Tender For Restoration Of Shrine Shaheed Syed Ali Mosvi (Sams Din Saani) And Allied Works At Gariend Kalan Budgam
Tender Value
3.17 Crore
Estimated cost
Bid Submission
28 Sep 2026
13 days left
EMD
6.34 Lakhs
Bank guarantee accepted
Document Fee
5500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Budgam → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Restoration Of Shrine Shaheed Syed Ali Mosvi (Sams Din Saani) And Allied Works At Gariend Kalan Budgam
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 10-Sep-2026 | Corrigendum | Other | 28-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Prayer Hall on Heritage Pattern |
| 2 | Clearing jungle including uprooting of vegetation, grass, bush wood, trees and saplings of girth upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50m outside the periphery of the area cleared |
| 3 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed. All kinds of soil. Rate for a leadupto 1 meter from cutting edge |
| 4 | Providing and laying of hand packed stone boulder before laying of mud mat compacted consolidated rammed filling the voids compacting all complete carriage upto site of work all head loads complete job. |
| 5 | Providing and laying in position cement concrete of specified grade including curing butexcluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 20 mm nominal size) |
| 6 | Providing and laying in position specified grade of reinforced cement concrete includin curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 7 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°,landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size |
| 8 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level TMT bars |
| 9 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mmnominal size) |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form work for Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form for Lintel, beams, plinth beams, girders,bressumers and cantilevers. |
| 12 | Supplying & filling of Sand/ Nallah Muck under floors incl. watering, ramming, consolidating and dressing incl. all carriages, leads and lifts |
| 13 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 14 | Providing and laying chisel dressed Devri Stone in cement mortar 1: 6 (1 cement : 6 coarse sand) upto plinth level including curing. One face dressed. Fine chisel dressed |
| 15 | P/f of Devri Stone fine chiselled Ornamental Cornice 150mm in 1:6 Mix incl pointing in 1:2 Mix and also moulding of the edges as per the approved deisgn and pattern including cost & all carraiges upto the site |
| 16 | Tile brick masonry with common burnt clay tile bricks of class designation 10 in foundation and plinth including curing complete in Cement lime mortar 1:1:6 (1 cement : 1 lime putty : 6 fine sand) Maharaji Bricks |
| 17 | P/f of Devri Stone fine chiselled pedestal 18\\"x18\\" x 24\\" in 1:6 Mix incl pointing in 1:2 Mix and also moulding of the edges and top slot for pedestal with depressed portion to hold the wooden post as per the approved deisgn and pattern including cost & all carraiges upto the site |
| 18 | Providing and fixing of ornamental type vertical posts of first class Kashmiri deodar wood of approved pattern and design including providing and applying two or more coats of touch wood polishing etc. complete in all respects.(size 9”x9” dia. & upto 13’.0” height) including all carriages by mechanical transport and by water transport upto site of work complete in all respects. |
| 19 | Providing and fixing of ornamental type vertical posts of first class Kashmiri deodar wood of approved pattern and design including providing and applying two or more coats of touch wood polishing etc. complete in all respects.(size 9”x9” dia. & upto 12’.0” height) including all carriages by mechanical transport and by water transport upto site of work complete in all respects. |
| 20 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fastenersshall be paid for separately): First class Kashmiri deodar wood |
| 21 | Extra for circular works, First class deodar wood |
| 22 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 23 | Providing and fixing of 20mm dia 450mm long bolt full thread with nuts andwashers for anchoring the wooden structure incl welding the bolts at bottom with 20 mm flat iron strip of at least 200mm long complete job. |
| 24 | Providing and fixing of 32mm panneled or pannelled and glazed shutters for window and clearstorey windows incl. ISI marked black enamled MS But hings with necessary screws using 1st class kail wood (french style) |
| 25 | a). Windows Shutters |
| 26 | b). Wire Gauge Shutters |
| 27 | c). 32mm Panelled Door Shutter using 1st class kail wood with carving on both sides as per the approved pattern complete job |
| 28 | P/F of 12mm thick heavy duty Ornamental hardware items incl cost necessary |
| 29 | a)Tower bolts 100mm |
| 30 | b)Handle 125mm |
| 31 | c) I Hook 125mm |
| 32 | d)Tower bolts 200mm |
| 33 | e)Handle 200mm |
| 34 | f) Ornamental L-Drop |
| 35 | Providing and fixing of 3.5 mm thick Coloured Kashmiri glass panes including Beading & necessary nails complete. |
| 36 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length First class kail wood (Approved Pattern for Pinjra work) |
| 37 | Providing and fixing of Pinjra Kari Heritage type work as per approved pattern / design of 1st class Kashmiri local budloo wood complete job including Beading & necessary nails. (including cost of all material, leads, lifts and carriages etc upto site of work complete) |
| 38 | Providing and fixing of 3.5 mm thick clear float glass panes including Beading & necessary nails complete. |
| 39 | Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates or like components including cost of screws etc. complete First class Kashmiri local Budloo wood |
| 40 | Providing & fixing coated Corrugated profile sheets 0.50 mm including providing ridges or hips of width 60 cms over all width plain Colour coated Sheetsusing self drilling and self tapping fasteners of reputed make with purlins sheet using self drilling and self tapping fasteners (including cost of all material, leads, lifts and carriages etc upto site of work complete) with required head load complete. |
| 41 | Providing ridges or hips of width 60 cms over all width plain Colour coated Sheets fixed with nails and GI limpet washer (including cost of all material, leads, lifts and carriages etc upto site of work complete) with required headload complete.. |
| 42 | Providing and fixing of Ornamental Second class Kashmiri local Deodar wooded eaves boarding 300x30 mm (nominal size) as per the approved/available pattern and design incl cost of nails Complete job, incl. cost of Touch wood with sealer over prepared base/ Matt finish Paint / Finishing to be approved by Engineer-in-charge. Finishing to be approved by Engineer-in-charge. |
| 43 | P/F of 12 mm thick Panelled/ overlapped planks made of 1st class Deodar wood as per the approved/available pattern and design for roof soffits & Ceiling on wood work in false ceiling, partitions sawn and put-up in position in budloo wood (Frame work). including cost of necessary adhesive & cost of nails etc. complete job. incl cost of nails / screws & cost of Touch wood with sealer over prepared base / Finishing to be approved by Engineer-in-charge. |
| 44 | P/F of 12 mm thick ornamental Panelled tiles made of 1st class walnut & Budloo wood as per the approved/available pattern and design for walls & Ceiling on wood work in false ceiling, partitions sawn and put-up in position in budloo wood (Frame work). including cost of necessary adhesive & cost of nails etc. complete job. incl cost of nails / screws to be approved by Engineer-in-charge. |
| 45 | Providing and fixing of KHATAM BANDI ceiling of first class Kashmiri Local budloo wood excluding the cost of frame work which is to be paid separately, Heritage pattern and design to be approved by Engineer-in-charge. (PahalGardan) |
| 46 | Providing and fixing of 10mm thick commercial plywood including cost of nails/ screws complete job. (Frame work shall be paid for separately). |
| 47 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position: Kashmiri Local Budloo wood |
| 48 | Providing and fixing wooden moulded corner beading of size 40 x 40 mm (base and height) of triangular shape to the junction of paneling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete. Second class kailwood |
| 49 | Providing & applying of sand sealer and preparing the surface for final finish with touch wood Polishing on the sealer surface with spray gun all complete job. |
| 50 | Applying priming coat: With ready mixed pink or grey primer of approved brandand manufacture on wood work (hard and soft wood) |
| 51 | Painting with synthetic enamel paint of approved brand and manufacture togive an even shade. Two or more coats on new work |
| 52 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 53 | Pointing with 1:2:1 (1 Non-Hydrated lime, 2: sand, 1: Surkhi) as per the Conservation & methodology procudure (using Gour/Gud, Urad dal, husk, methi, resa, Gealfal and all required materials) including Head load etc charges complete job. |
| 54 | 15mm thick plaster 1:2:1 (1 Non-Hydrated lime, 2: sand, 1: Surkhi) as per the Conservation & methodology procudure (using Gour/Gud, Urad dal, husk, methi, resa, Gealfal and all required materials) including Head loadetc charges complete job. |
| 55 | Carriage of material by mechanical transport ,including loading, unloading & stacking complete |
| 56 | (a) Sand from source for an average lead of 20km |
| 57 | (b) Stone agg. 40mm and below for an lead of 20km. |
| 58 | C ) Bricks from source for an avg. lead of 20 km. |
| 59 | Ornamental Devri informatory signage boards |
| 60 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil : 1 meterfrom cutting edge |
| 61 | Providing and laying of stone soling hand packed and compacted with hand roller including carriage complete. |
| 62 | Providing and laying in position cement concrete of 1:4:8 grade excluding the cost of centering and shuttering. All work upto plinth level (Crushed aggregate 40mm). |
| 63 | Providing and laying in position cement concrete of specified grade excluding cost of centeringand shuttering 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 64 | Providing and laying chisel dressed Devri Stone of size 300x200 mm face with 150 mm depth lime mortar 1:1:6 ( 1 lime putty :1 Surkhi : 6 fine sand) including pointing with 1:2 ( 1 Lime : 2 fine sand) upto plinth level including curing. One face dressed (Fine chisel dressed) |
| 65 | Extra for fine chisel dressed Devri Stone in square or rectangular Pillars |
| 66 | Stone work in plain Ashler in cornices 100mm , in cement mortar1:6 (1 cement :6 course sand) including pointing with cement mortar 1:2 (1 white cement :2 stone dust) with an add mixture of pigment matching the stone shade (Devri stones fine chiseled dressed) and including all leads, lifts & all carriage upto site of work complete. |
| 67 | Manufacturing supplying and fixing stainless steel overhead signage boards made up of 2mm thick Stainless steel sheet as approved by Engineer-in-charge; letters, borders etc. as per IRC : 67-2001 and fixing the same to the plate of structural frame work of stainless steel by means of suitable sized aluminum alloys, rivets or bolts and nuts @ 300mm c/c all along the periphery as well as in two vertical rows along with theft resistant measures. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawing, specification and direction of Engineer-in-charge (Structural frame work including S.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment). |
| 68 | Engraving letters over Stainless steel plate with laser technology including all geometrical features with Logos complete job as per the sample to be provided by the Engineer-in- charge (engraving to be done in English/ Hindi & Urdu) |
| 69 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 70 | Carriage of material by mechanical transport including loading, unloading & stacking complete. |
| 71 | (a) . Sand from source for an average lead of 20 km. |
| 72 | (b). Stone agg. 40mm and below from source for an avg lead of 20 km. |
| 73 | External front Side Walling by way of Ornamental devri Pillars & Cast iron Grill. |
| 74 | Dismantalling/ Removing of existing grill/ Chain Link fencing with gas cutter / welding machine including brick wall incl. pillars/ CGI sheets etc and disposal of unserviceable materials and stacking of serviceable material as per instructions of Engineer Incharge |
| 75 | Providing and laying in position cement concrete of 1:4:8 grade excluding the cost of centering and shuttering. All work upto plinth level (Crushed aggregate 40mm). |
| 76 | Providing and laying in position reinforced cement concrete 1:1.5:3 (1 Cement: 1.5 coarse sand: 3 graded Stone aggregate 20mm nominal size) excluding cost of centering, shuttering, finishing and reinforcement. All work upto plinth level. |
| 77 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 78 | Reinforcement for RCC work including strengthening, cutting, bending, placing in position and binding all complete cold twisted bars TMT Steel. |
| 79 | Providing & fixing of Ornamental Cast iron/Antique Grill (wrought Iron) including vertical post & strut of required size and design as per the heritage pattern/ drawing complete job incl. fastners/ required anchoring as per the directions of the Engineer-in-charge at site including priming / Golden and black painting coats of approved steel primer / paint (mat finish) and all carriages upto site of work complete in all respects. |
| 80 | Providing and laying chisel dressed Devri Stone of size 300x200 mm face with 150 mm depth in cement mortar 1: 6 (1 cement : 6 coarse sand) upto plinth level including curing. One face dressed. A). Fine chisel dressed |
| 81 | Extra for fine chisel dressed Devri Stone in square or rectangular Pillars |
| 82 | Stone work in plain Ashler in cornices 100mm , in cement mortar1:6 (1 cement :6 course sand) including pointing with cement mortar 1:2 (1 white cement :2 stone dust) with an add mixture of pigment matching the stone shade (Devri stones fine chiseled dressed) and including all leads,lifts & all carriage upto site of work complete. |
| 83 | Centering and shuttering including strutting, propping etc. and removal of form work for Walls (any thickness) incl attached pilasters, buttresses, plinth and string courses etc |
| 84 | Carriage of material by mechanical transport, including loading, unloading & stacking complete. |
| 85 | (a) Sand from source for an average lead of 20 km. |
| 86 | (b) Stone agg. 40mm and below for an average lead of 20 km. |
| 87 | Walling with Ornamental MS Fencing. |
| 88 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stackingwithin 50 meters lead. |
| 89 | Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as perdirection of Engineer-in-charge in cement mortar |
| 90 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:4:8 or leaner mix (i/c equivalent design mix) (Removal/ Dismantalling) |
| 91 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed All kinds of soil. Rate for a lead upto 50 meter beyond 1 m from cutting edge |
| 92 | Providing and laying of stone soling hand packed and compacted with hand roller including carriage complete. |
| 93 | Providing and laying in position cement concrete mix (1:4:8) of specified grade including curing butexcluding the cost of centring and shuttering. All work upto plinth level with: |
| 94 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 95 | Providing and laying in position specified grade of reinforced cement concrete includin curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 96 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level TMT bars |
| 97 | Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases for columns |
| 98 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc.,including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless |
| 99 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work |
| 100 | Carriage of material by mechanical transport including loading, unloading &stacking complete. |
| 101 | (a) . Sand from source for an average lead of 20 km. |
| 102 | (b). Stone agg. 40mm and below for an avg lead of 20 km |
| 103 | Pedestrian Devri Path / Steps |
| 104 | Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge All kinds of soil |
| 105 | Providing and laying of stone soling hand packed and compacted with hand roller including carriage complete. |
| 106 | Providing and laying in position cement concrete mix (1:4:8) of specified grade including curing butexcluding the cost of centring and shuttering. All work upto plinthlevel with: |
| 107 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 108 | Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases for columns |
| 109 | Providing and laying chisel dressed Devri Stone of size 300x200 mm face with 150 mm depth in Lime mortar 1: 2 (1 Lime; 2 coarse sand) upto plinth level including curing. One face dressed. Rough chisel dressed |
| 110 | Carriage of material by mechanical transport including loading, unloading &stacking complete. |
| 111 | (a) . Sand from source for an average lead of 20 km. |
| 112 | (b). Stone agg. 40mm and below from source for an avg lead of 20 km |
| 113 | Construction of Ornamental Devri Gates. |
| 114 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed All kinds of soil. Rate for a lead upto 50 meter beyond 1 m from cutting edge |
| 115 | Providing and laying of stone soling hand packed and compacted with hand roller including carriage complete. |
| 116 | Providing and laying in position cement concrete mix (1:4:8) of specified grade including curing butexcluding the cost of centring and shuttering. All work upto plinth level with: |
| 117 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 118 | Providing and laying in position specified grade of reinforced cement concrete includin curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 119 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°,landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 gradedstone aggregate 20 mm nominal size |
| 120 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level TMT bars |
| 121 | Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases for columns |
| 122 | Centering and shuttering including strutting, propping etc. and removal of form forSuspended floors, roofs, landings, balconies and access platforms. |
| 123 | Centering and shuttering including strutting, propping etc. and removal of form for Arches, domes, vaults upto 6 m span |
| 124 | Providing and laying chisel dressed Devri Stone of size 300x200 mm facewith 150 mmdepth in Lime mortar 1: 2 (1 lime: 2 coarse sand) uptoplinth level including curing.One face dressed. Fine chisel dressed. |
| 125 | Extra for fine chisel dressed Devri Stone in square or rectangular Pillars |
| 126 | Stone work in plain Ashler in cornices 100mm , in cement mortar1:6 (1 cement :6 course sand) including pointing with cement mortar 1:2 (1 white cement :2 stone dust) with an add mixture of pigment matching the stone shade (Devri stones fine chiseled dressed) and including all leads, lifts & all carriage upto site of work complete. |
| 127 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished seamless type tubes |
| 128 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work |
| 129 | Carriage of material by mechanical transport including loading, unloading &stacking complete. |
| 130 | (a) . Sand from source for an average lead of 20 km. |
| 131 | (b). Stone agg. 40mm and below for an avg lead of 20 km. |
| 132 | Conservation/ Restoration of existing Single storey shrine. |
| 133 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge 1:4:8 or leaner mix (i/c equivalent design mix) |
| 134 | Providing and laying in position lime concrete with graded stone aggregate 20 mm nominal size and 40% mortar comprising of 1:1:1 (1 lime putty: 1surkhi: 1fine sand) including curing complete but excluding cost of centering and shuttering. All works upto plinth level with: Graded Stone Aggregate |
| 135 | Tile brick masonry with common burnt clay tile bricks of class designation 10 in foundation and plinth including curing complete in Cement lime mortar 1:1:6 (1 cement : 1 lime putty : 6 fine sand) Maharaji Bricks |
| 136 | Pointing with 1:2:1 (1 Non-Hydrated lime, 2: sand, 1: Surkhi) as per the Conservation & methodology procudure (using Gour/Gud, Urad dal, husk, methi, resa, Gealfal and all required materials) including Head load etc charges complete job. |
| 137 | Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead. |
| 138 | Raking out joints in lime or cement mortar and preparing the surface for re-pointing or re-plastering, including disposal of rubbish to the dumping ground within 50 meters lead. |
| 139 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil : |
| 140 | Providing and laying of stone soling hand packed and compacted with hand roller including carriage complete. |
| 141 | Providing and laying in position cement concrete of 1:4:8 grade excluding the cost of centering and shuttering. All work upto plinth level (Crushed aggregate 40mm). |
| 142 | Providing and laying in position cement concrete of specified grade excluding cost of centering and shuttering 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 143 | Providing and laying chisel dressed Devri Stone of size 300x200 mm face with 150 mm depth in cement mortar 1: 6 (1 cement : 6 coarse sand) upto plinth level including curing. One face dressed. |
| 144 | P/f of Devri Stone fine chiselled Ornamental Cornice 100mm in 1:6 Mix incl pointing in 1:2 Mix and also moulding of the edges as per the approved deisgn and pattern including cost & all carraiges upto the site |
| 145 | P/f of Devri Stone fine chiselled pedestal 18\\"x18\\" x 24\\" in 1:6 Mix incl pointing in 1:2 Mix and also moulding of the edges and top slot for pedestal with depressed portion to hold the wooden post as per the approved deisgn and pattern including cost & all carraiges upto the site |
| 146 | Providing and fixing of ornamental type vertical posts of first class Kashmiri deodar wood of approved pattern and design including providing and applying two or more coats of touch wood polishing etc. complete in all respects.(size 9”x9” dia. & 10’.0” height) including all carriages by mechanical transport and by water transport upto site of work complete in all respects. |
| 147 | Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates or like components including cost of screws etc. complete First class Kashmiri local Budloo wood |
| 148 | Providing and fixing of Ornamental Second class Kashmiri local Deodar wooded eaves boarding 300x30 mm (nominal size) as per the approved/available pattern and design incl cost of nails Complete job, cost of Touch wood with sealer over prepared base / Finishing to be approved by Engineer-in-charge. Finishing to be approved by Engineer-in-charge. |
| 149 | P/F of 12 mm thick Panelled/ overlapped planks made of 1st class Deodar wood as per the approved/available pattern and design for roof soffits, walls & Ceiling on wood work in false ceiling, partitions sawn and put-up in position in budloo wood (Frame work 2\\"x1.5\\"). including cost of necessary adhesive & cost of nails etc. complete job. incl cost of nails / screws & cost of Touch wood with sealer over prepared base / Finishing to be approved by Engineer-in-charge. |
| 150 | Providing & fixing coated galvalume Hi-rib profile sheets 0.50 mm TCT having a crest height of 28-32mm at 195mm pitch using self drilling and self tapping fasteners of reputed make with purlins sheet using self drilling and self tapping fasteners (including cost of all material, leads, lifts and carriages etc upto site of work complete) with required head load complete.. |
| 151 | Providing ridges or hips of width 60 cms over all width plain Colour coated Sheets fixed with nails and GI limpet washer (including cost of all material, leads, lifts and carriages etc upto site of work complete) with required head load complete.. |
| 152 | Dismantling of Existing GCI/Ply/Celings/ Wooden partitions/ Trusses etc with glass panes incl. ceilings with disposal of unservicable material & stacking of serviceable material incl. cost of scaffolding as per the direction of Engineer-in-Charge. |
| 153 | Providing plain Colour coated Sheets fixed with nails and GI limpet washer (including cost of all material, leads, lifts and carriages etc upto site of work complete) with required head load complete. |
| 154 | Providing and fixing of KHATAM BANDI ceiling of first class Kashmiri Local budloo wood excludingthe cost of frame work which is to be paid separately, Heritage pattern and design to be approved by Engineer-in-charge. (Pahal Gardan) |
| 155 | Providing and fixing of 10mm thick commercial plywood including cost of nails/ screws complete job. (Frame work shall be paid for separately). |
| 156 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position: Kashmiri Local Budloo wood |
| 157 | Providing and fixing wooden moulded corner beading of size 40 x 40 mm (base and height) of triangular shape to the junction of paneling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete. Second class kail wood |
| 158 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and lengthFirst class kail wood (Approved Pattern for Pinjra work) |
| 159 | Providing and fixing of Pinjra Kari Heritage type work as per approved pattern / design of 1st class Kashmiri local budloo wood complete job including Beading & necessary nails. (including cost of all material, leads, lifts and carriages etc upto site of work complete) |
| 160 | Providing & applying of sand sealer and preparing the surface for final finish with touch wood Polishing on the sealer surface with spray gun all complete job. |
| 161 | Providing and fixing of 5.0 mm thick clear float glass panes including Beading & necessary nails complete. |
| 162 | Providing and fixing of 3.5 mm thick Coloured Kashmiri glass panes including Beading & necessary nails complete. |
| 163 | Providing & fixing of 25mm thick first class Walnut wooden Panells over the walls incl. cost of base work of budloo wood including polishing with PU glossy polish with base sealer as per the directions at site complete job ( 120 No. plates for 99+21 Name of Allah SWT & Wall plates/ murals for Aurad-e-fateh as per Arabic text complete). |
| 164 | Providing wall murals over existing Wallnut wooden plates including writing by way of engraving Arabic Calligrahical names as per the sample available at site or as directed at site complete job with golden colour rendering over the names as desired. ( Available 120 No. plates for 99+21 Name of Allah SWT & Wall plates/ murals for Aurad-e-fateh as per Arabic text complete). |
| 165 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 166 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work |
| 167 | WOODEN FLOORING: Wooden planking, tongued and grooved in flooring including fixing with iron screws complete 25 mm thick Second class Kashmiri local deodar wood |
| 168 | Providing and fixing wooden moulded corner beading of size 50 x 50 mm (base and height) of triangular shape to the junction of paneling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete. Second class kail wood |
| 169 | Providing and fixing of 32mm panneled or pannelled and glazed shutters for window and clearstorey windows incl. ISI marked black enamled MS But hings with necessary screws using 1st class kail wood (french style) |
| 170 | a). Windows Shutters |
| 171 | b). Wire Gauge Shutters |
| 172 | c). 32mm Panelled Door Shutter using 1st class kail wood with carving on both sides as per the approved pattern complete job |
| 173 | P/F of 12mm thick heavy duty Ornamental hardware items incl cost necessary screws etc |
| 174 | a)Tower bolts 100mm |
| 175 | b)Handle 125mm |
| 176 | c) I Hook 125mm |
| 177 | d)Tower bolts 200mm |
| 178 | e)Handle 200mm |
| 179 | f) Ornamental L-Drop |
| 180 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead : Of area of 3 sqm. and below |
| 181 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead : 15.13.1 Of area of 3 sqm. and below |
| 182 | Carriage of material by mechanical transport, including loading, unloading & stacking complete. |
| 183 | (a) Sand from source for an average lead of 20 km. |
| 184 | (b) Stone agg. 40mm and below for an average lead of 20 km. |
| 185 | Providig and fixing approved qaulity fine dressed Devri stone tiles of specified size and thickness (25mm thick) machine cut and hand dressed laid over a base of cement mortor 1:4 (1 cement:4 course sand) incoudicng cutting dressing rubbing edge finishing filling joints with cement slurry mixed with mactching pigment curicng polishing where required and leads lifts carriages of materials labours tolls and tackle complete as per the directions of the Engineer in charge |
| 186 | Construction of Guard Room / Chowkidar Quarter And Wazu Khana/ Ablution Block/ Drinking Water Facilities (06 Units) |
| 187 | Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil. |
| 188 | Earthwork in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc( not exceeding 1.5m in width) & for shafts , wells, cesspits, & the like not exceeding 10 sqm on plan , incl dressing of sides & ramming of bottoms lift upto 1.5m , incl getting out excavated earth & disposal of surplus excavated earth as directed , within a lead of 50mAll kinds of soil: |
| 189 | Supplying and laying of quarry stone soling/plinth filling compacted properly incl ramming,watering and filling of interstices incl all carriage.Complete job |
| 190 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level.1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 20mm nominal size) |
| 191 | Reinforced Cement Concrete (1 cement:1.5 coarse sand:3 graded stone aggregate 20mm nominal size) P/L in position specified grade of reinforced cement concrete incl curing but excluding the cost of centering, shuttering , finishing & reinforcement .All works upto plinth level:.....(A) |
| 192 | P&L in position cement concrete of specified grade incl curing but excluding the cost of centring & shuttering.All work upto plinth level with:1:3:6(1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) |
| 193 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in cement mortar 1:6 (1Cement: 6 coarse sand) including all carriages incl extra for brick work with common burtnt clay bricks/cement concrete bricks in superstructure above plinth upto floor five level |
| 194 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in cement mortar 1:6 (1Cement: 6 coarse sand) including all carriages. |
| 195 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15o , landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral staircases upto five level incl curing but excluding the cost of centring, shuttering, finishing & reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)........(B) |
| 196 | Reinforcement for RCC work incl cutting, bending, binding,placing in position all complete including carriage: TMT bars of grade Fe-500D or more |
| 197 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5m |
| 198 | Cement concrete flooring 1:2:4(1 cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement incl cement slurry & curing complete, but excluding the cost of nosing of steps etc complete50mm thick with 20mm nominal size stone aggregate |
| 199 | Internal 12mm Cement plaster of mix: 1:6(1 cement: 6 fine sand) |
| 200 | Providing and applying white cement based putty of specified thickness of approved brand and manufacture over the plastered surface to prepare the surface even and smooth. 2 mm thick |
| 201 | 6mm cement plaster to ceiling of mix 1:3(1 cement:3 fine sand) |
| 202 | Providing woodwork in frames of doors, windows,clestory windows and other frames , wrought framed and fixed in position with hold fast lugs or with dash fasteners of reqd dia Kiln seasoned and chemically treated imported wood |
| 203 | P&F panelling or panelling & glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows with necessary hardware fittings (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured).Panelling for panelled or panelled & glazed shutters 25mm to 40mm thickKiln seasoned & chemically treated imported wood |
| 204 | P/F glazed shutters for doors, windows & clerestory windows using 4mm thick float glass panes incl ISI marked MS pressed butt hinges bright finished of reqd size with necessary hardware fittings. Kiln seasoned & chemically treated imported wood 30 mm thickness of shutter |
| 205 | P&F wire gauge shutters using galvanized MS wire gauze of avg width for aperture 1.4mm in both directions with wire of dia 0.63mm for doors, windows & clerestory windows with ISI marked MS pressed butt hinges bright finished of reqd size with necessary screws as per direction of EICKiln seasoned & chemically treated imported wood |
| 206 | P&F hardware fittings(alloy) as per approved samples:100mm Handle |
| 207 | 150mm Handle |
| 208 | 100mm Tower Bolts |
| 209 | Stay Hooks |
| 210 | L Drop(10'') |
| 211 | Structural steel work in built up sections , trusses & framed work, incl cutting , hoisting , fixing in position & applying a priming coat of approved steel primer all complete |
| 212 | Providing & fixing tile profiling G.I sheet roofing of approved colour including vertical /curved surface fixed with polymer coated J or L hooks ,bolts and nuts 8mm diameter with bitumen and G.I limpet washers filled with white lead etc excl the cost of purlins , rafters and trusses and incl cutting to size and shape wherever reqd, incl carriage,ridges,valleys etc.Complete job.(0.50mm thick) |
| 213 | P/L polished Granite stone flooring in required design & patterns in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20mm(avg) thick base of cement mortar 1:4(1 cement:4 coarse sand) laid & jointed with cement slurry & pointing with white cement slurry admixed with pigment of matching shade incl rubbing,curing & polishing etc all complete as specified & as directed by the EiC Polished Granite stone slab jet Black,Cherry Red ,Wlite Brown ,Cat Eye or equivalent. |
| 214 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coats on new/old work including one coat of steel/wood primer & carriage of materials upto site of work.Complete job. |
| 215 | P/F WC squatting pan(Indian type WC pan) with 100mm sand cast Iron P or S trap , 10 liter low level white PVC flushing cistern, incl flush pipe (of approved brand) with manually controlled device (handle lever) conforming to IS 7231 , with all fittings & fixtures complete, incl cutting & making good the walls & floors wherever reqd. White vitreous china or Orissa pattern WC pan of size 580x440mm with integral type foot rests |
| 216 | P/F white vitreous china pedestal type WC (European type WC pan) with seat & lid, 10 liter low level white PVC flushing cistern ,incl flush pipe with manually controlled device(handle lever), conforming to IS 7231, with all fittings & fixtures complete , incl cutting & making good the walls & floors wherever reqd: WC pan with ISI marked white solid plastic seat and lid |
| 217 | P/F 8mm dia CP/SS Jet with flexible tube upto 1m long with SS triangular plate to European type WC of quality & make as approved by EIC |
| 218 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-(a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer (Single lever type) of approved brand like Hindware/ Jaquar/Somany.Complete job |
| 219 | Add forProviding 32mm dia CP brass trap |
| 220 | P/F white virteous china china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings |
| 221 | Providing and fixing 15 mm nominal bore C.P. brass Wall mixer of approved brand including all fittings and fixtures of approved brand like Hindware/ Jaquar/Somany/equivalent make.Complete job |
| 222 | Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms. like Hindware/ Jaquar/Somany/equivalent make complete job |
| 223 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: approved brand like Hindware/ Jaquar/Somany/equivalent make.Complete job |
| 224 | Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms like Hindware/ Jaquar/Somany/equivalent make.Complete job |
| 225 | Providing and fixing 15 mm nominal bore C.P. angle valve of approved brand including all fittings and fixtures approved brand like Hindware/ Jaquar/Somany.Complete job |
| 226 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete 450x600mm like Hindware/ Jaquar/Somany/equivalent make.Complete job |
| 227 | Providing and fixing 100mm dia PVC pipes (Type-B) of approved quality including allied accessories like collars, door junctions, sockets, bends,reducers, cowls,collars,stay & clamps etc all complete |
| 228 | Providing and fixing 75mm dia PVC pipes (Type-B) of approved quality including allied accessories like collars, door junctions, sockets, bends,reducers,cowls,collars,stay & clamps etc all complete |
| 229 | Providing and fixing 40mm dia PVC pipes (Type-B) of approved quality including allied accessories like collars, door junctions, sockets, bends,reducers,cowls,collars,stay & clamps etc all complete |
| 230 | P/F master trap |
| 231 | Providing and fixing of glazed vitrified tiles 9-10mm thick with water absorption less than 0.08% and conforming to IS:15622 in different sizes in all colour and shade laid on 20mm thick cement mortar bed 1:4 mix grouting the joints with matching waterproof epoxy /cement based tile grout after removal of spacers,complete with all labours,scaffolding,wastage,cleaning of the finished surface .Complete job(Size 2'X2') |
| 232 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. |
| 233 | Supply, installation, testing and commissioning of water heater (Geyser) of AO Smith/Racold/Venus Jaquar/ Somany or equivalent make including cost of dash fasteners nuts and washers and necessary accessories.Complete job 50L |
| 234 | P/F Stainless Steel A ISI 304(18/8) kitchen sink as per IS 13983 with CI brackets and stainless steel plug 40mm , incl painting of fittings and brackets , cutting and making good the walls wherever reqd: Kitchen sink without drain board:470x420mm bowl depth 178mm |
| 235 | P/F 100mm sand cast iron grating for gully trap |
| 236 | P/F PVC waste pipe for sink or wash basin incl PVC waste fittings completeSemi rigid pipe 32mm dia |
| 237 | Providing and fixing 3 layer PPR pipes conforming to IS 15801,UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply incl all PPR plain and brass threaded Polypropylene random fittings.This includes testing of joints complete as per direction of EIC:Internal work -concealed fixing the pipe with clamps of 1.0m spacing incl cutting chases and making good the wall etc PN-16 pipe , 20mm OD(SDR-7.4) |
| 238 | PN-16 pipe , 25mm OD(SDR-7.4) |
| 239 | PN-16 pipe , 32mm OD(SDR-7.4) |
| 240 | PN-16 pipe , 40mm OD(SDR-7.4) |
| 241 | P/F PPR UnionPPR Union 25mm |
| 242 | P/F PPR UnionPPR Union 32mm |
| 243 | P/F PPR Union 40mm |
| 244 | P/F PPR Adapter 25mm |
| 245 | P/F PPR Adapter 40mm |
| 246 | Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. of approved brand like Hindware/ Jaquar/Somany/equivalent make.Complete job |
| 247 | P/F brass stop cock of approved quality(15mm nominal bore) |
| 248 | P/F gun metal gate valve with CI wheel of approved quality(screwed end)25 mm nominal bore |
| 249 | P/F ball valve (brass) of approved quality ,High or low pressure, with plastic floats complete15mm nominal bore |
| 250 | P/F gun metal non-return valve of approved quality (screwed end)25mm nominal bore |
| 251 | P/F CP brass shower rose with 15 or 20mm inlet,incl necessary accessories.Complete job : 100mm diameter |
| 252 | Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI: 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes icluding all necessary fittings.Complete job. |
| 253 | Dry random rubble masonry with hard stone in foundation and plinth: Without bond stone |
| 254 | Providing, fabricating, supplying and fixing factory-made modular kitchen cabinets(2 feet deep) comprising base units, wall units and tall units as per approved layout, manufactured from 18 mm thick BWP grade plywood conforming to relevant IS standards, finished on all exposed surfaces with 1.5 mm thick high-gloss acrylic sheets of approved shade, and inner surfaces finished with 0.8 mm white laminate. All edges shall be machine-finished with 2 mm PVC edge banding using hot-melt adhesive.The item shall include shutters, shelves, partitions, drawer units, cutlery trays, bottle pull-outs (where specified), soft-closing stainless steel hinges, telescopic drawer channels, SS handles or G-profile handles, magnetic catches, adjustable legs with PVC skirting, necessary screws, fittings, brackets, adhesives, sealants and all other accessories required for complete installation.The work shall include cutting, fitting around services, alignment, levelling, transportation, loading/unloading, labour, testing and commissioning, complete in all respects as directed by the Engineer-in-Charge. |
| 255 | Carriage of different materials by MT upto site of work:Sand for an average lead of 20km |
| 256 | 20mm nominal size stone aggregate for an average lead of 20km |
| 257 | Centering & shuttering incl strutting , propping etc & removal of form for:Lintel, beams, plinth beams, girders, bressumers and cantilevers |
| 258 | Lintel, beams, plinth beams, girders, bressumers and cantilevers |
| 259 | Suspended floors, roofs, landings, balconies, and access platforms |
| 260 | Electrification |
| 261 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable of Polycab (green) /Finolex /RR Kabels/Havels (life guard) /Salzer /Apar /Grandlays make in surface / recessed medium class PVC conduit (25 mm dia PVC Conduits including cutting of walls /floors with hydrauliccutters and refacing to original position by way of cement plastering/pop/paiting etc complete job seperate for each circuit incl cost of conduits),with p/f of 6Amps modularswitch, modular plate of ABB /L&T/Legrand /Simens make, suitable GI box and earthing the point with 1.5 s q.mm FRLS PVC insulated copper conductor single core cable etc. asrequired. (P+N+E for Normal and invertor points per room is to be provided seperately).The job futher includes providing and fixing of Lighting Conceal deeps box of heavy guage sheet steel dully powder coated paint of standard make ISI Marked |
| 262 | Wiring for lightl power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface I recessed medium class PVC conduit (25 mm dia PVC Conduitsincluding cutting of walls/floors with hydraulic cutters and refacing to original position by way of cement lastering/pop/ paiting etc complete job seperate for each circuit incl cost of conduits with allied accessories) including alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. of Polycab (green)/Finolex/RR Kabels /Havels (life guard) /Salzer /Apar /Grandlays make. with proper colour coding as per IS standards.The Job includes termination and p/f of copper thimbles of required Size and numbers on input and out put side dully crimped with rolling of colour coded tape complete job |
| 263 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in recessed medium class PVC conduit (Including cutting of walls and refacing of same) as required. of of Polycab (green) /Finolex /RR Kabels /Havels (life guard) /Salzer /Apar /Grandlays make |
| 264 | 2 X 1.5 sq. mm +1 X1.5 sq. mm earth wire |
| 265 | 2 X 2.5 sq. mm +1 X 2.5 sq. mm earth wire |
| 266 | 2 x 4 Sq.mm +1 x 4 Sq.mm |
| 267 | 2 x 6 Sq.mm +1 x 6 Sq.mm |
| 268 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing of 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. (Schneider /ABB /L&T /Legrand/Simens |
| 269 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing of 2 No's of 3 pin 5/6 A modular socket outlet and 2 No's of 5/6 A modular switch, connections etc. as required. ( of ABB/L&T/Legrand /Simens make) |
| 270 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.(ABB/L&T/Legrand / Anchor Roma make) |
| 271 | Supplying and fixing of 16 Amps Box type S-S Combine for invertor input and out put |
| 272 | Supply and fixing of 16 Amps 3-Pin Top of SSK /Eq.make |
| 273 | Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC)Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2nos. canopies, shackle kit, safety rope, copper winding, Power Factornot less than 0.9, Service Value (CM/M/\N) minimum 6.00,Air deliveryminimum 210 Cum/Min, 350 RPM (tolerance as per IS: 374-2019),THD less than 10%, remote or electronic regulator unit for speedcontrol and all remaining accessories including safety pin, nut bolts,washers, temperature rise=75 degree C (ma><.), insulation resistancemore than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. Usha/crompton/Halonix/Orient make |
| 274 | Supply, Installation testing and commissioning of 200mm-250 mm sweep Exhaust Fans of Usha/Crompton Greaves / Havel's /Orient /Helonix make incl making of necessary connections and making of necessary space in walls / Windows as per site.The Job includes providing and fixing of Hylum sheet of required Size for exhaust fan. The job furtherencompasses providing and fixing 3-way ceiling rose. |
| 275 | Supply,installation, Testing and Commissioning of 10-12 Watts,2 ft long LED tube light fitting having PVC Body (Commercial type) of standard make dully isi marked ,incl ceiling rose and 2-core transparent wire for connections complete job.Tinstallation). Approved make Helonix /Wipro /Philips /Crompton /LT /Endo /Regent make (to be approved before installation) |
| 276 | Supply and fixing of 12-15 Watts LED surface /recess (Commercial type) downlighter having following specficafications.The luminaire should have a colour temperature of 6500°K, CRI280 and SDCM≤5. The downlighter shall be back-lit & not side-lit. The driver shall have THD≤10% (@full Load) and PF ≥ 0.95 (@full load). The luminaire housing should made of pressure die-cast aluminium. The fixture should comply with the parameters as per IS10322. The luminaire shall have impact resistance of IK02 & ingress protection of IP20. Luminaire manufacturer must have In-house NABL accredited lab to conduct LM79, Type test as per IS10322, \\"FAT\\" before dispatch as per IS 10322 & IK Test. The luminary shall have average life of 50000 hrs operating temperature -10 C to + 45 C The successful bidder must submitthe NABL accreditation certificate for Luminaire manufacturer before supply of material. The LED Luminaire should be BIS registered. Successful bidder shall submit the following reports before supply ofof material for approvals: LM79 issued by NABL accredited lab, LM80 issued by LED manufacturer, Type Test Certificate for luminaire as issued by NABL accredited lab & BIS certificate for LED Luminaire & Driver. Approved make Helonix /Wipro / Philips /Crompton /LT /Endo /Regent make (to be approved before installation) |
| 277 | Supply, Installation, Testing and Commissioning of IP66, 45-50 Watt LED Flood lightLuminaries having Aluminium die cast of of standard make dully isi marked,to be fitted on walls/poles with necessary cliffs /Clamps with nuts and bolts complete job.The system efficacy of the luminaire shall be 2120lm/w. The LEDs used in the luminaire shall be from either Lumileds, Osram, Nichia, APT Electronics and CREE make, shall have CCT of 5700°К, CR270, SDCMS5, Life of 50000Hrs @ L70B50. The luminaire shall have IP rating of IP66 & IK rating of IK07. The luminaire shall have lens made of polycarbonate & optical cover made of toughened glass. The LED driver shall have operating voltage range of 140V to 270V, PF≥0.95 @ full load, THD≤ 10% @ full load, In-built surge protection of 4KV, HV Cut off @325V (±15V). The luminaire shall have 10KV SPD in-built inside the luminaire. The maximum dimensions of the luminaire shall be, L: 264M, Depth: 52MM & height without cradle: 203MM. The nominal weight of the luminaire shall be maximum 2.4KGs. The luminaire driver & it's SPD shall be of the same make/manufacturer as that of LED luminaires. Luminaire manufacturer must have In-house NABL accredited lab to conduct LM79, Type test as per IS10322, \\"FAT\\" before dispatch as per IS 10322 & IK Test. The successful bidder mustsubmit the NABL accreditation certificate for Luminaire manufacturer before supply of material for approval. The LED Luminaire & it's driver both should be BIS registered. Successful bidder shall submit the following reports before supply of material for approvals LM79 issued by NABL accredited lab, LM80 issued by LED manufacturer, Type Test Certificate for luminaire as issued by NABL accredited lab, BIS certificate for LED Luminaire& Driver.. Approved make Helonix /Wipro / Philips /Crompton /LT /Endo /Regent make (tobe approved before installation)Approved make Helonix /Wipro /Philips /Crompton /Bajaj make (to be approved beforeinstallation) |
| 278 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powderpainted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 279 | 6 way (4+ 18), Double door |
| 280 | Supplying and fixing of 63 Amps rating DP 240/415 volts (10KA) of Legrend /L&T /ABB /Simens /Schinder make dully isi marked complete with connections |
| 281 | Supplying and fixing of 32-40 Amps rating DP 240/415 volts (10KA) of Legrend /L&T /ABB /Simens/Schinder make dully isi marked complete with connections |
| 282 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required of legrand / ABB /Schneider /L&T 30 No 256 7680 /Simens make |
| 283 | Supply,Laying,Testing & Commissioning of 16 sq.mm 2- core -armored Al Cable XLPE/ PVC Insulated and of Havells/Grandlays /Apar /KEI make, including cost thimbles on input aswell as output sides dully crimped with hydraulic crimping tool incl making of necessary connections. The cable is to be laid partially under ground including execuation and refilling back after cable laying and partially above ground including clipps etc. |
| 284 | Supply and laying of DWC double layer Corrigated pipe having 40 mm Inner and outer dia respectively) of standard make dully isi marked with allied accessories like Collarsbends etc to be laid under ground including execuation of trench upto 50 CM and refilling back and disposal of surplus earth or surface mounted with p/f of steel saddles complete job complete job. |
| 285 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoall coke and salt as required including 8 No G.I wire from earthing electrode to controlling unit through PVC Conduit in One run. The job includes providing and fixing of main hole PVC Chamber with its cover complete job |
| 286 | Supply, Installation,Testing & Commissioning of 2 KVA Power Inverter (24 Volts) Sine wave type of make (Sukam / Luminous / Exide / Micro tec/Liv guard make ).The invertor shall have inbuilt display unit showing input and output voltage,Charging voltage, output current etc with having inbuilt protection device of suitable capacity. The invertor should invertor and UPS mode of operation. The job further includes Supply, Installation, Testing & Commissioning of 2 No's of 180 AH /12 V Tall tubular Inverter Batteries of same make as of inverter,the batteries are to be housed in angle iron Stand incl cost of trolley /Angle iron rack. complete job.The job includes AMC of batteries and invertor for a period of three yearswhich includes quarterly servicing of devices & as and when required. complete job. |
| 287 | Supply and errection of 8 mtrs hot dip galvanized octagonal poles Bajaj/Cromton/Philips /ABP /Utrakash make single section, made up of 4 mm thick plate suitable for climatic and seimic conditions as laid in relevent ISspecification ammended up to date.The dimensions of pole, are top -90 mm and bottom-155mm with 70 micron zinc coating, double arm made of GI pipe, twin Hot dip galvanisation. The pole should have base-plate made up of galvanized steel conforming to IS-2062 with the dimensions 260 X 260X 16mm...The pole should have door opening reinforced and weather protected with all accessories plate mounting strips 20x4 mm. The length of the door opening should be 500 mm and should be 1200 mm above the concrete level... The pole will have arrangement inside for fixing of the cable termination connector of philips /havels /Crompton / Bajaj make6-10 Amps SP MCB Of required amperage with detachable coversRequired length of PVC Copper wire multistrand 3 x 1.5 sq mm (separate circuit for each fixture installed in pole) 1 set of foundation bolts of required size and lengthRequired size of lugs duly crimped and cable termination gland wherever required 1 No. 4 pole,60 Amps heavy duty termination connector |
| 288 | Supply, Installation, testing & commissioning of high-quality integrated LED floodLight with a minimumsystem lumen of 21000 Im and system wattage of 150 W (±3W). The luminaire should have minimumsystem efficacy of 140 lumen/watt for the measured lumen output/system wattage. The LED used shallhave CCT of 5700K, SDCM ≤5 and CRI270. The housing should be made of LM6/ADC12 Alloy, noncorrosive Single Piece pressure die-cast aluminum, to withstand extreme environments. The spigot shallbe part of \\"Single Piece Pressure Die-cast housing\\" & shall not be bolted/welded/mechanically joined to the luminaire housing to ensure robust design. The luminaire shall have Integrated IP66 polycarbonatemfront cover/lens. The name of the brand should be embossed/engraved & should not be mentioned usingsticker/screen printing. The luminaire LED shall have declared Lifetime of 75K hours@L70. Product should be designed for continuous operation (10-12 Hrs. per day). The Ingress protection should be minimum IP66 & impact resistance shall be IK10. The minimum luminaire dimensions shall be L: 435mm including spigot, W: 200MM, H: 135MM (Including Control Gear Compartment) & the minimum nominal weight shall be 1.8KG. Control gear compartments shall be Top maintainable without accessing/openingthe optical compartment. The luminaire nair shall have minimum windage area of 0.062Sq.mt. The Luminaire should have a minimum 10 KV/5KA SPD duly bolted in the Luminaire. The SPD should be able to sustain a minimum 15 hits of 5KA rating i.e. Total of 45 hits across all the three modes as per IEEE 62.41.2. The luminaire should be of Class B Serviceability. The LED used in the luminaire shall be SMD type only & shall be from either Lumileds, Osram, Nichia, Signify, APT Electronics Co. Ltd., CREE make or equivalent. The Driver should be asphalt potted & should be a BIS approved driver. The driver shall bereplaceable. The driver shall have operating voltage of 120V to 270V, PF20.95 @full load, THD ≤10% @ full load, In-built surge protection of 4KV. The driver should be capable of withstand voltage stress of440V for 8 Hrs., should have an auto shutdown/cut-off at less than 90V & 325V(±15V) and have an auto recovery feature. The driver shall comply to IEC61547 & IEC 61000-3-2. The driver shall be EMI/EMCComplied as per EN55015/CISPR15. The luminaire shall be able to give Constant Light output (CLO) between voltage range of 140V to 277V. The luminaire driver & it's SPD shall be of the same make/manufacturer/Lighting company as that of LED luminaires. Luminaire manufacturer must have Inhouse NABL accredited lab to conduct LM79, Type test as per IS10322, \\"FAT\\" before dispatch as per IS+B30010322 & IK Test. The successful bidder must submit the NABL accreditation certificate for Luminairemanufacturer within 15 days of award of LOI. The LED Luminaire & it's driver both should be BIS registered. Successful bidder shall submit the following reports before of of Philips /Trilux /LightingTechonology/Wipro/Endo /Regent makeThe Job includes 2-years replacement warrenty for the entire lighting fixtures from the the date ofsucessful handing over of site to intending department, covering all damages /mulfunctioning /burnt outwhat so ever reasons |
| 289 | Supply, assembling, Installation, Testing and Commissioning of Pole Collarmounted Ring type bracket suitable for Holding of 6 Nos of flood lightsfabricated from 38 mm dia hot dip galvanized octagonal with all alliedaccessories like side supports etc complete job of same make as of poles |
| 290 | Providing and laying of Foundation Blocks in Cement Concrete of Ratio1:2:4 with 20 mm nominal size of aggerate of size (Partly under ground andpartly above ground) .including foundation bolts 3 numbers (to be laid asper approved drawings) |
| 291 | Supply, Laying, Testing and Commissioning of XLPE insulated PVC inner sheathed steel armoured Al Cable of Havells make incl making of necessary connections with proper size of Al Thimbles dully crimped with crimping tool in cable trench incl excavation upto 9 inches in trench and refilling back |
| 292 | 10 sq mm 2 Core |
| 293 | earthing of poles with Gl rod of 6 ft long to be embedded in a pit with extending of earthing from rod to pole by way of p/l of 25 mm flat iron strip from electrode to pole |
| 294 | Supply and laying of 38 mm dia HPPE flexible Pipe (air Cusion type) for laying of Cables in cable trench including digging of pit upto 50 cm deep for laying of pipes including refilling and disposal of surplus earth |
| 295 | Supply, installation, testing & commissioning (SITC) of 45W LED Postop made up of aluminium pressure die-cast aluminum with polycarbonate cover in addition to a specific weathering resistance treatment, Bigger Dia of 338 mm helps for uniform light distribution & Polycarbonate cover for glare-free light distribution, PDC spigot helps in sturdiness of product, Smooth finish Top cover, Robust Mounting base & Direct the light where it is needed to avoid sky pollution. High Efficiency long life LED module with SMD LED package mounted on MCPCB. Lumen Efficacy of LED >100Lm/W and CRI >70. Powered by Built In electronic. LED driver with THD<10%, 4kV inbuilt surge protection, high cut off at 325V, LV cut-off & HVProtection@440V for 8 hrs. System Lumen >4500 Lm, IP 66 or above, IK 08, PF>0.95, Operating voltage range: 140 V -270V, Average life L70B50: 50,000 hours. Luminaire manufacture shall provide LM79 report from NABL/UL accredited lab & LM80 report issued by LED manufacturer. Both the fixture and Driver should be of same make & must have separate BIS approva Make. Signify Cat. Ref. No. BGP200 LED45 CW or equivalent in Endo /LT/Regent suitable for outdoor mounting on existing stone pillars (~1.0 m height); complete with all accessories, connection wiring, junction box, earthing, hardware, and as directed by Engineer-in-Charge. The Agency / firm must submit the Techanical data sheet (TDS) on OEM letter head along with requisite certificates for approval by an officer from the department not below the rank of SDO ,prior to the supply of materials. The Job includes 3- years replacement OEM warrenty for the entire lighting fixtures from the the date of sucessful / handing over of site to intending department, covering any damage /mulfunctioning /burnt out (replacement warrenty certificate from OEM for 3 years covering all damages be submitted before any bill for payments are processed) |
| 296 | Supply, Laying, Testing and Commissioning of XLPE insulated PVC inner sheathed unarmoured of Havells /grandlays /Polycab make incl making of necessary connections withproper size of Al Thimbles dully crimped with crimping tool |
| 297 | 10 sq mm 2- Core |
| 298 | Supply, installation, testing & commissioning (SITC) of Decorative LED Gate Light Luminaire,suitable for outdoor mounting on entrance gates / boundary pillars, made of UV-stabilizedpolycarbonate housing & diffuser with anti-dust coating to prevent dirt accumulation andensure long-term clarity. The fixture shall have high-impact resistance, weather-proof design,and IP66 protection.Technical Specifications:Type: Decorative LED Gate Light (post-top type)Power Rating: 45-50 W LED Lamp (as per design requirement, including its cost)Ingress Protection: IP66 (dust & water jet proof)Impact Resistance: IK08 (minimum)Housing Material: Polycarbonate, UV-stabilized, anti-dust coatedDiffuser: Opal / Clear polycarbonate, anti-dust treated for easy cleaning and uniform lightdistribution2 No 2800 5600 Finish: Black / White / Decorative finish (as approved by Engineer-in-Charge)LED Light Source: High-power LEDs with system efficacy ≥ 110 Im/WCCT (Colour Temperature): 3000K/4000K (warm or neutral white)CRI: ≥ 70Power Factor: ≥ 0.95THD: ≤ 10%Surge Protection: In-built SPD ≥ 4 kV, external SPD up to 10 kVOperating Voltage: 140-270 V AC, 50 HzL70 Life: ≥ 50,000 burning hours at 25°C ambient temperatureMounting: Suitable for fixing on MS/GI pipe bracket / stone or concrete pillar top (OD 60 mmapprox.)Warranty: Minimum 3 years for housing and 5 years for electronic driver + LED moduleRecommended Makes:Philips, Wipro, Crompton, Bajaj, Havells, or equivalent as approved by department not belowthe rank of SDO |
| 299 | Supply, Laying, Testing, termination and Commissioning of 3 core -2.5 Sq.mm copper conductor pvc insulated armoured cable (3C-2.5 Sq.mm) of havells /Grandlays / Polycab make to be laid from feeder pillars to luminaries, including cable glads, lugs,saddles, fixing of copper thimbles on input and output side,clamps complete job, |
| 300 | Supplying and fixing of 25 mm sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 301 | Design,Supply, Installation, Testing and Commissioning of CPRI Approved Main LT Control Double Door panel Slopped Roof fabricated of 16 gauge sheet steel,the panel should have standing dust & vermin proof with gasket lockable door of 16 gauge sheet steel. The Panel should be painted with Electro static powder coated colour, Siemens grey structural with proper chemical pre-treatment with film thickness 35-40 Microns,duly fitted with Voltmeter, R/Y/B Phase-indicators etc & angle iron stand of 2.5 feet height/ground clearance properly grouted in cement concrete of 1:2:4 ratio-filter with baby nsulators/glands/thimbles suitablefor use at 415 Volts 3 Phase,4 wire 50Hz system complete in all respects complete in all respects with following:-Incoming: 125 Amp-DP 10KA MCB L&T/ABB/Legrand/Simens Make.Outgoing: 1) 200 Amp Suitable Al. Bus bar &2)Auto Manual Selector Switch - 1 No.3)GIC Timer switch with 16-32 Amp Contactor for Auto operation of illumination lightingsfrom dusk to dawn.(4) 32-40 Amps DP MСB (10KA) = 4 NosThe Panel manufacturing unit should be CPRI Registered with latest ammended IEC / IS61439 and the Contractor has to submit the test certificate of main switch gear's and Drawing's of panel (Showing claerly dimensions of panel with spacing of switchgear as per IEStandards) & is to approved by Department not less than the rank of SDO before manufacturing of panel. |
| 302 | earthing with Gl rod of 6 ft long perforated type to be embedded in a pit with extending of earthing from rod to pole by way of p/l of 8 No SWG insulated bare GI Wire strip from electrode to deice |
| 303 | Supply and laying of 38 mm dia HPPE flexible Pipe (air Cusion type heavy duty) for laying of Cables in cable trench Including execevation upt 50 Cm deep trench refilling and disposal Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 10, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 28, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 13 daysSep 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender