Tender For Repair And Renovation Of The Old Quarter At Sub-Division Vailoo And The Je Quarter At Dessu
Tender Value
4.68 Lakhs
Estimated cost
Bid Submission
18 Sep 2026
2 days left
EMD
9378
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Anantnag → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Renovation Of The Old Quarter At Sub-Division Vailoo And The Je Quarter At Dessu
BOQ
| Sl. No. | Item Description |
| 1 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:4 ( 1 cement : 4 coarse sand) |
| 2 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 3 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 25mm thick with 12.5 mm nominal size stone aggregate. Coping |
| 4 | 12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 coarse sand) |
| 5 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick |
| 6 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) |
| 7 | Providing and fixing CP Brass wall mixer of quality & make as approved by Engineer in charge. 15 mm nominal dia |
| 8 | Providing and fixing 15 mm nominal bore C.P. brass angle valve forbasin mixer and geyser points of approved make conforming to IS : 8931 |
| 9 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931 |
| 10 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved makeand shade with 6 mm thick hard board backingRectangular shape 453x357 mm |
| 11 | Providing and fixing of complete Bathroom Accessories Set consisting of towel rack (24\\"), towel ring, soap dish with holder, and toilet brush with case, all made of CP brass / stainless steel (SS-304) of approved make and design, fixed in position at required locations with necessary screws, wall plugs, and fixtures including drilling of tiles/walls, making good the surfaces, and all labour, tools & tackles, etc., complete in all respects as directed by Engineer-in-charge. |
| 12 | Providing and Fixing of imported wooden 12 mm thick T&G panelling fixed on frame work of 12 mm thick flat pressed 3 layer medium density particle board or graded particle board (Grade I) IS: 3087 marked, in walls, ceiling with necessary nails, cornice, adhesives etc. complete and French spirit polishing, Two or more coats on new works including a coat of wood filler |
| 13 | Providing and fixing 10 mm thick premium quality WPC (Wood Plastic Composite) fluted wall panelling of approved make, colour, texture and pattern on walls, fixed over existing wall surface using approved polymer-based construction adhesive and mechanical fasteners wherever required, including cutting to size, edge finishing, matching trims, corner profiles, joint treatment, alignment, levelling, and complete installation as per manufacturer's specifications and the direction of the Engineer-in-Charge. |
| 14 | Providing and fixing PVC wall/ceiling panelling comprising 8–10 mm thick, tongue-and-groove interlocking PVC panels of approved colour, shade and texture, fixed over a framework of treated wooden battens at suitable spacing with screws, rawl plugs and approved fasteners. The joints shall be neatly interlocked and finished with matching PVC corner trims, edge mouldings, H-joints, end caps and other necessary accessories to provide a smooth and aesthetically finished surface. |
| 15 | Supply, installation, testing and commissioning of Split Type Air Conditioner of approved make (Daikin/Hitachi/Blue Star/Voltas/LG or equivalent), complete with indoor and outdoor units, inverter rotary compressor, copper condenser, R32/R410A refrigerant, cordless remote control, wall mounting brackets, interconnecting insulated copper refrigerant piping up to 3.0 m, condensate drain pipe, control cable, outdoor unit stand, necessary fasteners, vibration pads, refrigerant gas charging (if required), testing and commissioning, complete as per manufacturer's specifications and directions of Engineer-in-Charge. |
| 16 | Supply, installation, testing and commissioning of wall-mounted RO + UV + UF Water Purifier of approved make (Kent/Aquaguard/Livpure/AO Smith/Havells or equivalent) having minimum 8–10 litres storage capacity and purification capacity of 10–15 LPH or as specified. The unit shall be complete with RO membrane, sediment filter, activated carbon filter, UV chamber, UF cartridge, TDS controller/mineralizer (where applicable), food-grade storage tank, and all accessories. |
| 17 | Providing and fixing wardrobe/storage cabinet of 300 mm depth using 19 mm thick commercial/BWR plywood for sides, top, bottom, shelves and shutters and 12 mm thick plywood for back panel, finished with 1.5 mm thick decorative laminate (Sunmica) on exposed front faces, complete with all necessary fittings such as SS hinges, magnetic catches, handles, locks, shelf supports, screws and other hardware, including cutting, fitting, edge finishing, transportation, labour, tools & tackles and all incidental works complete as directed by the Engineer-in-Charge. (measurement on front face only) |
| 18 | Providing, fixing, testing and commissioning of 8 Watt LED Bulb of approved make (Philips/Havells/Wipro/Crompton/Bajaj or equivalent), |
| 19 | Providing, fixing, testing and commissioning of 400 mm sweep wall-mounted oscillating fan of approved make, suitable for 230 V, single-phase AC supply, complete with wall mounting bracket, regulator (if required), all fixing accessories, wiring from the nearest connection point, testing and commissioning, including all labour, materials and incidental charges, complete as directed by the Engineer-in-Charge. |
| 20 | Finishing with Deluxe multi surface paint system for interiors andexteriors using primer as per manufacturers’ specifications: Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @0.90litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm ofapproved brand and manufacture |
| 21 | Providing, supplying, installing, testing and commissioning of 1500 VA capacity pure sine wave inverter with 1 No. 12 Volt, 200 Ah capacity tall tubular battery, including battery terminals, 1 kW Automatic Transformer, interconnecting cables, lugs, necessary accessories and connections, complete in all respects as required for satisfactory operation. |
| 22 | Providing, supplying, installing and commissioning of single door refrigerator, complete with all accessories, testing and commissioning, as required for satisfactory operation. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysSep 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender