Tender For Supply, Installation And Commissioning Of Submersible Pumping Machinery Along With Allied Accessories At P.H. No.- I Of Kalikamerya Water Supply Scheme Under South 24 Pgs. Mechanical Division, Phe Dte. [Block: Diamond Harbour- Ii](Sm/12577
Tender Value
Ref. Documents
Estimated cost
Bid Submission
03 Oct 2026
17 days left
EMD
10500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply, Installation And Commissioning Of Submersible Pumping Machinery Along With Allied Accessories At P.H. No.- I Of Kalikamerya Water Supply Scheme Under South 24 Pgs. Mechanical Division, Phe Dte. [Block: Diamond Harbour- Ii](Sm/12577)
BOQ
| Sl. No. | Item Description |
| 1 | Supply and delivery at site of the following submersible pumping machinery and electrical accessories: |
| 2 | Submersible pumping machinery directly coupled with water proof suitable size motor having following specification and as per NIT specification:PumpShaft-stainless steelImpeller- S.S/ GMOutlet Size: 38/50/65 mm.Motorsubmersible type 1 Ph , 50Hz, 220 Volt ± 10% 2900 RPMMotor must be suitable for operation with CSCR/DOL starting method. Test certificate along with characteristic curve should be submitted at the time of delivery. |
| 3 | TW-I, Discharge- 133 LPM, Head- 56 Mtr |
| 4 | 1.1 KV grade 2.5 sq.mm x 3 Core water proof flat submersible cable for above motor. |
| 5 | 1.1 kv GRADE 10 sq.mm 2 core XLPE insulated Al. Ar. armoured cable conforming to IS 7098 (Part-I) 1988, with upto date amendments. |
| 6 | Supply, delivery and storage at site of Wall mounted epoxy painted sheet steel enclosed front open 1-Phase SPS With 2P Contactor & Overload Relay (Ammeter + Voltmeter) with 160-220V AC Coil for 3 HP pump motor set, Overload Relay Range (A)- 17 to 24, Contactor Rating- 25 A. |
| 7 | Supply and delivery of the following valves, pipes and gauges etc at site: |
| 8 | 3 mtr long 50 mm dia UPVC standard type column pipe [cream color] with both side threaded and one end side socketed with registered KPMG. |
| 9 | 1.5 mtr long 50 mm dia UPVC standard type column pipe [cream color] with both side threaded and one end side socketed with registered KPMG. |
| 10 | 50 mm dia CI top & bottom adopter. |
| 11 | 50 mm dia CIDF sluice valve-1 nos., Non Return Valve-1 no., CIDF 90° bend-1no., CI flanged tee-1no. blank flange-1no., CI/ MS flanged short piece 0.50 mtr.-1no, CI/ MS flanged pipe 1 mtr. 1 no. etc as per IS specification and certification for construction of delivery pipe line and wash out line. |
| 12 | Heavy type 150 mm dia split type tube well cover with 12 mm thick clamping arrangement including holes of column pipe, air pipe and cable entry with 2 sets heavy type suspension clump, nuts, bolts and washer as per departmental design. |
| 13 | Depth gauge 100 mm dia with steel air pipe of required length with all accessories for the above work including supply of good quality hand pump[This cost includes 15 mm. dia G.I. pipes and specials]. |
| 14 | Pressure gauge 150 mm dia [0-7Kg/Sq.cm] brass cock and fitting complete[This cost includes 15 mm. dia G.I. pipes and specials]. |
| 15 | 50 mm. dia. non metalic pipes (IS:14930) and specials for protection of submersible cable. |
| 16 | Anti snapping safety device for pump set by supplying suitable size MS clamps two sets and nylon rope of required length including supplying of nuts, bolts and all other materials. |
| 17 | 32 Amps rewirable type male female kit Kat fuse unit |
| 18 | Laying of 10 sq. mm. 2 core AL. ar. Cable in wall/ floor by supplying of all necessary materials as per IE Rules and as per direction. |
| 19 | Installation of above pump motor, panel, valves and specials as in sl. NO. 1, 2 & 3 including supply of cable gland, sockets etc including brick, sand, cement rod stc as required to complete the job as per direction and up to the entire satisfaction of the EIC. |
| 20 | Making brick pillar 0.25 mtr x0.25 mtr. for supporting of valves and pipes with 12 mm thick plaster and net cement finish complete. |
| 21 | Making suitable size pump foundation with supplying of necessary cement, sand and stone chips including plastering and net cement finish complete. |
| 22 | Making double earthing arrangement in compliance with IE rules by G.I. pipe electrode of 50 mm. dia 3 mtr. Long 2 Nos for panel and pumping machinery 25 mm. x 6 mm. G.I. earth strips from earth pit to panel and all other accessories required to complete the work. |
| 23 | Making internal electrification of pump house consisting of two bracket point, one tube light point, two bulk head point, one fan point and 1 NO. 74 watt LED fixture with arm bracket at outside and one three pin plug point including supply of all necessary materials to complete the work as per IE rules and as per direction [All the fittings and lamp should be LED type as per choice of EIC]. |
| 24 | Supply, delivery and storage of the following materials at site as per sample for voltage stabilizer |
| 25 | 8KVA Single Phase oil cooled type Servo Motor operated copper wound line voltage corrector conforming to IS-9815 (pt.-1)-1994 suitable for unbalanced input voltage comprising with following specifications:1. Input Voltage: 115-289V2. Output Voltage:- 240V ± 1%, Single Phase, 50 Hz3. Duty Cycle: Continuous 4. Efficiency: >95%5. Overload Capacity: 25% for 30 minutes6. Load Power Factor: Unaffected7. Waveform distortion: Nil8. Response time: 20 milli seconds.9. Phase shift: Negligible10. Internal Impedance: Negligible11. Frequency variation: 47-63 Hz12. Winding Material: Copper ETP grade 99.9%13. Magnetic Material: CRGO M4 grade14. Brush: High Quality Carbon15. Ambient Temperature: 5-55°C16. Operation: Auto/Manual17. Output Current: 33.33A18. Protection: Under Voltage, Over Voltage, Over Lond19. Auto Operation: Motor Minimum 10Kg-cm pressure20. Cabinet: Minimum 2 mm thick M.S. Sheet21. Accessories: VAF Meter, Cable incoming & outgoing, terminal, Wheel22. Cooling Oil: Mineral oil (Make-Transol/Indian oil) |
| 26 | 32 amps 2 pole 240 Volt main switch including sheet steel enclosure. |
| 27 | 32 amps 2 pole 240 Volt change over switch in sheet steel enclosure. |
| 28 | 10 sq. mm. 2 core 1.1 KV grade XLPE insulated Al. Ar. Cable as per IS:7098 (Part-II) 1988 with latest amendments. |
| 29 | Installation with testing and commissioning [operation for 3 days with load] of the above voltage stabilizer with necessary foundation along with the necessary accessories [Sl. No.10] in the suitable position at the pump house and drawing cable with MS saddle, making all electrical connection with necessary socketing by crimping method and complete the work as per direction of the EIC |
| 30 | Supply, delivery and storage at site of automatically controlled diaphragm type chlorinator dosing pump with flow rate 100 LPH and maximum pressure of 10 Kg/ CM² with all accessories for pump & motor, foundation bolt, suction and discharge Flange and with storage tank of dosing solution of 100 Ltr. Capacity and the prime mover to be coupled with pump of 0.5 H.P. 1 Phase, 1450 RPM squirrel cage TEFC induction motor, Motor will be IE2/ IE3. [make of Machine: Swelore/ Any other approved, Make of Motor: KEC/ CGL/ABB/ Any other approved make] |
| 31 | Installation and commissioning of above supplied chlorinator with all accessories, PVC tank and drawing of power line as per IE rules by supplying of necessary wire and continuous earthing. This include the cost of all necessary CC foundation [at least 200mm height] with concrete mixture [sand, cement, stone chips] and neat cement finish by supplying of all required materials and testing the entire set as per direction of EIC. [Power will be feed with supplying main switch & starter] |
| 32 | Testing and commissioning of the entire installation with full satisfaction of EIC. |
| 33 | Labour charges for 1 [one] No operating personnel for operation and guarding of Pump / Valve / Disinfection arrangement with all accessories. |
| 34 | Add GST @ 18% |
| 35 | Add Cess @ 1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysOct 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender