Tender For Certain B/R Work Services At Sarmat Range At Af Stn Jamnagar Under Ge (Af) Jamnagar No. 1
Tender Value
30 Lakhs
Estimated cost
Bid Submission
24 Sep 2026
12 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jamnagar → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Certain B/R Work Services At Sarmat Range At Af Stn Jamnagar Under Ge (Af) Jamnagar No. 1
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed by Engr-in-Charge. |
| 2 | Supply and fixing pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed by Engr-in-Charge. |
| 3 | Material & Labour for pre-painted galvalume aluminum Zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof ridges etc fixed with self drilling screws, complete all as specified and directed by Engr-in-Charge. |
| 4 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed by Engr-in-Charge. |
| 5 | Supply and fixing roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) (Fe-410-W(Gde-E-250) quality-B) including distance pieces, cleats etc., complete all as specified and directed by Engr-in-Charge. |
| 6 | Supply and fixing steel work in tubular trusses including special shaped washer etc., complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240, complete all as specified and directed by Engr-in-Charge. |
| 7 | Supply and fixing in repairs Steel rolling shutters made of 1.00 mm thick lath, with ball bearing, as specified including top cover, anchoring rod, hasp and staple, errected in position as indicated, complete gear operated type with bevel gear box and crank handle, complete all as specified and directed by Engr-in-Charge.Note : - Ball bearing will be measured and paid seperately. |
| 8 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards / slabs / blankets, any thickness, including cover fillets, complete all as specified and directed by Engr-in-Charge. |
| 9 | Supply and fixing false ceiling of Non asbestos fiber cement building boards, manufactured from homogeneous mixture of cement, quartz and cellulose and cured with high pressure steam using auto claving process confirming to IS-14862, of size 600mm x 600mm x 4mm thick fixed over and including anodised aluminium powder coated (minimum thickness of powder coating 50 micron) snap grid frame work of T Section (main & cross member) of size 25mm x 25mm x 1.5mm thick in square pattern of grid size 600mm x 600mm. The aluminium frame work will supported on side wall with the used of alumminium 'L' section of size 25mm x 25mm x 1.5mm angles etc. Snap grid shall be supported with hangers of 4mm dia, galvanised iron wire adjusting level fixed to roof slabs/truss etc by means of ceiling cleats made out of galvanised iron flat of size 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long, complete all as specified and directed by Engr-in-Charge. |
| 10 | Taking down chowkhats or frames not exceeding 1.5 Sqm each with shutters (without taking off shutters from the frame), complete all as specified and directed by Engr-in-Charge. |
| 11 | Taking down chowkhats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutters (without taking off shutters from the frame), complete all as specified and directed by Engr-in-Charge. |
| 12 | Supply and fixing of solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling and fixing in opening, complete all as specified and directed by Engr-in-Charge. |
| 13 | Supply and fixing of factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of M.S tubes for top and bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel moulded plain colour PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site, complete all as specified and directed by Engr-in-Charge. |
| 14 | Supply and fixing in position anodised aluminium powder coated (minimum thickness of powder coating 50 micron) three track window (two shutter glazed & one shutters wire gauge) with frame, glazed with 4mm thick tinted glass, and wire gauge with stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm including rubber bead joining cleat for fixing in position, concealed type lock for all two shutter, PVC roller etc all as specified below, complete all as specifed including taking down old window. (a) Frame (top & side ) section shall of size 92.00 x 31.75 x 1.50mm (Section o 20831).(b) Frame (bottom) section shall of size 92.00 x 31.75 x 1.50mm (section No 20832).(c) Top & side members of shutter section shall be of size 18.00 x 40.00 x 1.55mm (Section No 20738).(d) Shutter interlock section shall be size 18.00 x 40.00 x 1.45mm (Section 20737)(e) Bottom members of shutter section shall be size 18 x 40.00 x 1.55mm (Section No 20736)Note : Section Nos given above are of make Jindal, contractor may use similar setion of other make mention in PS of CA. |
| 15 | Supply and fixing aluminium (powder coated with approved colour) ventilator, partially glazed and partially louvers, outer frame & mullion fabricated with alumimium section of size 82.50mm x 38.00mm x 1.5mm thick (Cat No 20036), half portion glazed with 4mm thick frosted glass including rubber beading & glazing clip, half portion louvers of 80mm wide & 4mm thick frosted glass including alumimium louver patti including SS wire gauge of fixing of 0.36mm dia and 1.40 width of aperture with 25x3mm thick aluminium strip with screw to upper half portion of ventilator all fitting & fixture and fixed in position including taking down old ventilator, complete all as specified and directed by Engr-in-Charge.Note : Section Nos given above are of make Jindal, contractor may use similar setion of other make mention in Appx B |
| 16 | Supply and fixing for aluminium partition wall of section as in frame/ single double grove of section 65.5 x 38.10 x 2.00mm thick including 5mm thick tinted glass, 20mm thick pre laminated partical board with all neccessary fitting. Vertical section has to be supported with angle of soze 65x65x6mm tick including making good to existing surface, complete all as specified and directed by Engr-in-Charge. |
| 17 | Supply and fixing 150mm long aluminium anodised barrel tower bolt of exturded section, complete all as specified and directed by Engr-in-Charge. |
| 18 | Supply and fixing 100mm long aluminium anodised barrel tower bolt of exturded section, complete all as specified and directed by Engr-in-Charge. |
| 19 | Supply and fixing of Aluminium handles, cast type anodised 150mm, complete all as specified and directed by Engr-in-Charge. |
| 20 | Supply and fixing of Aluminium handles, cast type anodised 100 mm, complete all as specified and directed by Engr-in-Charge. |
| 21 | Supply and fixing of Butt hinges medium weight cold rolled mild steel and fixed in 100mm, complete all as specified and directed by Engr-in-Charge. |
| 22 | Supply and fixing for Butt hinges, medium weight, cold rolled mild steel, and fixed, size of hinges in 75mm, etc., complete all as specified and directed by Engr-in-Charge. |
| 23 | Supply and fixing in repair Aluminium alloy anodised, sliding door bolts with hasp, staples (bolt type) and fixing clip of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed of size 300mm, complete all as specified and directed by Engr-in-Charge. |
| 24 | Supply and fixing in repair Aluminium (Die cast body) Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 kg and fixed, complete all as specified and directed by Engr-in-Charge. |
| 25 | Demolition of brick work or stone masonry, built in cement mortar, complete all as specified and directed by Engr-in-Charge. |
| 26 | Material & Labour for Precast cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) as in block masonry with soild bocks, exc 10cm width and set in cement mortar 1:6, complete all as specified and directed by Engr-in-Charge. |
| 27 | Taking down cement plaster on brick wall, ceilings etc, racking out joints, hacking for key & scrubbing with water, complete all as specified and directed by Engr-in-Charge. |
| 28 | Material & Labour for rendering 15mm thick in cement plaster in CM 1:6 on fair faces of brick or concrete, external surfaces of walls finished the surface fair and even without using extra cement, complete all as specified and directed by Engr-in-Charge. |
| 29 | Material & Labour rendering 10mm thick in Cement Mortar 1:4 on fair faces of brick or concrete, internal surfaces of walls finished the surface fair and even without using extra cement, complete all as specified and directed by Engr-in-Charge. |
| 30 | Material & Labour for preparation of newly plastered or un plastered surfaces of walls and applying two coats of oil bound distemper over one coat of primer incl a coat of cement based wall care putty, complete all as specified and directed by Engr-in-Charge. |
| 31 | Material & Labour for preparation of old plastered or un plastered surfaces of ceiling and applying one coats of oil bound distemper, complete all as specified and directed by Engr-in-Charge. |
| 32 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new/old surfaces (exterior weather coat) paint in normal/camouflage pattern as directed by Engr-in-Charge of any tint as approved over one coat of primer, complete all as specified and directed by Engr-in-Charge. |
| 33 | Supply and fixing in repair vitrious squating pan orrisa pattern Size 580mm x 440 mm white with integral foot rest including P or S trap and connection to pipe, complete all as specified and directed by Engr-in-Charge. |
| 34 | Supply and fixing in repairs for vetrious china wash down water closet pan of padestel pattern white with P or S trap including, seat cover etc., complete all as specified and directed by Engr-in-Charge. |
| 35 | Supply and fixing in repair PVC valve less syphonic action low level Flush 10 Ltr capacity, complete all as specified and directed by Engr-in-Charge. |
| 36 | Supply and fixing in repair PVC connections 15 mm size with PTMT nuts of length 450mm, complete all as specified and directed by Engr-in-Charge. |
| 37 | Supply and fixing in repair Bib taps 15 mm chromium plated long body, complete all as specified and directed by Engr-in-Charge. |
| 38 | Material & Labour for Bib taps, chromium plated with fancy type, screwed down, screwed for iron pipe or for brass ferrule and fixed, Bore dia of pipe in 15 mm, etc., complete all as specified and directed by Engr-in-Charge. |
| 39 | Supply and fixing in repair looking mirror of selected quality size 600mm x 450mm mounted on PVC/ Aluminium frame, fixed to wooden plugs with chromium plated brass screws, complete all as specified and directed by Engr-in-Charge. |
| 40 | Supply and fixing in repair Vitreous China half stall urinals, (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe), complete all as specified and directed by Engr-in-Charge. |
| 41 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as specified and directed by Engr-in-Charge. |
| 42 | Material & Labour for non-skid coloured ceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, over 15mm thick in Cement Mortar (1:6) in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles, complete all as specified and directed by Engr-in-Charge. |
| 43 | Material & Labour for non-skid coloured ceremic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding .18 sqm, over 15mm thick in Cement Mortar (1:6) in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles, complete all as specified and directed by Engr-in-Charge. |
| 44 | Material & Labour for dark shade Vitrified Ceramic tiles 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, over 15 mm thick with Cement Mortar (1:6) in floors etc in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed by Engr-in-Charge. |
| 45 | Material & Labour for glazed ceramic tiles in veticle surfaces 350x 250x7mm/ 450X 350X 7mm thick set and joint in neat cement slurry on 10mm thick plastering in Cement Mortar 1:4 and pointed in white or colour cement to match, complete all as specified and directed by Engr-in-Charge. |
| 46 | Material & Labour for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like set and jointed in cement paste including backing coat in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed by Engr-in-Charge. |
| 47 | Removal of existing roof treatment consisting of screed bed, tar felts of any description etc., and removal of debris out side MD land, complete all as specified and directed by Engr-in-Charge. |
| 48 | Material & Labour for screed bed or bedding layer of mortar 10mm thick in cement mortar 1:4 including mixing only liquid water proofing compound as per manufacturers' instructions and finishing the surface fair and even, complete all as specified and directed by Engr-in-Charge.Note:- WPC will be measured & Paid separately |
| 49 | Material & Labour for PCC in roof pading, filling and mass concrete type B-1, 1:2:4 (using 12.5 mm graded stone aggregate), complete all as specified and directed by Engr-in-Charge. |
| 50 | Supply only liquid water proofing compound, complete all as specified and directed by Engr-in-Charge. |
| 51 | Material and labour for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application, complete all as specified and directed by Engr-in-Charge. |
| 52 | Demolition of concrete (un-reinforced) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) including removal of debris to a distance exc 1.5 km but n.exc 2 km, complete all as specified and directed by Engr-in-Charge. |
| 53 | Demolition of laid dry or laid dry and pointed Stone slabs and tiles of any description or thickness in floors, aprons etc., complete all as specified and directed by Engr-in-Charge. |
| 54 | Material & Labour for 75mm thick cement concrete type D-2, 1:4:8 (40mm graded aggregate) in sub-floors, sub-bases, floors and pavings etc., complete all as specified and directed by Engr-in-Charge. |
| 55 | Material & Labour for sand cushioning 25mm thick over concrete surfaces, spread, complete all as specified and directed by Engr-in-Charge. |
| 56 | Material & Labour for machine pressed precast concrete interlocking paver block of approved shape and size of 60mm thickness, with minimum compressive strength of 35N/sqm (M-35), without correction factor for chamfering, made in rubber moulds with 0.50mm thick scratch proof lacquer coating on top surface, with grey cement and pigment laid, complete all as specified and directed by Engr-in-Charge. |
| 57 | Supply and fixing for Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame, complete all as specified and directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysSep 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender