Tender For Construction Of Road From Mazua Relling Road Via Victoria Chruch To Nevara Chruch (900M)
Tender Value
1.13 Crore
Estimated cost
Bid Submission
25 Sep 2026
11 days left
EMD
2.26 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Darjeeling → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Construction Of Road From Mazua Relling Road Via Victoria Chruch To Nevara Chruch (900M)
BOQ
| Sl. No. | Item Description |
| 1 | ROAD WORKExcavation for roadway in ordinary rock by deploying a dozer, 80 HPincluding cutting and pushing the cutearth to site of embankment up to a distance of 100 metres(average lead 50 metres), trimmingbottom and side slopes in accordancewith the requirements of lines, gradesand cross sections (Reference toMoRT&H's specification clause 301). |
| 2 | Construction of dry rubble flooring (shall be laid closely on the preparedbase in one or more layers with appropriate bond) at cross drainageworks for relatively less important works (Reference to MORT&H's specification2506). |
| 3 | Construction of un-reinforced, doweljointed, plain cement concrete pavement of specified grade withcharacteristic flexural strength ofconcrete not less than 4.5 MPa over aprepared sub base as per clause 602 ofMORT&H's specification 2013 andcement content as per clause 602.3.2 ,coarse and fine aggregate conformingto IS 383, using fine and coarseaggregates of approved varietycombined gradation as per Table 600-3of MORTH specification 2013,maximum size of coarse aggregate notexceeding 31.5 mm, mixed in a batchmix plant with weigh batching facilityas per approved mix design done as perIRC:44, transported to site, laid with aslip form paver with electronic sensor ,spread, compacted and finished in acontinuous operation including provision of contraction,expansion,construction and longitudinaljoints, joint filler, separation membrane, sealant primer, jointsealant as per IRC:57, debonding strip,dowel bar,tie bar, admixtures asapproved, tinning, texturing,curing,finishing to lines and grades as perdrawing (Reference to MORT&H'sspecification 602 along with IRC 15). |
| 4 | PROTECTION WALLEarth work in excavation of foundation of structures as per drawing and technical specification,including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material (Reference to MORT&H's specification 304). |
| 5 | Back filling behind abutment, wing wall and return all complete including spriklring water and throughly compacted with plate compactor/power rammer in layers not exceeding 150mm compacted thickness as per drawing and Technical Specification (710.1.4 of IRC:78 & MoRTH's specification 2200 |
| 6 | Plum concrete (1:3:6) Plain cement concrete of nominal mix (1:3:6 ) with coarse aggregate of which stone boulder of size 225 mm to 150mm of 60% of total dry volume to be placed in position as directed by Eng-in charge ,67% - 40 mm down single &33% - 20 mm down bazri , Coarse Sand ,Cement ( 53 grade ) mechanically mixed in 1:3:6 of rest volume and placed in position and compacted by any means as directed including cost of shuttering . |
| 7 | Providing weep holes in Brick masonry/Plain/ reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC/PVC/HDPC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical Specifications (Reference to MORT&H's specifications 2706 & 2200). |
| 8 | ROAD FURNITURE AND SAFETYPlain/Reinforced cement concrete in open foundation complete all including vibrating and compacting, finishing, curing, sampling, testing etc. as per drawing and Technical Specifications (Reference to MORT&H's specifications 1500, 1700 & 2200). |
| 9 | Supplying, binding, fixing etc. including initial straightening, cutting to requisite length, hooking and bending to correct shape, placing in proper postion of uncoated HYSD reinforcement bar in super-structure complete as per drawing and technical specifications (Reference to MORT&H's specification 1600) . |
| 10 | Painting Two Coats on New Concrete Surfaces Painting two coats, after filling the surface & applying a sealing primer, with synthetic enamel paint in all shades on new plastered concrete surfaces as per MORT7H's specification 803.6.2.(Reference to MORT&H's specification 803). |
| 11 | SURFACE DRAINAGEEarth work in excavation of foundation of structures as per drawing and technical specification,including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material (Reference to MORT&H's specification 304). |
| 12 | Construction of dry rubble flooring (shall be laid closely on the preparedbase in one or more layers with appropriate bond) at cross drainageworks for relatively less important works (Reference to MORT&H's specification2506). |
| 13 | Plain/Reinforced cement concrete in open foundation complete all including vibrating and compacting, finishing, curing, sampling, testing etc. as per drawing and Technical Specifications (Reference to MORT&H's specifications 1500, 1700 & 2200) |
| 14 | 18%GST Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysSep 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender