Tender For Construction Of Two New Rooms (Ground Floor And First Floor) In annual maintenance contract Office Building In Ward No. 23 Under annual maintenance contract
Tender Value
18.12 Lakhs
Estimated cost
Bid Submission
21 Sep 2026
8 days left
EMD
36500
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Saraikela Kharsawan → Jharkhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Two New Rooms (Ground Floor And First Floor) In annual maintenance contract Office Building In Ward No. 23 Under annual maintenance contract
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling pucca brick or lime work including stacking serviceable materials in countable stacks within 15m lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. [ 5.10.1] |
| 2 | Dismantling plain cement or lime concrete including stacking serviceable materials in countable stacks within 15m lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. [ 5.10.2] |
| 3 | Earthwork excavation in foundation trenches in ordinary soil (vide classification of soil item A) ….do…...do... specification and direction of E/I.[5.1.1+5.1.2] |
| 4 | Disposal of excavated earth in borrow area of lead 1km(k) + 2km(p) |
| 5 | Providing coarse clean sand filling in foundation trenches or in plinth including ramming and watering in layer not exceeding 150 mm thick with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per building a specification and direction of E/I.[15.1.10] |
| 6 | Providing designation 75B one brick on flat soling joints filled with local sand including cost of watering taxes royality all complete as per specification and direction of E/1.[5.6.3] |
| 7 | Providing and laying PCC M-20 with nominal mix (1:1.5.3)in position cement concrete of specified grade excluding the cost of centering and shuttering-All work up to plinth level:[5.3.1.1] |
| 8 | Providing designation 75 B Brick work in C.M. (1:4) in foundation and plinth …. do….do....[5.2.6] |
| 9 | Providing & laying in position M20 grade of reinforced cement concrete in nominal mix of (1:1.5:3) upto plinth level….do….do….E/I [5.3.9.1] |
| 10 | Providing & laying in position M20 grade of reinforced cement concrete in nominal mix of (1:1.5:3) in column above plinth level….do….do….E/I [5.3.10] |
| 11 | Providing & laying in position M20 grade of reinforced cement concrete in nominal mix of (1:1.5:3) in beam, roofs having slope upto 15 degree landing, balconies, chajja, lintels, …..... above plinth level, excluding cost of centering, shutterig, finishing and reinforcement ….do….do….E/I [5.3.11] |
| 12 | Providing designation 75A Brick work in C.M. (1:4) in superstructure …. Do…..[5.2.10] |
| 13 | Providing reinforcement in footing, column and beam @ 80 kg per m3 ...do…do……….E/I. |
| 14 | Taking 8mm dia bar 30% (5.5.4) |
| 15 | Taking 12 to 16 mm dia bar 70% [5.5.5 (b) & © |
| 16 | Providing designation 75 A brick on edge flooring in cement mortar (1:4) with top surface flush pointed in cement mortar (1:4) with approved quality of sand including the cost of curing, taxes, royalty all complete as per building specification and direction of E/I. [5.6.6] |
| 17 | Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointed with white cement including rubbing, polishing and cost of curing taxes, and all complete as per building specification and direction and of E/I. (i) With \\"A\\" grade white Tiles. [5.6.23.1] |
| 18 | Providing and laying 6mm thick rough grit wash mosaic in exterior walls of approved texture and colour with 4mm down marble chips of approved texture shade, size and uality with 100% ordinary cement over 12mm thick cemnt plaster (1:3) base, …......... including cost of curing, taxes and royalty all complete as per building specification and direction of E/I. [5.6.17] |
| 19 | Providing and laying 25mm thick kotah stone tiles in risers of steps, skirting and pillars of approved size, texture and colour laid over 12mm thick cement mortar (1:3) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including including rubbing to granolithic finish with approved uality of carborandum stone including cost of curing, taxes and royalty all complete as per building specification and direction and of E/I. [5.6.20] |
| 20 | Plastering of 12 mm thickness with CM (1:4)…do…do…E/I. [5.7.3] |
| 21 | Providing two coats of dry plastic emulsion paint of approved shade and make over a primer coat over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding, washing of floors and taxes all complete as per building specification and direction E/I. [5.8.21] |
| 22 | Supplying fitting and fixing M.S. 40x40x4mm is2062 Grade A M.S. angle, hoisting steps, welded with 6mm dia and 75mm long M.S. rods, anchorage fixed in concrete steps at the time of casting including taxes all complete as per direction of E/l.[5.5.33] |
| 23 | Supplying, fitting and fixing M.S. grill made of 20x6mm M.S. flat/square bar as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/I. [5.5.12] |
| 24 | Supplying, fitting and fixing fully glazed sleel door,window or ventilation of standard rolled 'Z' and mullion steel section and size as per IS-1038 joints met and welded with 100x16x3mm M.S. lugs fixed in cement concrete (1:2:4) blocks 15x10xx10cm, size including cost of oxidised iron fittings with hinges, handles per steps, catch springs, 3mm thick plain glass panes with Aluminium beads and inner frame fixed with lugs with 20mm long 6.3mm G.I. counter sunk machine screw and nuts and applying a coat of red lead paint carriage to work site hoisting and placing in position in all storys and taxes all complete as per building specification and direction and of E/I. [5.5.18] |
| 25 | Labour for fitting and fixing G.C.I. or C.A. sheet roofing in proper slope including the cost of \\"J\\" or \\"L\\" hooks, limpet and bitumen washers, carriage of sheets to work site, and taxes all complete as per building specification and direction of E/I.[5.9.10] |
| 26 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%) total coated thickness with zinc coating 120 grams per sm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scartches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheel shall be fixed using self drilling /self tapping screws of size (5.5x5.5 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cuttingto size and shape wherever reuired. [D.S.R. 12.50] |
| 27 | Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well ascurvilinear portions of the building, for all heights and all levels etc. including (a) Structural analysis & design and preparation of shop drawings for pressureequalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design (b) Providing, fabricating and supplying and fixing panels of aluminiumcomposite panel cladding in pan shape in metalic colour of approved shadesmade out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF/Lumifion based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. (c) The fastening brackets of Aluminiurn alloy 6005 T5/MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per (i) Partition wall |
| 28 | Supplying, fitting and fixing 20 guage G.C.I. sheet gate fitted on M.S. Angle frame of size 60x60x6mm. Including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size, applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I. [5.5.29] |
| 29 | Supplying fitting and fixing 35mm thick solid core type decorative single leaf flush door shutter with both sides decorative veneered with black board core bended with high quality phenol formal dehydes synthetic resin of standard make with Aluminium fittings such as hinges, tower bolts, handles, cleats and sand blocks and taxes all complete as per building specification and direction of E/l.[5.4.32] |
| 30 | Supplying, fitting and fixing glass panes including supplying putty, beads and nails after taking out old and broken glass panes and disposal of debris all complete as per building specification and direction of E/I {4mm Hammered} [BCD 5.4.57.3] |
| 31 | Centering and shuttering including strutting propping etc. and removal of form . [5.3.17.1] |
| 32 | Door closer with fittings [MR] |
| 33 | ELECTRIC WORK : Wiring for light/power plug with 2x4 Sq.mm FR PVC Insulated copper conductor songle core cable In surface/recessed PVC condult along with 1 No. 4 Sq.mm FR PVC Insulated copper conductor single core cable for loop earthing etc. as required. |
| 34 | Ceiling Fan (1400 mm) [M-773] |
| 35 | ITC Celling Fan : Installation, testing and commissioning of ceiling fan, Including wiring the down rods of standard length (Up to 30 cm) with 1.5 sq. mm. FRPVC Insulated, copper conductor,single core cable etc, as required. |
| 36 | S/F Ceiling Rose: Supplying and fixlag 2 pin celling rose on the existing junction box/ wooden block Including connection etc as required. |
| 37 | S/F Modular type electronic fan regulator: Supplying and fixing stepped (two module) type fan regulator on the modular plate etc as required. |
| 38 | S/F light plug point with modular type accessories supply and fixing GI box with modular plate and cover in front on surface or in recess including providing and fixing 5 pin, 5/6 Amp modular socket outlet and 5/6 type switch connection [JSR 1.31] |
| 39 | S/F light plug point with modular type accessories supply and fixing GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin, 15/16 Amp modular socket outlet and 15/16 type switch connection [JSR 1.32] |
| 40 | S/F SP MCB DB: Supplying and fixing following way, single pole and neutral sheet MCB distribution board, 240 volts on surface/ recess complete with tunned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, Interconnections, phosphatised and powder painted Including earthing etc. as required (But without MCB/RCCB/ISOLATOR). (J.S.R.) 2.8 12 way (Double Door)2.8.9 |
| 41 | S/F 'C' series SP MCB: Supplying and fixing 240 volts, 'C' series, miniature drcuit breaker suitable for Inductive loads of following poles In the existing MCB DB complete with connections, testing and cornemissioning etc, as required.[(J.S.R.) 2.12] |
| 42 | 6/32A Single Pole [2.12.1] |
| 43 | 40A DP MCB (To use as Incommer for all SP MCB DB-12 way) [2.12.6] |
| 44 | ITC fluorescent fitting directly on surace:- Installation, testing and commissioning of Pre-wired fluorescent fitting/compact fluorescent fitting of all types, complete with all accessories and tube etc.directly on surace of celling/ wall, Including connection with 1.5 Sq. mm. FR PVC Insulated, copper conductor, single core cable and earthing etc. as required. [JSR 1.41] |
| 45 | Recess mounting LED square down light (18/20 W) [M-828] |
| 46 | Exhaust fan (Metal) 380mm [M776] |
| 47 | ITC exhaust fan upto 510 mm sweep :- Installation of exhaust fan upto 510 mm sweep in the existing opening , including making the hole to suit the size of the above fan, making good the damage, connection, testing, commisioning etc. as required [J.S.R. 1.49] |
| 48 | 16\\" (400mm) Wall mounted fan [M-777] |
| 49 | SANITARY & WATER SUPPLY WORKS : Supplying, fitting and fixing 40mm high vitreous white glazed earthen E.W.C. with 'P' trap of parry hindustan or any other approved I.S.S. make including supplying and fixing 15 litres C.I. mosquito proof low down flushing cistern of approved make with complete fittings with C.I. handle and R.S. or bracket with telescopic flush pipe with brass coupling and plumbers joints spindles stop cock of approved uality weight not less than 450 grams 15mm P.V.C. alkathene pipe 45cm long with brass coupling at both ends and white/black plastic solid state seal and lead of commander cockoo or other I.S.S. make with hinges or screws etc. painting pipe and cistern etc. with 2 coats of approved paint over a coat or red oxide priming, all complete as per specification and direction of E/I. [ DWSD 3.2.2] (ii)E.W.C. with 'S' trap (a) 12.5 lit. low level C.I. cistern |
| 50 | Supplying, fitting and fixing vitreous white glazed earthen ware wash hand basin of parry or Hindustan or any other I.S.S. approved make Supported on painted C.I. or R.S. brackets 32mm C.I.brass waste, 15mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350grams, 32mm P.V C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complète as per specification and direction of E/I.[ DWSD 3.2.5] |
| 51 | Supplying fitting and fixing white glazed fire's clay sink of approved make with overflow arrangements supported on C.I. or R.S. painted brackets 40mm. dia C.P.brass waste with C.P.brass chain and rubber plug 40 mm dia P.V.C. waste pipe about 750mm long with brass coupling at one one endand 15mm C.l. body brass spindle bib cock of approved quality of weight not less than 450grams, including cutting A wall and making good the same etc. all complete as per specification and direction of E/I.[ DWSD 3.2.5] (i) Kitchen sink 600mmx450mmx250mm |
| 52 | Providing and fixing 15mm size C.P. brass pillar cock (Weight not less than 350gms) C.I. body brass spindle pillar cock of approved quality, all complète as per specification and direction of E/I. [ DWSD 3.1.11] (b) C.I. body brass spindle |
| 53 | Cutting chajja or cornice for laying G.I. pipes and restoring the same with R.C.C. (1:2:4) brick work in cement mortar (1:4) and cement plaster (1:4) as per specification and direction of E/I. [ DWSD 3.1.17] |
| 54 | Making holes in walls for laying G.I. pipes and restoring th same after pipe laying as per specification and direction of E/I. [ DWSD 3.1.18] (b) 250 mm thick wall |
| 55 | Supplying, fitting and fixing following items complete with all materials as per specification and direction of E/I. [3.1.21] |
| 56 | (a) Glass shelf with C.P. brass rail |
| 57 | (i) 600 x 125mm glass shelf complete |
| 58 | (b) Mirrors of 6mm thick plate glass bevelled edge mirror including C.P. brass revolving fittings 3mm ply wood board and C.P. hinges to fix with mirror |
| 59 | (i) 600mm x 450mm size |
| 60 | (c)(i) C.P. brass towel rail 20mm x600mm with bracket container |
| 61 | (iii) C.P. brass liquid soap container |
| 62 | Supplying materials and construction of brick masonry drain over 50mm thick P.C.C. [1:3:6] over a brick flat soling, 150mm wide and 250mm avg depth with 250mm with brick work in C.M. [1:6] in apron on both sides and 12mm cement plaster [1:3] with neat cement punning on exposed surface all complete job as specification and direction of E/I. [ DWSD 3.1.24] |
| 63 | Providing & fixing Chlorinated polyvinyl chloride (CPVC) pipes …do…do….E/I. [DSR 18.8] (18.8.3) 25mm dia nominal bore |
| 64 | Providing & fixing Chlorinated polyvinyl chloride (CPVC) pipes …do…do….E/I. [DSR 18.9] (18.9.10) 150 mm nominal inner dia pipes |
| 65 | Providing & fixing on wall face UPVC rigid pipe including jointing with sealing …do…do…E/I. [DSR 12.41.2] |
| 66 | Providing & fixing G.I. fitting of approved make all complete job as specification and direction of E/I. [ DWSD 3.1.13] |
| 67 | (1) Elbow |
| 68 | © 25mm dia |
| 69 | (2) Tee (plain) |
| 70 | (d) 32mm dia |
| 71 | (4) Nipple |
| 72 | (d) 32mm dia |
| 73 | (7) Union Socket |
| 74 | (d) 32mm dia |
| 75 | (8) Socket |
| 76 | (d) 32mm dia |
| 77 | Carriage of Materials |
| 78 | Sand 1Km(K) + 5Km(P) |
| 79 | Cement 5Km(P) |
| 80 | Chips 1Km(K) + 40Km(P) |
| 81 | Bricks 1Km(K) + 7Km(P) |
| 82 | Reinforcement bar 5Km(P) |
| 83 | Add 18% GST |
| 84 | Adding Labour Cess @ 1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysSep 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender