Tender For Upgradation Of Pump Set No. 1 & 2 At Vasant Kunj C-1 Bps Under Mehrauli Constituency Ac-45
Tender Value
Ref. Documents
Estimated cost
Bid Submission
16 Sep 2026
1 days left
EMD
49000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Upgradation Of Pump Set No. 1 & 2 At Vasant Kunj C-1 Bps Under Mehrauli Constituency Ac-45
BOQ
| Sl. No. | Item Description |
| 1 | PUMPSET DISMANTLING & FOUNDATION :- Dismantling of existing motor pumpsets including electrical disconnection, coupling, valves, NRV, taper pieces etc. |
| 2 | Closing of suction/delivery lines with MS blank flanges |
| 3 | Dismantling damaged MS base frame and RCC foundation including pneumatic breaker |
| 4 | Construction of new RCC foundations including reinforcement, shuttering, welding and grouting |
| 5 | Foundation bolts 16 mm dia × 450 mm with nuts & washers |
| 6 | MS taper 200 × 150 mm, 8 mm thick with flanges |
| 7 | Rubber insulation sheet |
| 8 | Anti-vibration pads, Everest/Dunlop or approved equivalent |
| 9 | MS nuts, bolts and washers |
| 10 | PUMPSET & INSTALLATION :- Procurement of Single-stage, horizontal, with axially spilt volute casing pump comprising of impeller, Neck Ring & Casing (Grey Cast Iron), mechanical seal, Shaft & Sleeve (SS-410) with suitable bearing having following parameters: Discharge - 414 m3/hr, Head - 50 m, Size - 200 x 150 mm. Make: M&P/KSB/DJB approved coupled with Squirrel cage Induction Motor (IE2) 120 HP with Enclosure conforming to protection IP 55 Horizontal Foot Mounted (B3),continuously rated (S1) suitable for operation on 415+/- 10% V,3 Phase 50Hz+/- 5% AC supply with ambient 50ºC,Class \\"F\\" insulation with temperature rise limited to Class \\"B\\" altitude less than 1000 m above m.s.l. Performance Efficiency values are conforming to IS12615 / IS/IEC 60034. Make: Crompton/KEC/KSB/DJB approved. The complete pumpset shall be provided with baseframe, coupling & coupling guard. One pumpset will be provided by the Department. |
| 11 | Installation, alignment, levelling, coupling, grouting of pumpsets (along with base frame) on the foundation. |
| 12 | 120 sq.mm 3.5 core Aluminium armoured cable. Make -DJB approved |
| 13 | Pressure gauge with isolation valve, siphon tube and fittings |
| 14 | Laying, dressing, glanding and termination of 120 sq.mm cable including glands, lugs, ferrules etc. |
| 15 | Perforated MS cable tray with bends, tees, supports, clamps etc. |
| 16 | Electrical connections with glands, lugs, thimbles, ferrules etc. |
| 17 | Suction connection with 200 mm sluice valve, gap piece and flange |
| 18 | Delivery connection with 150 mm sluice valve, NRV, taper piece and flange |
| 19 | Safety equipment for site manpower |
| 20 | Painting of complete structures with primer and two coats enamel |
| 21 | COMMON DELIVERY HEADER & DIRECT INTERCONNECTION :- Dismantling of existing elevated common delivery header including bends, flanges, supports and fittings |
| 22 | Providing/fixing MS common delivery header at ground level including fabrication, welding, flanges and bends |
| 23 | MS supports for common delivery header including channels, angles, clamps, base plates and anchoring |
| 24 | Excavation for new delivery pipeline from pumphouse to existing interconnection valve |
| 25 | Providing and laying MS delivery pipe including welding, flanges, bends and fittings. Dismantled pipelines shall be used and payment will be made for extra pipeline if required. |
| 26 | Breaking of pumphouse wall for taking out delivery pipeline |
| 27 | MS sleeve through pumphouse wall including sealing |
| 28 | Direct connection with existing interconnection valve including dismantling piece, gasket, nuts/bolts and welding |
| 29 | MS dismantling/flanged joint for future maintenance |
| 30 | Pipe supports/anchor arrangements including clamps and civil anchoring |
| 31 | Refilling and compaction of excavated trench |
| 32 | Making good broken pumphouse wall including masonry, plastering and finishing |
| 33 | PCC/RCC protection to delivery pipeline at wall crossing/vulnerable portions |
| 34 | Hydrostatic/leakage testing of new delivery pipeline and joints |
| 35 | Painting of new MS delivery pipeline, header, bends, flanges and supports |
| 36 | Transportation, loading/unloading and shifting of pumpset, MS pipes, fittings and other materials |
| 37 | Final testing and commissioning of complete pumpset and modified delivery system at no-load/full-load Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 daySep 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender