Tender For Renovation Of 16 Nos. A-Type Quarters (C-Block) And 24 Nos. B-Type Quarters (A-Block) At Power House Colony At Ganguwal.
Tender Value
71.81 Lakhs
Estimated cost
Bid Submission
05 Oct 2026
22 days left
EMD
1.43 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Rupnagar → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of 16 Nos. A-Type Quarters (C-Block) And 24 Nos. B-Type Quarters (A-Block) At Power House Colony At Ganguwal.
BOQ
| Sl. No. | Item Description |
| 1 | Scraping of cement plaster(Ref of CSR-8.31-c) |
| 2 | Nicking cement concrete surface (Over 28 days old including preparation and laying slurry).(Ref of CSR-10.31) |
| 3 | Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete white cement slurry in joints including corners angles and beading.(Ref of CSR-14.72) |
| 4 | Providing and laying vitrified floor tiles of different sizes in light colour shades made using Double Charge technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete.(a) Size 600x600 mm(Ref of CSR-14.113-a) |
| 5 | Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 450 x 310 mm as approved by Engineer-inCharge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.(Ref of CSR-14.127) |
| 6 | Black Granite stone tiles 15 to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps.(Ref of CSR-14.87) |
| 7 | Removing, resizing and re-fixing of doors shutters.(AOR-I) |
| 8 | 12.5 mm thick cement plaster 1:5(Ref of CSR-15.10) |
| 9 | Dismantling sanitary Fixtures such as Europeon/Indian/Orissa W.C PVC/China ware cistern, wash hand basin, Urinal Port, Sinks ans CP fiitng and Disposal of dismantled material with in distance of 100 mtr complete in all respect as required by Engineer-in-charge. |
| 10 | (a) European/Indian/Orissa W.C(Ref of CSR-30.88-a) |
| 11 | (b) PVC/ China ware cistern(Ref of CSR-30.88-b) |
| 12 | (c) Wash Hand Basin / Urinal Pot(Ref of CSR-30.88-c) |
| 13 | (e) CP Bib Cock/ Angle Cock/ Stop Cock/ Shower/ Bottle Trap(Ref of CSR-30.88-e) |
| 14 | Providing and laying, jointing, fixing, and testing ISI Marked G.I Pipe (as per IS 1239) B- Class, premium make such as (Jindal Hissar) including cost of specials (Such as tees, bends, socket elbow etc.) painting with anticorrosive bitumastic paint, testing, cutting, threading inside building complete.(a) 15mm i/d(Ref of CSR-28.35-a) |
| 15 | Providing and laying, jointing, fixing, and testing ISI Marked G.I Pipe (as per IS 1239) B- Class, premium make such as (Jindal Hissar) including cost of specials (Such as tees, bends, socket elbow etc.) painting with anticorrosive bitumastic paint, testing, cutting, threading inside building complete.(b) 20 mm i/d(Ref of CSR-28.35-b) |
| 16 | Providing and fixing in position Chinaware European type water Closet with P trap or S trap of approved make (to the approval of Engineer-in-charge) with 10 Litr PVC flushing cistern PVC short bend 32mm dia including seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge. (Make such as Cera, Hinware, Parryware, Jaguar & Kohler etc.)(Ref of CSR-30.4) |
| 17 | Providing and fixing jet spray with 2'-6\\" long PVC pipe.a. With C.P Brass nut(Ref of CSR-30.8-a) |
| 18 | Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) including Rack Bolt Screw Pair 115mm long without CP fittings complete in all respect.(ii) Size 550 mm x 400 mm x 815 mm (Make such as Cera, Hinware, Parryware, Jaguar & Kohler etc.)(Ref of CSR-30.31-ii) |
| 19 | Providing & fixing in position 5 mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hardboard backing fixed in with rawl plugs 50mm, C.P brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in-charge).(a) Size 600mmx450mm(Ref of CSR-30.61-a) |
| 20 | Providing & fixing in position C.P/Aluminium khunti of approved make (to the approval of Engineer-in-charge) fixed into wall with C. P. brass screws and rawl plugs etc. complete in all respects.(b) C.P. Brass khunti with 4 pegs(Ref of CSR-30.63-b) |
| 21 | Providing and fixing in position premium range C.P brass fitting and accessories of approved make (to the approval of Engineer-in-charge) complete in all respect) (Make such as Cera, Hinware, Parryware, Jaguar & Kohler etc.)(A) CP Brass fittings |
| 22 | C.P Brass Bib cock with wall flange(Ref of CSR-30.69-A-ii) |
| 23 | C.P. brass 15mm Angular stop cock with Wall flange(Ref of CSR-30.69-A-iii) |
| 24 | C.P brass Sink mixer with regular spout table mounted with 450mm long flexible hose.(Ref of CSR-30.69-A-viii) |
| 25 | Providing and fixing in position C.P. brass overhead shower 1 flow with shower arm with 15mm i/d inlet of approved make (to the approval of Engineer-in-charge) complete in all respect.(Ref of CSR-30.56-A) |
| 26 | Providing and fixing in position premium range C.P brass fitting and accessories of approved make (to the approval of Engineer-in-charge) complete in all respect)(B) C.P Brass accessories |
| 27 | (i) C.P. brass towel rail 600 mm long(Ref of CSR-30.69-B-i) |
| 28 | (iii) C.P. brass soap dish holder with glass dish(Ref of CSR-30.69-B-iii) |
| 29 | Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge) complete in all respect.(b) PVC tube connection of size 15 mm x 450 mm with C.P. Brass nut(Ref of CSR-30.72-b) |
| 30 | Providing and fixing H.C.I. Floor traps conforming to I.S.I. Specification of reputed firm of the self cleaning design with S.S. grating with frame with or without vent arm and including cement concrete 1:2:4 under and around the floor trap where required upto floor level complete in all respects including cutting and making good the walls and floors etc.(b) With 100mm x 75mm i/d Floor Trap (weighing 5.8 Kg)(Ref of CSR-30.79-b) |
| 31 | Cutting chase in brick walls in cement or in floor for embedding G.I or C.I pipes line and making good the same to its original condition.(a) Size 75 mm x 75 mm(Ref of CSR-30.85-a) |
| 32 | Cutting chase in brick walls in cement or in floor for embedding G.I orr C.I pipes line and making good the same to its original condition.(d) Size 225mm X 225mm(Ref of CSR-30.85-d) |
| 33 | Providing and fixing P.V.C Waste Pipe Collapsible 32mm complete in all respect.(Ref of CSR-30.20) |
| 34 | Providing and fixing in position automatic brass ball cock in tanks.(b) Brass ball cock with rod and plastic ball(i) 15mm i/d.(Ref of CSR-30.96-B (i)) |
| 35 | Providing and fixing and jointing brass ball valves screwed with SS/Brass ball/Spindle and Teflon seats on G.I Pipes lins including all carriages complete(a) 15mm i/d Brass Ball valves(Ref of CSR-28.44-a) |
| 36 | Providing & placing in position on terrace (at all floor level) HDPE Water Storage Tank of approved make (to the approval of Engineer-in-Charge) with cover with suitable locking arrangement and making necessary holes for inlet, outle ant over flow pipe but without fitting and support for tank.(i)Triple layer tank(Ref of CSR-30.97-A-i) |
| 37 | Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing.iii- (B) B-type - (b) 110mm o/d SWR UPVC pipe line laid complete.(Ref of CSR-30.74-iii-B-b) |
| 38 | Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing.iii- (B) B-type - (b) 75mm o/d SWR UPVC pipe line laid complete.(Ref of CSR-30.74-iii-B-d) |
| 39 | Providing, fixing and jointing G.I Union Couplings (of approved make with the approval EIC) as per IS 1879 in G.I. Pipe lines complete in all respect.(a) 15mm i/d G.I. Union(Ref of CSR-28.40-a) |
| 40 | Providing, fixing and jointing G.I Union Couplings (of approved make with the approval EIC) as per IS 1879 in G.I. Pipe lines complete in all respect.(b) 20mm i/d G.I. Union(Ref of CSR-28.40-b) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 22 daysOct 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender