Tender For Repair To Plinth Protection, Flooring And Allied Works In Tech Area At Af Stn Jamnagar Under Ge Af Jamanagar No.1
Tender Value
30 Lakhs
Estimated cost
Bid Submission
24 Sep 2026
12 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jamnagar → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Plinth Protection, Flooring And Allied Works In Tech Area At Af Stn Jamnagar Under Ge Af Jamanagar No.1
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of concrete (un-reinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) including removal of debris to out of MoD land, complete all as specified and direced by Engr-in-Charge. |
| 2 | Material and Labour for 75mm thick PCC(1:3:6) type C- 2, (using 40mm graded aggregate) as in plinth protection finished surface even and fair without using extra cement, complete all as specified and direced by Engr-in-Charge. |
| 3 | Material and Labour for PCC 1:4:8 type D-2 (using 20mm agg. ) in sub base of flooring including demolition, complete all as specified and direced by Engr-in-Charge. |
| 4 | Material and Labour for 100mm thick cement concrete type D- 2, 1:4:8 (40mm graded aggregate) in sub-floors, sub-bases, floors and pavings etc., complete all as specified and direced by Engr-in-Charge. |
| 5 | Material and Labour for 75mm thick hardcore of gauge not exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, complete all as specified and direced by Engr-in-Charge. |
| 6 | Material and Labour for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658 -2006 of 60mm thickness, with grey cement, pigment with 25mm thick sand filling including dismantling and rubbish off the primises, complete all as specified and direced by Engr-in-Charge. |
| 7 | Forming Construction (DUMMY) joints 65mm deep x10mm wide, filled with sealing compound grade A, complete all as specified and direced by Engr-in-Charge. |
| 8 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as specified and direced by Engr-in-Charge. |
| 9 | Material and Labour for providing 75mm thick cement concrete (1:2:4) type B2 using 40mm graded stone aggregate as in floors, complete all as specified and direced by Engr-in-Charge. |
| 10 | Material and Labour for Non-skid coloured ceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, over 15mm thick Cement Mortar (1:6) in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles, complete all as specified and direced by Engr-in-Charge. |
| 11 | Material and Labour for dark shade Vitrified Ceramic tiles 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, over 15mm thick Cement Mortar (1:6) in floors etc in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and direced by Engr-in-Charge. |
| 12 | Material and Labour for glazed ceramic tiles in veticle surfaces 350x 250x7mm / 450X 350X 7mm thick set and joint in neat cement slurry on 10mm thick plastering in Cement Mortar 1:4 and pointed in white or colour cement to match, complete all as specified and direced by Engr-in-Charge. |
| 13 | Taking down chowkhats or frames not exceeding 1.5 sqm each with shutters (without taking off shutters from the frame), complete all as specified and direced by Engr-in-Charge. |
| 14 | Supply and fixing of solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling and fixing in opening as per specification and drawing, complete all as specified and direced by Engr-in-Charge. |
| 15 | Supply and fixing of factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of M.S tubes for top and bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel moulded plain colour PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing, complete all as specified and direced by Engr-in-Charge. |
| 16 | Supply and fixing of 100mm long aluminium anodised barrel tower bolt of exturded section, complete all as specified and direced by Engr-in-Charge. |
| 17 | Supply and fixing of Aluminium handles, cast type anodised 100mm, complete all as specified and direced by Engr-in-Charge. |
| 18 | Supply and fixing for Butt hinges, medium weight, cold rolled mild steel, and fixed, size of hinges in 75mm, etc., complete all as specified and direced by Engr-in-Charge. |
| 19 | Demolition of brickwork or stone/ boulder masonry / PCC block masonry, built in cement or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and direced by Engr-in-Charge. |
| 20 | Material and Labour for Precast cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in block masonry with soild bocks, exc 10cm width and set in cement mortar 1:6, complete all as specified and direced by Engr-in-Charge. |
| 21 | Material and Labour rendering 15mm thick in cement plaster 1:6 on fair faces of brick or concrete, external surfaces of walls finished the surface fair and even without using extra cement, complete all as specified and direced by Engr-in-Charge. |
| 22 | Taking down cement plaster on brick wall, ceilings etc, racking out joints, hacking for key & scrubbing with water, complete all as specified and direced by Engr-in-Charge. |
| 23 | Material and Labour for rendering 10mm thick in Cement Mortar 1:4 on fair faces of brick or concrete, internal surfaces of walls finished the surface fair and even without using extra cement, complete all as specified and direced by Engr-in-Charge. |
| 24 | Material and Labour for preparation of newly plastered or un plastered surfaces of walls and applying two coats of oil bound distemper over one coat of primer including a coat of cement based wall care putty, complete all as specified and direced by Engr-in-Charge. |
| 25 | Supply and fixing in repair PVC ball valve 20mm dia high pressure of PTMT with epoxy coated aluminium rod and high density plasic ball screwed for iron pipe and fixed (minimum weight 15 gms- 142 gms), complete all as specified and direced by Engr-in-Charge. |
| 26 | Dismantling of PVC water tanks exe 250 ltrs but not exe 500 ltrs, complete all as specified and direced by Engr-in-Charge. |
| 27 | Dismantling water tank any type and any position from site of capacity 1000 litres, complete all as specified and direced by Engr-in-Charge. |
| 28 | Supply and fixing 500 ltr Rotaional moulded polyethylene water storage tanks cylindrical vertical with closed top hoisted and fixed in position, complete all as specified and direced by Engr-in-Charge. |
| 29 | Supply and fixing 1000 Ltr Rotaional moulded polyethylene water storage tanks cylindrical vertical with closed top hoisted and fixed in position, complete all as specified and direced by Engr-in-Charge. |
| 30 | Taking down 15mm bore steel tubing and connections in any position, complete all as specified and direced by Engr-in-Charge. |
| 31 | Taking down 20mm bore steel tubing and connections in any position, complete all as specified and direced by Engr-in-Charge. |
| 32 | Supply and fixing GI tube 15mm dia midium graded with all fitings to wall, celing or laying in trenches, complete all as specified and direced by Engr-in-Charge. |
| 33 | Supply and fixing GI tube 20mm dia medium grade galvanised, with all fitting and fixed to walls and ceilings or laid in floors, complete all as specified and direced by Engr-in-Charge. |
| 34 | Supplying and laying of 20mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors, including taking down old pipes, complete all as specified and direced by Engr-in-Charge. |
| 35 | Supply and fixing in repair Vitreous china wash basin, white flat back, size 550mm x 400mm with padestal excluding taps, waste pipe but including waste cupling of PTMT of 32mm bore dia including brackets etc., complete all as specified and direced by Engr-in-Charge. |
| 36 | Supply and fixing in repair pillar tape 15mm CP fancy type with capstan heads, screwed down high pressure with or with out lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipes and fixed, complete all as specified and direced by Engr-in-Charge. |
| 37 | Supply and fixing in repair vitrious squating pan orrisa pattern Size 580mm x 440mm white with integral foot rest including P or S trap and connection to pipe, complete all as specified and direced by Engr-in-Charge. |
| 38 | Supply and fixing in repairs for vetrious china wash down water closet pan of padestel pattern white with P or S trap including, seat cover etc., complete all as specified and direced by Engr-in-Charge. |
| 39 | Supply and fixing in repair Toilet paper holder of S/S fixed to walls with screws, complete all as specified and direced by Engr-in-Charge. |
| 40 | Supply and fixing in repairs plastic water closet seat, closed pattern with flat bottom and cover and mild steel chromium plateed or aluminised hinging device, complete all as specified and direced by Engr-in-Charge. |
| 41 | Supply and fixing in repair PVC valve less syphonic action low level Flush 10 Ltr capacity, complete all as specified and direced by Engr-in-Charge. |
| 42 | Supply and fixing in repair PVC connections 15 mm size with PTMT nuts of length 450mm, complete all as specified and direced by Engr-in-Charge. |
| 43 | Supply and fixing in repair Bib taps 15mm chromium plated long body, complete all as specified and direced by Engr-in-Charge. |
| 44 | Supply & Fixing Bib taps, chromium plated with fancy type, screwed down, screwed for iron pipe or for brass ferrule and fixed, Bore dia of pipe in 15 mm, etc., complete all as specified and direced by Engr-in-Charge. |
| 45 | Supply and fixing in repairs stop cock chromium plated fancy type 15mm dia., complete all as specified and direced by Engr-in-Charge. |
| 46 | Supply and fixing in repair Angle Stop valves fancy type brass chromium plated with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed 15mm dia pipes, complete all as specified and direced by Engr-in-Charge. |
| 47 | Supply and fixing in repair 20mm bore dia Gun metal Gate valve with iron wheel head screwed both ends for iron pipe or for union, complete all as specified and direced by Engr-in-Charge. |
| 48 | Supply and fixing in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete. |
| 49 | Supply and fixing in repair looking mirror of selected quality size 600mm x 450mm mounted on PVC/ Aluminium frame, fixed to wooden plugs with chromium plated brass screws, complete all as specified and direced by Engr-in-Charge. |
| 50 | Supply and fixing in repair tubular towel rail 20mm dia ‘D’ type 60 cm long between flanges of Aluminium anodised, complete all as specified and direced by Engr-in-Charge. |
| 51 | Supply and fixing in repair Vitreous China half stall urinals, (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)., complete all as specified and direced by Engr-in-Charge. |
| 52 | Supply and fixing in repair Waste coupling of PTMT suitable for urinals, (Minimum weight 32mm-45gms), complete all as specified and direced by Engr-in-Charge. |
| 53 | Supply and fixing in repair s/s Grating 100mm dia., complete all as specified and direced by Engr-in-Charge. |
| 54 | Supply and fixing in repair 75mm dia Cast iron Floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), complete all as specified and direced by Engr-in-Charge. |
| 55 | Supply and fixing in repair s/s Grating 75mm dia., complete all as specified and direced by Engr-in-Charge. |
| 56 | Supply and fixing in repair waste Pipe (32/40mmdia) suitable for urinals, Wash Basin and Sinks, complete all as specified and direced by Engr-in-Charge. |
| 57 | Supply and fixing in repair hand shower (Health Faucet) CP with inner flexible tube with wall hook, complete all as specified and direced by Engr-in-Charge. (Model No ALD-CHR-593 of Make Jaquar or equivalent model of Marc/Kohlar)\\". |
| 58 | Supply and fixing in repair plastic sheet covers for water tank, black,closed pattern, complete all as specified and direced by Engr-in-Charge. |
| 59 | Supply and fixing PVC (SWR) pipes 110mm bore, single socketed in any length with rubber ring joints fixed to walls including taking down old pipe, complete all as specified and direced by Engr-in-Charge. |
| 60 | Supply and fixing PVC (SWR) pipes 75mm bore, single socketed in any length with rubber ring joints fixed to walls including taking down old pipe, complete all as specified and direced by Engr-in-Charge. |
| 61 | Supply and fixing aluminium (powder coated with approved colour) ventilator, partially glazed and partially louvers, outer frame & mullion fabricated with alumimium section of size 82.50mm x 38.00mmx1.5mm thick (Cat No 20036), half portion glazed with 4mm thick frosted glass including rubber beading & glazing clip, half portion louvers of 80mm wide & 4mm thick frosted glass including alumimium louver patti including SS wire gauge of fixing of 0.36mm dia and 1.40 width of aperture with 25x3mm thick aluminium strip with screw to upper half portion of ventilator all fitting & fixture and fixed in position including taking down old ventilator, complete all as specified and direced by Engr-in-Charge. Note : Section Nos given above are of make Jindal, contractor may use similar setion of other make mention in PS. |
| 62 | Supply and fixing in position anodised aluminium powder coated (minimum thickness of powder coating 50 micron) door shutter with frame, partly glazed with 5mm thick tinted glass and partly panelled with 9mm thick prelaminated particle board with both side decorative laminated including rubber bead, joining cleat for fixing in position, aluminium door handle 150mm size, aluminium barrel tower bolt 200mm size etc including taking down of old frame with shutter of any size all as specified and directed. (a) Frame (top & side) section shall of size 101.60 x 44.75 x 2.4mm (Section No 14021)(b) Vertical members of shutter section shall be of size 85.00 x 44.45 x 2.00mm (Section No 19560)(c) Top members of shutter section shall be of size 83.50 x 44.45 x 2.00 mm (Section No 19596)(d) Lock rail (middle member ) of shutter section shall be of size 150.00 x 44.45 x 3.00 mm (Section No 19596)(e) Bottom member of shutter section shall be of size 150.00 x 44.45 x 3.10mm (Section 19584)(f) Glazing clip for securing glass of shutters shall be of 0.80mm thick (Section No 19370).Note : Section No given above are of make Jindal, contractor may use similar section of other make mention in PS |
| 63 | Supply and fixing in repair for 6 mm thick multiwall polycarbonate sheeting on roofing inncluding aluminium fillets at joint and aluminium angle (size 40x40x1.5 mm) at end, fixed with screw and all fitting and fixture, complete all as specified and direced by Engr-in-Charge. |
| 64 | Supply & Fixing Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding/view cutter to wall, fixed with self tapping screws, complete all as specified and direced by Engr-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysSep 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender