Tender For Upgradation Of Pump Set No. 1 & 2 At Vasant Kunj C-1 Bps Under Mehrauli Constituency Ac-45
Tender Value
Ref. Documents
Estimated cost
Bid Submission
16 Sep 2026
0 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Upgradation Of Pump Set No. 1 & 2 At Vasant Kunj C-1 Bps Under Mehrauli Constituency Ac-45
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of existing 200 mm dia CIDF Non-Return Valves complete. |
| 2 | Dismantling of existing 200 mm dia CIDF Sluice Valves complete. |
| 3 | Dewatering by submersible pump set of suitable capacity at site of work (14.23 DSR-23) |
| 4 | Supply of CIDF swing type Non Return Valve. The NRV generally confirm to IS 5312, part 1 & part 2. Valve shall be in graded Cl with metal to metal (IS:318 Gr. LTB2) having body, door in CI to IS, 210 Gr. FG. 260, Body ring and door ring of Gun metal IS:318 Gr. LTB2. Hinge pin of SS 410, Rivets of Carbon Steel, Flange are drilled as per IS 1538 Table 4, PN 1.0. Size – 200 mm. Make: Kirloskar/IVC Nasik/Jupiter/DJB approved. SOR 2025 4.14.7 |
| 5 | Supply of SLUICE VALVE-CIDF WATER. The Sluice valve generally confirm to IS:14846 with length over flanges as per PD of IS:14846 corresponding to BS EN-558/ISO5752 Basic Series 3 in CI construction having metal seating (IS:318 Gr. LTB2). Body Door Dome CI to IS:210 Gr. Fg.260, body seat/door face are made of gun metal IS:318Gr. LTB2 spindle will be non-rising stainless steel AISI 410, spindle nut gun metal IS:318 Gr. LTB2, fasteners will be made of carbon steel and flanges are drilling as per IS:1538 table $ & 6. Suitable for PN1.0 rating. Size – 200 mm. Make: Kirloskar/IVC Nasik/Jupiter/DJB approved. SOR 2025 4.22.5 |
| 6 | Supply of Kinetic Air Valve with isolating sluice Valve. The valve generally confirms to IS: 14845: 2000, Body Cover, Cowl Grey Cast Iron IS: 210 Gr. 200, Stem SS IS: 16603, Body Seal Ring EPDM Float timber ball over with soft vulcanite. PN 1.0 rating. Size – 200 mm. Make: Kirloskar/IVC Nasik/Jupiter/DJB approved. SOR 2025 4.24.4 |
| 7 | Installing, aligning, testing & commissioning of supplied 200 mm dia PN 1.0 CIDF NRV including flange jointing, gaskets, nuts, bolts, labour, T&P etc. |
| 8 | Installing, aligning, testing & commissioning of supplied 200 mm dia PN 1.0 CIDF Sluice Valve including flange jointing, labour & T&P complete. |
| 9 | Installing, aligning, testing & commissioning of supplied 200 mm dia PN 1.0 Air Valve including flange jointing, labour & T&P complete. |
| 10 | Repairing, servicing and overhauling of electric actuators including replacement of bearings, bushes, oil seals, gland packing, gears, limit switches, torque switches, lubrication, calibration, testing & commissioning etc. |
| 11 | Providing & fixing 3 mm thick insertion rubber gaskets for 200 mm dia flange joints. |
| 12 | Providing & fixing HT galvanized nuts, bolts, washers etc. for 200 mm dia flange joints. |
| 13 | Fabrication and fixing of MS spacer pieces/flange adaptors including cutting, drilling, welding, machining and painting complete. |
| 14 | Cutting, welding and modification of existing 200 mm dia MS pipeline including gas cutting, welding electrodes, grinding, alignment and finishing. |
| 15 | Providing and fixing MS supports, clamps, anchor plates and strengthening members including welding and painting. |
| 16 | Repair of damaged concrete around valve pedestals with M-25 concrete including shuttering and curing. |
| 17 | Providing non-shrink cementitious grout below valve supports/base plates. |
| 18 | Cleaning of exposed MS pipeline and fabricated members and applying one coat primer with two coats synthetic enamel paint. |
| 19 | Hydrostatic testing of replaced valves and pipeline including leakage rectification. |
| 20 | Testing, trial run and commissioning of complete flow control system including six pump delivery lines and common header. |
| 21 | Deployment of chain pulley blocks, hydraulic jacks, welding machine, gas cutting set, grinders, lifting equipment, tools & tackles, loading, unloading and carriage complete. |
| 22 | Providing consumables such as PTFE tape, anti-seize compound, electrodes, cutting discs, lubricants, cleaning chemicals etc. |
| 23 | Site cleaning, safety arrangements as per guidelines, barricading, PPE, disposal of debris etc. as per directions of engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodaySep 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender