Tender For Dismantling Brick Wall, Aluminium Glaged Partition, False Ceiling & Glass Wood And Maximum Possible Utilisation Of Available Dismantled Bricks /Brick Bats And Betterment By Rectification Of Gf & 1St Floor Toilet In Te Building At Godda Und
Tender Value
Ref. Documents
Estimated cost
Bid Submission
16 Sep 2026
2 days left
EMD
6498
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Godda → Jharkhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Dismantling Brick Wall, Aluminium Glaged Partition, False Ceiling & Glass Wood And Maximum Possible Utilisation Of Available Dismantled Bricks /Brick Bats And Betterment By Rectification Of Gf & 1St Floor Toilet In Te Building At Godda Under Dumka Oa ( Dhanbad -Ba)
BOQ
| Sl. No. | Item Description |
| 1 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. |
| 2 | Cement mortar 1:4 (1 cement : 4 coarse sand sand) for grouting in brick bats as per the direction of Engineer-In-charge. |
| 3 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc., up to floor five level, excluding the cost of centering, shuttering and finishing : |
| 4 | 1:3:6 (1 cement : 3 coarse sand derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 5 | Centering and shuttering including strutting, propping etc. and removal of form work for : |
| 6 | Columns, piers, abutments, pillars, posts and struts. |
| 7 | Brick work with available dismantled old bricks in foundation and plinth in: |
| 8 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 9 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. |
| 10 | Using M.S. angels 40x40x6 mm for diagonal braces |
| 11 | Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. |
| 12 | Brick on edge flooring in required pattern with available dismantled old bricks on a bed of 12 mm cement mortar including filling the joints with same mortar, all complete as per the direction of Engineer-In-charge. |
| 13 | Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/rubbish to the nearest municipal dumping ground, all complete as per directions of Engineer-In-Charge. |
| 14 | For door/ window/ clerestory window. |
| 15 | Providing & fixing White vitreous china water closet squatting pan (Indian type) along with \\"S\\" or \\"P\\" trap including dismantling of old WC seat and \\"S\\" or \\"P\\" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. |
| 16 | Orissa pattern W.C Pan of size 580x440 mm |
| 17 | Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes within 50 metres lead as per direction of Engineer- in-Charge. |
| 18 | Internal Work - Exposed on wall |
| 19 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 20 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.. |
| 21 | In cement mortar |
| 22 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling and glass wood including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. |
| 23 | Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock. |
| 24 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 25 | 10 litre capacity - White |
| 26 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. |
| 27 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 28 | Semi rigid pipe |
| 29 | 32 mm dia |
| 30 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 31 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall |
| 32 | 20 mm nominal outer dia. Pipes. |
| 33 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 34 | 45 cm length |
| 35 | 15 mm nominal bore |
| 36 | Providing and fixing PTMT bib cock of approved quality and colour. |
| 37 | 15mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 38 | Providing and fixing PTMT stop cock of approved quality and colour. |
| 39 | 15 mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 40 | Providing and fixing PTMT pillar cock of approved quality and colour . |
| 41 | 15mm nominal bore, 125 mm long foam flow. Weighing not less than 120 gms. |
| 42 | Providing and fixing PTMT grating of approved quality and colour. |
| 43 | Circular type. |
| 44 | 125 mm nominal dia with 25 mm waste hole. |
| 45 | Providing and fixing PTMT angle stop cock 15 mm nominal bore. Weighing not less than 85 gms. |
| 46 | Removing antistatic flooring from floor and stacking of material with in 50 meters lead including cleaning the surface as per direction of E-I-C. |
| 47 | Bring down all dismantled material i.e. bricks & its bats, aluminium sections, glass panes, paticle boards, glass woods etc. from 1st floor to ground floor and stacking serviceable & unserviceable material separately at a designated location including disposal of rubbish as per direction of E-I-C. |
| 48 | Rubbing and cleaning to wall and floor tiles, wash basin, WC pan, Urinals etc. by hand brush, rubbed by providing magic acid (Floor Tiles cleaner ) and by harpic, acid etc. wiped with a moist rag and dried with a soft cloth and finished clean at ground and first floor toilets as per direction of E-I-C |
| 49 | Laying available dismantled brick bats by well rammed and consolidated upto 150 mm thick and grouted with cement mortar 1:6 (1 cement : 6 fine sand) including necessary excavation leveling & dressing & finishing the top (Note ;- cement mortar 1:6 to be paid in basic item) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysSep 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender