Tender For Schedule Of Work For Renovation Of The Office Buildings Of Ser Ore Divisional Store, Ht Maintenance And Construction Of New Sheds And Others Allied Civil Works Under Ser Ore Division, Wbsedcl In The District Of Hooghly
Tender Value
16.67 Lakhs
Estimated cost
Bid Submission
23 Sep 2026
12 days left
EMD
33340
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hooghly → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Schedule Of Work For Renovation Of The Office Buildings Of Ser Ore Divisional Store, Ht Maintenance And Construction Of New Sheds And Others Allied Civil Works Under Ser Ore Division, Wbsedcl In The District Of Hooghly
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. |
| 2 | (a) Depth of excavation not exceeding 1,500 mm. |
| 3 | (b) Depth of excavation exceeding 1,500 mm and up to 3000mm but not requiring shoring. |
| 4 | Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm.including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work)(a) With earth obtained from excavation of foundation. |
| 5 | Filling in foundation or plinth by Medium coarse sand in layers not exceeding 150 mm. as directed and consolidating same by thorough saturation with water ramming complete, including the cost of supply of sand. (Payment to be made on measurement of finished quantity). |
| 6 | Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. |
| 7 | Cement concrete with graded stone ballast (40 mm size excluding shuttering). In ground floor and foundation.(A) Pakur Variety. (a) 6:3:1 proportion |
| 8 | Hire and labour charges for shuttering with centreing and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works.a) 25 mm to 30 mm thick wooden shuttering as per decision and direction of Engineer- in- charge. |
| 9 | i) In Ground Floor |
| 10 | ii) In 1st Floor |
| 11 | ii) In 2nd Floor |
| 12 | b) 25 mm to 30 mm shuttering without staging in foundation |
| 13 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups,binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bennding to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.Mild steel/ Tor steelJSW/JSPL/SHYAM/SRMB/BMASL/ELECTROSTEEL/SSL |
| 14 | i) In Ground Floor |
| 15 | ii) In 1st Floor |
| 16 | iii) In 2nd Floor |
| 17 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. (Pakur variety) |
| 18 | i) In ground floor and foundation. |
| 19 | ii)1st. Floor |
| 20 | iii) In 2nd Floor |
| 21 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.(Pakur variety) |
| 22 | i) In ground floor and foundation. |
| 23 | ii)1st. Floor |
| 24 | iii) In 2nd Floor |
| 25 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (6mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. |
| 26 | Brick work with 1st class bricks in cement mortar.(a) With cmement morter(1:4)i) In foundation & plinth |
| 27 | Brick work with 1st class bricks in cement mortar(b) With cmement morter(1:6)i) In foundation & plinth |
| 28 | ii) In super structure, ground floor |
| 29 | iii) In 1st Floor |
| 30 | iv) In 2nd Floor |
| 31 | 125 mm thick brick work with 1st class bricks in cement mortar (1:4) |
| 32 | i)In superstructure, ground floor. |
| 33 | ii)In 1st.floor |
| 34 | iii) In 2nd Floor |
| 35 | Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m.a) In ground floor including roof. |
| 36 | Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m.In ground floor including roof. a) upto 150 mm. Thick |
| 37 | Dismantling R.C. floor, roof, beams etc. Including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel bars.(a) In ground floor including roof. |
| 38 | Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge. |
| 39 | Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed. |
| 40 | Scraping of moss, blisters etc.thoroughly from exterior surface of walls necessitating the use of scraper, wire brush etc.(Payment against this item will be made only when this has been done on the specific direction of the Engineer-in-charge) |
| 41 | Removing loose scales, blisters etc. from old painted surface and thoroughly smoothening the surface to make the same suitable for receiving fresh coat of paint. |
| 42 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Exxcluding cost of chipping over concrete surface.](i) With 1:6 cement mortar |
| 43 | (A) 15 mm. thick plaster. |
| 44 | (a) In ground floor |
| 45 | (b) In 1st Floor |
| 46 | (c) In 2nd Floor |
| 47 | (B) 20 mm. thick plaster |
| 48 | (a) In ground floor |
| 49 | (b) In 1st Floor |
| 50 | (c) In 2nd Floor |
| 51 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Exxcluding cost of chipping over concrete surface.](ii) With 1:4 cement mortar |
| 52 | (A) 10 mm. thick plaster. For Ceiling Works. |
| 53 | (a) In ground floor |
| 54 | (b) In 1st Floor |
| 55 | (c) In 2nd Floor |
| 56 | Labour for Chipping of concrete surface before taking up Plastering work. |
| 57 | Neat cement punning about 1.5 mm. thick in wall, dado, window, sills, floor, drain etc. NOTE: Cement 0.152 cu.m. per sq.m. |
| 58 | Supplying fitting & fixing 1st quality Ceramic Tiles in walls & floors to match with the existing works and four no of key stones (10mm) fixed with araldite at the back of each tiles and finishing the joints with white cements mixed with colouring oxide if required, to match the colour of tiles including roughening of concrete surface , if necessary, or by synthetic adhesive and grout materials etc.(A) WallWith sand cement mortar (1:3) 15 mm thick and 2mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/sqm and joint filling using white cement slurry @ 0.20 Kg/sqm.Area of each tile upto 0.09 Sq.mOther than Coloured Decorative including white. |
| 59 | Supplying and laying chequered tiles of any shade & of approved quality with (1:1½:3) cement concrete laid in panels or patterns as directed in pavement,footpath etc. including necessary under lay 25 mm thick [avg.] cement mortar (1:3) complete in all respect with all labour and materials.[Using cement slurry @ 4.4 kg/Sq.m at back side and @ 2.4 kg/Sq.m for joint filling.](i) 25 mm. thick (red variety) |
| 60 | Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./Sq.M or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per Sq.M below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contrr](I) With application slurry @1.75 kg/ Sq.m, 20 mm sand cement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/ Sq.m white cement for joint filling with pigment.A) Deep colour and while(a) In Ground Floor |
| 61 | Supplying & laying as per IRC-SP:063-2004 paver unit of any shade of approved quality as per relevant IS code, laid in pattern as directed in avement, footpath, driveway (paver block only), etc including necessary underlay complete in all respect with all labour and material. (i) 50 mm thick interlocking designer concrete paver block M30 grade for non-traffic zone,buiding premises,garden,parks,domestic drive as per IS: 15658-2006(over 20-30 mm medium sand bed on 200mm thk bound gnaular /granular base course including cost of sand for sand bed but excluding cost of base course & subgradepreparation.) (a) Grey |
| 62 | M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.(i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr. |
| 63 | (a) In Ground Floor. |
| 64 | (b) In 1st Floor |
| 65 | (c) In 2nd Floor |
| 66 | Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame excluding cost of concrete, Iron Butt Hinges and M.S. clamps. (The quantity shoud be corrected upto three decimals).Sal : Local |
| 67 | i) In Ground Floor. |
| 68 | ii) In 1st Floor |
| 69 | Supplying solid flush type doors of commercial quality, the timber frame consisting of top and bottom rails and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 37.5mm wide battens places both ways in order to make the door of solid core and internal lipping with Garjan or similar wood vveneers using phenol formaldehyde as glue etc. complete, including fitting, fixing shutters in position but excluding the cost of hinges and other fittings in ground floor.35mm thick shutters (single leaf) |
| 70 | i) In Ground Floor. |
| 71 | ii) In 1st floor |
| 72 | Supplying fitting and fixing in position approved P.V.C. door frame(matt finish) made of extruded P.V.C. multichamber hollow section having dimensions 60mm x 50mm x2 mm. (+ - 0.2 mm), horizontal section will be joined with vertical section by galvanised steel screws after inserting two number steel brackets as reinforcement making suitable space for placing hinges, one steel tube 40mm x 20mm will be inserted on one full vertical side of the frame (hinge side) as reinforcement, the frame will then be fixed in the opening with the help of P.V.C. expandable fastner wooden gutties and galvanised steel screws including cost of all materials and labour, hire charges of tools and appliances, carriage of all materials taxes and all other incidental charges complete. |
| 73 | Renewing PVC Door Shutter - 30 mm thick. Supplying fitting and fixing P.V.C. door shutter of approved quality & shade in position, the style & rail of the P.V.C. door shutter will be made of rigid P.V.C. multicavity hollow chamber of 59 mm.x 30 mm. section with 2.0 mm.(+ - 0.2 mm) wall thickness.Horizontal & vertical section shall be fixed to each othe by self tapping screws and one solid polymeric/M.S. galvanised tubular L-shaped bracket 10 mm.X 200 mm. in each corner of the shutter frame for placing hinges. Polymer based multicavity hollow section of 120 mm. X 30 mm. with2.0 mm.(+ -0.2 mm.) wall thickness will be placed in the middle, reinforced by solid polymer bar of 200 mm. long at both ends and screws ftrom both sides as lock rail.the section frame will then be fitted in by PVC panels of size 100 mm.X 25 mm. with wall thickness 1.2 mm.(+ -0.2 mm.) and 2 nos. of 6 mm.bright rod will be inserted horizontally with both side check and nut system and streches where fixing of hinges /hasp bolt/tower bolt/door ring are required to be strong enough to with stand wear and tear.The rate is inclusive of cost of all materials, labour, and hire of tools and plants and appliances.Carriage of all materials taxes and all other incidental charges complete.The rate is exclusive of cost of hinges, hasp bolt, tower bolt, door ring etc. |
| 74 | MS work in cable trench, cover slab, chaquered plate, clamp, cleats, brackets, etc. made from flat angle channel, tees, chequered plates 6mm thick, etc including necessary cuting to size fabricating, drilling of holes, forgeing, welding, revating, tightening with bolts and nuts with necessary washers including errection, fitting and fixing in position with all labour and materials, complete as per drawing and direction. |
| 75 | Collapsible gate with 40mm x 40mm x 6mm Tee as top and bottom guide rail, 20mm x 10mm x 2mm vertical channels 100mm apart in fully stretched position 20mm x 5mm M.S. flats as collapsible bracigs properly rivetted and washered including 38mm steel rollers including locking arrangements, fitted and fixed in position with lugs set in cement concrete and including cutting necessary holes, chasing etc. in walls, floors etc. and making good damages complete. In ground floor.(Payment will be made on the area of th gate covered by two guard rails and two extreme channels) |
| 76 | Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete: With continuous plate base (hexagonal/round rod)125mm grip x 12mm dia rod. |
| 77 | Anodised aluminium skeleton bolt of approved quality manufactured fromextruded section conforming to I.S: specification (I.S: 204/74) fitted and fixedwith cadmiim plated screws: 600mm long x 12mm dia. bolt. |
| 78 | Hydraulic door closer of approved quality as per I.S.I. standard fitted and fixed complete. Medium (I.S.I. size 2) |
| 79 | Supplying, fitting and fixing M.S. clamp for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete (1:2:4) as per direction. (Cost of cement concrete will be paid separately) 40mm. X 6mm, 125mm. Length.(The concreting will have to be done for equivalent thickness of 2 layers of brick work and for the entire width of the wall. No deduction on brick work will be made). |
| 80 | Welding in M.S. structural work with gas or electric:(a) Tack weld |
| 81 | Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. 100mm. X 50mm. X 1.25mm. |
| 82 | Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting.300mm long. |
| 83 | Supplying 125mm long wooden buffer block (Local sal). With Sal : Malayasian |
| 84 | Applying Exterior grade Acrylic Primer of approved quality and brand on plastered or concretesurface old or new surface to receive decorative textured (mat finish) or smooth finish acrylic exterior Immersion paint including scrapping and preparing the surface thoroughly, complete as per manufacturer's specification and as per direction of E.I.COne coat on new surface. |
| 85 | i) In ground floor. |
| 86 | ii)In 1st floor |
| 87 | iii)In 2nd floor |
| 88 | Protective and decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required.The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.Super Protective 100% Acrylic Emulsion. (Two Coat). |
| 89 | (i) In ground floor. |
| 90 | ii) In 1st floor |
| 91 | iii) In 2nd floor |
| 92 | Applying Interior grade Acrylic Primer of approved quality and brand on plastered or concrete surface old or new surface to receive distemper / acrylic emulsion paint including scrapping and preparing the surface thoroughly, complete as per manufacturer's specification and as per direction of E.I.C One coat. i) Water based interior grade Acrylic Primer |
| 93 | Applying Acrylic emulsion paint of approved make and brand on walls and ceiling including sand papering in intermidiate course including putty (two coats). Standard Quality. |
| 94 | Rendering the surface of walls and ceiling with white cement based wall putty of approved make and brand(1.5mm thick). |
| 95 | (a) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 96 | (b) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 97 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary. (a) On timber or plastered surface :With super gloss (hi-gloss) -Two coats (with any shade except white) |
| 98 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary. (b) On steel or other metal surface :With super gloss (hi-gloss) -Two coats (with any shade except white) |
| 99 | Painting with superior quality aluminium paint of approved make and brand including smoothening surface by sand papering etc. on steel surface :Two coats |
| 100 | Anti-termite treatment to the outside of foundation with chemical emulsion by admixing chloropyrofos emulsifiable concentrate (1% concentration) with water by weight, drilling 12mm. dia holes in concrete or masonry apron at an interval of 300mm. to a depth, of 300mm or more as close to the plinth wall aspossible and the chemical emulsion pumped into those holes to soak the soil below at a rate of 2.25 litres per linear metre complete as per specification laid down in para 4.3.1.1 of Code I.S.-6313 (Part-III)-1981. |
| 101 | Taking out carefully G.C.I. or C.I. or asbestos sheets (including ridges etc.) from roof or wall after unscrewing bolts, nuts, screws etc.and stacking the material at site as directed.(Payment to be made on measurement of portion of roof or wall removed.) |
| 102 | Fitting and fixing old pieces of asbestos, G.C.I. or C.I. sheets or plain sheets including closing old holes with washers and sheet-bolts and nuts, etc. and including fixing the same to supporting frame with necessary hook-bolts, washers, putty etc. (excluding cost of sheets). (Payment to be made on area of finished work.)With all new fittings including the cost thereof. (a) In roof |
| 103 | Supplying fitting & fixing UPVC Pipes A type and fitttings conforming to IS 13592-1992 with all necessary clamps, nails including making holes in walls, floors etc cutting trenches in any soil through masonary concrete structures etc, if necessary, and mending good damages including joining with jointing materials (Spun yarn, valamoid / bitumen/ M-Seal, etc.) complete. |
| 104 | A) UPVC Pipes. 110 mm |
| 105 | B) Plain Tee (UPVC), 110mm dia. |
| 106 | C) UPVC Shoe, 110mm dia. |
| 107 | D) Bend 87.5 degree, 110 mm dia. |
| 108 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992.(A) Single Socketed 3 Meter Length. 110 mm |
| 109 | (B) Bend 87.5º. 110 mm |
| 110 | (C) Plain Tee. 110 mm |
| 111 | Supplying fting and fixing windows and ventilators with or without integrated grills conforming to IS 1038-1975 and manufactured from rolled steel sections conforming to IS 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc, including hoisting in position, straightening if required, fixing lugs in cement concrete ( 1:2:4) with stone chips 20 mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing.(A) In Ground floorFlash butt welded windows and ventilators (no shop priming will be allowed to facilitate inspection of workmanship)Without integrated grills. |
| 112 | (a) Fixed type steel windowes as per IS sizes with horrizontal glazing bars. |
| 113 | (b) Openable steel windows as per IS sizes with side hung shutters and horizontal glazing bars, with or outhout fixed type ventilators |
| 114 | c) Two point nose steel handle including fitting and fixing. |
| 115 | d) Aluminium peg stay 300 mm long including fitting and fixing. |
| 116 | (e) M.S. integrated grill as per approved design integrated with steel window or ventilator, joints continuously welded with M.S. flats and bars. Mode of measurement.(The weight of grill will be determined (theoritically) from section of the grills actually used excluding the rolled steel section of the window / vent. The weight of the grill should be calculated at 7.85 gm./ cu.cm.) |
| 117 | Renewing best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (In all floors for internal wall & upto 6 m height for external wall)(i) 3 mm thick (weighing 7.4 kg/Sq.m) |
| 118 | Extra for fixing glass panes in steel window. |
| 119 | Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - In- Charge. (Payment will be made on finished length of the work). In 10-12 Micron thickness anodizing film. (Natural White)(A) Fixed partitions (unsupported length of vertical member up to 1.5 M height of both ends of vertical member restrained with panels within 0.90 Sq. M) |
| 120 | (a) Top , bottom & side member. |
| 121 | (b) Intermediate Member |
| 122 | (B) 2 - track sliding window : |
| 123 | (a) Bottom frame |
| 124 | (b) Top & sides frame |
| 125 | C) 3- track sliding window : |
| 126 | a) Bottom frame |
| 127 | b) Top and side frame. |
| 128 | D) Shutter for all track sliding window. |
| 129 | a) Bottom & Top member. |
| 130 | b) Style side member. |
| 131 | c) Interlock member. |
| 132 | (E) Movable door shutter : |
| 133 | (a) Door frame ( top and sides ) |
| 134 | (b) Shutter: |
| 135 | (i)Top rail- |
| 136 | (ii) Bottom rail- |
| 137 | (iii) Lock rail- |
| 138 | (iv) Door vertical- |
| 139 | (v) Glazing clip- |
| 140 | Labour charges for fabrication and installation of composite door, window, partitions made from anodized extruded alloy Sections for following units: |
| 141 | (A) Glazed aluminium sliding windows made of extruded and annodized alloy aluminium sectios, fabrications, including cutting to proper shape and size, drilling and aligning of window shutter frame fitted with in builtlocking arrangements, sliding rollers and other necessary fittings, fixture, adhesives and joineries along with extruded neoprine or EPDM gasketing in between window frame and masonry work (walls, column, beam.lintels etc.) as well as between glass and shutter frame for fixing glass and Polysulphide sealant and in between shutter and window frame where necessary including cutting to requisite size and fixing glass as per drawing, specification and direction of EIC.The rate includes the hire charge of all tools and plants, including all incidental charges, adhesive, joineries such as screw, cleat angle etc. but excluding the cost of extruded aluminium sections, glass, neoprene / EPDM gasket, locking arrangement and rollers. |
| 142 | (a) Ground floor |
| 143 | (i) 2 track sliding window. |
| 144 | (ii) 3 /4 track sliding window. |
| 145 | (b) 1st floor |
| 146 | (i) 2 track sliding window. |
| 147 | (ii) 3 /4 track sliding window. |
| 148 | (B) Fully glazed single leaf reamless swing door made of anodized aluminium alloy extrusions fabrication after cutting to proper shape and size, drilling and aligning fitted with heavy duty hydraulic action floor spring with top pin assembly and fitted with inbuilt locking arrangement and all other necessary fittings, fixture, adhesives and joineries, cutting the glass to requisite shape and size mounting the edges for fitting the same with dry set neoprine/EPDM gasket.The rate includes the hire charge of all tools and plants, adhesive, joineries but excludes the cost of extruded aluminium sections, glass, panel boards EPDM gasket, locking arrangement, weather gasket / wool pile, floor spring, top pin, handle, tower bolt etc. |
| 149 | (a) Ground floor |
| 150 | (b) First floor |
| 151 | (C) Partly Glazed partly panelled partition or fixed glazed made of extruded and anodized alloy aluminium sections, fabrication after cutting proper shpe and size drilling and aligning, fitted with built locking arrangement, cutting glass / board ( pre laminated / partical black ) to requisite shape and size moulding the edges fitted and fixed clips and dry set neoprene of EPDM gasketingalong with other necessary arrangements for fixing the partition to wall, floors, beams columns polysulphide sealant for water proofing if necessary complete in all respect as per drawing, specification and direction of Engineer -In- Charge. The rate includes the hire charges for all tools and plants, adhesives, joineries such as screw, fastener, but includes the cost of extruded aluminium sections. EPDM gasket, glass board, glazing clips locking arrangements etc.For partition using sections of size. |
| 152 | (a) Ground floor |
| 153 | (i) 63.50 mm x 38.10 mm |
| 154 | (b) First floor |
| 155 | (i) 63.50 mm x 38.10 mm |
| 156 | Supplying PVC rollers for sliding windows as per direction of Engineerin charge. |
| 157 | Supplying maruti lock (100mm) |
| 158 | Supplying 125 mm. Dia. Acrylic handle for aluminium door as per approved make and brand. Natural colour. |
| 159 | Supplying concealed type heavy duty PVC headed aluminium tower bolt for double leaf doors as per approved make and brand as per direction of Engineer in charge. 250mm long |
| 160 | Supplying 4 lever mortice lock or any approved make and brand as per direction of the Engineer- in -charge. 100 mm. |
| 161 | Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987. (i) 4mm thick clear glass. |
| 162 | Supplying EPDM gusket of approved make and brand as per direction of Engineer in charge. |
| 163 | a) 'U' shaped EPDM gasket for frames. |
| 164 | b) Weather gasket / Wool pile for door vertical. |
| 165 | Supplying, fitting and fixing bib cock or stop cock. |
| 166 | a) Chromium plated Stop cock [Equivalent to Code No.513(A) & 513(B) & Model - Tropical/Sumthing of ESSCO or similar brand] |
| 167 | b) Chromium plated concealed Stop cock [Equivalent to Code No.514(A) & Model - Tropical/Sumthing of ESSCO or similar brand] |
| 168 | c) Chromium plated Angular Stop cock with wall flange [Equivalent to Code No.5053& Model - Florentine of JAQUAR or similar brand] |
| 169 | d) Chromium plated Bib Cock Short body [Equivalent to Code No.511 & Model - Tropical/Sumthing special of ESSCO or similar brand] |
| 170 | e) Supplying, fitting and fixing pillar cock of aooroved make. (i) CP Pillar Cock - 15 mm.(Equivalent to Code No. 507 & Model - Tropical / Sumthinhg Special of EESCOor similar brand). |
| 171 | f) Hand Shower(Health Faucet) with 1mtr Fexible Tube with Wall Hook(Equivalent to Code No.573 & Model -ALLIED of Jaquar or similar). |
| 172 | Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer.1000 litre capacity. |
| 173 | Labour for hoisting plastic water storage tank.upto 1500 litre capacity. |
| 174 | (i) Upto 1st story from G.L. |
| 175 | (ii) Extra for each additional story |
| 176 | Labour for punching holes plastic water storage tank upto 50 mm. dia. |
| 177 | Supplying, fitting and fixing stainless steel sink complete with waste fittings and two coats of painting of CI brackets. 530 mm. X 430 mm. X 180 mm. |
| 178 | Supplying, fitting and fixing Half round channel with or without outlet as required set in cement concrete (6:3:1) with jhama chips complete.(payment of concrete will be paid seperately). 600 mm. X 150 mm.White vetrious china ware. |
| 179 | Supplying, fitting and fixing best quality Indian make mirror 5.5 mm. thick with silvering as per I.S.I specifications supported on fiber glass frame of any colour, frame size 550mm x 400mm.size 550mm x 400mm. |
| 180 | Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm. x 75 mm. X 75 mm. wooden blocks complete.470 mm X 280 mm X 340 mm |
| 181 | Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete. (E.W.C)(a) Plastic ( hollow type ) black |
| 182 | Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding 'P' or 'S' trap (excluding cost of concrete for fixing).(a).530 mm.X 410 mm. |
| 183 | Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc.a) With P trap |
| 184 | Supplying , fitting & fixing 10 liter PVC low down cistern conforming to I.S specification with PVC fittings complete CI brackets including two coats of painting to bracket etc. |
| 185 | Supplying, fitting and fixing white vitreous china best quality approved make Wash basin with C.I. brackets on 75mm X 75mm X 75mm. Wooden blocks, C.P. waste fittings of 32 mm dia, one approved quality brass C.P. pillar cock of 15mm dia, C.P. chain with rubber plug of 30 mm dia, approved quality P.V.C waste pipe with C.P. nut 32mm dia, 900 mm long approved quality P.V.C connection with heavey brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint.A) 550 mm. x 400 mm. size |
| 186 | Renewing,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps.750 mm long |
| 187 | Supplying,fitting and fixing 32 mm dia. Flush Pipe of approved make with necessary fixing materials and clamps complete.i) Polythene Flush Pipe |
| 188 | Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. 750 mm long |
| 189 | Supplying, fitting and fixing towel rail with two brackets. C.P. over brass 25 mm. dia. and 450 mm. long. |
| 190 | Supplying, fitting and fixing porcelain soap tray of approved make.Recessed soap tray of size 150 mm. X 150 mm. |
| 191 | Supplying, fitting and fixing approved patent vent cowl I.C.I. conforming to I.S.S. and painting two coats to the exposed surface with approved paint complete. (Payment of Painting will however be paid seperately).100 mm. dia. |
| 192 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)(i) 32 mm dia. |
| 193 | (ii) 25 mm dia |
| 194 | (iii) 20 mm dia |
| 195 | (iv) 15 mm dia |
| 196 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) Consealed work |
| 197 | (i) 15 mm dia |
| 198 | (ii) 20 mm dia |
| 199 | Constructing inspection pit of inside measurement 600 mm. X 600 mm. X upto 600 mm. (depth) with 250 mm. thick 1st class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm. thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling , 15 mm. thick (1:4) cement plaster to inside walls and out-side walls upto G.L. and 20 mm. thick (1:4) cement plaster to bottom of the pit, providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm. thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm. thick cement plaster (1:4) in all external surface of the slab and one 560 mm. dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials.With Pakur variety.(SAIL/TATA/RINL) |
| 200 | Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm. dia. R.C.C. manhole cover (heavy type) of approved make supplied, fitted and fixed in the 100 mm. thick R.C.C. (1:1.5:3) top slab with necessary fittings, 20 mm. thick cement plaster (1:4) with neat cement finish to the internal surfaces and 15 mm. thick cement plaster (1:4) to outside wall upto 200 mm. below G.L. floor finished with 25 mm.thick grey artificial stone over 100 mm. thick R.C.C. (1:1.5:3) bottom slab including supplying, fitting and fixing all necessary specials, fittings, S.W. tees , C.I. foot rest etc. including excavation earth in all sorts of soil, shoring, bailing out and pumping out water as necessary, ramming, dressing the bed and refilling the sides of the tanks with earth, removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes joints etc.With internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials. For 20 usersWith Pakur variety.(SAIL/TATA/RINL) |
| 201 | Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with 20 mm. thick cement plastering (1:4) to inside face upto the depth of cement brick work, 15 mm. thick cement plaster (1:4) on outer face from top of the well upto G.L. and 6 mm. thick cement plaster (1:4) on the top the R.C.C. cover slab including filling bottom 1.00 metre of inside of the well with brick metal (50 mm. to 63 mm. size0 including R.C.C. cover slab of 100 mm.thick with cement concrete (1:1.5:3) with stone chips with necessary reinforcements and shuttering including one 560 mm. dia. R.C..C. manhole cover (heavy type) of approved make supplied, fitted and fixed in the cover slab with necessary fitings, making necessary arrangementsfor pipe conections, excavation of well including shoring, dewatering and removing the exess earth from the premises as per direction complete in all respect with all costs of labour and materials.With 250 mm. thick dry brick work and 250 mm. thick cement brick work (6:1) and 1.00m. Inside dia. |
| 202 | Clearing compound premises from shurbs, plants, jungles, etc. by cutting and removing as directed. |
| 203 | Cleaning the concrete surface by removing dirt and debris, marking defective locations and removing loose concrete by careful stripping untill hard surface is exposed, cutting the concrete to regular shape, wire brushing the exposed surface and removing debris from site complete as per direction of the Engineer - in - Charge. |
| 204 | Cutting chase up to 125 x 150 mm and subsequent mending of damages. In brick wall [Cement-3.6Kg/ Mtr] |
| 205 | Supplying and laying Polythene sheet (150gm /sq.m.) over damp proof course or bellow flooring or roof terracing or in foundation or foundation trenches. |
| 206 | Supplying fitting and fixing shower of approved brand and make. Chromium plated round shower with revolving joint. (Equivalent to Code no. 541 (N) and model- Tropical/ sumthing special of Essco or similar brand). |
| 207 | Supply fitting fixing CI grating (Heavy type). Upto 100 mm dia. |
| 208 | Supplying, fitting and fixing steel rolling shutter profile type with 18 B.G. of approved type steel latches section 75 mm wide, fitted with coil wire spring to necessiate the fitting of required Nos.of C.I.Pulleys on heavy type solid drawn seamless steel tube complete with locking arrangements both inside and outside specilly builtup side guide channels including providing a hood for the steel rolling shutter in the room,painting two coats of approved aluminium paint over a coat of red lead primer complete. |
| 209 | Applying 2 coats of bonding agent with synthetic multi functional rubberemulsion having adhesive and water proofing properties by mixing with waterin proportion (1 bonding agent : 4 water : 6 cement) as per Manufacturer'sspecification [Cement to be supplied by the Department] |
| 210 | Supplying, fitting galvanised 3 ply 12 gauge / 4 points line of barbed wire in fencing (holes already made in the body of the post) or fixed by staples tightening and fixing the wires in taut condition with straining bolts including the cost of cutting and of lapping joints in the wire as necessary but excluding the cost of galvanised staples,straining bolt and binding wire where necessary.(Payment to be made on the length of individual lines of wire.) |
| 211 | Supplying galvanised straining bolts (with eye at one end with double nuts and washers) fitted and fixed complete.(i) 12 mm. dia. (a) 300 mm. |
| 212 | Supplying fitting and fixing 600 mm ( ±30 mm) diametre R.B.T (Reinforced Barbed Tape) Concertina fencing on wall top using concertina coils stretched to approx.6 meters length at site clipped with two nos. of horizontal R.B.T strands which will be tensioned and fixed with the vertical M.S angle iron posts by means of security fasteners (such as 'C' clips, R.B.T clips etc.) |
| 213 | M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete.Payment to be made on the basis of calculated weight of structural memebrs of MS Holow Section as specified in relevent IS code in finished work. Payment for gusset, bracket, cleat may be made by adding the actual weight of such items with weight of finished structural members. The rates are considered for a hight of erection 8 m. / 2nd floor level from the ground. Add 1.5 % extra over the rate for each additional floor or 4m. beyond the initial 8 m. or part thereof. |
| 214 | Supplying, fitting & fixing Zn-Al alloy (55% Al & 45% Zn) coating of 150 grams per sq. metre (followed by colour coated on both side) steel sheet work having minimum yieldstrength of 550 Mpa of trapizoidal profile of approved make (excluding the supporting frame work) fitted and fixed with 55 mm & 25 mm self tapping screw, EPDM Washer 16 mm dia & 3 mm th. washer etc. complete with 150 mm end lap and one corrugation minimum side lap. (Payment to be made on area of finished work).(i) In Roof:- a) With 0.5 mm thick sheet Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysSep 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender