Tender For special Repair To Qtr No 10B, 20B And 26B Of Gaur Enclave & Provn Of Precast Rainwater Harvesting Pit With Precast Approach Drain In Rajiv Sandhu Vihar (Rsv) Under Ge (West) Lucknow.
Tender Value
47.60 Lakhs
Estimated cost
Bid Submission
01 Oct 2026
20 days left
EMD
95200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Qtr No 10B, 20B And 26B Of Gaur Enclave & Provn Of Precast Rainwater Harvesting Pit With Precast Approach Drain In Rajiv Sandhu Vihar (Rsv) Under Ge (West) Lucknow.
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GE (WEST ) Lucknow Name of Work : Spl repair to qtr no 10B, 20B and 26B of Gaur Enclave & Provn of Precast Rainwater Harvesting PIT with Precast Approach Drain in Rajiv Sandhu Vihar (RSV) under GE (WEST) Lucknow. Contract No: GE/W/LKO/T-76 OF 2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words 8.0 |
| 2 | M & L for Brickwork with fly ash old size bricks, straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete incl demolition of brick work complete all as specified and directed. |
| 3 | Repair to plaster by using readymix mixture of thickness 12 mm to 15 mm and taking down cement or cement lime plaster, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete all as specified and directed. |
| 4 | Repair to plaster by using readymix mixture of thickness 5 mm to 7 mm in ceiling including taking down cement or cement lime plaster, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, complete all as specified and directed. |
| 5 | M&L for cleaning of all loose dirt and dust from roof surfaces and applying roof treatment as under :- (a) Remooved damage structure protection plaster should be cleaned first of all, the dust and loose materials. (b) Surfaces must be clean and sound. Remove all oil, dirt, and loose part, laitance and other contaminants preferably by thorough mechanical wire brushing or water blasting for proper cleaning the surface(c) Put or insert a nozzal in DPC for Nozzal Injection Grouting (d) After drying surface and nozzal we are inject the a solution of product mix of Zycosil+ and Zycoprime + and water with the ratio of 1:2:20 at a saturation stage (e) After inject of solution agai we are Seal the all hole of pipes and the joints of surface with elastomix putty or GP 2 Every care should be taken to cover the entire circumference cavity of the core and pipe to seal.(f) After drying the surface we applied the 2 or 3 coat of polymer (SBR Latex ultra tech) with ratio of 1:1(polymer and water)(g) Make a plaster for protection on wall with mix polymer by Sand. and cement complete all as specified and directed. |
| 6 | M&L for rendering/plaster by using readymix mixture of thickness 12 mm to 15 mm on newly prepared surface and plastering the wall surface with white cement based polymer modified self curing mortar, complete all as specified and directed. |
| 7 | M & L for preparation of old treated surfaces of walls and applying two coats of smooth acrylic emulsion with rich matt finish having VOC less the 50 grms per ltr complying leed criteria @ 1 Ltr (undiluted)/10 Sqm diluted with water in 50-55% applied over priming coat with fully automatic airless spray machine of paint application having an electric motor of min 1 HP with a flow speed of min 1 ltr per minute having a presure of 3300 PSI, then allow 6-8 hrs to dry the the surface in both the coats of paint as per manufacturer instruction complete over one coat of acrylic water based interior grade primer @ 0.80 ltr (undiluted)/10 Sqm diluted with water in 100% ratio to be applied with fully automatic airless spray machine of paint application having an electric motor of min 1 HP with a flow speed of min 1 ltr per minutes having a pressure of 3300 PSI and allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed. |
| 8 | M & L for preparation of old treated surface of ceiling and applying two coats of oil bound distemper incl cleaning the old surface and removing the dust from the wall complete all as specified and directed. |
| 9 | M&L for premium quality joint free non skid ceramic tiles, coloured, any shade superior quality, 7 to 8mm thick, (square/ rectangular), area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 incl dismantling of existing tiles complete all as specified and directed. |
| 10 | M&L for joint free glazed coloured GLOSSY tiles, superior quality of size 300 x 450 x 7mm thick/300 x 600 x 7mm thick, in vertical surfaces etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 and dismantling of existing tiles complete all as specified and directed. |
| 11 | M&F for Vitrified Ceramic tiles dark shade 8-10 mm thick (square/ rectagular) polished,area of each tiles not exceeding 0.36 sqm , in floors/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tile over screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 including dismantling of existing tiles complete all as specified and directed. |
| 12 | M&L Granite 18- 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm thick screed in CM 1:4 including dismantling of existing stone slabs etc complete all as specified and directed. |
| 13 | Drilling through holes in granite stone for pipes etc not exc. 25 mm dia complete all as specified and directed. |
| 14 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations etc complete all as specified and directed. |
| 15 | Material and labour for GI tubing 15mm dia medium grade galvanised with all fittings fixed to wall and in floor incl Taking down steel tubing and connection 15mm bore complete all as specified and directed. |
| 16 | Material and labour for GI tubing 20mm dia medium grade galvanised with all fittings fixed to wall and in floor incl Taking down steel tubing and connection 15mm bore complete all as specified and directed. |
| 17 | Material and labour for cutting and chaseing in brick wall for concealed GI tubing and making good in CM 1:4 n.exc 10 cm in girth complete all as specified and directed. |
| 18 | S & F PVC (SWR) Pipes 110mm bore single socketed in any length with rubber ring joints , fixed on walls in trenches or in floors incl Taking down rain water pipes (any size or pattern), including all neccessary fittings complete all as specified and directed. |
| 19 | S & F PVC (SWR) Pipes 75mm bore single socketed in any length with rubber ring joints , fixed on walls in trenches or in floors incl Taking down rain water pipes (any size or pattern), including all neccessary fittings complete all as specified and directed. |
| 20 | S & F in repair cast iron (CI)100 mm dia Nahani trap to waste pipe fixed in cement concrete complete all as specified and directed. |
| 21 | S&F powder coating anodized aluminium glazed ventilator ,Half fixed type and half fixed glass louevers with aluminium sections weighing not less than 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws and including dismantling of existing ventilator complete all as specified |
| 22 | Supply and fixed in repairs vitreous china wash hand basin white flat back size 550x400mm incl 02 Nos angle iron bracket 40x40x5mm bracket CP waste coupling,and 32mm dia PVC waste pipe, complete all as specified and directed. |
| 23 | S & F in repair vitreous china wash down water closet (pedestal pattern) pan white with “P” trap including connection to drain or outgoing pipe and to syphonage pipe complete all as specified and directed. |
| 24 | Supply and Fixing in repair vitreous china squatting pan, Orissa pattern, long pan size 580 x 440mm with 'P' trap with integral foot rest & fixing incl making good floor to match complete all as specified and directed. |
| 25 | S & F in repair 10 ltrs capacity PVC valveless syphonic action type flushing cistern, low level white with inlet ball valve, float and handle including brackets complete all as specified and directed. |
| 26 | S & F in repair 15mm bore PVC connection 450mm long with brass/PVC coupling and washer complete all as specified and directed. |
| 27 | S & F in repair 15 mm bore CP brass Central Hole wash hand Basin mixer fixed to GI pipe with long braided hose complete all as specified and directed. |
| 28 | S & F in repair fancy type brass chromium plated Wall Mixer 3 in 1 system for mixing hot and cold water, connecting legs wall flange with provision of both hand shower and overhead shower complete with 115mm long bend pipe complete all as specified and directed. |
| 29 | S & F in repair for 15mm bore CP single lever Sink mixer for Kitchen sink mixer without popup waste system with 450mm long braided hoses complete all as specified and directed. |
| 30 | S & F in repair for CP bib taps 15mm fancy type Chromium Plated cast copper alloy with crutch or butterfly handle complete all as specified and directed. |
| 31 | S & F in repair Angle valve cast copper alloy with capstan head chromium plated screwed down high pressure with long shanks and fly nuts screwed for 15mm bore pipe complete all as specified and directed. |
| 32 | S & F in repair CP shower rose fancy type 125mm size with or without swivel joints any size including fixed to steel pipe or union complete all as specified and directed. |
| 33 | S & F in repair CP brass soap dish fancy type of one soap fixed with screw to wall complete all as specified and directed. |
| 34 | S & F in repair Gun-metal, globe or gate valves 20mm with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. |
| 35 | S & F in repair for hand shower (Health faucet) with 1 Mtr flexible tube with wall hook bracket etc,complete all as specified and directed. |
| 36 | S & F in repair CP Brass toilet paper holder with wall hook bracket etc, complete set of superior quality complete all as specified and directed. |
| 37 | S & F in repair CP Brass Tabular Towel Rail, 12mm dia D type 60cm long between flanges complete set of superior quality all as specified and directed. |
| 38 | S & F in repair PVC coloured bath cabinet, overall size 560 x 410mm decorative design with looking mirror including all fittings complete all as specified and directed. |
| 39 | S & F in repair looking mirror fancy type decorative pattern with selected quality glass 5.5mm thick with chromium plated brass screws and cup washers or brass CP studs complete all as specified and directed. |
| 40 | S & F in repair Glass corner self, fancy type, 250x250 and 10mm thick fixed with brass bracket and screwed complete all as specified and directed. |
| 41 | S & F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket, guard and railing 60cm long complete all as specified and directed. |
| 42 | S & F in repair 300mm long Stainless steel six peg hanger chromium plated complete all as specified and directed. |
| 43 | S & F in repair sink with drainage board size 1145x510 mm,bowl size 560x410x200 mm made of stainless steel 1.00mm thick kitchen or laboratory with plugs, washers and wastes pipe & coupling etc including bedding including cement mortar, dwarf wall or cantilever brackets and connection union to pipe complete all as specified and directed. |
| 44 | S & F in repair stainless steel kitchen plate rack made out of 0.63mm thick stainless steel of size 900x750 mm including screws and wt not less than 5.00 Kg complete all as specified and directed. |
| 45 | S & F for rotational moulded double layered polyethylene water storage tank cylindrical, hoisted & fixed in position all as specified capacity 500 ltrs incl Dismantling water tanks of capacity exc 250 & n exc 500 ltr complete all as specified and directed. |
| 46 | S & F for rotational moulded double layered polyethylene water storage tank cylindrical, hoisted & fixed in position all as specified capacity 1000 ltrs Dismantling water tanks of capacity exc 500 & n exc 1000 ltr complete all as specified and directed. |
| 47 | S & F 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball & fixed complete all as specified and directed. |
| 48 | Taking down chowkhat frame with shutter (without taking out shutter from the frame) n exc 1.50 Sqm and removing from sites complete all as specified and directed. |
| 49 | Taking down chowkhat with shutter (without taking off shutter from the frame) area exc 1.5 sqm but n.exc 4 sqm each complete all as specified and directed. |
| 50 | Taking down shutter only of any description exc 1 sqm n. exc 2 sqm each and removing to store complete all as specified and directed. |
| 51 | Material and labour for Cutting holes exc half brick but n.exc one brick in brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed. |
| 52 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of frame size 65x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant complete all as specified and directed. NOTE : The work for fixing of WPC door/window shall include the following and the rates quoted by the bidder shall include the same:-(i) The work pertaining to WPC door/window shall be executed by the contractor as per MoU from authorised technician(carpenter) through manufacturer. (ii) The contractor shall upload with the documents under Cover-I \\"Memorandum of Understanding: (MoU) with Rs 100/- Stamp paper at least one manufacturers, failing which the bid shall be liable to be rejected. |
| 53 | S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face)& 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. NOTE : The work for fixing of WPC door/window shall include the following and the rates quoted by the bidder shall include the same:-(i) The work pertaining to WPC doorshall be executed by the contractor as per MoU from authorised technician(carpenter) through manufacturer. (ii) The contractor shall upload with the documents under Cover-I \\"Memorandum of Understanding: (MoU) with Rs 100/- Stamp paper at least one manufacturers, failing which the bid shall be liable to be rejected.. |
| 54 | S & F 35mm thick factory made single extruded WPC (Wood Polymer Composite) solid glazed and skelton door shutter open rebated,prepared to receive glass, gauze etc,without shash bar edge of framing plain, chamfered or rounded, fitted with cut or mitred beads for securing glass, gauge etc comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.(Note: Mild steel butt hinges shall be paid separately) NOTE : The work for fixing of WPC door shall include the following and the rates quoted by the bidder shall include the same:-(i) The work pertaining to WPC door shall be executed by the contractor as per MoU from authorised technician(carpenter) through manufacturer. (ii) The contractor shall upload with the documents under Cover-I \\"Memorandum of Understanding: (MoU) with Rs 100/- Stamp paper at least one manufacturers, failing which the bid shall be liable to be rejected. |
| 55 | Providing and fixing Double rebate windows & ventilators made of High-performance factory-made system Aluminium windows with Akzonobel powder coating of 60-70 microns (Any RAL Colour). Section for Outer frame should be of 91mm x35mm, Glass shutter frame shall be of 54mm x 30mm, Mesh shutter frame shall be of 54mm x 30mm, 5mm thick Single Glazed beading shall be of 15mm x 18mm.5mm thick ClearGlass shall be used in all the windows & ventilators. Stainless Steel Wire Mesh shall be used in Wire mesh Shutters. 10mm Sq bar M.S. Grill/Guard bar with 150mm c/c shall be fixed in between glass & mesh shutter. All frame corners shall be joined/assembled using self-locating corner cleats (No screwing at corners shall be allowed). All Hardware shall be used from a reputed brand, weather silicon shall be used for filling the gap between window opening & window Frame complete all as specified and directed. NOTE : The work for fixing of aluminium window & ventilator shall include the following and the rates quoted by the bidder shall include the same:-(i) The work pertaining to aluminium window & ventilator shall be executed by the contractor as per MoU from authorised technician(carpenter) through manufacturer. (ii) The contractor shall upload with the documents under Cover-I \\"Memorandum of Understanding: (MoU) with Rs 100/- Stamp paper at least one manufacturers, failing which the bid shall be liable to be rejected. |
| 56 | S & F 200mm long alumunium anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 57 | S & F Mild steel Butt hinges \\"medium weight\\" cold rolled mild steel 100mm size complete all as specified and directed. |
| 58 | S & F alumunium handle fabricated type anodised 150mm long complete all as specified and directed. |
| 59 | S & F aluminum alloy anodized sliding door bolt 300mm long with hasp and staple (bolt type) and fixing clip of sheet and cast in extruded section and fixing bolts and sliding bolt of extruded section complete all as specified. |
| 60 | S&F in repair factory made WPC single extruded 100% lead free ISO certified board of 18mm thick bothside pre laminated shutter for KITCHEN cupboard, Room Cupboard and bathroom cupboard. The laminated shutter should be .12-.14 microne pre laminated side with laminated color and other side same laminated color of density not less than 650 kg / cum manufactured by an ISO 9001:2015 certified company. All the edges shall be covered with 2 mm thick edge moulding tape or 90 degree edge bend finish. The 18mm board should be 100% lead free, water proof, termite proof and borer proof and should have good screw holding capacity and complete all as specified and directed. NOTE : The work for fixing of WPC cabinet & cupboard shall include the following and the rates quoted by the bidder shall include the same:-(i) The work pertaining to WPC cabinet & cupboard shall be executed by the contractor as per MoU from authorised technician(carpenter) through manufacturer. (ii) The contractor shall upload with the documents under Cover-I \\"Memorandum of Understanding: (MoU) with Rs 100/- Stamp paper at least one manufacturers, failing which the bid shall be liable to be rejected. |
| 61 | S & F Continuous (piano) hinges of size of flap 30mm mild steel, bright finish or elecrogalvanised fixed with screw to timber frame work complete all as specified and directed. |
| 62 | S & F 100mm size fancy type aluminium handle fabricated type anodised complete all as specified and directed. |
| 63 | S & F 100mm size aluminium anodised hasp and staple, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 64 | S & F heavy duty CP mild steel hanging rod 18 mm dia with end brackets and fixed with screw complete all as specified and as directed. |
| 65 | S & F in repair fancy type stainless steel curtain rods of 25mm dia of approved shade including bracket/lattoos/wall to wall complete all as specified and as directed. |
| 66 | S & F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4 mm fixed with stainless steel wire staples or with necessary beads complete all as specified and directed. |
| 67 | S & F 300mm MS ordinary rat tail pattern spring including roller & roller plate complete all as specified and directed. |
| 68 | Material and labour for preparation of new wood or wood based surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primercomplete all as specified and directed. |
| 69 | M & L for 50 mm thick cement concrete 1:3:6 type C1 (using 20mm graded stone aggrtegate) as in plinth protection including finsihing even & fair and incl demolition of existing cement concrete complete all as specified directed. |
| 70 | M & L for 75 mm thick Cement concrete 1:4:8, type D-2 (using 40mm graded stone aggregate) as in sub base etc and incl demolition of existing cement concrete complete all as specified directed. |
| 71 | Demolition of Cement Concrete (Unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 72 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and directed. |
| 73 | Returning, filling soil including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed. |
| 74 | Removing excavated soil n exc. 250m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed. |
| 75 | M & L for Cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) in foundation filling and mass concrete complete all as specified and directed. |
| 76 | S & F in repair suspended false ceiling with \\"E\\" grid suspended ceiling grid system of grid size 600 x 600mm with GI frame work of main runner 38 x 24mm sheet thickness 0.4mm, cross tee 28 x 24mm sheet thickness 0.3mm and wall angle 24 x 24 x 0.3mm using 4mm thick high pressure steam cured classic variant E-Board, designer pattern to be placed in the grid suspended by 2mm dia GI wire at distance n. exc 1.2m center to center with butterfly clips including preparation of surface and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed. |
| 77 | M & L for 100mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base etc and incl demolition of existing cement concrete complete all as specified directed. |
| 78 | M&L for sand filling under floors as in coushoning for interlocking paver blocks complete all as specified and directed. |
| 79 | M&L in repair in repair for factory made machine pressed precast 80mm thick PCC inter locking paver blocks M-40 grade of any shape and size confirming to IS-15658-2006 as in hard standing with grey cement and pigment complete all as specified and directed: |
| 80 | M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate )as in haunching, kerb/fillets including necessary excavation earth work all as specified and directed. |
| 81 | Excavation in post holes in (or similar holes) each n.exc 0.5 cum, getting out in any type of soil, returning, filling in and ramming earth or broken bubble mixed with earth arround in layers n.exc 25 cm thick and removal of surplus soil compleate all as specified. |
| 82 | S&F in repair for MS steel work as in rectangular purlins, rafters and similar item complete including cutting, griding, welding etc as required (F290 Gde E-165) complete all as specified and directed. |
| 83 | S&F in repair rolled mild steel in joist, channel, angle or tee sections, circular tubes fixed independently as in post, pillars stanchions etc (FE-290 Gde E165) complete including cutting grinding welding etc as required complete all as specified and as directed. |
| 84 | S&F in repair Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws complete all as specified and directed. |
| 85 | S & F in repair CP grating doom 120mm dia with/without hole minimum weight 42gms complete all as specified and directed.. |
| 86 | M&L for preparation of new steel surface of any description exceeding 1cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 87 | S & F in repairs vitreous china squatting pan (Orissa pattern) water closet (white) of size 580x440mm with integral foot rests, 'P' or 'S' trap, including connection to trap and flushing pipe, antisyphonage pipe etc including provision of PCC (1:5:10) type E2 in filling, making good to floor, complete all as specified and directed. |
| 88 | M & L for preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper (OBD) of approved shade/tint over a coat of Priming complete, all as specified & directed. |
| 89 | M & L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint of approved shade/tint complete all as specified and directed. |
| 90 | M & L preparation of new surfaces of of ceiling and applying two coat of white wash on ceiling complete all as specified and directed. |
| 91 | Excavating over areas, n exc 1.5 m deep and getting out in soft/loose soil complete all as specified. |
| 92 | Excavating over areas, exc 1.5 m deep and not exc 3.0 m deep and getting out in soft/loose soil complete all as specified. |
| 93 | Supply and filling coarse sand in bottom of recharge chamber 1.5 to 2mm size complete all as per existing site specified and directed. |
| 94 | Supply and filling/topping up coarse aggregate 40 mm as screening material complete all as specified and direcetd. |
| 95 | Supply and filling/topping up coarse aggregate 20 mm as screening material complete all as specified and direcetd. |
| 96 | Supplying and packing pea gravel of size 3.00 mm to 6.00 mm around casing pipe complete all as specified and directed. |
| 97 | Drilling not less than 250 mm bore hole by DTH method to any depth below the ground level in any kind of rock/soil upto 60 mtr deep including disposal of surplus soil to a distance not exc 50 mtr away complete all as specified and directed.Note : 1) In case of incountering rock prior to 30 mtr depth from ground level the decission of the Garrison Engineer for reboring shall be final and binding. Specific order in writing shall be issued by Garrison Engineer for reboring and the quantities shall vary accordingly.2) cost of transportation of DTH plant is included in the unit rate. |
| 98 | M&L for 200 mm internal dia UPVC casing pipe conforming to IS-4985-2000 with minimum pressure rating 8.0 Kg/Sqcm in 6.00 mtr length with male and female end with all necessary fittings including joiting and jointing materials all as specified and directed. |
| 99 | M&L for 200 mm internal dia UPVC slotted pipe conforming to IS-4985-2000 with minimum pressure rating of 8.0 Kg/Sqcm having 3mm slots in 2.44 to 3.85 mtr length with male and female end with all necessary fittings including joiting and jointing materials all as specified and directed. |
| 100 | M&L for development of bore well of any bore/ capacity and size not less than 30 mtr deep at the pressure not less than 6Kgs/Sq Cm by diesel engine driven air compressor of capacity 450 CFM including air pipe, transports and connected items for desired flow of rain water into ground all complete all as specified and directed. |
| 101 | Material and labour for fabrication, welding and fixing of MS works of any sizes of angles irons/flat iron/MS sheet works for valve pit cover, ladder, Sump Manhole Cover, Grills and stair steps etc including painting two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 102 | M&L for 100 mm internal dia UPVC pipe having with male and female end with all necessary fittings including joiting and jointing materials all as specified and directed. |
| 103 | M & L for brick work (using old size brick) conforming to IS-12894:2002, Non Modular, class designation 7.5, straight or curved on plan, exc 6.0 m mean radius, built in CM (1:4) complete all as specified and directed. |
| 104 | M&L plain cement concrete type 1:2:4 B1 (using stone 20mm graded aggregate) as in benching,copings etc, including necessary form work and incl demolitiom of existing complete all as specified and as directed |
| 105 | M&L for RCC Design mix M-25 as in floors, roofs, landings, deck slabs and in shelves complete all as specified and directed. |
| 106 | M&L for RCC Design mix M-25 as inBeams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. |
| 107 | Formwork to edges of concrete flats treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm width rough finished surface of concrete complete all as specified and directed. |
| 108 | M&L for flat Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed. |
| 109 | M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 110 | Ditto all as per item 108 above, but 6 mm to 8 mm dia as in stirrups, complete all as specified and directed. |
| 111 | S&F of precast U-shaped drain (Without LID cover) of size 450mm (Width)x600 mm (Depth) (from inner side of drain)x2000 mm length and 610 mm (width)x680 mm (depth) from outer side of drain) made with FE 500/550D grade TMT steel reinforcement bars in each unit which is made of high performace self compacting concrete (SCC) of M-40 grade ,cured under controlled factory conditions through steam curing ,having loading capacity of 5kn/Sqm with cover( light motor vehicle loading).All manufacturing process must comply with indian standards.The curing process must be maintained using RO water and chillar plant for quality assurance.The formwork used for casting should be made automobile grade water tight steel enabling production of highly accurate and consistent components.consrete mix design of IS:9103 with weight of each drain unit 9Without lid cover) atlest 560 kg (Tolerance limit 3%) complete all as specified and directed. Note:- (i) The work pertaining to precast shall be executed by the contractor as per MoU from authorised technician through manufacturer of the precast factory. The sample of MoU is enclosed as per Appx 'B'. The contractor is advised quote their rate accordingly.(ii) The contractor shall upload with the documents under Cover-I \\"Memorandum of Understanding: (MoU) with Rs 100/- Stamp paper at least one manufacturers, failing which the bid shall be liable to be rejected. |
| 112 | Taking down carefully surface aluminium or copper point wiring (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling roses, regulators, sockets etc and making good disturbed surfaces even and smooth using CM 1:3 including white/colour wash to match the existing surface complete all as specified and directed. |
| 113 | M&L for point wiring with 1100 Volts grade PVC insulated FRLS multi-stranded copper conductor cable 1.5 sqmm including PVC insulated FRLS copper earth continuity conductor 1.5 sqmm, colour-coded as per IS, drawn through and including concealed rigid non-metallic PVC conduit, medium grade, ISI marked, ivory colour of size not less than 25 mm dia with all necessary conduit fittings and accessories such as bends, tees, couplers, junction boxes etc including concealed sunken modular GI metal box of minimum 1.0 mm thickness with approved colour modular mounting polycarbonate front plate and ABS under plate with CRCA metal frame and zinc-plated steel screws suitable for mounting modular switches, sockets, regulators etc complete for the following:– (a) One light or one fan point controlled by one switch. |
| 114 | All as item No 112 above but one bell/ buzzer point controlled by one bell push complete all as specified and directed |
| 115 | All as item No 112 above but one socket outlet 6 Amp controlled by one switch on the same board with other switches complete all as specified and directed |
| 116 | All as item No 112 above but one socket outlet 6 Amp controlled by one switch on indepdendent board complete all as specified and directed |
| 117 | M&L for point wiring with 1100 Volts grade PVC insulated FRLS multi-stranded copper conductor cable 2.5 sqmm, including PVC insulated FRLS copper earth continuity conductor 2.5 sqmm, colour-coded as per IS, drawn through and including concealed rigid non-metallic PVC conduit, medium grade, ISI marked, ivory colour, of size not less than 25 mm dia, with all necessary conduit fittings and fixing accessories, including sunken GI metal box of minimum 1.0 mm thickness with approved colour modular mounting polycarbonate front plate and ABS under plate with CRCA metal frame and zinc-plated steel screws suitable for mounting modular accessories, complete for one 6A or 16 A socket outlet point controlled by one switch on independent board complete all as specified and directed.. |
| 118 | S&F angle type holder insulated of approved make with insulated polycorbonate body with modular frame including necessary fixing accessories and electrical connections complete all as specified and directed.. |
| 119 | S&F Modular switch 1 way 10A, 1 module size of approved make ,with all necessary fixing and electrical connections complete all as specified and directed. |
| 120 | S&F Modular switch 1 way 16A, 1 modulesize of approved make ,with all necessary fixing and electrical connections complete all as specified and directed.. |
| 121 | S&F Modular door Bell push 6A 1 module size of approved make ,with all necessary fixing and electrical connections complete all as specified and directed. |
| 122 | S&F modular Socket, 6A - 2/3 pin combined 2 module of approved make ,with all necessary fixing and electrical connections complete all as specified and directed. |
| 123 | S&F modular Socket 6A/16A - 2/3 pin combined 2 module of approved make ,with all necessary fixing and electrical connections complete all as specified and directed. |
| 124 | S&F ceiling rose, three terminals with insulated of approved make with all necessary fixing accessories and electrical connection complete all as specified and directed. |
| 125 | S&F in repairs LED bulkhead fitting 9 watt IP 66 & IK 09 with polycarbonate body duly prewired connection with 0.75 sqmm PVC insulated & sheathed three core flexible multi stranded copper conductor cable as complete all as specified and directed. |
| 126 | S&F in renewal LED surface mounted batten 9/10 watt, powder coated die cast/ extruded aluminium body (Thickness ≥ 1.20 mm) or CRCA sheet body (Thickness ≥ 0.50 mm) and construction as per IS:10322 with driver (Replaceable) as per the requirement with Driver efficiency >85%, System lumen efficacy 120 lm/Watt output, operating voltage AC 140-270 volt, 50 Hz, operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10% , P. F.≥0.95, IP 20, CRI >80, Flicker free, (flicker should be below 5%), life time (LED & electrical circuitary) of minimum 50000 burning hours with 70% of initial Lumen maintained till life ends, CCT 5700°K /6000°K/6500°K (As per ANSI Bin), SDCM (Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and fixture shall be of relevant BIS standard and trade mark certificate (TC). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect including connections with suitable size FRLS, PVC insulated copper conductor cable and earthing etc as required with Minimum 5 year OEM warranty. LM79 & LM80 Test report from NABL lab for all tests required for LED fixtures as BIS shall be submitte complete all as specified and directed.. |
| 127 | M&L for sub main wiring with two single core PVC insulated FRLS cable 4.0 sq mm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 4.0 sqmm stranded copper conductor earth continuity FRLS cable drawn through non metallic rigid PVC conduit 20mm dia including all conduit and fixing accessaries concealed in wall including cutting chases in wall and making good disturbed surface to match of walls /ceiling complete including taking down old sub main wiring. (Note-The cost of PVC pipe and accessories shall be deemed to be included in the quoted rate) complete all as specified and directed. |
| 128 | M&L for sub main wiring with two single core PVC insulated FRLS cable 6.0 sq mm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 6.0 sqmm stranded copper conductor earth continuity FRLS cable drawn through non metallic rigid PVC conduit 20mm dia including all conduit and fixing accessaries concealed in wall including cutting chases in wall and making good disturbed surface to match of walls /ceiling complete including taking down old sub main wiring. (Note-The cost of PVC pipe and accessories shall be deemed to be included in the quoted rate) complete all as specified and directed. |
| 129 | S&F MCB distribution board factroy-assembled type, fabricated from powder coated, CRCA steel sheet, degree of protection IP-43, IK 09 with reversible double door to conforming to IS 61439 (low voltage switchgear and controlgear assemblies),provided with insulated tinned copper busbar of 100 Amp rating , complete with all internal connections , earthing connections,and blanking plates for all unused ways/spaces complete in all respects, suitable for the following ratings and number of ways:- (a) MCB SPN, 240 volts, 8 ways complete all as specified and as complete all as specified and directed. |
| 130 | All as item No 128 above but MCB SPN, 240 volts, 12 ways complete all as specified and directed |
| 131 | S&F of MCB SP 240 volts, C Curve of 06 to 32 Amps, 10 KA Current carraying capacity complete all as specified and directed. |
| 132 | S&F of MCB SPN 240 volts, C Curve of 32 Amps, 10 KA Current carraying capacity complete all as specified and directed. |
| 133 | S&F exhaust fan, steel body AC single phase, 230 V with blades, frame and louvers of following sweep:-300mm complete all as specified and directed.. |
| 134 | S&F exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200 or more copper winding of following size:-250 mm complete all as specified and directed. |
| 135 | Taking down carefully ceiling/Exhaust fan of any size and type and refixing on same or new location after oiling, greasing, Painting complete all as specified and directed. |
| 136 | S&F LED surface mounted batten light fitting 20/22 W, powder coated die cast/ extruded aluminium or CRCA sheet phosphated and powder coated body construction confirming to IS:10322 (part-I) / IEC 60598-1 with Replaceable high efficiency electronic driver (diver efficiency >85%,) System lumen efficiency >120 lm/Watt suitable for AC 140-270 Volt, 50 Hz, operating temp range -15 deg to 40 deg. The luminarie shall be provided with internal surge protection of 2.5 KV with Short & Open circuit protection, CRI >80, Flicker <5%, the LED shall be have minimum rated life 50000 burning hours with 70% Lumen maintained till life ends, the CCT shall be 5700°K /6000°K/6500°K (ANSI Bin), SDCM (Standard Deviation Color Matching) <3, Maximum power consumption shall not exeed rated wattage the luminarie shall confirm to relevant BIS standard and bear a valid BIS trade mark certificate (TC). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing the item inclued internal wiring with suitable size FRLS, PVC insulated copper conductor cable all connection earthing, fixing accessories and is complete in all respect with Minimum 5 year OEM warranty. LM79 & LM80 Test report from NABL lab for all tests required for LED fixtures as BIS shall be submitted. |
| 137 | S&F door bell, AC, 240 volts, single pole of approved make ,with all necessary fixing and electrical connections complete all as specified and directed. |
| 138 | Taking down DBs any type and size including MCBs/MCCBs removing materials to store for keeping in safe custody or taking credit and making good the disturbed surfaces of walls, floors, etc complete all as specified and directed. |
| 139 | Supply and fixing LED lamp 9 watt complete all as specified and directed. |
| 140 | S&F 45W Pressure die cast aluminium housing street light with system lumen of 6300 lm and system efficacy of 140 lm/w, IP-66,IK-10 single piece die cast incl spigot, dia 48-76mm,LED lifetime (L70B50) 75000 buring Hrs with integrated optical cover. Street light should have standalone lighting control system with AUTO ON/OFF based on DUSK/DAWN timings,preset time settings with monthly variations (Jan to Dec), inbuilt real time clock for switching, incleds dimming profile for energy savings,drift not exceedind max 2mins/year, clock retention upto five yeras, auto switching off secondary power for module,dimmable driver based on PWM control, dim to off with high/low voltage cut off with 440V protection for 8 hrs for complete luminiarie incl driver and astro module,surge protection as per IEC 61000-4-5 complete potted driver and fitting should be same make and LM80, LM79 report require and BIS separate driver and luminaries complete all as specified and directed. |
| 141 | S&F Modular AC BOX Power unit with Socket Plug top and MCBs with Single pole and neutral enclosure with a two pin and one pin for earth plug and socket complete with one single pole MCB 25 Amp 'C' curve with all necessary internal wiring connection and fixing arangement complete all as specified and directed. |
| 142 | Taking down carefully geyser of any type and refixing the serviceable geyser in its original or new location complete all as specified and directed. |
| 143 | S& F in repair Decorative wall light fixture made up of Metal base, synthetic white in colour and square/round metal base with bend pipe and glass globe with nickel finish, ( B-22/E27 base), with 01 No. 12 W LED Bulb, 230 V, 6000K, complete incl all required electrical connecting arrangements complete all as specified and directed. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysOct 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender