Tender For Special Repair/Replacement Of Boundary Wall In Domestic Area At Af Tn Gwalior
Tender Value
67.96 Lakhs
Estimated cost
Bid Submission
15 Oct 2026
0 days left
EMD
1.27 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gwalior → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair/Replacement Of Boundary Wall In Domestic Area At Af Tn Gwalior
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 08-Oct-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 15-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar ficings, dressed stone work and pre-cast concrete articles complete all as specified and directed. |
| 2 | Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., and getting out in Hard/ Dense soil complete all as specified and directed. |
| 3 | Removing Excavated soils exceeding 250 M but not exceeding 500 M and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and directed. |
| 4 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soils complete all as specified and directed. |
| 5 | M&L for Plain Cement Concrete 1:4:8 Type D2 (using 40 mm graded granite stone aggregate) in foundations, filling and mass concrete complete all as specified and directed. |
| 6 | M&L for Reinforced cement concrete M-25 (design mix) 20mm graded aggregates in foundations, including rafts, footing, foundation beams; plinth beams; bases for columns, etc ; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 7 | M&L Reinforced cement concrete M-25 (design mix) 20mm graded aggregates in Columns, pillars, piers, posts and struts complete all as specified and directed. |
| 8 | M&L Reinforced cement concrete M-25 (design mix) 20mm graded aggregates in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilaster and buttresses complete all as specified and directed. |
| 9 | M&L formwork to sides of concrete, foundations, footing, bases of columns, raft and raft beams, sides of soffits (if any) of foundation and plinth beams ; and similar work; vertical or to batter complete all as specified and directed. |
| 10 | M&L Formwork to sides of pillars, posts, struts, piers, columns, and stanchions of square, rectangular or polygonal complete all as specified and directed. |
| 11 | M&L Formwork to faces of walls, retaining walls, abutments, parapets and staircase railing and similar work including attached pillasters, buttresses, etc.; vertical or to better complete all as specified and directed. |
| 12 | M/L for rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surface finishing even and smooth without using extra cement complete all as specified and directed. |
| 13 | M & L for Preparing surfaces newly plastered surface or unplastered new surface of wall and painting walls with two coat Premium Acrylic Smooth exterior paint with Silicone additives of required shade applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete all as specified and directed. |
| 14 | M&L for Mild steel TMT bars, 10 mm dia and over cut to length bent to shape required , including cranking , bending, spirally for hooping for columns , hooking ends and binding with mild steel wire (annealed) not less 0.9mm dia of securing with clips complete all as specified and directed. |
| 15 | Ditto as per srl item No. 14 above but using 5 mm dia and above upto and includinding 10mm dia in stirrups,spacers and binders complete all as specified and directed. |
| 16 | S & F MS Joist, channel, angle, or tee sections, fixed independently, without connection plate, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) including cutting to shape as directed, drilling holes notching for wire , welding etc. of \\"Fe 410-W (Gde E-250) quality B\\"(Flat iron fillets for securing wires complete all as specified and directed. |
| 17 | S&F for galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and orovising of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed. Note :- Each line wire to be measured seperately. |
| 18 | M&L for MS Plates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes, withriveted, bolded or welded attachemnt complete all as specified and directed. |
| 19 | M & L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surface over 10 cm width or girth, not otherwise described complete all as specified and directed. |
| 20 | S&F of CONSERTINA super razor punch barb tape (SRPBT) aluminium base helix coil with and include necessry GI Fixing clips for securing complete all as specified and as directed with following specification : (i) Dia of coil(unstreched-600mm) (ii) No of circle-51 turns per coil (iii) weight of each coil with hessian pack 8.5 kg (iv) coverage per coil -8 RM (v) cental core wire: made from 2.6 mm dia GI H.T.SS wire as per IS-4454 galvanised as per IS-2629 (vi) Razor punched strip:-Razor punched tape is CONSECZAL steel comprising of AL base with Zinc alloy @ 150gm/M2 confirming to ASTM-729/A-729M with additional primer treatment of epoxy/Polyurethane & final paint top coat of caulified green shade (BSL 139) by Hot dipping process complete all as specified and directed. |
| 21 | M&L for 110mm bore PVC pipe(SWR) as in weep holes complete all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 08, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 15, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
TodayOct 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayOct 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender