Tender For Replacement Of Doors/Windows Of Kharga Offrs Mess Hq Corps Under Age B/R-Ii Of Ge (North) Ambala Cantt.
Tender Value
13.10 Lakhs
Estimated cost
Bid Submission
01 Oct 2026
20 days left
EMD
26200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ambala → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Replacement Of Doors/Windows Of Kharga Offrs Mess Hq Corps Under Age B/R-Ii Of Ge (North) Ambala Cantt.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frames with shutter area exceeding 1.50 Square meter and not exceeding 4.00 Square meter (without taking off shutters from the frames) and removing from site, including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish complete all as specified and as directed . |
| 2 | Taking down chowkats or frames with shutter area not exceeding 1.50 Square meter (without taking off shutters from the frames) and removing from site, including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish complete all as specified and as directed . |
| 3 | Supply and fixing of Factory made single extruded WPC (Wood Polymer Composite) solid door Frames/ Chowkhat of size 50x75 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant complete all as specified and as directed by the Engr-in-ChargeNote: For WPC solid door frames, minus 5mm tolerance in Dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 4 | Supply and fixing of Factory made single extruded WPC (Wood Polymer Composite) solid door Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant complete all as specified and as directed by the Engr-in-ChargeNote: For WPC solid door frames, minus 5mm tolerance in Dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 5 | Supply and fixing of Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant complete all as specified and as directed by the Engr-in-Charge |
| 6 | Supply and fixing of Factory made single extruded WPC (Wood Polymer Composite) glazed and skeleton shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant complete all as specified and as directed by the Engr-in-Charge. Note wiremesh and building hardware shall be paid seperately. |
| 7 | Supply and fixing Three- TRACK UPVC SLIDING WINDOW are made of UPVC extruded profiles with wall thickness of 2.3 mm ( + 0.2 mm ), Window profile with hollow section with multi chamber, Frame ( 122mm x 54 mm ), Sliding Glazed sash ( 80 mm x 47 mm ), Mesh sash ( 64 x 47mm ) Sliding interlock ( One vertical length in each shutters ) ( 43 mm x 50.5 mm ), Glazing bead ( 29.5 mm x 21.8 mm ) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware, EPDM gasket,1.5 mm(+ 0.2 mm) thick, galvanized steel in Frame 2nos.,Sliding sash and Sliding mesh sash to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100 mm long fasteners, hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.). complete as per manufacture's specification and direction of Engineer-incharge. |
| 8 | Material and labour for PCC (1:3:6), type B-I, using 20mm graded stone agg as in hold fast etc., .complete all as specified and as directed . |
| 9 | Supply and fixing 150mm aluminium handles, cast type, anodised ,complete all as specified and as directed . |
| 10 | Supply and fixing 200mm long aluminium, anodised, barrel tower bolts of extruded section and fixed ,complete all as specified and as directed. |
| 11 | Supply and fixing for 250mm long aluminum alloy, anodized sliding bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloys to door shutter complete all as specified and as directed . |
| 12 | Supply and fixing for mild steel 300 mm ordinary rat tail rod pattern springs including rollers and roller plate etc ,complete all as specified and as directed. |
| 13 | Supply and fixing stainless steel hinges of size 100mm ,complete all as specified and as directed. |
| 14 | Material and labour for galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staple ,complete all as specified and as directed. |
| 15 | Material and labour for taking down cement of cement lime plaster of any description on brick or stone concrete or walls etc including ranking out joints hacking for key scrubbing down with water etc complete all as specified and as directed . |
| 16 | Material and labour brick work with sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 m mean radius, built in cement mortar (1:6 ) including dismentling of existing brick work built in cement mortar or cement lime mortar including all quoins, arches, pillar etc but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified and as directed. |
| 17 | Material and labour for rendering 10 mm thick on any faces of brick work or concrete wall surfaces in cement mortar 1:6 and finishing the surface even and smooth without using extra cement complete all as specified and as directed . |
| 18 | Material and labour for preparation of newly plastered/ unplastered surfaces of walls and applying two coats of oil bound distemper with painting roller over and including 1 to 2 mm thick wall care putty white cement based in one or two coats to achieve smooth surfaces, complete all as specified and as directed . |
| 19 | Material and labour complete removal of existing treatment from wall by scrappers or any other means and washing , rubbing down and stopping and applying two coats of acrylic distemper with painting roller over and including 1 to 2 mm thick wall care putty white cement based in one or two coats to achieve smooth surfaces, complete all as specified and as directed . |
| 20 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed . |
| 21 | Material and labour for Non Skid coloured ceramic tiles 7 to 8 mm thick, (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match inculding 15mm thick screed bed in cement mortar (1:6), Complete all as specified and as directed . |
| 22 | Material and labour for glazed ceramic coloured tiles in vertical surfaces, using tile of size 600 x 300 x 7 to 8 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 10mm thick cement plaster in cement mortar (1:4), complete all as specified and as directed . |
| 23 | Note:- Amount of credit of Rs.19,250.00 for retrieved materials is mentioned in Schedule of Credit Page No……………... of tender documents in pdf form which will be deducted offline while acceptance of tender. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysOct 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender