Tender For Hiring Of Services For Operation And Maintenance (O&M) Of Cgd Network Of Ga11.03, Assam
Tender Value
Ref. Documents
Estimated cost
Bid Submission
01 Oct 2026
16 days left
EMD
9.66 Lakhs
Bank guarantee accepted
Document Fee
3802
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Guwahati → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Hiring Of Services For Operation And Maintenance (O&M) Of Cgd Network Of Ga11.03, Assam
BOQ
| Sl. No. | Item Description |
| 1 | Total Quoted Amount (Incl.GST) for: |
| 2 | Total Amount (Part-A + Part-B) (Including GST) Please Enable Macros to View BoQ information |
| 3 | PART-A: MANPOWER CHARGES |
| 4 | Description: Providing manpower support services for Operation & Maintenance of PNG network including emergency responce/breakdown of MDPE, LMC & steel network. Locations: Sonitpur, Darrang, Udalguri and Biswanath Chariali |
| 5 | Supervisor (Higly-Skilled) |
| 6 | PE Technician/Fusion Welder (Semi - skilled) |
| 7 | GI Technician/Plumber (Semi - Skilled) |
| 8 | Helper/Labor (Unskilled) Total Value Service Charge for SOR item no. 1.02 to 1.05Note: The bidder shall quote the Service Charge as a positive value only. In case a bidder quotes a negative Service Charge, the same shall be considered as Zero (0) service charge. Total Value (PART-A) (Including Service Charge)Excluding GST PART-B |
| 9 | Control Room/Lodging facilityDecription: Bidder is required to arrange Control room cum Lodging facilities for its manpower with sufficient space to keep their manpower and materials. Office should be finalized to the satisfaction of EIC. Office shall be located at strategic location for round the clock monitoring of O&M activities |
| 10 | Emergency Response Vehicle [ERV]Decription: Deployment of Emergency Vehicle [4 Wheeler - Mahindra Bolero Camper / TATA Xenon Crew Cabin/ TATA Yodha OR Equivalent Model] (4 + 1 Seater) as per Branding & Necessary Modification (Internal & External) to perform O&M activity for round the clock (24 hr) including Fuel, Driver, Consumables, with necessary provision to store tools & tackles etc. Model shall be BS VI, not older tha 2025. (Including 1500 Km per Month) |
| 11 | Running Kms for ERVDecription: Running cost of the ERV per Km for O&M activities beyond 1500 km per month |
| 12 | Meter Reading, Bill Circulation for Domestic, Industrial and Commercial Connections: Charges for meter reading and bill circulation through dedicated personnel. |
| 13 | Removal/DisconnectionsDecription : This SOR is applicable for, Removal of GI, LMC connection. Removal of Threaded 1/2\\" GI Pipe including all fittings, regulators, meters and submitting the recovered materials to NEGDCL. |
| 14 | Removal/DisconnectionsDecription : This SOR is applicable for, Removal of GI, LMC connection. Removal of Threaded 3/4\\" GI Pipe including all fittings, regulators, meters and submitting the recovered materials to NEGDCL. |
| 15 | Removal/DisconnectionsDecription : This SOR is applicable for, Removal of GI, LMC connection. Removal of Threaded 1\\" GI Pipe including all fittings, regulators, meters and submitting the recovered materials to NEGDCL. |
| 16 | Restoration of trenches/PitsRestoration of trenches to original surface as applicable including shifting of surplus excavated earth/debris - Restoration of the roads, pavements, channels, footpaths, tiles, stones etc. to original condition including supply of the approved quality material required, as per local authorities norms, obtaining NOC from concerned local authorities/ land owners/ third party agencies designated by Owners and to the satisfaction of EIC |
| 17 | Pavers- 80 mm thk. Of M35 Grade |
| 18 | Brick Soling / Channels etc. |
| 19 | CC Road |
| 20 | Ashphalt Road |
| 21 | Tiles |
| 22 | Red Sand Stone/Kerb Stone |
| 23 | Hiring of JCB for excavation Hiring rates is inclusive of fuel cost, operators cost, Maintenance cost etc. |
| 24 | Hiring of Hydra/CraneHiring rates is inclusive of fuel cost, operators cost, Maintenance cost etc. |
| 25 | Hiring of Diesel Generator set - 15 KVA ( This requirement is under circumstances besides the Generator available in Emergency van) |
| 26 | Hiring of Dewatering/Mud Pump greater than 5 HP with hose pipe and accessories (This requirement is under circumstances besides the Dewatering pump available in Emergency van) |
| 27 | Supply of GI 1\\" Coupler (ISI marked GI Coupler with NPT thread) |
| 28 | Supply of GI 3/4\\" Coupler (ISI marked GI Coupler with NPT thread) |
| 29 | Supply of GI 1/2\\" Coupler (ISI marked GI Coupler with NPT thread) |
| 30 | Supply of GI 1\\" Union (ISI marked with NPT thread) |
| 31 | Supply of GI 3/4\\" Union (ISI marked with NPT thread) |
| 32 | Supply of GI 1/2\\" Union (ISI marked with NPT thread) |
| 33 | Supply of GI 1\\" Elbow (ISI marked with NPT thread) |
| 34 | Supply of GI 3/4\\" Elbow (ISI marked with NPT thread) |
| 35 | Supply of GI 1/2\\" Elbow (ISI marked with NPT thread) |
| 36 | Supply of GI 1\\" Plug (ISI marked with NPT thread) |
| 37 | Supply of GI 3/4\\" Plug (ISI marked with NPT thread) |
| 38 | Supply of GI 1/2\\" Plug (ISI marked with NPT thread) |
| 39 | Supply of GI 1\\" Tee (ISI marked with NPT thread) |
| 40 | Supply of GI 3/4\\" Tee (ISI marked with NPT thread) |
| 41 | Supply of GI 1/2\\" Tee (ISI marked with NPT thread) |
| 42 | Supply of GI Reducer 1\\" x 3/4\\" (ISI marked with NPT thread) |
| 43 | Supply of GI Reducer 3/4\\"X 1/2\\"\\" (ISI marked with NPT thread) |
| 44 | Supply of GI ELBOW male x Female 3/4\\"\\"(ISI marked with NPT thread) |
| 45 | Supply of GI ELBOW male x Female 1/2\\"(ISI marked with NPT thread) |
| 46 | Supply of Appliance Valve 1/4\\" |
| 47 | Supply of Appliance Valve 1/2\\" |
| 48 | Supply of GI 1\\" Clamp (MS) |
| 49 | Supply of GI 3/4\\" Clamp (MS) |
| 50 | Supply of GI 1/2\\" Clamp (MS) |
| 51 | Supply of GI 1/2\\" Hex Nipple (ISI marked with NPT thread) |
| 52 | Supply of GI 1/2\\" Nipple 1/2\\" x 2\\" (ISI marked with NPT thread) |
| 53 | Supply of Regulator Bush (ISI marked with NPT thread) |
| 54 | Supply of Isolation Valve 1\\" (ISI marked with NPT thread) |
| 55 | Supply of Isolation Valve 3/4\\" (ISI marked with NPT thread) |
| 56 | Supply of Isolation Valve 1/2\\" (ISI marked with NPT thread) |
| 57 | Supply of Meter inlet Adaptor 3/4\\" X 3/4\\"(As per IS 319) |
| 58 | Supply of Meter inlet Adaptor 3/4\\" X 1/2\\"(As per IS 319) |
| 59 | Supply of O Ring (ISI marked) |
| 60 | Supply of PVC Sleeves for 1/2\\" GI pipe |
| 61 | Supply of Meter Warning Plate SS |
| 62 | Supply of Warning Mat |
| 63 | Supply of Suraksha Hose pipe (ISI mark) |
| 64 | Supply of Jet 110 Brass (Brass jet with NPT thread) |
| 65 | Supply of Jet 125/120 Brass (Brass jet with NPT thread) |
| 66 | Supply of MDPE Coupler SDR 11,PE 100 -20mm |
| 67 | Supply of MDPE Coupler SDR 11,PE 100 -32mm |
| 68 | Supply of MDPE Coupler SDR 11,PE 100 -63mm |
| 69 | Supply of MDPE Coupler SDR 11,PE 100 -90mm |
| 70 | Supply of MDPE Coupler SDR 11,PE 100 -125mm |
| 71 | Supply of MDPE Elbow SDR 11,PE 100 -32mm |
| 72 | Supply of MDPE Elbow SDR 11,PE 100 -63mm |
| 73 | Supply of MDPE Elbow SDR 11,PE 100 -90mm |
| 74 | Supply of MDPE Elbow 45 deg SDR 11,PE 100 -63mm |
| 75 | Supply of MDPE Elbow SDR 11,PE 100 -125mm |
| 76 | Supply of MDPE Elbow 45 deg SDR 11,PE 100 -90mm |
| 77 | Supply of MDPE Elbow 45 degSDR 11,PE 100 -125mm |
| 78 | Supply of MDPE Top Tee SDR 11,PE 100 -32 x 20mm |
| 79 | Supply of MDPE Top Tee SDR 11,PE 100 125 x 32mm |
| 80 | Supply of MDPE Top Tee SDR 11,PE 100 125 x 63mm |
| 81 | Supply of MDPE Top Tee SDR 11,PE 100 -63 x 32mm |
| 82 | Supply of MDPE Top Tee SDR 11,PE 100 -63 x 20mm |
| 83 | Supply of MDPE Top Tee SDR 11,PE 100 -125 x 90mm |
| 84 | Supply of MDPE Top Tee SDR 11,PE 100 -90 x 63mm |
| 85 | Supply of MDPE Top Tee SDR 11,PE 100 -90 x 32mm |
| 86 | Supply of MDPE Top Tee SDR 11,PE 100 -90 x 20mm |
| 87 | Supply of Equal Tee SDR 11 ,PE 100 -20mm |
| 88 | Supply of Equal Tee SDR 11 ,PE 100 -32mm |
| 89 | Supply of Equal Tee SDR 11 ,PE 100 -63mm |
| 90 | Supply of Equal Tee SDR 11 ,PE 100 -90mm |
| 91 | Supply of Equal Tee SDR 11 ,PE 100 -125mm |
| 92 | Supply of End Cap SDR 11,PE 100 -20 mm |
| 93 | Supply of End Cap SDR 11,PE 100 -32 mm |
| 94 | Supply of End Cap SDR 11,PE 100 -63 mm |
| 95 | Supply of End Cap SDR 11,PE 100 -90 mm |
| 96 | Supply of End Cap SDR 11,PE 100 -125 mm |
| 97 | Supply of Reducer SDR 11,PE 100 -32x20mm |
| 98 | Supply of Reducer SDR 11,PE 100 -63x32mm |
| 99 | Supply of Reducer SDR 11,PE 100 -125x90mm |
| 100 | Supply of Reducer SDR 11,PE 100 -90x63mm |
| 101 | Supply of Reducer SDR 11,PE 100 -90x32mm |
| 102 | Supply of Reducer SDR 11,PE 100 -125x63mm |
| 103 | Supply of TF Fittings 20 x 1\\" |
| 104 | Supply of TF Fittings 32 x 1\\" |
| 105 | Supply of TF Fittings 63 x 1\\" |
| 106 | Supply of TF Fittings 90 x 1/2\\"/3/4\\" |
| 107 | Supply of TF Fittings 63 x 1/2\\"/3/4\\" |
| 108 | Supply of TF Fittings 20/32 x 1/2\\"/3/4\\" |
| 109 | Supply of 125 mm Ball valve |
| 110 | Supply of 90 mm Ball valve |
| 111 | Supply of 63 mm Ball valve |
| 112 | Supply of 32 mm Ball valve |
| 113 | Total Value for PART-B (Excl GST) |
| 114 | Total Value Excluding GST (PART-A + PART-B) |
| 115 | GST on Sl no. 100(Bidder must enter GST value without suffixing % symbol). Total Value Including GST (PART-A + PART-B) |
AI Tender Summary
Tender Timeline
Sep 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysOct 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender