Tender For Deposit-Laying Of New Water Supply Pipeline And Dismantling Of Existing Pipeline -For The Construction Of Approach Road And Drain Of Mudavanmugal South Road As Part Of New Bridge Construction-Pipeline Work
Tender Value
2.79 Lakhs
Estimated cost
Bid Submission
18 Sep 2026
3 days left
EMD
6977
Bank guarantee accepted
Document Fee
615
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thiruvananthapuram → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Deposit-Laying Of New Water Supply Pipeline And Dismantling Of Existing Pipeline -For The Construction Of Approach Road And Drain Of Mudavanmugal South Road As Part Of New Bridge Construction-Pipeline Work
BOQ
| Sl. No. | Item Description |
| 1 | Appendix A - Labour charges |
| 2 | 15.43.2:Dismantling manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer -in-Charge:Bituminous road |
| 3 | 15.2.2:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:4:8 or leaner mix ( including equivalent design mix) |
| 4 | 100.1.1:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50m, in all kinds of soil. |
| 5 | 100.8.1:Fencing one side of trenches, 1.50m height with two rows of 10cm plastic caution tape in vertical casuarina pole (girth 15cm to 24cm) fixed at 2m intervals. |
| 6 | 100.98.1008:Engaging Coolie. |
| 7 | 100.9.9:Laying uPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipeline to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipeline with water to the required test pressure (excluding cost of pipes and specials): 110 mm nominal outside diameter pipes. |
| 8 | 100.98.458:Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Cap PN 1.6, Size 100mm. |
| 9 | 100.98.460:Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Cap PN 1.6, Size 150mm. |
| 10 | 100.31.1.2:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 100mm diameter, Class I. |
| 11 | 100.31.1.4:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 150mm diameter, Class I. |
| 12 | OD84183/2026-2027:Taking connection from the existing main (single boring), including earthwork excavation supplying and fitting 25mm saddle piece 1 nos,25mm brass ferrule 1 nos, 25mm GM full way valve wheel valve 1 nos, bend 1nos, union 1nos, 32mm pvc adapter 1 nos,110x32 pvc reducer 1nos etc. and connecting the newly laid main,testing the joints etc. complete |
| 13 | OD84182/2026-2027:Taking connection from the existing main (double boring), including earth work excavation ,boring the main, supplying and fitting saddle piece 2 nos,25mm brass ferrule 2 nos, 25mm GM full way valve wheel valve 2 nos, bend 2nos, union 2nos, 32mm pvc adapter 2 nos,110x32 pvc reducer 2nos and connecting the newly laid main testing the joint etc. complete. Rate as per item No 100.1.1 of SH KWA approved data |
| 14 | Appendix B - Construction of Valve Chamber |
| 15 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil |
| 16 | 4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 17 | 5.1.3:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 18 | 5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more |
| 19 | Appendix C Supply of Pipe and Specials |
| 20 | 100.98.237:Supply of PVC Pipe, 10kg/cm2, 110mm Dia. |
| 21 | OD84186/2026-2027:Supplying 20mm ASTM Pipe |
| 22 | OD84184/2026-2027: Supplying and conveying of heavy duty CI MH cover with frame |
| 23 | OD84185/2026-2027:Supplying and Fixing PVC Reducer 160x110/110x75/110x63 mm as per site condition |
| 24 | OD84214/2026-2027:Supply of 100mm CID Joint CL 10 with accesories |
| 25 | OD84215/2026-2027:Supply of 160mm CIR Joint with accesories |
| 26 | OD84216/2026-2027: Supply of 110 mm PVC 90 degree Bend |
| 27 | OD84217/2026-2027:Supply of 110 mm 22.5 degree bend |
| 28 | OD84218/2026-2027:Supply of 110mm PVC TEE 10Kg/cm2 |
| 29 | OD84219/2026-2027:110 mm End cap |
| 30 | Appendix D Alteration of House Connections |
| 31 | OD84174/2026-2027:Alteration of house connection/street tap connection including earthwork excavation, supplyingand fitting suitable saddle piece, supplying and fitting 20 mm brass ferrule 1no,20 mm GM full way wheel valve 1no,Tap ,20mm ASTM Sch-40 pipe and other specials,etc. , connecting the newly laid line, testing the joints etc. as per the direction of departmental officials. |
| 32 | OD84180/2026-2027:Supply and fixing of 150MM dia MS Tail piece |
| 33 | OD84178/2026-2027:Supply and fixing 150mm CID |
| 34 | OD84179/2026-2027:Supply of CIR SET-110mm Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysSep 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender