Tender For Certain B/R Repair, Roof Treatment And Camouflage Painting At Depot And Perimeter Area At 23 Fad Suranussi Under Age (I) Suranussi
Tender Value
39.98 Lakhs
Estimated cost
Bid Submission
07 Oct 2026
3 days left
EMD
79960
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalandhar → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Certain B/R Repair, Roof Treatment And Camouflage Painting At Depot And Perimeter Area At 23 Fad Suranussi Under Age (I) Suranussi
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 30-Sep-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 07-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | M&L Demolition of brick work built in cement mortar including all quoins arches, pillars etc but including fair facing dressed stone work and precast concrete articles complete all as specified and as directed |
| 2 | M&L Demolition of cement concrete of any description and in any position not otherwise specifically provided for and pavings not exceeding 15 cm thick above or below ground level complete all as specified and as directed |
| 3 | Demolition of cement Concrete in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work etc complete all as specified and as directed |
| 4 | Taking down cement or cement lime plaster of any description on brick or stone walls, etc incl raking out joints hacking for keys srubbing down with water etc complete all as specified and as directed |
| 5 | Taking down chowkats or frames with Shutters ( without taking off the shutter from the frame ) of area n.exc 1.50 Sqm each and removing from site complete all as specified and as directed |
| 6 | Taking down chowkats or frames with Shutters ( without taking off the shutter from the frame ) of area exc 1.50 Sqm but n.exc 4.00 Sqm & removing from site complete all as specified and as directed |
| 7 | Taking down shutters of any description size exceeding 1 sqm and n.exc 2 sqm & removing from site complete all as specified and as directed |
| 8 | Taking down shutters of any description size exceeding 1 sqm and n.exc 2 sqm but refixing in the same opening complete all as specified and as directed |
| 9 | M & L brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6.0m mean radius built in cement mortar 1:6 all as specified and directed by Engineer – in – Charge. |
| 10 | Ditto all as per item No 09 above but except brick work complete all as specified. |
| 11 | Dismantling wall and Ceiling boards any thickness, including cover fillets complete all as specified and as directed |
| 12 | M&L for 12mm th Gypsum board/tiles for insulation and accoustic purpose 60X60CM in size fixed in frame work /grid complete all as specified and as directed ( Bldg ht upto 10 mtrs) |
| 13 | M&L 605mmX605mmsize anodised Aluminium snap grid frame work for false ceiling with aluminium angle 25X25X1.5mm th and Tee 25X35mmX1.5mm thick and using 2mm GI wire adjustable as suspender in required length complete all as specified and as directed . |
| 14 | Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed by engr-in-charge complete all as specified and as directed |
| 15 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of camouflaging pattern colour having tensile strength of 550 Mpa as in roof covering/cladding to wall ,fixed with J-type hook complete all as specified and as directed |
| 16 | S&F Pre-painted galvalume aluminum zinc coating GI based plain sheet ,sheet 0.50mm thick of camouflaging pattern colour having tensile strength of 550 Mpa as in roof covering/cladding to wall as in fire point,fixed with J-type hook complete all as specified and as directed |
| 17 | Supply & Fixing for wire gauge shutter and skeleton shutter steel windows 1.25 mm thick box type (primer coated) ERW hollow 'P' section of size 60mm x 25mm single rebate comprises of skeleton shutter ERW sec 50 x 20 mm & 1mm thick and openable leaf consisting two nos sash bar of T section 20x3mm complete welded to frame including cutting holes and making good dismanteled portion in cement concrete (1:2:4) type B-I four nos for each window including following fitting welded to shutter complete all as specified and as directed by Engineer-in-Charge :-(i) Hold fast 150mm long 12 mm x 3mm made to shape - 04 Nos each window.(ii) Handle of Z Section 20 x 25 mm, 100mm long 01 Nos each leaf.(iii) MS tower bolt 150 mm long-02 Nos each leaf.(iv) Z Section 20 x 25mm, 100 mm stopper - 01 Nos per leaf(v) Cleat 55 mm long of hollow square 15x20x63mm welded to hinges - 01 Nos per leaf.(vi) MS Box type hinges of size 75 X 12 mm - 02 Nos per leaf.(vii) MS Guard bars square 12mm dia @10 cm c/c with GI frame fixed to window frame.(viii) Fabrication and fixingNote :(i) Two shutters ie wire gauged and glazed shall be fixed in one composite frame and both shutter shall be measured as one unit. (ii) Wire gauge and glass shall be measured and paid for separately under relevant item of schedule. |
| 18 | S & F 1 mm thick Mild steel, plain, black sheet in wall cladding, steel gates and cup board with all locking arrangement similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required |
| 19 | Dismantling posts or struts embedded in brick work/concrete (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground |
| 20 | S & F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering to Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening conforming to GdeFe 290(Gde E-165) complete all as specified and as directed |
| 21 | S&F galvanized mild steel wire cloth 0.56mm dia of wire and average width of aperture 1.18mm fixed with tinned tack or galvanised wire staple complete all as specified and as directed by engineer-in-charge. |
| 22 | S&F in 3mm thick sheet glass ordinary quality glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and as directed. |
| 23 | S & F Steel ventilator with top hung shutter including hinges, steel peg stay, incl glass and wire gauge complete all as specified and directed by engr-in-charge. |
| 24 | M&L for 35 mm thick 2nd clas hard wood,factory made Plain framed, panelled shutter with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated as specified in SSR Part I section 8 clause 8.2(a) complete all as specified and as directed |
| 25 | M&L for 35mm th IInd class Hard Wood glazed /gauged shutters open rebated and prepared to receive glass /gauge etc without sash bars edges of framing plain or chamfered rounded fitted with cut and mitred beads for securing glass/gauge etc all as specified in SSR Part I section 8 clause 8.2(a) including helical Door spring complete all as specified and as directed |
| 26 | S&F solid PVC door frame of size 50mmX 47mm made out of 5mm th plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed |
| 27 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed tothe stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing |
| 28 | S&F 300mm size stainless steel sliding door bolt plate type stove enamelled not less than 12mm dia incl a minimum of six nut and bolts ,four on bolt plate and two on stapple plate complete all as specified |
| 29 | S&F stainless steel barrel tower bolt 200mm size stove enamelled black with bright bolt etc all as specified |
| 30 | S&F 100 mm size mild steel butt hinges medium weight cold rolled complete all as specified and as directed by engineer-in-charge. |
| 31 | S&F floor door stopper aluminium alloy body and tounge 140mm anodised with hard drawn steel spring etc complete all as specified and as directed by engineer-in-charge. |
| 32 | S&F 300mm long mild steel ordinary rat rail rod pattern door spring including roller and roller plate complete all as specified and as directed by engineer-in-charge. |
| 33 | S&F Door closer hydraulically regulated, designation No. 3, universal type,aluminium extruded section suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed |
| 34 | S&F in repair Vitreous china ware water closet Orissa pattern including connecting to trap and to flushing pipe anti Syphonage pipe etc complete , fixed as in repairs of size 580mm X 440mm complete all as specified. complete all as specified and as directed |
| 35 | S&F in repairs vitreous china water closet Padestal pattern( white ) includng 100 mm bore \\"P\\" or \\"S\\" trap but excluding fixing bolts, flushing cistern and flush pipe complete all as directed. |
| 36 | S&F in repairs PVC flushing cistern, 10 ltr capacity, valve less symphonic action type, low level, with intel, ball valve, float valve abd handle including brackets fixed in position, 32 mm dia PVC flush pipe and connection to water mains complete all as specified and directed by engineer-in-charge. |
| 37 | S&F in repairs vitreous china urinals Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with urinal spreader ,grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe)complete all as specified and directed. |
| 38 | S& F in repair vitrious china wash hand basin flat back 550X400mm and padestal incl fixing bracket, and waste pipe, etc all as specified and directed by engineer-in-charge. |
| 39 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), rmoving servicable tiles to store and rubbish off the premises |
| 40 | M&L Granite (of any type) work (table rubbed and polished) 20 mm thick in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 20mm thick screed or bedding layer in CM 1:6 all as specified and directed by Engineer-in Charge |
| 41 | M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match , including 15 mm th screed or bedding layer in CM 1:6 complete all as specified and directed by Engineer-in Charge. |
| 42 | M&L Non-skid coloured ceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles over and including 15 mm th screed or bedding layer in CM 1:6 complete all as specified and directed by Engineer-in Charge. |
| 43 | M&L for glazed ceramic tiles coloured of size 450mmx300mm x 7mm th on vertical surfaces such as in skirting, dado etc including 10 mm th backing coat in CM 1:4 complete all as specified and directed by Engineer-in Charge. |
| 44 | S&F in repairs 600X450mm bevelled edge looking mirror of selected quality glass of 4 mm thick etc mounted on AC board complete all as specified and directed by engineer-in-charge. |
| 45 | S & F Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified. |
| 46 | S&F in replacement 20 mm dia harrison rails stainless steel with decorative finish , with fixing stainles steel brackets , stops, rollers complete all as specified and as directed (two brackets per 1.5 M length and 08 Nos roller per 1.RM) |
| 47 | Taking down GI tubing and connections with all fittings 15 mm bore complete all as specified and as directed by engineer-in-charge. |
| 48 | Ditto all as per item No 47 above but 20mm bore. |
| 49 | S&F 15 mm dia GI tubing , medium grade, and connections fixed to wall or ceiling, laid in floor etc complete all as specified and as directed by engineer-in-charge. |
| 50 | S&F 20 mm dia GI tubing and connections fixed to wall or ceiling, laid in floor etc complete all as specified and as directed by engineer-in-charge. |
| 51 | M & L Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth |
| 52 | S&F in repair PVC shower rose PTMT 15mm size fixed to iron pipe complete all as specified and as directed by engineer-in-charge. |
| 53 | S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed by engineer-in-charge. |
| 54 | S&F in repair 15mm size stop valves ,Angle valve stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed and complete all as specified and as directed by engineer-in-charge. |
| 55 | S&F in repair 20 mm size Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions fixed complete all as specified and as directed by engineer-in-charge. |
| 56 | S&F in repair 15 mm bore dia bib tap (long body) cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for union fancy type chromium plated complete all as specified and as directed by engineer-in-charge. |
| 57 | S&F in repair 15 mm bore Pillar taps swan neck type , cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed |
| 58 | S&F in repair towel rail 600mm long of PTMT incl CP brass srews andwooden/plasticcleats (Minimum weight 190 gms) complete all as specified |
| 59 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified |
| 60 | S&F in repairs Rotational moulded polythene water storage tanks double layer (cylinder each vertical with closed top) of capacity 500 Itrs, hoisted and fixed in position including PVC complete all as specified and as directed |
| 61 | S&F in repairs Rotational moulded polythene water storage tanks double layer (cylinder each vertical with closed top) of capacity 1000 Itrs, hoisted and fixed in position including pvc float valve 20mm size,specified in SSR Pt-1 complete all as specified and as directed |
| 62 | Cleaning and removing all scale and dirt, etc, from tanks of capacity Exc 250 & n exc 500 Ltr and from mouths of circulating pipes, etc complete all as specified and directed by Engineer – in – Charge |
| 63 | Cleaning and removing all scale and dirt, etc, from tanks of capacity Exc 500 & n exc 1000 Ltr and from mouths of circulating pipes, etc complete all as specified and directed by Engineer – in – Charge |
| 64 | Writing letters or figures (Block. Roman, Italic or Indian) n exc. 30 cm high complete all as specified and directed by engineer-in-charge. |
| 65 | Repair ,servicing and overhauling of rolling shutter gear operated type with chain wheel and hand chain of any size by oiling , greasing to gear box , guide channel , shaft , pully and minor repair to gear box, hood cover, pully etc and replacement of minor parts like spring ,pins, lathe etc and including securing guide channel to walls with PCC 1:2:4 type B1 and making gud the surfaces with CM (1:4) and making the rolling shutter functional to the entire satisfaction of the Engineer in charge all as specified and directed by Engineer-in Charge.(Any defected/ Broken part will be replaced without any cost and make rolling shutter fully functional complete all as specified and directed by engineer-in-charge. |
| 66 | S & F in Repairs 1.25 mm thick of laths of steel rolling shutters, gear operated type with bevel gear box and crank handle as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type |
| 67 | M&L 15mm thick cement plastering in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified. (bldg ht may vary upto 10.00mtr). |
| 68 | M&L rendering 15mm thick on fair faces or other than fair faces of brick work in CM 1:4 finished even & smooth without using extra cement all as specified and directed by Engineer - in - Charge (bldg ht may vary upto 10.00mtr). |
| 69 | M&l for 5 mm th rendering in cement mortar in 1:3 on ceiling complete all as specified and as directed (bldg ht may vary upto 10.00mtr). |
| 70 | M&L for two coats of white wash on newly plastered surface of walls incl preparation of surface complete all as specified |
| 71 | M&L for three coats of white wash on newly plastered surface of ceiling incl preparation of surface complete all as specified (bldg ht may vary upto 10.00mtr). |
| 72 | M&L for Preparing surfaces new of walls and applying two coats of cement base paint complete all as specified incl preparation of surfaces. |
| 73 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces (bldg ht may vary upto 10.00mtr). |
| 74 | M&L for preparation of new plastered surface of wall and applying two coat of oil bound distemper over a coat of primer complete all as specified |
| 75 | M&L for preparation of new steel surfaces of any description over 10cms width or girth and applying two coat of syntehtic enamel paint on steel surfaces over a coat of red oxide primer in camouflaging pattern comple all as specified (bldg ht may vary upto 10.00mtr). |
| 76 | M&L for two coats of synthetic enamel paint on new wooden surface over 10 cm width or girth over a coat pink primer incl preparation of surfaces complete all as specified |
| 77 | M&L for one coats synthetic enamel paint on old treated wooden surface over 10 cm width or girth all as specified |
| 78 | M&L preparing old decorated surfaces of walls and applying two coat of white wash complete all as specified |
| 79 | M&L for two coats of white wash on old plastered surface of ceiling incl preparation of surface complete all as specified (bldg ht may vary upto 10.00mtr). |
| 80 | M&L for Complete removal of existing treatment and preparation of old plastered or unplastered surface of wall /roof/Chajja projections incl facia cornices including brooming down or steel wire brushing scrapping down smoke roof,moulds moss and efflorescent salts and trading oil and greasy spots etc and applying two coats of weather proof exterior emulsion paint over a coat of Primer in camouflaging digital pattern as per design/pattern given by Engineer-in-Charge etc. complete all as specified and directed by Engineer-in-Charge Note :- Emulsion to be carried out through air less spray machine (Mechanical means) shade and coloured as approved by Engr-in charge.(bldg ht may vary upto 10.00mtr). |
| 81 | M&L for Complete removal of existing treatment and preparation of old plastered or unplastered surface of wall and applying two coat of oil bound distemper over a coat of primer complete all as specified |
| 82 | M&L preparing old surfaces of walls and applying one coat of cement base paint complete all as specified |
| 83 | M&L for preparation of old painted steel surfaces of any description over 10cms width or girth and applying one coat of syntehtic enamel paint on steel surfaces in camouflaging pattern comple all as specified (bldg ht may vary upto 10.00mtr). |
| 84 | Dismantling brick tile or terracing tile single layer on roof complete all as specified and as directed by engineer-in-charge. (bldg ht may vary upto 10.00mtr). |
| 85 | Demolition of mud in roofs any thickness including plastering and leeping (weather full thickness removed or part there of) complete all as specified and as directed by engineer-in-charge. (bldg ht may vary upto 10.00mtr).. |
| 86 | Demolition of cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed by engineer-in-charge.. |
| 87 | M&L for PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregate ) as in benching ,roof padding, roof kerbs or muds stops coping etc rounded or chamfered on edges complete all as specified and directed. (bldg ht may vary upto 10.00mtr). |
| 88 | M&L for 10 mm thick rendering in cement mortar 1:3 on concrete surfaces when concrete is stilL green finished even and fair including mixing of water proofing compound as per manufacturer instruction etc complete all as specified and as directed. Note :- Water proofing compound shall be measured separately. |
| 89 | Supply only Integral water proofing compound confirming to IS-2645 complete all as specified and as directed by engineer-in-charge. |
| 90 | Cleaning the surface and made free of dirt,foreign particle,laitance followed by grinding all protrusion to make surface modulated.there after inspection for cracks on the surface caused by thermal expiation contraction.cutting the grooves with suitable cutter machine in V groove filled with repair mortar/micro concrete general purpose grout as recommended proportionally as per recommendation of manufacturer.making of gollas as all the corners with polymer modified mortar (1:4) cement sand with 3.5% acrylic of cement weight complete all as specified and directed. |
| 91 | Providing and applying liquid Polyurea-PU based hybrid elastomeric water proofing membrane including fibre mesh between the PU coats at existing/newly constructed roofs, RCC structure like basement raft, retaining wall, water retaining structure, tunnels/subways and bridge deck etc. in two or more coats. The product must have pot life of >90 mins., tensile strength > 12.6 Mpa, elongation of > 500% conforming to ASTM D 2370 & puncture resistance of >200 N as per ASTM E 154 with min. consumption of 1.5 Kg per sqm for 1.2mm DFT in two- three coats. The surface needs to be primed with water soluble self impregnated epoxy primer in two coats to be applied @ 200-250 gms/sqm/coat prior to Polyurea -PU application. Furthermor, (in case the substrate is not suitable) 15mm plaster is advisable for surface prepration before application of the water proofing membrane to avoid pinholes or functional difficulties of the system Note:- The application shall be done by the authorised applicator of the manufacture with a letter of proof stating the authenticity of the applicator firm. |
| 92 | Use and waste of Form work to soffits of suspended slab such as roof slab n exc 200mm thick (horizontal/sloping/vertical) with fair finished surface complete all as specified |
| 93 | Dismantling wrought iron or mild steel work of any description not otherwise provided for |
| 94 | M & L TMT bars 6mm to 8mm dia. cut to length bent to shape required including cranking, bending and binding with and including ms wire (annealed) n. less than 0.9mm dia or securing with clips complete all as specified |
| 95 | M&L Reinforced cement concrete (nominal mix) Type B-0 1:2:4 (12.5mm graded aggregate) in slabs supported on walls, beams, columns deck slabs and in shelves, the like all as specified and directed by Engineer - in - Charge . |
| 96 | M & L Reinforced cement concrete (nominal mix) Type B 0 1:2:4 (12.5mm graded aggregate) in Chajjas all as specified and directed by Engineer - in - Charge |
| 97 | M&L for 75 mm th cement concrete type C-2, 1:3:6 as in plinth protection with using 40mm graded stone aggregateincl making joints at every 2.5m and at corner filled with bitumen 85/25 and sand in ration 1:2 by weight etc complete all as specified and as directed by engineer-in-charge. |
| 98 | M&L for 100 mm th PCC 1:2:4 type B1 (using 20mm graded aggregate) as in flooring incl finishing the surface even and smooth with using extra ement with using plastic dividing strips, 1.5mm thick complete all as specified and as directed by Engineer-in-charge. |
| 99 | Dismantling Matting, single or double any type including, if any |
| 100 | M & L for 3.2/3.3 mm thick Linoleum, plain coloured, laid dry in floors, linoleum is sealed down with an approved adhesiveincluding stretching, cutting and fitting complete all as specified and directed by Engineer-in Charge. |
| 101 | Supply & fixed sliding/opening anodised aluminum door/window/partitions shutters including frame,and made out of hollow extruded alumimum sections as mentioned below. Each door having 02 Nos D type handles, 02 Nos aluminium tower bolts 300 mm size, hydraulic door spring. Shutter to be partly glazed with 5mm thick, plain or tinted glass and partly paneled with 12 mm thick prelaminated particle board fixed with glazing clips, rubber beading / gasket, anodized aluminum beading, screws including bothside openable in door bottom hydraulic double action machine machine complete all as per specified and directed. Chowkat / frame 101.60 x 44.45 x 1.60 mm thick Shutter top and bottom rail : 114.30 x 44.45 x 1.55 mm thick, Shutter middle rail 83.50 x 44.45 x 1.55mm, Shutter verticle style : 85 x 44.45 x 1.55 mm thick.complete all as specified |
| 102 | M & L for repairing of RCC projections ,chajjas,roofs,facia,etc.by necessary preparations i.e.scrapping cutting,chiseling,dusting and cleaning exposed reinforcement ,surface of damaged,loose RCC surface and applying one coat of cement slurry and filling the surface with cement cencrete (1:2:4) using 12.5mm garded crushed stone aggregate and finished with cement sand mortar (1;3) using coarse sand in patches area n exc 5 sqm each and thickness of RCC member exc 50mm including applying two coats of finishes to match with the existing surface in at any height all as directed by Engineer-In-Charge Note : Cost of form work and welded mesh for bldg ht upto 12m ,shall be deemed to be included in unit rate quoted by the contractor. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 30, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 07, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 3 daysOct 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysOct 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender