Tender For Provision Of Three Phase Power Supply Alongwith Transformer For Bldg No Ts-56 At Nagrota Under Ge Nagrota
Tender Value
27.09 Lakhs
Estimated cost
Bid Submission
08 Oct 2026
5 days left
EMD
54200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Three Phase Power Supply Alongwith Transformer For Bldg No Ts-56 At Nagrota Under Ge Nagrota
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 19-Sep-2026 | Corrigendum No 01 | BOQ | 01-Oct-2026 |
| 2 | 01-Oct-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 08-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor, 11000 Volts earthed, grade cross sectional area 95 Sqmm 3 core complete all as specified and directed. |
| 2 | Oil Cooled, copper wound, Step down \\"BIS marked & BEE star labelled \\" transformer of capacity 250 KVA plinth mounted outdoor type with latest feature complete with standard fitted HT 11 KV 3 phase, LT 433 V 3, phase 4 wire, 50 C/S oil immerse, naturally cooled externally cooling tube delta connection on primary HT 11 KV side and star connection on secondary LT 433 Volts with 7 position off circuit tap changer on HV side and to be changed by means of hand operated off load changing gear (tapping range + 7.5% in steps of 2.5% each) with vector group Dyn-11, including first filling of new transformer oil of dilectric strength not less than 55 KV with all fitting and accessories such as LT box with cable gland, HT box with cable gland, Silica gel breather, Oil level indicator gauge, drain out valve (oil tank), exhaust vent, air release valve, temp gauge, cast iron wheel etc comply with Energy efficient level (EEL 2) (Two) as per IS 1180 (Part-1) 2014 with amendment 1, 2, 3 and 4 having total losses @ 50% load 920 Watt and total losses @ 100% load 2700 Watt. Following items/ Accessories included in this rate and nothing any extra will be paid for these items:(i) Name, rating and diagram plate. (vii) Conservator with oil filling hole.(ii) 7 Positions off circuit tap changing switch. (viii) Thermometer pocket.(iii) Earthing terminals. (ix) Air release plug.(iv) Lifting Lugs. (x) Silica Gel breather.(v) Oil drain valve with plug. (xi) Removable inspection opening.(vi) Oil filter valve with plug. (xii) Explosion vent.Note: The rate shall also include replacement of HT/ LT bus bar terminals of suitable size with clamps, nut bolts etc., at site. |
| 3 | Cable jointing kit for 11 KV (Earthed) grade cable for outdoor termination cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 sqmm complete all as specified and directed. |
| 4 | XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 Volts grade, cross-sectional area 400 Sqmm 3.5 Core complete all as specified and directed. |
| 5 | XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 120 Sqmm 3.5 Core complete all as specified and directed. |
| 6 | GI light grade pipe of 80 mm for cable protection with fittings fixed on pole complete all as specified and directed. |
| 7 | Supply, fixing and erection truly in vertical position steel tubular swaged poles complete with cast iron base plate, finaial taper plug, bolts, nuts & screws as specified type 410 SP-55 (11.00m long) including painting with two coats of synthetic enamelled, and making alternate white & black strips each 30cm wide upto 1.5 m above from coping including taking down old PCC pole, complete all as specified and directed. |
| 8 | Air break gang operated switch triple pole, mechanically operated, complete with drop out fuse having 12 insulators ,mounted on insulator and steel frame, with operating mechanism worked from ground level, for current rating upto 400 amps, 11000 Volts with locking arrangement complete all as specified and directed. |
| 9 | HT lightening arrester metal oxide type (gap less) for out door use complete with all fittings and fixing arrangements transmission class discharge capacity 65 Kilo Amps suitable for 11000 Volts including brackets, clamps, nuts, bolts, washers and connecting to earth wire 4mm dia GI with manufacturers test certificate complete all as specified and directed. |
| 10 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth and getting out in any type of soil for errection of HT/LT poles laying of HT/LT underground cables and provisionn of stay assembly complete all as specified and directed. |
| 11 | All as per srl item No-10 here-in-before but depth exc 1.5m and not exc, 3.00m, complete all as specified and directed. |
| 12 | Returning, filling in, including spreading levelling, watering and well ramming in layers not exceeding 25 cm thick in any type soil complete all as specified and directed. |
| 13 | Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed. |
| 14 | Sand cushoning to underground cable in layers of 23cm thick (8 cm before laying the cable and 15cm thick after laying the cable) in trenches including watering and consolidation, complete all as specified and directed.Note: Only punned thickness shall be measured and paid. |
| 15 | Un-reinforced precast concreate cable cover of size 300mm x 180mm x 40mm suitable grade for class HV, Type-1, laid transversally along the length of cable complete all as specfied and directed. |
| 16 | Reinforced precast concrete cable cover, class LV, Type-1, flat size 250mm x 150mm x 40mm complete all as specified and directed. |
| 17 | PCC 1:4:8 type D-2, using 40mm graded crushed stone aggregates as in foundation filling and mass concrete in foundation of pole/ stays etc., complete all as specified and directed. |
| 18 | PCC 1:3:6 type C-2, using 40mm graded crushed stone aggregates as in foundation filling and mass concrete in foundation of pole/stays etc complete all as specified and directed. |
| 19 | PCC 1:2:4 type B-1, using 20mm graded crushed stone aggregates as in coping/ above ground level around the pole etc including necessary formwork complete all as specified and directed. |
| 20 | Earthing complete with galvanized mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected to galvanized earth wire 4.00 mm dia by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, PCC chamber of size 300mm x 300mm x 300mm (inside dimension) in 1:3:6 type C-1 using 20mm graded stone aggregate with fair finish, internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire mesh of 22 gauge, 80 mm thick pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with XPM, JALLI pit shall be filled with charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I (2009) as specified including provision of 15mm dia medium grade GI pipe for earth wire protection and 20 mm dia light grade for watering complete, all excavation and earth work in any type of soil and connecting the earthing to an earthing test point / main switch board as specified and testing on completion complete all as specified and directed. |
| 21 | Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc., as required 25mm x 4mm GI stip fixed on pole for lightening arrestor complete all as specified and directed. |
| 22 | Outdoor cubical type factory made LT Feeder piller box as per CPRI approved duly powder coated, IP-54 protection for outdoor shell suitable for 415 Volts, 3 phase, 4 wire 50Hz, AC supply system fabricated from CRCA powder coated totally enclosed, dust, weather and vermin proof, 3.15mm thick for outer shell having TPN aluminium busbar of capacity 600 Amps capacity mounted in porcelain insulator duly drilled hole for cable connection including front and rear side opening with locking arrangement and provision for incoming and outgoing cables with suitable glands including control wiring with minimum 2.5 Sqmm PVC insulated copper conductor for measuring of Voltage, Amp with indicators RYB, with following accessories complete all as specified and directed.Note: Feeder piller box shall be mounted on 50mm x 50mm x 6mm thick angle iron embedded in PCC 1:2:4, type B-1 using 20mm graded crushed stone aggregate, 30 cm deep and 45 cm above ground level. Danger notice plate should also be mounted on panel. Angle iron shall be painted with two coat of synthetic enameled paint over one coat of red oxide primer on supporting angle iron frame complete with following accessories:Incoming:(a) MCCB 400 Amp 4 pole 35/36 KA adjustable thermal and adjustable magnetic setting Ics = 100% of Icu - 01 No. Outgoing: (a) MCCB 4 Pole, 415V, 250 Amps, 36 KA adjustable type - 02 Nos.(b) MCCB 4 Pole, 415V, 100 Amps, 25 KA adjustable type - 02 Nos(c) Digital Multifuntional meter showing V, I, PF, HZ etc with suitable CT ratio. (d) Indicator lamp LED type (RYB) complete - 01 set complee with all accessories. |
| 23 | MCCB 4 Pole, 415 Volts, with microprocessor release 250 Amps with breaking capacity36 KA complete all as specified and directed. |
| 24 | Stainless steel enclosure company made suitable for MCCB 4 pole 250 Amp, fixing on wall grouting with suitable nut bolts complete all as specified and directed. |
| 25 | Platform for outdoor type transformer of size 2.50m x 2.50m x 1.20m with following specifications are as under (as per techanical drawing of platform)(a) Brick work in sub class B brick old size burnt clay bricks exc 6m mean radius on plan in cement mortar 1:4 complete all as specified and directed. (b) PCC 1:3:6 type C-2 as in foundation filling and mass concrete.(c) Stone boulder filling not exc 63mm including hand packing and well ramming complete all as specified and directed.(d) PCC 1:2 :4 type B-1 as in flooring / top surface of plateform complete all as specified and directed.(e) Plastering to brick work in cement mortar 1:4 complete, 15mm thick.(f) Angle iron of size 50mm x 50mm x 6mm as in post for fencing with gate and locking arrangement.(g) Mild Steel galvanised Chain link fencing with mesh size 50mm x 50mm, dia of wire 4mm. (h) Rest all as per drawings.Note: The platform is to be constructed as per drg No CEUZ/TD/1516/15 sheet 1/1. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 01, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 01, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Oct 08, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 5 daysOct 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysOct 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender