Tender For Special Repair To Bldg No T-279 At 4016 Fd Hospital Under Age (I) Bhalra (Nit No. 80 Of 2026-27)
Tender Value
9.70 Lakhs
Estimated cost
Bid Submission
01 Oct 2026
18 days left
EMD
19408
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nagrota → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Bldg No T-279 At 4016 Fd Hospital Under Age (I) Bhalra (Nit No. 80 Of 2026-27)
BOQ
| Sl. No. | Item Description |
| 1 | Dismanting CGI (corrugated or semicorrugated etc) sheets in roof covering. |
| 2 | Dismantling wrought iron or mild steel work of any description not otherwise provided for |
| 3 | Dismantling framed trusses of span n exc 10m. |
| 4 | Demolition of brick work built in cement mortar including all quions, arches, pillars etc but excluding ashlar facings dressed stone work and precast concrete articles. |
| 5 | Dismantling boarding any description fixed in any position with nail including GI frame work complete all as directed. |
| 6 | Taking down cement plaster of any description on brick or stone walls or from concrete surface incl racking out joints hacking for key scrubbing with water etc all as specified. |
| 7 | Taking down chowkats or frames with shutter w/o taking off shutter from the frame n.exc 1.5 sqm each incl cutting holes for taking out hold fast or dismantling brick (holes cut and any other damage to jambs, wall for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt) all as specified and directed. |
| 8 | Taking down chowkats or frames with shutter w/o taking off shutter from the frame exc 1.5 sqm but n.exc 4 sqm each incl cutting holes for taking out hold fast or dismantling brick (holes cut and any other damage to jambs, wall for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt) all as specified and directed. |
| 9 | Dismantling floors hearth or wall tilling including cement mortor bedding (but not backing) removing serviceble tiles to store and rubbish off the premises. |
| 10 | Dismantling stone slabs and tiles of any description or thick ness in floors laid bedded and pointed in any mortar. |
| 11 | Demolition of cement concrete (unreinforced) in ground floors and paving's n.exc 15 cm thickness (below or above ground level) and removing unserviceable material exc 100 mtr as specified. |
| 12 | M&L for 40 mm thick plain cement concrete 1:2:4 type B-1 (using 25 mm graded stone aggregate) as in sub bases of floors rough finished . |
| 13 | Demolition of cement concrete (Reinforced) of any description and any position not other wise specifically provided reinforcement cut as required to facilitate demoltion. |
| 14 | M & L for formwork fair and finished surfaces to sides and soffits of floor or roof beam, beam hauchings, bands, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc complete all as specified and directed |
| 15 | M&L Reinforced Cement Concrete Type B1 1:2:4 (20 mm graded stone aggr) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed |
| 16 | M & L Reinforced cement concrete (nominal mix) in Type B1 1:2:4 (20mm graded crushed stone aggregate)Beams, cantilevers, bressummers, lintels over 1.5m span ,as in lintel band. |
| 17 | M & L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, lintels, cantilevers, shelves, including supports , overhangs etc also splays between floors and beams etc as specified and direced. |
| 18 | M & L high strength steel deformed TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping columns,hookings ends and binding with mild steel wire (annealed) not less than 0.90 mm dia or securing with clips, etc complete all as specified and directed. |
| 19 | Ditto' all as per Item above but 5mm dia and over upto and incl 10 mm dia as in Binders,stirrups,spacer all as specified. |
| 20 | M & L for Granite (of any type) work (table rubbed & polished) in steps, jambs, pillars, window-cills cooking platforms & like including pointing into white cement (1:2) using marble dust with admixture of pigment to match shade of granite laid over and including Screed bed or bedding layer of mortar 15mm thick for laying floor in CM 1:4 finished even & rough to receive top layer including rounding/bull nose to expose edge , complete all as specified and directed. |
| 21 | S&F for structural steel works of Fe 410W (Gde E 250) quality A, as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. including painted one shop coat of zinc chromate/red oxide primer paint (including preparation of surface) before fabrication as directed. |
| 22 | S & F Plates (plain or chequered channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment. |
| 23 | M&L for mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 22.5cm and n exc 30cm long, Diameter of neck 16mm to 20mm all as specified.Make:- Conforming to IS |
| 24 | Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 25 | Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 26 | M&L for Brickwork with Bricks (old size), straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6 complete all as specified. |
| 27 | S&F Pressed steel frames for door (Factory made) out of 1.25 mm thick black MS sheet, with one or more rebates including necessary fixing lugs, butt hinges, lock strike plate, etc. complete, size of frame 105x60mm incl bottom of each chowkat to be welded with 2 Nos 25x25x3 mm thick flat iron projecting 10 cm on either side and back fill to chowkats with PCC 1:3:6 type C0 using 12.5 mm graded crushed stone aggregate including one shop coat of red oxide primer complete all as specified and directed. Note: PCC 1:3:6 type C-O as in backfill will be paid separately. |
| 28 | S&F Pressed steel frames for door (Factory made) out of 1.25 mm thick black MS sheet, with one or more rebates including necessary fixing lugs, butt hinges, lock strike plate, etc. complete, size of frame 125x60mm incl bottom of each chowkat to be welded with 2 Nos 25x25x3 mm thick flat iron projecting 10 cm on either side and back fill to chowkats with PCC 1:3:6 type C0 using 12.5 mm graded crushed stone aggregate including one shop coat of red oxide primer complete all as specified and directed. Note: PCC 1:3:6 type C-O as in backfill will be paid separately. |
| 29 | M&L cement concrete 1:3:6 type C-O using 12.5mm graded stone aggregate as in backfill of pressed steel door frames complete all as specified and as directed by the Engineer-in-charge. |
| 30 | M&L for colored non skid ceramic tiles 7 to 8 mm thick, area of each tile exc 0.11 sqm but n exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in colored cement to match shade, pattern, laying etc of tiles, over and incl 15 mm thick screed bed or bedding layers of cement mortar 1:6 as directed at site |
| 31 | M&L Glazed ceramic coloured tiles, (Premier quality), of size 450 x 350 x 7 mm thick on vertical surfaces such as skirting, dados and risers to steps etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces including 10mm thick rendering in CM 1:4 all as specified & directed. Note : Design, shape and pattern of fixing of tiles shall be as directed by Engr-in-Charge. |
| 32 | M&L for machine cut kota stone slab flooring 20-25 mm thick laid over and including cement screed base 15 mm thick in cement mortar 1:6, including cutting as required, rubbing and polishing to granite finish over complete all as specified and directed. |
| 33 | M&L for machine cut kota stone slab 20-25 mm thick as in riser of steps, skirting, dado and pillar laid over and including rendering of 10 mm thick in cement morter 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting as required, rubbing and polishing to granite finish complete all as specified and directed. |
| 34 | S&F for 35 mm thick 2nd class hard wood plain framed, panelled shutter (two panel) of factory made with lock rail and panel of 12 mm thick veneered particle board with commercial veneering on both faces including wooden beads on both sides, one coat of pink primer. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated |
| 35 | S&F for 35 mm thick 2nd class hard wood factory made glazed and Skelton shutters open rebated and prepared to receive glass/wire gauge etc. without sash bar but with lock rail edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass/wire mesh etc sizes of member as per clause 8.20(a) of SSR part -I for door shutter complete all as specified. |
| 36 | M & L for preparation of new wood or wood based surface and applying two coats of synthetic enamel paint over one coat of pink primer, all as specified. |
| 37 | S&F Aluminium handle cast type, anodised size 150mm long. |
| 38 | S&F Aluminium anodised barrel tower bolts, with bright bolt and fixed 200mm. |
| 39 | S&F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed |
| 40 | S&F Helical door spring 300mm including roller and roller plate complete fixed with welding to existing steel chowkhats all as specified and directed. |
| 41 | S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. having minimum thickness of powder coating 50 micron incl taking down complete all as specified and directed. |
| 42 | S&F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) incl Powder Coating of minimum thickness of powder coating not less than 50 micron complete all as specified and directed. |
| 43 | M&L for two coat of synthetic enamel paint tint after preparation of new surfaces of steel of any description and priming the surface with red oxide, exc 10cm in width or girth when unconnected with other painting or when painted in a different tint. |
| 44 | M&L for preparation of old painted steel surfaces of any description, over 10cm in width or girth,not otherwise described and applying one coat of synthetic enamel paint all as specified and directed. |
| 45 | Supply only Sheet glass 4.8mm thick ,ordinary quality fixed with aluminium beading and rubber gaskeet exc 0.50 sqm each. all as specified and directed. |
| 46 | S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks,or galvanised wire staples |
| 47 | M&L for Rendering 15 mm thick cement plaster in cement mortar (1:6) on stone masonry work or concrete surfaces of wall and to be finished even and smooth without using extra cement all as specified. |
| 48 | M&L for Rendering 15 mm thick cement plaster in cement mortar (1:4) on stone masonry work or concrete surfaces of wall and to be finished even and smooth without using extra cement all as specified.(incl all necessary scaffolding, lifting arrangement) |
| 49 | M&L for two coats of oil bound distemper of wall to newly plastered surfaces including preparation of surfaces complete all as specified and directed. |
| 50 | M&L for two coat of oil bound distemper to old treated surfaces including preparation of surfaces complete all as specified and directed. |
| 51 | M&L for two coat of cement based paint including preparation to new surfaces of walls including primer complete all as specified and directed by Engr-in-Charge. |
| 52 | Preparation of old plastered surface including filling of small holes etc. and applying two coat of cement based paint complete all as specified and directed by Engr-in-Charge. |
| 53 | M&L False ceiling of 9.5mm thick gypsum tiles (600x600mm) laminated with PVC film on the face side & metalised polyester film on the back side with all four edges sealed with PVC film (shade either plain white or crack) fixed using T grid/Cross-T/Wall angle/level clip & suspenders of standard galvanised sections in a grid size of 600x600mm of manufacturer M/s Saint Gobain or equivalent of Armstong/Everest including taking down existing ceiling board & grid work etc of any type/pattern complete. |
| 54 | M&L 75 mm thick PCC type C2 1:3:6 (40mm graded aggregate) as in Plinth protection filled with mastic filling and 10 mm wide joints between the walls and plinth protectin shall be filled with mastic filling complete all as specified. |
| 55 | S&F Stainless steel drapery rods of 25 mm dia complete with coloured conical end balls at both end, dia not less then 50mm and fitted with and incl MS bracket size 150mm made to shape or 75mm dia MS end wall to wall round block made to shape in male and female pieces as required at site. |
| 56 | Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store 15mm bore of pipe. |
| 57 | S & F or tubes, 'Medium grade, galvanised, with all fittings and fixed in short lengths complete to walls and ceilings or laid in floor , 15mm bore of pipe. |
| 58 | Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store 20mm bore of pipe. |
| 59 | S & F or tubes, 'Medium grade, galvanised, with all fittings and fixed in short lengths complete to walls and ceilings or laid in floor , 20mm bore of pipe. |
| 60 | Supplied and fixed Rotational moulded polyethlene water storage tanks three layers of 1000 ltrs capacity ISI marked (cylindrical vergical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mm thick Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms including Dismantling of old brocken water tanks and refixing of inlet, outlet & over flow pipe etc complete all as specified and as directed. |
| 61 | S & F in repair 15 mm bore bib taps, fancy type chromium plated cast copper alloy with crutch or butterfly handle, screwed for iron pipe or for brass ferrule . |
| 62 | S & F in repair 15 mm bore stop/angle valves, cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union.. |
| 63 | S&F sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing antilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed. |
| 64 | S&F in repair 20 mm dia gun - metal globe or gate valves with iron wheel head ,screwed both ends for iron pipe and fixed |
| 65 | S & F for PVC cupboard shelf/ partition/ frame / shutter of 18mm thick side of panel externally impact perfact finish to the shutter and joined together with solvent cement adhesive 8mm thick (4mmx2)x12mm wide PVC sheet is used as gap insert for top & bottom rail, 18mm x 1mm PVC edge lipping is done on top & bottom side using PVC solvent cement adhesive, incl hasp and stable for locking purpose, etc complete as per direction of Engr-in-charge, manufacture's specification and drawing. |
| 66 | M&L for 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue inned at joints, supplied and fixed, complete all as specified and directed |
| 67 | S&F Chequered cement concrete tiles 30cm x 30cm x 25mm thick,set, jointed with grey cement and no pigment,pointed in neat cement slurry in floor including 15mm thick screed layer in cement mortar 1:6, complete all as specified and directed . |
| 68 | M&L plain cement concrete 1:4:8, type D2( using 40mm graded stone aggregate) 75mm thick as in sub base of floor complete all as specified and directed . |
| 69 | M&L for Cement concrete B1 1:2:4 (20mm aggregate) in foundations, filling and mass concrete |
| 70 | S&F PVC SWR pipe 110mm bends |
| 71 | S & F 75mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches including taking down and removing from site complete all as specified and directed by Engr |
| 72 | M&L in repairs Diameter of outlet in 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement |
| 73 | M&L for Pre-cast RCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in cover slab fixed in position including necessary form work and set in CM 1:6 |
| 74 | Taking down old point wiring complete for light/fan/socket(5/15 Amps) bell point etc complete with all light fittings accessories, such as switch sockets 5/15 Amps ceiling rose etc including making good to the disturbed surface to match with the existing complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
| 75 | Taking down old point wiring complete for light/fan/socket(5/15 Amps) bell point etc complete with all light fittings accessories, such as switch sockets 5/15 Amps ceiling rose etc including making good to the disturbed surface to match with the existing complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysOct 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender