Tender For Estimate For Solid Waste Management At Karde, Dapoli
Tender Value
Ref. Documents
Estimated cost
Bid Submission
23 Sep 2026
12 days left
EMD
39600
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ratnagiri → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Estimate For Solid Waste Management At Karde, Dapoli
BOQ
| Sl. No. | Item Description |
| 1 | FOOD COMPOSTER MACHINE |
| 2 | SIMPLE PROCESSING MACHINE |
| 3 | Providing, erecting & giving test trial of components of simple processing machine of capacity 9 M.T. per 12 hours working. Machine having following specifications including transportation, loading, unloading, one year guarantee with third party coverage etc., complete as directed by Engineer-in-Charge.Technical SpecificationCapacity: 9 M.T. per 12 hours workingOverall Dimensions (mm): (W) 1170 × 1800 (with hopper) × (H) 1900Motor: 4-way “V” belt pulleySecondary Drive: 20 HP, foot mounted, 1440 RPMMaterial of Construction: MS sheet of suitable size along with base frame of ISMC 150 × 75 channelElectrical Control: Consists of fuseless protection with emergency switchFinishing and Painting: Entire machine exposed surface is ground and to be painted with enamel paint of customer desired shade. |
| 4 | Estimate for Composter Machine Shed |
| 5 | Excavation in laterite rock masses mechanically, including lift upto 1.5M including trimming and levelling the bed removing the excavated material upto a distance of 50M beyond the area and lift as below stacking by as directed by Engineer in charge, normal dewatering excluding backfilling etc complete. |
| 6 | Providing dry/trap/granite/quartzite/gneiss rubble stone soling 15mm to 20mm thick including hand packing & compacting |
| 7 | Providing and laying in situ plain cement concrete of trap/granite/quartzite gneiss metal for P.C.C or bedding for foundation work etc and steel including normal dewatering , formwork and compaction etc complete (PCC M-150) |
| 8 | Providing laterite stone masonry in cement mortar 1:6 in superstructure including racking out joints where plastering is to be done watering and scaffolding complete. (laterite stone six sides cut and thickness of mortar joints shall be 12 mm max.) |
| 9 | Provinding internal cement plaster 12 mm thick in a singal coat in c:m 1:3 without `neeru finish to concerating or Brick work surface in all position including curing etc complete. |
| 10 | Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15mm thick in cement mortar 1:4 using water proofing compound at 1Kilogram per cement bag curing the same for not less than 2days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. |
| 11 | Providing stuctural steel work in single stanchions composed of RSJ,channel,etc, with caps,bases,mild steel plates, angles,brackets, cleats,gusset plates, anchor bolts, etc.as per detailed desing and drawing or as directed by Enginner-in-charge including cutting, fabrication, hoisting, erecting, fixing in position, making riveted/bolted/welded connections and one coats of anticorrosive paint and over it two coats of oil painting, etc. complete. |
| 12 | Providing structural steel work in single stanchions composed of R.S.J. Channel etc. with caps, bases, mild steel plated, angle brackets, cleats, gusset plates, anchor bolts etc. as per detailed designs and drawings or as directed including cutting, fabrication, hoisting, erecting fixing in position, making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it two. coats of oil painting approved quality and shade etc. complete |
| 13 | Providing and fixing colour coated Zincalume ( R ) AZ150 ( min 150 gms/sq.mt.total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950- 1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center- to-center. The end rib shall be designed for anti-capillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/ One Square Metre) |
| 14 | Providing and fixing mild steel grill gate with angle iron frame 65x65x10 mm with iron bars at 150 mm etc centre to centre and diagonal flatsas per the detailed drawing, including hinges, pivot blocks, locking arrangement, welding, reveting with oil painting in three coats of approved colour shade.(Weight of gate 35 kg/sq.m) |
| 15 | Electrification charges |
| 16 | Estimate for Plastic Processing Unit At Karde, Dapoli |
| 17 | Excavation in laterite rock masses mechanically, including lift upto 1.5M including trimming and levelling the bed removing the excavated material upto a distance of 50M beyond the area and lift as below stacking by as directed by Engineer in charge, normal dewatering excluding backfilling etc complete. |
| 18 | Providing dry/trap/granite/quartzite/gneiss rubble stone soling 15mm to 20mm thick including hand packing & compacting |
| 19 | Providing and laying in situ plain cement concrete of trap/granite/quartzite gneiss metal for P.C.C or bedding for foundation work etc and steel including normal dewatering , formwork and compaction etc complete (PCC M-150) |
| 20 | Providing and laying in situ cement concrete of trap/granite/quartzite gneiss metal for RCC work in foundation like raft, grillage , strip foundation and footing of RCC columns and steel stanchions including normal dewatering , form work and compaction etc complete. (RCC M-150) |
| 21 | Providing laterite stone masonry in cement mortar 1:6 in superstructure including racking out joints where plastering is to be done watering and scaffolding complete. (laterite stone six sides cut and thickness of mortar joints shall be 12 mm max.) |
| 22 | Provinding internal cement plaster 12 mm thick in a singal coat in c:m 1:3 without `neeru finish to concerating or Brick work surface in all position including curing etc complete. |
| 23 | Providing External cement plaster 20mm thick in a single coat in cement mortar 1:3 without neeru finish to concrete, brick surfaces in all positions including scaffolding and curing. Providing groove at joint of B.B. Masonry and concrete members complete |
| 24 | Providing stuctural steel work in single stanchions composed of RSJ,channel,etc, with caps,bases,mild steel plates, angles,brackets, cleats,gusset plates, anchor bolts, etc.as per detailed desing and drawing or as directed by Enginner-in-charge including cutting, fabrication, hoisting, erecting, fixing in position, making riveted/bolted/welded connections and one coats of anticorrosive paint and over it two coats of oil painting, etc. complete. |
| 25 | Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, making riveted /bolted/welded connection and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade complete. |
| 26 | Providing and fixing colour coated Zincalume ( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center- to-center. The end rib shall be designed for anti-capillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/ One Square Metre) |
| 27 | Providing and fixing Vally gutter of 22 B.W.G. galvanised iron sheet 90 cm including fastening with galvanised iron screws and bolts and lead and bitumen washers, including filling gaps by C.M.1:3 etc.complete. |
| 28 | Providing and fixing mild steel grill gate with angle iron frame 65x65x10 mm with iron bars at 150 mm etc centre to centre and diagonal flatsas per the detailed drawing, including hinges, pivot blocks, locking arrangement, welding, reveting with oil painting in three coats of approved colour shade.(Weight of gate 35 kg/sq.m) |
| 29 | Providing And Fixing Ready Made Bathroom |
| 30 | Segregation Compartments |
| 31 | Electrification charges |
| 32 | MSEB 3 phase connection |
| 33 | Control Pannel |
| 34 | Dust Removal Machine Technology - Plastic Bags Cleaning MachineCapacity Output - 100-200 Kgs / HourAutomation - Semi-AutomaticMachine Weight - 400Feeding Mouth - 15” x 19” with Hopper to insert wasteMotor Capacity in HP - 3 HPDrum Length & Diameter - 55” x 40”Other Features/Requirement - All types of Soft Plastic Materials can be processed Duct is Provided to control the ejection of cleaned sheet Bearings are made of High Grade Metal Alloy Dynamic Balanced Rotor Dedicated Control Panels for Push Buttons operationRequired area for Machine - Length – 6 FT Width – 3.56 FT Height – 4.5 FT |
| 35 | Shredder Machine (Plastic Scrap Griender Machine)Motor Power - 15 HPGrinding Capacity (Kgs/Hour) - 200 kgNo. of blades- 5Throat Size (inch) - 20 X 20Length of blade (inch) - 20Required area for Machine - Length – 1600 mm Width – 1250 mmWeight (Kgs) - 1200 kg |
| 36 | Plastic Bailing MachineHydraulic Bailing Machine (with oil)Hydraulic pressing Capacity - 40 TonsBale Size (mm) - 900 X 700Height as per weight of bale |
| 37 | Estimate For Garbage Vehicle |
| 38 | GARBAGE TIPPER MOUNTED ON FOUR WHEELER: |
| 39 | Revised Specification as per Gem PortalProviding & supplying at site Hopper Tipper Dumper used for garbageUsage/Application: GarbageType of Fuel: DieselVehicle Emission Compliance: BS VI (OBD2)Maximum Engine Power Range (in KW): ≤100Category of Vehicle: Light Commercial VehicleFront Vehicle Brake: Disc BrakeRear Vehicle Brake: Drum BrakeVehicle Transmission System: ManualType of Steering: ManualVehicle Air Intake System: TurbochargedAxle Configuration: 4 × 2Air Conditioning: NoWarranty Period: 1 Year or 1 lakh kms, whichever is earlierBattery Warranty: 12 monthsGross Vehicle Weight (Kerb + Payload): 2590 kgPayload Capacity: 1567 kgType of Tipper: Garbage TipperHopper Tipper Dumper Capacity: 2.5 cubic meterTipper Container Material: Mild Steel |
| 40 | Estimate for Segregation Shed At Karde, Dapoli |
| 41 | Excavation in laterite rock masses mechanically, including lift upto 1.5M including trimming and levelling the bed removing the excavated material upto a distance of 50M beyond the area and lift as below stacking by as directed by Engineer in charge, normal dewatering excluding backfilling etc complete. |
| 42 | Providing dry/trap/granite/quartzite/gneiss rubble stone soling 15mm to 20mm thick including hand packing & compacting |
| 43 | Providing and laying in situ plain cement concrete of trap/granite/quartzite gneiss metal for P.C.C or bedding for foundation work etc and steel including normal dewatering , formwork and compaction etc complete (PCC M-150) |
| 44 | Providing and laying in situ cement concrete of trap/granite/quartzite gneiss metal for RCC work in foundation like raft, grillage , strip foundation and footing of RCC columns and steel stanchions including normal dewatering , form work and compaction etc complete. (RCC M-150) |
| 45 | Providing laterite stone masonry in cement mortar 1:6 in superstructure including racking out joints where plastering is to be done watering and scaffolding complete. (laterite stone six sides cut and thickness of mortar joints shall be 12 mm max.) |
| 46 | Provinding internal cement plaster 12 mm thick in a singal coat in c:m 1:3 without `neeru finish to concerating or Brick work surface in all position including curing etc complete. |
| 47 | Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15mm thick in cement mortar 1:4 using water proofing compound at 1Kilogram per cement bag curing the same for not less than 2days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. |
| 48 | Providing stuctural steel work in single stanchions composed of RSJ,channel,etc, with caps,bases,mild steel plates, angles,brackets, cleats,gusset plates, anchor bolts, etc.as per detailed desing and drawing or as directed by Enginner-in-charge including cutting, fabrication, hoisting, erecting, fixing in position, making riveted/bolted/welded connections and one coats of anticorrosive paint and over it two coats of oil painting, etc. complete. |
| 49 | Providing structural steel work in single stanchions composed of R.S.J. Channel etc. with caps, bases, mild steel plated, angle brackets, cleats, gusset plates, anchor bolts etc. as per detailed designs and drawings or as directed including cutting, fabrication, hoisting, erecting fixing in position, making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it two. coats of oil painting approved quality and shade etc. complete ISA 50x50x5 mm Dia. For Main Strut |
| 50 | Providing and fixing 6mm thick ISI mark Asbestos Cement ridge capping forroo fing including galvanise diron hooks, bolts, galvanised iron and bituminous washers, galvanised iron clamps, bolts, nuts including scaffolding etc. complete. |
| 51 | Providing and fixing mild steel grill gate with angle iron frame 65x65x10 mm with iron bars at 150 mm etc centre to centre and diagonal flatsas per the detailed drawing, including hinges, pivot blocks, locking arrangement, welding, reveting with oil painting in three coats of approved colour shade.(Weight of gate 35 kg/sq.m) |
| 52 | Electrification charges Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysSep 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender