Tender For Repairs And Maintenance Of Internal Electrical Wiring, Fittings And Fixtures, Led Lights, Earthing Etc And External Electric Supply, Connected Items/ Works At Aerial Bay Under Ge(S) Diglipur.
Tender Value
35 Lakhs
Estimated cost
Bid Submission
01 Oct 2026
18 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
North and Middle Andaman → Andaman And Nicobar Islands
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs And Maintenance Of Internal Electrical Wiring, Fittings And Fixtures, Led Lights, Earthing Etc And External Electric Supply, Connected Items/ Works At Aerial Bay Under Ge(S) Diglipur.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down of any description and in any position for copper/aluminium point wiring (light. Fan, ocket or pwer) complete, including fixture and fittings such as switches,ceiling roses,pendants, regulators, sockets, lightfitting etc, removing materials are as schedule of credit, and making good disturbed surfaces of walls, floors etc complete all as specified and as directed. |
| 2 | M&L for Point wiring using approved colour coding as per IS, with stranded copper conductor 1.5 sqmm (nominal area), single core, flame retardant low smoke(FRLS), PVC insulated and unsheathed cable 1100 volts grade, ISI 694 marked TEC and FIA approved in and including PVC casing and caping/PVC conduit and its fittings ISI marked, with metal flush boxes suitable for modular/normal switch/sockets etc with earth dolly duly painted with two coats of anti corrosive paint over a coat of red oxide primer internally, incl covered with suitable module cover plate with frame including flame retardant low smoke (FRLS) PVC insulated unsheathed stranded copper conductor 1.5 sqmm (nominal are) single core cable as earth continuity conductor to common earth and connected to earth dolly for one light/fan point controlled by one switch & regulator complete all as specified and as directed. |
| 3 | Ditto all as per item No 2 and above but one 3 pin socket outlet, 5 Amps on the same board with other switches, with cables 1.5sqmm ditto |
| 4 | Ditto all as per item No 2 and above but one 3 pin socket outlet, 5 Amps on the independent board with other switches, with cables 1.5sqmm ditto |
| 5 | Ditto all as per item No 2 above but one 3 pin socket outlet 15 Amps independent with cables 4 sqmm size ditto |
| 6 | S&F switch piano, flush type single pole one way 5/6 amps complete all as specified and as directed. |
| 7 | S&F switch piano, flush type single pole one way 16 amps complete all as specified and as directed. |
| 8 | S&F socket outlet 3 pin, 6 amps complete all as specified and as directed. |
| 9 | S&F socket outlet 2 in 1, 3 pin, 6 and 16 amps complete all as specified and as directed. |
| 10 | S&F switch socket combination, 3 pin, 6 amps flush type universal complete all as specified and as directed. |
| 11 | S&F switch socket combination multipurpose flush type 2 in 1 type (3 and 3 pin) 6/16 Amps, 230V, AC complete all as specified and as directed. |
| 12 | S&F in repairs bell push flush type 5 amp complete all as specified and as directed. |
| 13 | S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc as required complete all as specified and as directed. |
| 14 | S&F modular switch 1 way 6 amps, 1 module complete all as specified and as directed. |
| 15 | S&F modular socket 6A-2/3 pin combined 2 module complete all as specified and as directed. |
| 16 | S&F modular switch 1 way 16 amps, 1 module complete all as specified and as directed. |
| 17 | S&F modular socket 6A/16A-2/3 pin combined 2 module complete all as specified and as directed. |
| 18 | S&F modular fan step regulator, 120W- 2 modulecomplete all as specified and as directed. |
| 19 | S&F Buzzer, ding dong AC, 230 volts single pole complete all as specified and as directed. |
| 20 | S&F Bell AC 230Volts single pole complete all as specified and as directed. |
| 21 | S&F Lamp holder, PVC/polycaronate type with cord grip cap sitable for pendant fittings complete all as specified and as directed. |
| 22 | S&F ceiling rose surface bakelite 65x50mm two to three terminal complete all as specified and as directed. |
| 23 | S&F LED light fitting 1X20 watts, 220 V AC decorative box type with driver, holder including LED tubelight conneting upto three core flexible copper conductor cable of suitable size from ceiling rose including taking down of existing complete all as specified and as directed. |
| 24 | S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watts 220 volts, AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size including taking down of existing complete all as specified and as directed. |
| 25 | S&F ground shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size including taking down of existing complete all as specified and as directed.. |
| 26 | S&F LED light fitting 1x9W/1x10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size including taking down of existing complete all as specified and as directed. |
| 27 | S&F LED Luminaire 600mm X 600mm, 35/36 watts, 220 Volts, AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders and LED lamp suitable for roof ceilling including connecting up with drive three core flexible copper conductor cases of suitable size including taking down of existing complete all as specified and as directed. |
| 28 | S&F sheet metal enclosure for DB's Double door, single pole and neutral, 4 way including blacking plate with 200 amp rated bus bar, 240 volts fixed sunk/flush to the wall including taking down of existing complete all as specified and as directed. |
| 29 | Ditto all as per item no 28 above but 8 way ditto |
| 30 | Ditto all as per item no 28 above but 12 way ditto |
| 31 | S&F single pole and nutral enclosure with a two pin and earth plug and socket complete with one single pole 20 amps MCB including taking down of existing complete all as specified and as directed. |
| 32 | S&F sheet metal enclosure for DB's Double door, triple pole and neutral, 4 way including blacking plate with 200 amp rated bus bar, 240 volts fixed sunk/flush to the wall including taking down of existing complete all as specified and as directed. |
| 33 | S&F in repair MCB SP 5 to 32 Amps, 240 Volts, minimum 10 KA, \\"C\\" series rupturing capacity and to be housed in DBs catered here in before complete all as specified and directed. |
| 34 | S&F SPN 40-63 Amps, 240 volts, 10 KA, 'C' curve complete with connection, testing and commissioning complete all as specified and as directed. |
| 35 | S&F 415 Volts, 10KA 'B' curve miniture circuit breaker (MCB) of Triple pole current carring capcity 25 to 63 Amps, in the MCB DB complete with connection testing and commissioning complete all as specified and as directed. |
| 36 | S&F in repair MCB TPN 40 to 100 Amps, 415 Volts, minimum 10 KA, \\"B\\" series rupturing capacity and to be housed in DBs catered here in before complete all as specified and as directed. |
| 37 | S&F rigid non metallic PVC conduit 20mm dia exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hook etccomplete all as specified and as directed. |
| 38 | Ditto all as per item no 37 above but 25mm dia ditto |
| 39 | M&L for sub main wiring with 2 runs of 4.0 sqmm PVC insulated unseathed copper cable multistandard 1100 volts. FRLS RM 301 grade with drawn in PVC casing caping and one run of 4 sqmm PVC insulated copper cable as earth continuity conductor in drawn in PVC casing capping including taking down of existing unservicable any description in any position complete all as specified and as directed.Note: 3 runs of 4 sqmm copper cable and 1 run of PVC casing capping will be measured as one unit. |
| 40 | M&L for sub main wiring with 2 runs of 6.0 sqmm PVC insulated unseathed copper cable multistandard 1100 volts. FRLS RM 301 grade with drawn in PVC casing caping and one run of 6 sqmm PVC insulated copper cable as earth continuity conductorin drawn in PVC casing capping including taking down of existing unservicable any description in any position complete all as specified and as directed.Note: 3 runs of 6 sqmm copper cable and 1 run of PVC casingn capping will be measured as one unit. |
| 41 | M&L for earthing complete with Galvanised steel earth plate eletrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below GL) with top edge of earth plate not less than 1.5 Mtr below normal ground level, earth plate surrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt filled in alternate layers and electrode connections by using Galvanised earth wire 4.00mm dia connected by means of bolts, nuts, check nuts and washer of galvanised iron or steel, provision of 15 mm dia GI pipe medium grade for protection of GI earth wire and 20mm dia GI pipe medium grade for watering arrangement and PCC (1:3:6) , type C1 chamber, MS funnel, wire mesh, 50 mm thick RCC (1:2:4), type-B1 earth pit cover with 6 Nos, 8 mm dia high strength deformed steel TMT bars on both ways including necessary excavation in any type of soil, returning, filling in, removal of surplus soil to distance n exc 50 mtr, provision of charcoal and salt complete all as shown in electrical plate No 5 of schedule Part-I, complete all as specified and as directed. |
| 42 | S&F PVC rectangular block for mounting, switches, sockets, fan regulator etc, with 3mm thick plastic laminated sheet cover of size 100mmx100mm and 50mm deep including taking down of existing unservicable any description in any position complete all as specified and as directed.. |
| 43 | Ditto all as per item no.42 above but size of 175mmx100mm x 50mm deep ditto |
| 44 | Ditto all as per item no.42 above but size 200mmx150mm x50mm deep ditto |
| 45 | Ditto all as per item no.42 above but size 250mmx200mmx 50mm deep ditto |
| 46 | S&F electronic meters temper proof LCD display single phase with poly carbonate cover 230 volts, 10-60 Amps, accuracy class-I, 50Hz, conforming to IS-13779, IP-54, with parameters to show data, time current reading, load PF, voltage and KWH taking down of existing unservicable any description in any position complete all as specified and as directed. |
| 47 | S&F electronic meters temper proof LCD display, 3 phase, with poly carbonate cover 415 volts, 10-60 Amps, accuracy class-I, 50Hz, conforming to IS-13779, IP-54, with parameters to show data, time current reading, load PF, voltage and KWH taking down of existing unservicable any description in any position complete all as specified and as directed. |
| 48 | Taking down of any description and any position for old unseriveable ceiling/exhaust fan, sealing cable end, dismentaling blades and remving fan and blades to store any size/capcity etc complete all as specified and as directed. |
| 49 | S&F Ceiling fans complete with bldades, down rods, electronic regulator and accessories, 230 volts, 1200mm sweep, min air delivery 210 CFM with service value 6.00 BEE, Five star rated with brushless direct current motor(BLDC) all as specified and directed by Engr-in-charge. |
| 50 | S&F exhaust fan, steel body AC single Phase 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and as directed. |
| 51 | S&F exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230V, 50Hz, RPM 1200, copper winding of sweep 300mm complete all as specified and as directed. |
| 52 | M&L for shifting of ceiling fan/exhaust fan any size from one place to another place and making good disturbed susrface of wall complete all as specified and as directed. |
| 53 | M&L for painting of ceiling fans in situ with one coat of synthetic enamel paint by spraying including filling cavities with filler, after cleaning dust etc, complete all as specified and as directed. |
| 54 | Supply only of condenser 2.5 MFD of apporved make for ceiling fan complete all as specified and as directed. |
| 55 | Supply only of condenser 3.5/ 4 MFD of apporved make for echaust fan complete all as specified and as directed. |
| 56 | Supply only GI pipe light grade with all fitting and fixed complete for ceiling fan as down rod 75 cm long of 15 mm bore complete all as specified and as directed. |
| 57 | M&L for replacement for clamps and back plates fabricated from steel section conforming to Gde Fe 410-0 or Fe 310-0 includingnuts, bolts, washers, drilling holes for bolts in any shape or size for fixing ceiling fan complete weighing not more than 2Kg complete all as specified and as directed. |
| 58 | S&F electric water heater, storage type steel body with copper inner tank and heating element upto 2KW capacity 25 liters, BEE 5 star rated complete with all accessories such as safety valve, thermostate, NRV, connection pice etc taking down of existing unservicable any description in any position complete all as specified and as directed. |
| 59 | S&F in replacement of PVC flexible 3 core 1.5 sqmm cable with copper conductor of size 16/0.20 mm from ceiling rose to fan including connection complete all as specified and as directed. |
| 60 | M&L for Inspection and maintenance of water heater (Geyser) of capacity, 25 ltrs to 50 litres including performing the following task at different locations of COSA Military Station. (a) Removing the heather plate assembly and descaling the heating element/pipe either by use of acid or equa cleaner to make it functional complete (b) Checking and setting of thermostat between 70 to 80 degree Celsius (c) Check working of NRV stop cock, pressure release valve and servicing carefully to make it functional (d) Repairing of earthing connection, power switch, socket connection replacement of indicator lamp to make it functional (e) Examine water leakage and rectifying as required and replacement of rubber washer gasket etc to make it functional (f) Inspect over flow vent pipe, safety valve and remove blockage if required to make it functionalcomplete all as specified and as directed. |
| 61 | S&F in repairs of heating element of rating 1.5/2 KW to geyser 25 to 50 litres capacity, any type, complete all as specified and as directed. |
| 62 | S&F in repairs of Thermostate for geyser of capacity 25 to 50 litres any type, make complete all as specified and as directed. |
| 63 | S&F in repairs inner copper tank made out of cold rolled pure electrode type copper sheet double lapped welded internally and hydraulically tested for geyser 25 litres capacity complete all as specified and as directed. |
| 64 | S&F multi function safety valve suitable for Geysers 25/50 ltrs complete all as specified and as directed. |
| 65 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m deep and getting it out in soft/loose soil including forming bottom surface to required level for laying pipes/ cables complete all as specified and as directed. |
| 66 | Returning, filling in excavated soil including spreading, leveling, watering, well ramming in layers not exceeding 25cm complete all as specified and as directed. |
| 67 | Removing the surplus excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above starting point complete all as specified and as directed. |
| 68 | M&L for cement concrete in foundation (1:2:4) Type B1 (using 20mm graded stone) in foundations complete all as specified and as directed. |
| 69 | M&L for cement concrete (1:2:4) Type B2 (using 40mm graded stone) in foundations complete all as specified and as directed. |
| 70 | Supply and laying in replace of light grade GI pipe 40 mm dia with all fittings/fixtures or laying in trenches complete all as specified and as directed. |
| 71 | Ditto all as per item no 70 above but of 80mm dia ditto |
| 72 | Ditto all as per item no 70 above but of 100mm dia ditto |
| 73 | Supply and laying of DWC pipe, ISI marked of outer dia 50mm and inner dia 38mm with smooth internal and profiled external surface for non pressure under ground cable including all connected accessories like coupler,'O' Ring etc, for protection of cable complete all as specified and as directed. |
| 74 | Ditto all as per item No 73 above but outer dia 90mm inner dia 75mm ditto |
| 75 | Ditto all as per item No 73 above but outer dia 110mm inner dia 95mm ditto |
| 76 | Supply and lay XLPE Insulated armoured heavy duty electrical cable with aluminium conductor, 1100 volts grade of size 6 sqmm 2 core including taking down of existing unservicable any description in any position complete all as specified and as directed.Note : Earthwork and other connected items like DWC/GI Pipe measured and paid separately |
| 77 | Ditto all as per item No 76 above but cable size 10 sqmm x 2 core ditto |
| 78 | Ditto all as per item No 76 above but cable size 10 sqmm x 4 core ditto |
| 79 | Ditto all as per item No 76 above but cable size 16 sqmm x 2 core ditto |
| 80 | Ditto all as per item No 76 above but cable size 16 sqmm x 4 core ditto |
| 81 | Ditto all as per item No 76 above but cable size 25 sqmm x 4 core ditto |
| 82 | Ditto all as per item No 76 above but cable size 35 sqmm x 3.5 core ditto |
| 83 | Ditto all as per item No 76 above but cable size 50 sqmm x 3.5 core ditto |
| 84 | Ditto all as per item No 76 above but cable size 70 sqmm x 3.5 core ditto |
| 85 | Ditto all as per item No 76 above but cable size 95 sqmm x 3.5 core ditto |
| 86 | Ditto all as per item No 76 above but cable size 120 sqmm x 3.5 core ditto |
| 87 | Ditto all as per item No 76 above but cable size 150 sqmm x 3.5 core ditto |
| 88 | Ditto all as per item No 76 above but cable size 185 sqmm x 3.5 core ditto |
| 89 | Ditto all as per item No 76 above but cable size 240 sqmm x 3.5 core ditto |
| 90 | Ditto all as per item No 76 above but cable size 300 sqmm x 3.5 core ditto |
| 91 | S&F aluminum lugs 10 sqmm to 25 sqmm complete all as specified and as directed. |
| 92 | S&F of lugs aluminum of sizes 35 sqmm to 70 sqmm complete all as specified and as directed. |
| 93 | S&F of lugs aluminum of sizes 95 sqmm to 150 sqmm complete all as specified and as directed. |
| 94 | S&F of lugs aluminum of sizes 240 sqmm to 300 sqmm complete all as specified and as directed. |
| 95 | Supply and Fix cable jointing kit for 1.1 KV grade cable for straight through joint complete with jointing material heat shrink type and accessories suitable for 3.5 core /4 core XLPE, Armoured Al conductor cable of size 25 to 50 sqmm, indoor/out type complete all as specified and as directed. |
| 96 | Ditto all as per item No 95 above but cable size 70 to 120 sqmm ditto |
| 97 | Ditto all as per item No 95 above but cable size 150 to 185 sqmm ditto |
| 98 | Ditto all as per item No 95 above but cable size 240 to 300 sqmm ditto |
| 99 | Supply and fix cable jointing kit for 1.1 KV grade cable for end termination joint complete with jointing material heat shrink type and accessories suitable for 3.5 core /4 core XLPE, Armoured.Al conductor cable of size 25 to 50 sqmm, indoor/out type complete all as specified and as directed. |
| 100 | Ditto all as per item No 99 above but cable size 70 to 120 sqmm ditto |
| 101 | Ditto all as per item No 99 above but cable size 150 to 185 sqmm ditto |
| 102 | Ditto all as per item No 99 above but cable size 240 to 300 sqmm ditto |
| 103 | M&L for Painting of street light poles, by removing of old paint & applying one coat of red oxide metal primer and two coats of approved aluminium paint to steel tubular swaged pole, cross arm and service bracket complete all as specified and as directed. |
| 104 | M&L for Painting of RCC pole by Cement wash with Portland cement slurry to a smooth bodied opaque finish complete all as specified and as directed. |
| 105 | M&L for dismantling steel poles/ struts, any size, supply and errecting Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 (9.00 metres long) complete all as specified and as directed.Note:- Necessary earth work and PCC foundation, coping measured and paid separately. |
| 106 | M&L for dismantling concrete poles/ struts, any size, supply and errecting Prestressed concrete pole, 9.0 metres long, 102mm x 172mm at top and l2mm x 279mm at bottom, class 10 complete all as specified and as directed.Note: Necessary earth work and PCC foundation, coping measured and paid separately. |
| 107 | M&L for Copper strip 20 x 3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground including taking down with all fitting complete all as specified and as directed. |
| 108 | M&L for Galvanized iron strip 32 x 6mm buried in ground or fitted with wall/ Pole including taking down with all fitting complete all as specified and as directed. |
| 109 | S&F Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire complete all as specified and as directed. |
| 110 | Dismantling and taking down any wattage or size of street light/flood light/ post top lantern fittings for repair or replacement complete all as specified and as directed. |
| 111 | S&F in repairs LED bollard light fitting 10W IP 66 sustainble performance complete all as specified and as directed. |
| 112 | S&F LED street light fitting 35/45 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed. |
| 113 | Ditto all as per item No 112 above but 70 Watt ditto |
| 114 | Ditto all as per item No 112 above but 120 Watt ditto |
| 115 | S&F LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and as directed. |
| 116 | Ditto all as per item No 115 above but 100 Watt ditto |
| 117 | Ditto all as per item No 115 above but 120/150 Watt ditto |
| 118 | S&F post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and as directed. |
| 119 | Ditto all as per item No 118 above but 40 Watt ditto |
| 120 | S&F all in one series solar street light 24W High efficiency mono crystaline solar PV modules. lituium ferro phosphate battery with in built BMS technology, High efficeincy LED, MPPT solar charge controller and aluminium extruded body, authomatically control the dimming and brigtness of light complete all as specified and as directed. |
| 121 | S&F of Street Light fitting GI bracket suitable for fixing of street light fitting by fabricating the size of 25/32 mm dia Light grade GI pipe of length 1.2 mtr and suitable bend complete all as specified and as directed. |
| 122 | Supply and Fix LT Junction box for street lights, Sheet Moulding Compound (SMC), hinged door type and locking arrangenment, off white colour of size 140 x 140 x 95 mm (internal daimention) comprising 02 Nos Al busbar of adequate capacity including suitable size MS clamps, complete all as specified and as directed. |
| 123 | Ditto all as per item No 122 above but SMC box size 240x130x95 ditto |
| 124 | Supply, fixing, connecting and testing on load change over switch, 4 pole, 415 volts, AC with SS enclosure, side handle operated including necessary electrical connection of 125 Amps capacity complete all as specified and as directed. |
| 125 | Disconnecting and taking down the existing old unserviceable MCCB/ MCB for existing Feeder piller box complete all as specified and as directed. |
| 126 | S&F MCCB 3 pole 415 Volts fixed type 25 to 100 Amps with breaking capacity 16 KA complete all as specified and as directed. |
| 127 | S&F MCCB 4 pole 415 Volts 16 KA 16 A to 63 Amps complete all as specified and as directed. |
| 128 | S&F MCCB 4 pole 415 Volts 16 KA 100Amps complete all as specified and as directed. |
| 129 | S&F MCCB 4 pole 415 Volts 16 KA 125Amps complete all as specified and as directed. |
| 130 | S&F MCCB 4 pole 415V adjustable type 160 Amps with breaking capacity 36 KA complete all as specified and as directed. |
| 131 | S&F MCCB 4 pole 415V adjustable type 200 Amps with breaking capacity 36 KA complete all as specified and as directed. |
| 132 | S&F MCCB 4 pole 415V adjustable type 250 Amps with breaking capacity 36 KA complete all as specified and as directed. |
| 133 | S&F 415V 10 KA MCB TP 25 to 63 Amps capacity complete all as specified and as directed. |
| 134 | S&F 415V 10 KA MCB TPN/FP 16 to 32 Amps capacity complete all as specified and as directed. |
| 135 | S&F 415V 10 KA MCB TPN/FP 40 to 100 Amps capacity complete all as specified and as directed. |
| 136 | M&L for wiring with 1100 volt grade, 2 runs of 1.5 sqmm single core FRLSH PVC insulated unsheathed multi stranded copper conductor cable drawn through rigid PVC conduit from street light in box/looping box to street light fitting along with 1.5 sqmm single core FRLSH PVC multi stranded copper conductor cable green in colour as contineous earth wire complete all as specified and as directed. |
| 137 | M&L for earthing complete with galvanised steel earth plate electrod 60cmx60cmx60mm thick buried directly in ground ( each pit not less than 2.25 mtr below ground level) with Top edge of earth plate not less than 1.5 mtr below normal ground level, including provision of galvanised earth strip 32x6 mm connected by means of bolts, nuts, check nuts and washers of galvanised iron steel, provision of 40mm dia GI pipes medium grade for earth wire protection connected from earth plate electrode to main switch board, provision of 15 mm dia GI pipe perforated medium medium grade for glatering arrangement and PCC 1:3:6 type C1 chamber, MS funnel, wire mesh, 50 mm thick RCC 1:2:4 type B1 for earth pit. Cover with 6 No's 8 mm dia high strength deformed steel TMT bars on both ways, including test terminal block made of gun metal or phosphorous bronze 75x75x25 mm and drilled and screwed including 3 nos 8 mm dia, 25 mm long at hex head screw also necessary excavation in any type of soil, returning, filling in, removal of surplus soil to a distance n.exc. 50 mtr, provision of char coal and salt complete all as shown in electrical plate No 3 of schedule Part-1 of 2009 complete all as specified and as directed. |
| 138 | M&L for painting of LT Panel of any type ( indoor / outdoor) by removing of old paint & applying one coat of red oxide metal primer and two coats of approved eanmel paint to LT Panel complete all as specified and as directed. |
| 139 | Servicing of solar power generating PV modules for security lighting system, mounted on poles of approx height 5.0mtr by cleaning the photo voltaic panel using soft cloth and cleaning agent, adjusting to the proper direction and preperation of old paited surfaces of Galvanized iron pole painting with two coats of aluminium paint on poles and on all iron surfaces/steel surfaces, complete all as specified and as directed.Note- replacing the defective parts/components required will be measured and paid seperately .under relevant items as \\"supply only\\", |
| 140 | S&F in repair tubular lead battery 12V,100 AH complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysOct 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender