) and clamps and flange including cutting & making good walls complete.(internal and Exposed on walls)& includes testing of joints15mm medium |
| 34 | 20mm Medium |
| 35 | Dry RRM With hard stones in foundation & plinth. |
| 36 | Carriage of sand 85KM MT, 1.5km AT |
| 37 | Carriage of aggregates 85KM MT, 1.5km AT |
| 38 | Carriage of Bricks 165KM, 1500m AT |
| 39 | Carriage of stones 0.5km AT |
| 40 | CIB & Photos , etc Total in Figures Excess(+) 1.0 Full Conversion INR 300206.45 300206.45 INR Three Lakh Two Hundred & Six and Paise Forty Five Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 INR Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodaySep 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender