Tender For Construction Of Security / Guard Room And Store At Anand Dham Ashram At Quanoongopora Hushroo.
Tender Value
9.46 Lakhs
Estimated cost
Bid Submission
18 Sep 2026
3 days left
EMD
18920
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Budgam → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Security / Guard Room And Store At Anand Dham Ashram At Quanoongopora Hushroo.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil : |
| 2 | Providing & Laying of stone soling (dully hand packed) including watering dressing and ramming with all carriages loading un-loading and stacking etc complete |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 5 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 6 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 7 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded |
| 8 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form work for |
| 10 | Foundations, footings, bases for columns |
| 11 | Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 12 | Suspended floors, roofs, landings, balconies and access platforms. |
| 13 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 infoundation and plinth including curing in : ement mortar 1:6 ( 1 cement : 6 coarse sand) incl. Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 14 | Providing wood work in frames, of doors, windows clerestory windows and other items KD wood wrought framed and fixed in position with hold fast lugs of with dash fasteners of required dia and length all complete |
| 15 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (KD wood 35mm thick |
| 16 | Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B), fixing with butt hinges of required size with necessary screws, all complete as per directions of Engineer- in-charge and panelling with panels of :12 mm thick pre-laminated particle board (decorative lamination on one side and other side balancing lamination) grade-I, medium density flat pressed three layer particle board FPT-I or graded wood particle board FPT-I, IS: 3087 marked, bonded with BWP type synthetic resin adhesive as per IS: 848 and prelaminated conforming to IS: 12823, Grade-I, Type-II marked : |
| 17 | Providing and fixing wire gauze shutters using galvanized M.S wire gauze of average width for aperture 1.4mm in both directions with wire of dia. 0.63mm for doors, windows and clerestory windows with ISI marked M.S pressed butt hinges brigh finished of required wize with necessary screws as per direction of Engineer in-charge KD Wood. |
| 18 | 12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) |
| 19 | 6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand) |
| 20 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1 mm thick |
| 21 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) |
| 22 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20 mm nominal size stone aggregate. |
| 23 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 24 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work |
| 25 | Providing and fixing coloured corrugated Galvanized Steel (GS) sheet roofing, including vertical and curved portions, complete with polymer-coated sheets, necessary overlaps, fasteners, washers, ridge/edge flashing and all required accessories, properly aligned and fixed to the supporting framework, complete in all respects as per drawings, specifications and the directions of the Engineer-in-Charge. |
| 26 | Providing ridges of hips of width 60cm overall width plain GS sheets fixed with polymer coated J of L hooks bolts & nuts 8mm dia GI & bitumen washers complete 0.50mm thick with zinc coating not less than 275 g/sqm |
| 27 | Providing and fixing of soffit using 0.35mm thick color GI sheets |
| 28 | Providing and fixing of eavesboard using 0.35mm thick color coated GI sheets |
| 29 | Providing and fixing ISI marked oxidized M.S tower bolt black finish (barrel type) with necessary screws etc complete) |
| 30 | 200x10 mm |
| 31 | 150x10 mm |
| 32 | Providing and fixing ISI marked oxidized M.S handles conforming to ISI: 4992 with necessary screws etc complete) 125 mm |
| 33 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels (Area of slab over 0.5 sqm) |
| 34 | Carriage of materials from source to site of work including loading unloading complete. |
| 35 | stone Agg. Above 40mm For an avg. lead of 10 Km |
| 36 | stone Agg. below 40mm For an avg. lead of 10 Km |
| 37 | sand for an avg. lead of 10 Km |
| 38 | Bricks for an avg lead of 10 kms Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysSep 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender