Tender For Repairing Of Various Compressors, Rusted Ducting & Other Misc Works At Various Barat Ghars Under Bm-Ii(E) Division..
Tender Value
28.88 Lakhs
Estimated cost
Bid Submission
21 Sep 2026
10 days left
EMD
57760
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairing Of Various Compressors, Rusted Ducting & Other Misc Works At Various Barat Ghars Under Bm-Ii(E) Division..
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of defective 12 TR compressor in existing 48 TR air-cooled plant of Blue Star at Laxmi Bai Nagar Gym including recovery of refrigerant gas, dismantling of existing compressor, disconnecting electrical and refrigeration connections, lifting/shifting by heavy labour using chain pulley block andallied tackles, installation of new compressor, brazing of suction/discharge lines with nitrogen purging, replacement of filter drier and minor consumables, pressure testing, vacuumization, refrigerant gas charging, oil topping if required, electrical reconnection, testing, commissioning, trial run, and making the system fully operational complete in all respects |
| 2 | Dismantling of defective 20 TR compressor in existing 60 TR air-cooled plant of Blue Star at Laxmi Bai Nagar Bart Ghar including recovery of refrigerant gas, dismantling of existing compressor, disconnecting electrical andrefrigeration connections, lifting/shifting by heavy labour using chain pulley block and allied tackles, installation of new compressor, brazing of suction/discharge lines with nitrogen purging, replacement of filter drier and minor consumables, pressure testing, vacuumization, refrigerant gas charging, oil topping if required, electrical reconnection, testing, commissioning, trial run, and making the system fully operational complete in all respects. |
| 3 | Supplying, installation, testing & commissioning of 3.0 HP Monoblock pump set 3 phase, 440V, 50Hz, 1440 rpm complete with all accessories and dismantling the existing pump set with the help cutting set, welding set connection, testing & commissioning etc. complete as required including making base frame foundation for the pumps with the help of MS C Channel of size 100x50x0.5mm complete in all respect as per satisfaction of engineer in chargea) Kaka Nagar- 3 Nosb) Khan Market-3 Nosc) Laxmi Bai Nagar-3 Nos |
| 4 | Supplying, installation, testing & commissioning of 5.0 HP Monoblock pump set 3 phase, 440V, 50Hz, 1440 rpm complete with all accessories and dismantling the existing pump set with the help cutting set, welding set connection, testing & commissioning etc. complete as required including making base frame foundation for the pumps with the help of MS C Channelof size 100x50x0.5mm complete in all respect as per satisfaction of engineerin chargea) Laxmi Bai Nagar gym-3 Nos |
| 5 | Supplying, fabricating and fixing at site of MS laminated sheds of following size made up with 65x32 mm square pipes and MS laminated sheet welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer and 2 coats of paint including labour cartage etc complete as required for the following locations at the terrace.Size of shed : 4500mm X 3000 mm X 2400mma) Kaka Nagar – 1No for chiller pumpsb) Khan Market- 1No for chiller pumpsc) Laxmi Bai Nagar - 1No for chiller pumpsd) Laxmi Bai Nagar Gym-1No for chiller pumps |
| 6 | Size of shed : 6000mm x 1000mm x 3000mmLaxmi Bai Nagar - 1No for 60TR chiller plant |
| 7 | Size of shed : 5000mm x 1000mm x 3000mmLaxmi Bai Nagar Gym - 1No for 48TR chiller plant |
| 8 | Dismantling the existing ducts as in where required with the help of Ladder/scaffolding and SITC of new fabricated at site GSS sheet metal rectangular ducting complete with neoprene rubber gaskets,elbows vanes,hangers, supports etc. complete with 0.8 mm sheet thickness complete as Required at site. |
| 9 | Supplying and fixing of factory-built new condenser coils suitable for 48 TRAir-Cooled Chiller, coil size 68\\" × 49\\", 3-row (3RD) construction, comprisingaluminium fins of 12–13 fins per inch mechanically bonded to 3/8\\" O.D.seamless copper tubes, complete with horizontal and vertical copper headersof 41.3 mm and 28.6 mm diameter, enclosed in heavy-duty GSS sheet casing,suitable for the existing chiller. The work shall include careful dismantling ofthe existing unserviceable condenser coil by specialized HVAC technicians,recovery of refrigerant (where required), disconnecting and removing allrefrigerant piping, supports, fasteners and accessories, safe handling andlifting of the old coil without causing damage to the chiller casing or othercomponents, shifting the dismantled coil to the designated location, supplyingand installing the new condenser coil, alignment, brazing/silver brazing ofrefrigerant joints using nitrogen purging, welding, pressure testing with drynitrogen, leak testing, evacuation with a vacuum pump, refrigerantcharging/top-up as required, replacement of filter drier and consumables ifrequired, recommissioning, testing and performance trial of the completechiller to the satisfaction of the Engineer-in-Charge. |
| 10 | Deduct - Credit for retaining the old compressors 12TR-2 Nos , 20TR-1 No. ,3HPpump-9Nos ,5 HP pump-3 Nos, ducting 150sq mtr & condenser coil – 4 Nos Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysSep 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender