Tender For Construction Of 2 Nos E Type Quarter Building At Phc Kurtamagarh In The District Of Kandhamal For The Year 2024-25
Tender Value
70.58 Lakhs
Estimated cost
Bid Submission
22 Sep 2026
9 days left
EMD
70590
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kandhamal → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of 2 Nos E Type Quarter Building At Phc Kurtamagarh In The District Of Kandhamal For The Year 2024-25
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation in hard soil or gravelly soil including dressing and levelling the bed and depositing the soil within 50m initial lead and 1.50m initial lift and as per direction of the Engineer-in-Charge. |
| 2 | Filling F&P with excavated earth including watering and ramming with cost of all labour etc. complete. |
| 3 | Removal of Excavated earth up to adistance of 5km by mechanical means |
| 4 | Supplying & filling foundation and plinth with sand well watered and rammed including cost of all materials, T&P etc complete.Foundation trenches of Columns& footing |
| 5 | Cement Concrete (1:3:6) using 40mm size hard granite C.B metal including hoisting laying using concrete mixture and vibrators including cost of all materials labour T.&P. etc complete and as directed by Engineer - in - charge. |
| 6 | R.C.C. M-25 grade with 20mm and down grade C.B. chips of approved quality from approved quarry including hoisting, laying hire charges of concrete mixture, vibrator, watering, curing and cost of all materials and labour, T&P centering shuttering etc complete but excluding cost of reinforcement complete as per the direction of Engineer-in-charge.Column Base & Footing |
| 7 | Plinth Bend |
| 8 | Floor Beam |
| 9 | Stair case |
| 10 | Lintel Band |
| 11 | Chajja |
| 12 | Shelf |
| 13 | Roof Slab |
| 14 | Providing M.S. reinforcement for R.C.C. work including cutting, bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge and cost and carriage of steel. |
| 15 | Brick work with Fly Ash bricks 25cm x 12cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±2 percent in cement mortar (1:6) in Foundation and Plinth including watering, curing, cost, carriage, royalty and taxes of all materials, cost of all labour, T&P etc complete as per the direction of E.I.C. |
| 16 | Brick work with Fly ash Brick of 25cmx12cmx8cm having crushing strength not less than 75 kg/cm2in cement mortar 1:6 in superstructure including cost conveyance royality and taxes etc.complete. |
| 17 | Brick Masonary with C.m (1:4) in Superstructure using Fly Ash Brick of size 250 x 120 x 80mm,watering curing etc complete for the work. |
| 18 | Supplying,fitting and fixing Vetrified tiles (Coloured/Printed series) in floors,Trades of steps & Landing of size 600mm x 1200mm of approved make confirming to IS 13755 laid on 20mm thick cement morter(1:4) ( 1 cement:4 course sand) and filling joints with white cement of approved quality including cost, conveyance, taxes & royalties of all materials, labour with T&P complete in all respect. |
| 19 | Fixing of Vetrified tiles (Coloured/Printed series) in Dado with with cement morter(1:3) with pigments to match the shade of the tiles, including rubbing & polishing etc. complete including cost, conveyance, taxes & royalties of all materials, labour with T&P complete in all respect |
| 20 | Fixing Granite tiles (0.1 to 0.4 sqm)in floors,treads and landings on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile. |
| 21 | Supplying,fitting and fixing in position well dressed and well seasoned sal wood work framed and fixed (wrought and put up) in choukaths for doors,windows and ventilators with cost ,conveyance,royalties and of all materials with all labour T&P etc. required for the work complete in all respect as per direction of Engineer-in-Charge. |
| 22 | Supplying, fitting and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc. complete as per direction of Engineer-in-Charge. |
| 23 | Supplying & fitting - fixing up of Un-Plasticised Poly Vinyl Choloride (UPVC) (FENESTA) /NCL VEKA LTD ) Three -Track -Three Pannel Sliding Windows -60 - Series dully manufactured proofing of 108mmx45 mm x2.5mm for outer frames and window sash of 39mm x58mm x 2.5 mm capable of mounting single glazing system structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness 1.5 mm prefabricated and welded through fusion welding the window shall be fitted with 6mm thick clear toughened glass of SAINT-GOBIN make duly fitted with EPDM weathering seal resistant and the system is to be installed using Reinforced Large coupler at the site using anchor fasteners , silicon, rubber sealant ,easy glazings /deglazing at site etc including cost and conveyance of all materials , accessories ,labour charges ,materials and product conforming to ASTM D 638-14 EN-477-95 and other applicable codes and standards . |
| 24 | Supplying & fitting - fixing up of Un-Plasticised Poly Vinyl Choloride (UPVC) (FENESTA) /NCL VEKA LTD ) Ventilator /Top Hung -60 - Series dully manufactured proofing of 60mmx55 mm x2.5mm for outer fframes 75mmx60mmx2.25mm for casement window sash profile capable of mounting single glazing system structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness 1.5 mm prefabricated and welded through fusion welding the door sash shall be fitted with 6mm thick clear toughened glass of SAINT-GOBIN make duly fitted with EPDM weathering seal resistant accessories like cliping locking system made of aluminium 1 No per set of sashes and the system is to be installed at the site using anchor fasteners , silicon, rubber sealant ,easy glazings /deglazing at site etc including cost and conveyance of all materials , accessories ,labour charges ,materials and product conforming to ASTM D 638-14 EN-477-95 and other applicable codes and standards . |
| 25 | Supplying M.S Door & Window made out with ms flat , angle of approved design & specification including cost of all materials cost of manufacture, cost of one coat of primer,all taxes T&P etc complete as per the direction of Engineer-in-charge. |
| 26 | Labour for fitting and fixing of MS Shutters for doors,window and grill gates,Collapsible gate including filling the holes with C.C (1:3:6) etc.complete |
| 27 | 12mm thick C.P. in C.M.(1:6) over brick masonary to the smooth surface including watering, curing, cost, carriage, royalty and taxes of all materials, cost of all labour, T&P etc complete as per the direction of E.I.C.( OUT SIDE Plaster) |
| 28 | 16mm thick C.P. in C.M.(1:6) over brick masonary to the smooth surface including watering, curing cost, carriage, royalty, and taxes of all materials, cost of all labour, T&P etc complete as per the direction of E.I.C. |
| 29 | 12mm thick C.P. in C.M.(1:4) over brick masonary to the smooth surface including watering, curing, cost, carriage, royalty and taxes of all materials, cost of all labour, T&P etc complete as per the direction of E.I.C.( OUT SIDE Plaster) |
| 30 | 6mm thick C.P. in C.M.(1:4) to RCC surfaces to the smooth surface including watering, curing cost, carriage, royalty, and taxes of all materials, cost of all labour, T&P etc complete as per the direction of E.I.C. |
| 31 | Finishing plastered surface of wall surface with cement based wall putty (Water based ) & making smooth to recive painting including cost of scaffolding etc. with cost of all materials, labour T&P etc complete as per the direction of Engineer-in charge. |
| 32 | Providing and Painting wall Surface one coat with wall Primer to give an even shed before applying weather coat to Exterior walls including cost of Primer , labour, T&P all comp. |
| 33 | Painting two coats with any approved plastic emulsion paint to interior wall surface including cost of all materials and labour with T&P etc complete in all respect. |
| 34 | Finishing wall surface with two coats of approved quality of weather seal coat of approved shade including cost of all materials etc.complete. |
| 35 | Painting two coats with approved enamel paint over a coat of primer Including cost of all materials etc. complete. |
| 36 | Supplying, fitting afixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost conveyance, taxes of all materials labour, T&P etc. required for the complete in all respect. |
| 37 | Providing and applying anti-termite treatment by drilling holes of 12mm diametre at a distance of 300mm C/C junction of walls and floor about 300mm apart deep enough to raech the soil below and chemical emulsion (PREMISE, MIDACHLOPRIED 30.5 SC OF BAYER make mixed with 475 litre of water) pumped these holes to soak the soil @ 1.00 liter solution of each hole as per manufacture specification and the holes should be plugged with filling materials labour charges conveyence and all taxes, including hire charges of all amchinaries etc. as per direction of Engineer-In-Charge. |
| 38 | FIRST FLOORR.C.C. M-25 grade with 20mm and down grade C.B. chips of approved quality from approved quarry including hoisting, laying hire charges of concrete mixture, vibrator, watering, curing and cost of all materials and labour, T&P centering shuttering etc complete but excluding cost of reinforcement complete as per the direction of Engineer-in-charge.Floor Beam |
| 39 | Stair case |
| 40 | Lintel Band |
| 41 | Chajja |
| 42 | Shelf |
| 43 | Roof Slab |
| 44 | Providing M.S. reinforcement for R.C.C. work including cutting, bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge and cost and carriage of steel. |
| 45 | Brick work with Fly ash Brick of 25cmx12cmx8cm having crushing strength not less than 75 kg/cm2in cement mortar 1:6 in superstructure including cost conveyance royality and taxes etc.complete. |
| 46 | Brick Masonary with C.m (1:4) in Superstructure using Fly Ash Brick of size 250 x 120 x 80mm,watering curing etc complete for the work. |
| 47 | Supplying,fitting and fixing Vetrified tiles (Coloured/Printed series) in floors,Trades of steps & Landing of size 600mm x 1200mm of approved make confirming to IS 13755 laid on 20mm thick cement morter(1:4) ( 1 cement:4 course sand) and filling joints with white cement of approved quality including cost, conveyance, taxes & royalties of all materials, labour with T&P complete in all respect. |
| 48 | Fixing of Vetrified tiles (Coloured/Printed series) in Dado with with cement morter(1:3) with pigments to match the shade of the tiles, including rubbing & polishing etc. complete including cost, conveyance, taxes & royalties of all materials, labour with T&P complete in all respect |
| 49 | Fixing Granite tiles (0.1 to 0.4 sqm)in floors,treads and landings on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile. |
| 50 | Supplying,fitting and fixing in position well dressed and well seasoned sal wood work framed and fixed (wrought and put up) in choukaths for doors,windows and ventilators with cost ,conveyance,royalties and of all materials with all labour T&P etc. required for the work complete in all respect as per direction of Engineer-in-Charge. |
| 51 | Supplying, fitting and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc. complete as per direction of Engineer-in-Charge. |
| 52 | Supplying & fitting - fixing up of Un-Plasticised Poly Vinyl Choloride (UPVC) (FENESTA) /NCL VEKA LTD ) Three -Track -Three Pannel Sliding Windows -60 - Series dully manufactured proofing of 108mmx45 mm x2.5mm for outer frames and window sash of 39mm x58mm x 2.5 mm capable of mounting single glazing system structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness 1.5 mm prefabricated and welded through fusion welding the window shall be fitted with 6mm thick clear toughened glass of SAINT-GOBIN make duly fitted with EPDM weathering seal resistant and the system is to be installed using Reinforced Large coupler at the site using anchor fasteners , silicon, rubber sealant ,easy glazings /deglazing at site etc including cost and conveyance of all materials , accessories ,labour charges ,materials and product conforming to ASTM D 638-14 EN-477-95 and other applicable codes and standards . |
| 53 | Supplying & fitting - fixing up of Un-Plasticised Poly Vinyl Choloride (UPVC) (FENESTA) /NCL VEKA LTD ) Ventilator /Top Hung -60 - Series dully manufactured proofing of 60mmx55 mm x2.5mm for outer fframes 75mmx60mmx2.25mm for casement window sash profile capable of mounting single glazing system structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness 1.5 mm prefabricated and welded through fusion welding the door sash shall be fitted with 6mm thick clear toughened glass of SAINT-GOBIN make duly fitted with EPDM weathering seal resistant accessories like cliping locking system made of aluminium 1 No per set of sashes and the system is to be installed at the site using anchor fasteners , silicon, rubber sealant ,easy glazings /deglazing at site etc including cost and conveyance of all materials , accessories ,labour charges ,materials and product conforming to ASTM D 638-14 EN-477-95 and other applicable codes and standards . |
| 54 | Supplying M.S Door & Window made out with ms flat , angle of approved design & specification including cost of all materials cost of manufacture, cost of one coat of primer,all taxes T&P etc complete as per the direction of Engineer-in-charge. |
| 55 | Labour for fitting and fixing of MS Shutters for doors,window and grill gates,Collapsible gate including filling the holes with C.C (1:3:6) etc.complete. |
| 56 | 12mm thick C.P. in C.M.(1:6) over brick masonary to the smooth surface including watering, curing, cost, carriage, royalty and taxes of all materials, cost of all labour, T&P etc complete as per the direction of E.I.C.( OUT SIDE Plaster) |
| 57 | 16mm thick cement plastering in cement mortor ( 1:6) in finished smooth to surface of brick walls including cost, conveyance, royalties ,taxes of all materials etc complete. |
| 58 | 12mm thick C.P. in C.M.(1:4) over brick masonary to the smooth surface including watering, curing, cost, carriage, royalty and taxes of all materials, cost of all labour, T&P etc complete as per the direction of E.I.C.( OUT SIDE Plaster) |
| 59 | 6mm thick C.P. in C.M.(1:4) to RCC surfaces to the smooth surface including watering, curing cost, carriage, royalty, and taxes of all materials, cost of all labour, T&P etc complete as per the direction of E.I.C. |
| 60 | Finishing plastered surface of wall surface with cement based wall putty (Water based ) & making smooth to recive painting including cost of scaffolding etc. with cost of all materials, labour T&P etc complete as per the direction of Engineer-in charge. |
| 61 | Providing and Painting wall Surface one coat with wall Primer to give an even shed before applying weather coat to Exterior walls including cost of Primer , labour, T&P all comp. |
| 62 | Painting two coats with any approved plastic emulsion paint to interior wall surface including cost of all materials and labour with T&P etc complete in all respect. |
| 63 | Finishing wall surface with two coats of approved quality of weather seal coat of approved shade over a coat of primer including cost of all materials etc.complete. |
| 64 | 2.5cm thick grading concrete (1:2:2) on roof slab with 6mm size hard crusher broken granite chips on new work including watering curing cost of all materials, water-proofing compounds, T.& P. required for the works etc complete. |
| 65 | Painting two coats with approved paint over a coat of primer Including cost of all materials etc. complete. |
| 66 | Supplying, fitting afixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost conveyance, taxes of all materials labour, T&P etc. required for the complete in all respect. |
| 67 | HEAD ROOMR.C.C. M-25 grade with 20mm and down grade C.B. chips of approved quality from approved quarry including hoisting, laying hire charges of concrete mixture, vibrator, watering, curing and cost of all materials and labour, T&P centering shuttering etc complete but excluding cost of reinforcement complete as per the direction of Engineer-in-charge.Floor Beam |
| 68 | Lintel Band |
| 69 | Chajja |
| 70 | Roof Slab |
| 71 | Supplying fitting and placing uncoated HYSD bar reinforcement complete asper drawing and technical specification. |
| 72 | Brick work with Fly ash Brick of 25cmx12cmx8cm having crushing strength not less than 75 kg/cm2in cement mortar 1:6 in superstructure including cost conveyance royality and taxes etc.complete. |
| 73 | 2.5cm thick grading concrete (1:2:2) on roof slab with 6mm size hard crusher broken granite chips on new work including watering curing cost of all materials, water-proofing compounds, T.& P. required for the works etc complete. |
| 74 | Supplying & fitting - fixing up of Un-Plasticised Poly Vinyl Choloride (UPVC) (FENESTA) /NCL VEKA LTD ) Ventilator /Top Hung -60 - Series dully manufactured proofing of 60mmx55 mm x2.5mm for outer fframes 75mmx60mmx2.25mm for casement window sash profile capable of mounting single glazing system structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness 1.5 mm prefabricated and welded through fusion welding the door sash shall be fitted with 6mm thick clear toughened glass of SAINT-GOBIN make duly fitted with EPDM weathering seal resistant accessories like cliping locking system made of aluminium 1 No per set of sashes and the system is to be installed at the site using anchor fasteners , silicon, rubber sealant ,easy glazings /deglazing at site etc including cost and conveyance of all materials , accessories ,labour charges ,materials and product conforming to ASTM D 638-14 EN-477-95 and other applicable codes and standards . |
| 75 | Supplying M.S Door & Window made out with ms flat , angle of approved design & specification including cost of all materials cost of manufacture, cost of one coat of primer,all taxes T&P etc complete as per the direction of Engineer-in-charge. |
| 76 | Labour for fitting and fixing of MS Shutters for doors,window and grill gates,Collapsible gate including filling the holes with C.C (1:3:6) etc. Complete |
| 77 | 12mm thick cement plastering in cement mortor 1:6 in finished smooth surface of brick wall after raking joints including cost, conveyance, royalties ,taxes of all materials etc complete. |
| 78 | 16mm thick cement plastering in cement mortor ( 1:6) in finished smooth to surface of brick walls including cost, conveyance, royalties ,taxes of all materials etc complete. |
| 79 | Finishing plastered surface of wall surface with cement based wall putty (Water based ) & making smooth to recive painting including cost of scaffolding etc. with cost of all materials, labour T&P etc complete as per the direction of Engineer-in charge. |
| 80 | Providing and Painting wall Surface one coat with wall Primer to give an even shed before applying weather coat to Exterior walls including cost of Primer , labour, T&P all comp. |
| 81 | Painting two coats with any approved plastic emulsion paint to interior wall surface including cost of all materials and labour with T&P etc complete in all respect. |
| 82 | Finishing wall surface with two coats of approved quality of weather seal coat of approved shade over a coat of primer including cost of all materials etc.complete. |
| 83 | Painting two coats with approved paint over a coat of primer Including cost of all materials etc. complete. |
| 84 | PLINTH RPOTECTIONEarth work in excavation of foundation in stoney earth & gravels mixed with stone & boulder not exceeding 0.014cum in volume within 50m initial lead and 1.50m initial lift including rough dressing breaking clods to maximum 5cm to 7cm & laying in layers not exceeding .0.3m depth and as per direction of the Engineer-in-Charge |
| 85 | Supplying & filling foundation and plinth with sand well watered and rammed including cost of all materials, T&P etc complete. |
| 86 | Restoration of rain cuts with soil, moorum, gravel or a mixture of these, clearing the loose soil, benching for 300 mm width, laying fresh material in layers not exceeding 250 mm and compacting with plate compactor or power rammers to restore the original alignment, levels and slopes etc complete as per clause-3002 of MoRT&H Specifications for Road & Bridge works (5th Revision). |
| 87 | INTERNAL ROADEarth work in excavation of foundation in stoney earth & gravels mixed with stone & boulder not exceeding 0.014cum in volume within 50m initial lead and 1.50m initial lift including rough dressing breaking clods to maximum 5cm to 7cm & laying in layers not exceeding .0.3m depth and as per direction of the Engineer-in-Charge |
| 88 | Supplying & filling foundation and plinth with sand well watered and rammed including cost of all materials, T&P etc complete. |
| 89 | Cement Concrete (1:3:6) using 40mm size hard granite C.B metal including hoisting laying using concrete mixture and vibrators including cost of all materials labour T.&P. etc complete and as directed by Engineer - in - charge. |
| 90 | C.C. (1:2:4) with 12mm and down grade C.B. chips approved quality from approved quarry including hoisting, laying hire charges of concrete mixture, vibrator, watering, curing and including cost, carriage, royalty, cost of all labour T.&P. etc complete and as directed by E.I.C. |
| 91 | Construction of granular sub-base by providing Gr.-VI material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller. |
| 92 | Supplying & fixing of 80mm thick concrete'I' Block on 25mm thick bed of CM(1:1) jointed with heat slurry mixed with pigmants to mathch shed of Block |
| 93 | DISMANTLING OF OLD STRUCTURESDismantling and removing doors, windows and ventilators including removal of frame, hinges, fastening and stacking the same for reuse and removing the debris within 50m lead. |
| 94 | Dismantaling and removing RCC Chajja, Shelves,fins and parapet including stacking the useful materials for re-use and removing the debris with in 50m lead including cost of all labour with T&P etc. Complete |
| 95 | Dismantaling & Removing 2.5cm thick artificial stone flooring including stacking the useful materials for re-use and removing the debris with in 50m lead including cost of all labour with T&P etc. Complete |
| 96 | Dismantling and removing R.C.C. columns, beams, slab, staircase, landing and lintels including stacking the useful materials for reuse and removing the debris within 50m lead |
| 97 | Dismantling brick or stone masonry in clay under 3mtr height including stacking the useful materials for reuse and removing the debris within 50m lead. |
| 98 | Dismantaling 2.5cm thick Grading Concrete from roof top including stacking the useful materials for re-use and removing the debris with in 50m lead including cost of all labour with T&P etc. Complete |
| 99 | Transporting of dismantled debris by mechanical means within 5.00 km lead |
| 100 | Compound WallEarth work excavation in foundation in all kinds of soil within 50 m initial lead & 1.5 m initial lift including rough dressing & breaking clods to maximum 5 cm to 7 cm & laying in layers not exceeding 0.3 m in depth & as per the direction of the Engineer-in-charge. |
| 101 | Supplying, filling in foundation and plinth with sand in layers not exceeding 23cum (9\\") thick including watering and ramming with the cost, conveyance, royality, taxes of all materials, labour, T & P required for the Work etc. complete as per specification and direction of the Engineer-in-Charge. |
| 102 | Cement Concrete of proportion (1:3:6) in foundation and floors using 4cm (3/2\\") size clean hard black broken granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15cm(6\\") thick to the required level ramming watering and curring etc. complete including cost and conveyance of all materials with all taxes and royalities and all labour with T & P required for the work etc. complete including dewatering if required as per specification and direction of the Engineer-in-Charge. |
| 103 | Flyash brick masonry in C.M. (1:6) using brick of size 23cmx11cmx 8cm of crushing strength not less than 75kg/cm2 with dimentional tolerance plus minus 8% after immersing the bricks for six hours befour use incl.lowering, placing in position, watering and curing and cost, conveyance, royalties and taxes of all materials, cost of labour & T&P etc. complete as per the direction of E.I.C..(For foundation & plinth), etc all complete. |
| 104 | lyash brick masonry in C.M. (1:6) using brick of size 23cmx11cmx 8cm of crushing strength not less than 75kg/cm2 with dimentional tolerance plus minus 8% after immersing the bricks for six hours befour use incl.lowering, placing in position, watering and curing and cost, conveyance, royalties and taxes of all materials, cost of labour & T&P etc. complete as per the direction of E.I.C..(For foundation & plinth), etc all complete. |
| 105 | Cement concrete (1:2:4) using 12mm hard granite crusher broken metal including all cost , carriage, royality, taxes, and all labour involved for completion of item of work as per the direction of Engineer- in - charge. |
| 106 | R.C.C. work of M-25 grade with 20 mm and down grade HGCB chips incl. hoisting, laying concrete in layers not exc. 15cm thick, compacting by means of vibrator, curing,finishing the exposed surface smooth, dewatering, shoring, shuttering if necessary at the time of laying concrete with cost, conveyance, royalty & taxes of all materials, cost of labour and T&p etc. all complete as per the direction of E.I.CColumn Base & Footing |
| 107 | Plinth Beam |
| 108 | Column |
| 109 | Straightening bent up or coiled rods cutting bending, cranking, hooking, welding or jointing (if required) the M.S. Rods or Tor steel and binding wires and tying the grills hoisting lowering and placing in proper position as required for RCC works with cost, conveyance and taxes of M.S. Rods or Tor steel and binding wires of 18 to 20 gauge and labour with all T&P required for the work etc. complete in all respect as per specification and direction of the Engineer-in-Charge. (Weight of binding wires will not be considered for payment and payment will be made on weight of M.S. Rods or Tor steel only). Ground Floor |
| 110 | Ground FloorMain Gate |
| 111 | 16mm thick cement plaster (1:8),finished smooth to stone work after cleaning the surface incl.watering, curing etc. complete with cost, conveyance, royalties & taxes of all materials, labour and T&P etc complete as per the direction of E.I.C |
| 112 | Priming one coat with any approved primer over plastered surface as per direction of the Engineer-in-charge. |
| 113 | Finishing walls with weather coat of approved shade on new work two coats to give an even shade including cost of paint. |
| 114 | Painting two coats of enamel paint to new wood work and iron work including cost of paint, sand papering polishing the surface with cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per specification and direction of the Engineer-in-Charge. |
| 115 | PH WORK10 User septic tankEarthwork in all kinds of soil in excavation of foundation trenches within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth etc all complete as per direction of the E.I.C. Initial lift upto 1.5 mtr 3.04 m x 1.94 m x 1.50 m=8.846 cum |
| 116 | From 1.5 mtr to 3.0 mtr depth 3.04 m x 1.94 m x 0.70 m=4.128 cum |
| 117 | Supplying all materials, labour, T&P and filling in foundation and plinth with river sand well watered and rammed including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per the direction of the E.I.C. 3.04 m x 1.94 m x 0.15 m=0.884 cum |
| 118 | Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 40mm H.G metal including watering, curing and conveyance of all materials to site payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. 3.04 m x 1.94 m x 0.15 m=0.884 cum |
| 119 | Supplying all materials, labour, T&P and providing plain cement concrete (1:1.5:3) with 12mm size H.G chips including watering, curing and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.3.04 m x 1.94 m x 0.10 m=0.589 cum + 2.04 m x 0.94 m x 0.038 m = 0.072 Cum |
| 120 | Supplying all materials,labour, T&P and providing Brick work with K.B.Brick having crushing strength not less than 75 Kg/CM2 with dimensional tolerence of +/- 8% in C.M including watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.In Foundation and Plinth in C:M (1:4) 2 x ( 2.74 + 0.94 ) m x 0.35 m x 1.10 m = 2.833 cum + 2 x ( 2.50 + 0.94 ) m x 0.23 m x 0.80 m = 1.265 cum + 2 x ( 2.50 + 0.94 ) m x 0.23 m x 0.80 m = 1.265 cum |
| 121 | In Foundation and Plinth in C:M (1:6)1 x 0.40 m x 0.40 m x 0.60 m = 0.096 cum |
| 122 | Supplying all materials, labour, T&P and providing cement plaster on brick/stone work including watering,curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. 12 mm thick C.P in C:M (1:3) 2 x ( 2.04 + 0.94 ) m x 1.90 m =11.324sqm + 2.04 x 0.94 m = 1.917 sqm+ 4 x 0.40 x 0.60 m = 0.96 sqm |
| 123 | Supplying all materials, labour, T&P and providing cement punning on plastered surface including watering,curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.Same as above item 20mm C.P in 1:3 |
| 124 | Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling them after casting including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.2 x ( 2.50 + 1.40 ) m x 0.10 m = 0.78 sqm + 2.04 x 0.94 m = 1.917 sqm |
| 125 | Supplying all materials, labour, T&P and providing M.S.reinforcements for RCC work including cutting, bending, binding, straightening and tying the grills and placing in position including cost of binding wire 18 to 20 gauge conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 126 | Supplying all materials, labour, T&P and providing Reinforced cement concrete (1:1.5:3) with 12mm size H.G chips including watering, curing and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.2.50 m x 1.40 m x 0.10 m=0.35 cum |
| 127 | Supplying all materials, labour, T&P and making M.S. Step Iron in 8mm Dia M.S Steel bars and fixing into walls of Manhole/ Septic Tanks duly embeded in C.C(1:2:4) etc all complete as per P.H specification and direction of the E.I.C. |
| 128 | Supplying all materials, labour, T&P and providing 50mm thick pre-cast R.C.C. baffle wall in R.C.C(1:1.5:3) including reinforcement cage using 12mm size HG chips fitted and fixed in position, finished smooth etc. complete including cutting grooves and mending good the damages etc all complete as per P.H specification and direction of the E.I.C.1.15 m x 0.45 m |
| 129 | Supplying all materials, labour, T&P and providing 160mm dia P.V.C Tee inside the septic tank including cutting holes and duly embeded in P.C.C(1:1.5:3) using 12mm size HG chips fitted and fixed in position and mending good the damages etc all complete as per P.H specification and direction of the E.I.C. |
| 130 | Supplying all materials, labour,T&P and providing 12mm thick cement flush pointing in C:M (1:3) to Brick Masonry works including watering curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. 2 x ( 2.74 + 1.64 ) m x 1.10 m = 9.636 Sqm + 2 x ( 2.50 + 1.40 ) m x 0.80 m = 6.24 Sqm + 2 x ( 2.74 + 1.40 ) m x 0.12 m = 0.993 Sqm |
| 131 | Supplying all materials, labour,T&P and filling Foundation and Plinth with excavated earth including watering, ramming etc all complete as per direction of the E.I.C. |
| 132 | Supplying all materials, labour, T&P and fixing porcelain glazed tiles in floors, on 25mm thick bed of cement mortar 1:1 joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. all complete as per specification and direction of the E.I.C.G.F- Toillet-1 x 2.15m x 1.24=2.66sqm+ 1x 2.43m x 1.20 = 2.91 sqm+ Kitchen plate-1 x 2.04 x 0.60m=1.22 sqm + 2 x 0.75 x 0.30= 0.45 sqm total= 12.85 sqm |
| 133 | F.F=Toillet-1 x 2.15m x 1.24=2.66sqm+ 1x 2.43m x 1.20 = 2.91 sqm+ Kitchen plate-1 x 2.04 x 0.60m=1.22 sqm + 2 x 0.75 x 0.30= 0.45 sqm total=12.85 sqm |
| 134 | Supplying all materials, labour, T&P and fixing porcelain glazed tiles in dados/skirtings on 12mm thick cement plaster (1:3) joined with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing etc. all complete as per direction of the E.I.C. G.F 1 x 6.18m x 1.50m=9.27 sqm + 1 x 6.66m x 1.50m= 9.99 sqm + 1 x 2.04m x 0.90 =1.83 sqm |
| 135 | F.F- 1 x 6.18m x 1.50m=9.27 sqm + 1 x 6.66m x 1.50m= 9.99 sqm + 1 x 2.04m x 0.90 =1.83 sqm |
| 136 | Water supply/supplying all materials, labour, T&P and cutting holes through existing brick/stone masonry walls for taking GI/PVC pipes and fittings including making good the damages in cement mortar (1:4) etc. all complete as per P.H. specification and direction of E.I.C. R.C.C Roof/Chaja |
| 137 | Cutting hole(250 mm wall) |
| 138 | Cutting hole(375 mm wall) |
| 139 | Supplying all materials, labour, T&P and Fitting and Fixing of Rotational moulded polythene cylindrical vertical water storage tank conforming to 15701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jamnuts, including hoisting upto a height of 5 mtr above G.Land placing the tank in required position including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. 1000 lits capacity on the roof of FF |
| 140 | Supplying all materials, labour, T&P and construction of masonry staging with providing 1st class K.B. Brick work in C.M.(1:6) of 0.46mtr height in staging, 12 mm cement plaster in C.M (1:6), R.C.C. Beam of 0.25mx0.30mx2.60m & roof slab of 1.40mx1.40m in C.C (1:1.5:3) using 12mm size H.G.Chips including centering, shuttering, bending and binding of rod etc watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. 1000 lits capacity on the roof of FF |
| 141 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling or floor G.I./PVC pipes and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling,and floor, testing all complete as per specification and the direction of the E.I.C. 20mm dia CPVC pipes Internal |
| 142 | 25mm dia CPVC pipes External |
| 143 | Supplying all materials, labour, T&P and fitting and fixing Brass/CP fittings(Amber/plaza) of the following nominal bore with supply of all jointing materials etc. all complete as per specification and the direction of the E.I.C. 15mm dia CP Bib Cock SB |
| 144 | 15mm dia CP Bib Cock LB |
| 145 | 15mm dia CP Two way Bib Cock |
| 146 | 15mm dia CP Health faucet |
| 147 | 15mm dia CP Pillar Cock |
| 148 | 15mm dia CP Angle Stop Cock |
| 149 | 15mm dia CP Concealed Stop Cock |
| 150 | 15mm dia CP Flange |
| 151 | 15 mm C.P Extension piece 50 mm long |
| 152 | 25mm dia Brass Full Way Valve |
| 153 | Supplying all materials, labour T&P and fitting and fixing of C.P Shower(Parryware,Hindware) with 15mm or 20mm inlet with C.P Shower arm including polishing etc all complete as per specification and direction of the E.I.C 15 mm x 150mm dia C.P Shower with arm |
| 154 | Supplying all materials, labour T&P and fitting & fixing 10 Litres capacity low level cistern with a pair of cast iron of m.s. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float, c.p. brass handle, unions and couplings for connection with inlet, outlet and overflow pipe. 32 mm C.P flush bend 15mm PVC inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main etc. all complete as per specification and direction of E.I.C (Cerra/ Parry ware/ Hindware) |
| 155 | SanitaryInstalation/Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing etc all complete as per P.H specification and direction of the E.I.C. 110mm diameter U-PVC SWR pipes |
| 156 | 110mm U-PVC SWR P-trap |
| 157 | 110mm U-PVC SWR Single junction door |
| 158 | 110mm U-PVC SWR door bend |
| 159 | 110mm U-PVC SWR Offset |
| 160 | 110mm U-PVC SWR vent cowl |
| 161 | 75 mm diameter U-PVC SWR pipes |
| 162 | 75mm U-PVC SWR Door bend |
| 163 | 75mm dia U-PVC Plain Tee |
| 164 | 75mm U-PVC Plain Bend |
| 165 | 125 mm dia C.P Grating |
| 166 | Supplying all materials, labour, T&P and fixing wash down water closet(E.W.C) with integral 'S' or 'P' trap to the floor with wooden plug and C.P screw including jointing the trap with soil waste pipe in C.M(1:1) etc all complete as per specification and direction of the E.I.C. |
| 167 | Supplying all materials, labour, T&P and fixing of plastic seat cover for E.W.C with chromium plated brass hinges and rubber buffer etc all complete as per specification and direction of the E.I.C. |
| 168 | Supplying all materials, labour T&P and fixing wash basins(Hindware,Parryware) with C.I. or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the E.I.C. WHB 500mm x 400 mm |
| 169 | Supplying all materials, labour, T&P and fixing Glass Mirror 600mmx450mm size B.E mirror (fixed type) complete as per specification and direction of the E.I.C. |
| 170 | Supplying all materials,labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the E.I.C 20mmx450mm long CP towel rail |
| 171 | CP towel ring |
| 172 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the E.I.C |
| 173 | Supplying all materials, labour, T&P and fixing wash kitchen sink/laboratory sink with C.I/M.S brackets paintedwhite including holes in walls and making good the damages etc all complete as per specification and direction of the E.I.C. 550x450x250 mm Stainlessstell Kitchen Sink |
| 174 | Supplying all materials, labour, T&P and constructing Gully Trap chamber of the following inside size with 8 cm thick precast cover slab in CC (1:2:4) mix using 12 mm size H.G chips, foundation concrete (1:4:8) using 40 mm size HG metal on bed and around trap , !st class KB Brick work in CM (1:6) in F & P and inside 12 mm thick cement plaster (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap 150mmx150mm size C.I grating etc. all completed as per approved drawing, specification and direction of E.I.C. |
| 175 | Supplying all materials, labour, T&P and constructing Inspection Chamber of the following sizes with cement concrete (1:3:6) using 40 mm size HG metal on bed, 1st class KB Brick work in CM (1:6) moulding and shaping the channel inside and benching with C:C (1:1.5:3) using 12 mm size H.G chips, 12 mm thick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in C.C(1:1.5:3) using 12 mm size H.G chips with RCC man hole cover, etc. all complete as per approved specification and direction of E.I.C Inside size 760mm x 760mm x 460mm |
| 176 | Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and 1st class KB brick work in CM (1:6) for the remaining height at top, 12mm thick Cement Plaster (1:4) inside and outside over masonry brick work, gravel packing in the rear of well steining, RCC cover slab in CC (1:1.5:3) using 12mm HG chips, fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per approved specification and direction of the E.I.C. 0.90m dia x 2.00m deep soak way pit |
| 177 | Supplying all materials, labour, T&P and constructing soakway pit of the following size RCC cover slab in CC (1:1.5:3) using 12mm HG chips, fitted with iron lifting handles. etc all complete as per approved specification and direction of the E.I.C. 1.20 m diax 2.0 m deep RCC soakway pit |
| 178 | Supplying all materials, labour, T&P and laying in trenches U-PVC SWR/4kg/cm2 soil waste ventilating pipes for sewer line of following dia in trenches (to slope or level)and jointing with supply of approved solvent cement by non-heat application method C.C (1:3:6) using 40mm size hard granite metal on bed of the trenches and all round concrete encashing with C:C (1:4:8) using 40 mm size H.G. metal, etc. all complete as per approved drawing, specification and direction of the E.I.C. |
| 179 | Factory made FRP(alternately called GRP) door frame of size 75mmx100mm fabricated using E-glass Chopped Strand Mat (CSM) U.V stabilised Inopthalic Gelcoat and impregnated with Inopthalic resin. The thickness of the GRP skins shall not be less than 2.00mm. The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The GRP frame shall be provided with wooden reinforcement on six locations for high screw holding capacity for for fixing metallic hold fast and shall be consolidated by filling with medium density foam/plaster of paris with fibre reinforcement, Six numbers of 260mm x 25mm x 5mm size 'S' shaped M.S flat hold fast shall be provided with the frame. The material and process for manufacturing the door frames shall conform to RV-TIFAC composites Design Centre's standards and specifications. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the E.I.C 4x (0.75m + 2.0m + 2.0m) = 19.0 mtr |
| 180 | Factory made single leaf rigid FRP(alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gelcoat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic palyester resin. The thickness of the skins shall not be less than 1.50mm Expanded Polystyrone(EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reiforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour white/ Ivory/ Beige/Light grey/ Mahogany/Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter. 4 x 0.72 x 1.95m=5.616 |
| 181 | Supplying and fitting & fixing of I.S.I make 1.0 H.P single phase Submersible Pump set to give discharge of 3000 ltr/hour at a head of 40 mtr etc all complete as direction of EIC. |
| 182 | Supplying all labour,T&P and fitting & fixing of I.S.I make 1.00 H.P single phase Submersible Pump set with commissioning and testing etc all complete as direction of EIC. |
| 183 | Supplying and fitting & fixing of D.O.L starter for 1.0 H.P single phase Submersible Pump etc all complete as per direction of Engineer-in-charge. |
| 184 | Supplying and fitting & fixing of suitable cable and connecting the pump and starter etc all complete as per direction of Engineer-in-charge. |
| 185 | Supplying and fitting & fixing of Plastic rope, M.S well cover, M.S clamp, etc all complete as per direction of Engineer-in-charge. |
| 186 | Supplying and fitting & fixing of HDPE pipes and pipe fittings with C.P Nippling and lowering to bore well, making connection to pumpset & testing etc all complete as per specification and the direction of the E.I.C.32mm dia HDPE pipes |
| 187 | Labour for drilling a perfectly vertical bore hole at specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rigs or combination rigs as required to suit the site condition as per the direction of the Engineer-in-charge including use of own rigs with its accessories, tools and plants and consumables etc for lowering of 125 mm dia P.V.C/G.I/MS pipes for housing fitted socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/P.V.C/M.S casing pipes if required to prevent collapse of over burden is to be provided by the contractor including lowering and withdrawing after completion of the tubewell) Drilling of 125mm dia bore :-00 mtr to 30.00 mtr |
| 188 | Drilling of 100mm dia bore :-30.01 mtr to 80.00 mtr |
| 189 | Lowering of the following size G.I/P.V.C pipes with or without slotted pipes as per the necessary from ground level upto 30 mtrs depth and fitted and fixed up in perfectly vertical position including cutting and threading pipes and slotted pipe and supplying and fixing all jointing materials, tools and plants complete and keeping the top of the casing pipe threaded including plugging tubewell to prevent entry of foreign materials from above. Lowering of 125 mm dia PVC pipes :- 00mtr to 30.00 mtr |
| 190 | Cost of 125 mm dia PVC pipes :- 00mtr to 30.30 mtr |
| 191 | Cleaning and developing the tube well using their own compressor continuously worked till clean and adequate discharge is obtained from the tubewell including supply and use of all necessary equipments and labour as per the direction of Engineer-in-charge. |
| 192 | ELECTRICAL WORKRecessed wiring to Light point/Exhaust Fan Point with 1.5 sqmm, FR PVC Insulated single core multistrand copper conductor of ISI marked with 20 mm dia non- metallic PVC flexible conduct with 5 Amp, 250 V Modular type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size,MS box with 1.5 sqmm FR PVC insulated single core multistrand copper conductor and earth wire incouding all accessories and connection as per direction of engineer in charge (Make of wire = Finolex/L&T/ Anchor/ V-Guard) deducting the cost of 2M Box with cover Plate-1 No.) Group A 1.2.1-1.24.2 |
| 193 | do-………Group B 1.2.2 - 1.24.2 |
| 194 | do-………. Group C 1.2.3 - 1.24.2 |
| 195 | Recessed wiring to Fan point in Group B 1.2.2 - 1.24.2 |
| 196 | do-………. Group C 1.2.3 - 1.24.2 |
| 197 | Recessed wiring to Callbell point in Group C 1.2.3 - 1.24.2 |
| 198 | Wiring for twin control light/fan point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in recess PVC conduit with 2 way piano type modular switch with suitable modular base & cover and earthing point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc as required. ( Make of wire -Finolex / L&T / Anchor / Havels /Vguard) |
| 199 | S/F of Extension board of 6 modular Metal box with modular base & cover in recess including providing and fixing of 2 nos of 3pin 5/6amp modular socket out let & 2 nos of 5/6 amp piano type modular switch, connection, painting etc as required. |
| 200 | S/F of 5/6 Modular Switch & 3pin 5/6A Modular Socket on existing board (1.25.1+1.25.4) |
| 201 | S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 6 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required for water pump supply(1.27) |
| 202 | S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 6 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required |
| 203 | S/F of Power point with 4 modular & 2 modular metal box with modular base & cover in recess including providing and fixing of 32A DP Modular Switch with neon Indicator & 5 pin 15/16 amp. piano type Modular Socket & Mini DP MCB, connection, painting etc as required for AC |
| 204 | S/F of Invertor board consisting of 2 nos. of 15 amp Modular plug and switch and 10 amp SP MCB complete with wiring on 8M GI box with Front cover(1.24.9 + 1.25.1+ 1.25.4 +2.6.1) |
| 205 | S/F to 16/18 SWG Modular GI box of following sizes (normal sixe) in recess with suitable size of Modular Base & Cover in front including cutting the wall and making good the same in case of recessed conduit as required.for 2 Module(1.24.1) |
| 206 | do-6 Module |
| 207 | do-8 Module |
| 208 | do-12 Module |
| 209 | Wiring for circuit/sub main alongwith earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20 mm dia non metallic heacy duty flexible conduit 1.6 mm in recessed PVC conduit as required (make of wire-Finolex/L&T/Anchor/Havels/V-Guard).2x1.5 sqmm + 1 x 1.5 sqmm( 1 .8) |
| 210 | do- 2 x 2.5 sqmm + 1 x 1.5 sqmm (1.8.2) |
| 211 | do- 2x4 sqmm + 1 x 1.5 sqmm (1.8.3) |
| 212 | do- 2x6 sqmm + 1 x 2.5 sqmm (1.8.3) |
| 213 | Inverter wiring (1x1.5smm) Copper wire (1.19.1) |
| 214 | S/F of 5 to 32 Amp rating 240 Volt \\"B\\" series MCB for lighting and other loads in the existing MCB Distribution Board ISI marked complete with connection, testing and commissioning etc. as required (2.6.1) |
| 215 | S/F of 'B/C/D' series DP MCB of 5 - 32A amp rating (As per direction of engineer in charge) 240Volt for lighting and other loads in the 2 Way double door MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required (2.6.2a)+(2.3.1b) |
| 216 | Supply and fixing of following size MCB box with sheet steel enclosure, distribution board, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland /plate, interconnection, phosphate and powder painted including earthing etc. as required ( But without MCB/ RCCB/ ISOLATOR) . 8 way Double door (2.3.6) |
| 217 | Supply & fixing of 63A Panel board 1. 63A 2P MCCB (Make- Legrand/Seimens/L&T/C&S/)-1no 2. 40KA SPN SPD (Make- Legrand/Seimens/L&T/C&S/)-1no3. 40A(5-300)A RCCB (Make- Legrand/Seimens/L&T/C&S/)-1no4. Copper Busbar5. Indicating Lamp with Toggle Switch 6. All accesories & Connection (Rating & Danger borad) |
| 218 | S/F of batten holder BK angle holder ISI marked including connection etc. instead of ceiling rose(1.29- 1.28) |
| 219 | S/F of 9W LED Bulb |
| 220 | Earthing with G.I. Earth pipe 3 mtr Long 40mm dia ISI marked including accessories & providing masonary enclosure with cover plate having locking arrangement & watering pipe with charcoal & salt as required (3.2) |
| 221 | Supply andlaying 8 SWG copper wire in recess for loop earthing as required (3.18) |
| 222 | Supply and fixing of 1200mm A.C. Ceiling fan (1 star) with all accessories and connections with out fan regulator (Make:Usha-Striker neo HS/Crompton- Highspeed/Havells-Samrat ES/Anchor- Turbo Speed Star/Orient-Summer Breeze Pro/ Great White - Aldous/ Pollycab - Vital HS ) |
| 223 | S/F step type modular fan regulator |
| 224 | Supply and fixing of 300mm Exhust fan with all accessories and connections (Make:Usha-Aero Clean Plus DBB/Crompton- Trans Air 12\\" reversiable /Havells-Venti Air DS (HS)/Anchor- Anmol delus R/Orient-Power Flow DBB// Pollycab -Fresh on DBB ) |
| 225 | S/F of 18-25 watt LED Tube light fitting including necessary connection, Make-( Crompton/HPL/Polycab/Havells/PAC) |
| 226 | S/F of 9 Watt foot LED light(Crompton/Havels/Bajaj) |
| 227 | Supply, Installation, Testing and commissioning of bulkhead fittings including fixing of 5 watt LED Lamp(Make:Havels with die cast aluminium housing and frosted glass cover).RUGBY |
| 228 | S/F of Fan hook S, Type on ceiling.(M-22) |
| 229 | S/F of computer board consisting of 3 nos of 5amp modular plug and modular switch & 1 no of Mini MCB complete with wiring on 12 modular M.S. box with modular cover. |
| 230 | S/F Call bell/Buzzer ISI marked suitable for DC/AC single Phase 230 volts complete as required.(1.30) |
| 231 | 900VA/12V Invertor machine (Make- Microtek(Super power new 1100)/V-Guard(SMART 1100)/Luminous(ZELIO SMART 1100) and 180Ah tall tubular BatteryMake-Luminous and 16A Delux plug Top with Luminous single Trolley for Invertor Battery. |
| 232 | Supply and fixing of 45-48 Watt Single LED Street Light Fitting with LED & Electronic driver with all accessories and connections ( Make- Crompton/Phillips/HPL/Polycab/Havells ) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysSep 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender