Tender For E-Tender For The Partition Work At Thiruvananthapuram
Tender Value
23.45 Lakhs
Estimated cost
Bid Submission
17 Sep 2026
1 days left
EMD
23452
Bank guarantee accepted
Document Fee
5534
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thiruvananthapuram → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for E-Tender For The Partition Work At Thiruvananthapuram
BOQ
| Sl. No. | Item Description |
| 1 | e-tender for Partition Work at ThiruvananthapuramFor more details refer tender documents |
| 2 | Aluminium Partition Cabin Work CPSP J1,J2 CPSP 1 to 8 Central Partition Only Supply and Installation of Aluminium Partition: consisting of Aluminium Sections 63.5 MM X 38.1 MM X 1.0 MM thick hollow anodized of Jindal / Hind Alco make conforming to IS733 and IS 1285. The anodizing shall be transparent and complying IS 1868 (minimum anodic coating of grade AC 15). The Sections would be installed at an interval of 3’6” vertically and bottom section of Aluminium snap beading for glazing/paneling etc. and 5 mm thick float Transparent Glass including providing screw less aluminium glazing clip. Bottom up to 3’ Ht Will be provided with 8 MM thick both side pre-laminated particle board flat pressed 3 layer conforming to IS12823 Grade I type II of of interior grade complete with fixing clips, fasteners, filling up of gaps at junction, top, bottom, & sides with required PVC/Neoprene felt etc.. The joints shall be smooth, mitred and jointed with cleat angle etc…. |
| 3 | Executive Office Table For Officer IOP 1 to 5Supply and installation of free standing straight table of size 1500Lx 700W x 760H (or nearest size)Main Table The Table Top shall be made of 18 mm thick side leg 18mm pre - laminated particle board with PVC edge band lipping. CPU trolley and Keyboard tray. The rate shall be inclusive of cost and conveyance of all material, labour, transportation, loading - unloading charges and Movable type Table With Side Table size 1500Lx 700W x 760H |
| 4 | High Back Chair IOP 1 to 5Executive high back Revolving chairs with Imported fiber handle, extra cushion Back Tilting Mechanism High Pressure Hydraulic gas lift 100 mm with Cover Powder Coated Metal (OR) Nylon/SS Base with imported Nylon Wheel 3 Year One Site Warranty |
| 5 | Office Chair For StaffSupplying Medium back chair. The seat and the backrest shall be made up of molded polyurethane foam of the right density and thickness, facilities like Pneumatic height adjustment, center tilt mechanism, tilt locking, base with twin castor wheels |
| 6 | Slotted Angle Rack New Office Storage RoomManufacture the heavy duty slotted angle racks, angle racks and slotted angle racks in a variety of cages 2mm and dimensions. They are made through advanced technical processes and are made using CR, mild and HR steel. 20 kg sheet With Support under Two Panel They are Good durable with Spry Painting Finish work Size:900mmx400mmx1900mm(H) |
| 7 | Truss structure Work Full CoveredSupplying and erecting Platform for using 16 gauge GI pipe of the following size frame built on 65 mm Die 2.5 mm Thickness GI hollow Section Main Platform Section 76.2X38.2 X1.6nmm GI Rectangular Hollow Section Cross Purling 50X50X1.6 mm GI Hollow Section Structural Frame 101.6X101.6 Fully Applied Epoxy Coating Finishing and including welding, cutting to length, cost and conveyance of all materials and labour charges GI pipe (Truss) GI pipe (Purling). bolted in built up Sections Trusses and framed work with M.S angle iron plates, Roof Sheet Sandwich Model 0.35 mm Thickness Powder Coated Finish all Materials Branded Like JSW or Other Equitant Brand , cutting, fabricating and hoisting with bolts, plates, washers, bitumen washer etc…. |
| 8 | Free Standing Straight Table for Staff Supply and installation of free standing straight table of size 1000Lx 600W x 750H (or nearest size)Main Table The Table Top shall be made of 18 mm thick side leg 18mm pre - laminated particle board with PVC edge band lipping. CPU tray and keyboard tray shall be provided. The rate shall be inclusive of cost and conveyance of all material labour , transportation ,loading -unloading charges etc. table 1000x600x750 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 daySep 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender