Tender For Design , Drawing , Construction , Commisioning & Testing Of Reinforced Cement Concrete 250Kl Ugr For Dermitory Building At Sea Food Park Deras.
Tender Value
22.96 Lakhs
Estimated cost
Bid Submission
21 Sep 2026
2 days left
EMD
22961
Bank guarantee accepted
Document Fee
7080
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Khordha → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Design , Drawing , Construction , Commisioning & Testing Of Reinforced Cement Concrete 250Kl Ugr For Dermitory Building At Sea Food Park Deras.
BOQ
| Sl. No. | Item Description |
| 1 | Design, Construction,testing & commisioning of following capacity RCC clear water under ground storage reservoir with provision for filling,delivery,over flow & wash out arrangement with puddle flange etc all complete as per specification and direction of EIC. (On turnkey Basis) |
| 2 | 250KL |
| 3 | Supply, installation, testing & commissioning of Submersible Pump set.The capacity of each pump, Total Head- 15.00mtr, 5HP with 3-phase 50Hz, TEFC induction motor coupled with a common base with electrical control panel suitable for the pump set, including construction of concrete foundation, suction & delivery piping arrangements with necessary fittings and necessary valves, for Drinking and Flushing Filling OHT etc. all complete as per the specification & direction of EIC. |
| 4 | SITC of L.T. indoor floor /wall mounted type distribution boards made out of 2mm thick CR sheet metal cubicle fixed on m.s. channel base, duly acid treated for derusting, primered and painted with 2 coats of enamel paint of approved shade, dust, damp & vermin proof, having hinged door and compartmental arrangement for each equipment, cable alley chamber in each outgoings & busbar chamber on the top of the panel running horizontally, having provision for cable/ conduit entry, earthing studs as per specification mentioned below duly factory wired conforming to the relevant ISS and as per special conditions of contract making good the damages caused complete as per the direction of Engineer-in-charge. |
| 5 | Incomer:1 no. 63-Amp, 3P MCCB, 36 KA T/M |
| 6 | 1 no. 63A 4P onload change over switch |
| 7 | Bus bar: 4 nos. 100A Aluminium Busbar duly sleeved |
| 8 | Outgoing: |
| 9 | 3 Nos 32A 3P MCCB 50 KA motor back-up protection |
| 10 | 3 Nos MNX18 3P power contactor for STAR |
| 11 | 6 Nos MNX50 3P power contactor for DELTA & MAIN |
| 12 | 3 Nos Aux. Add on Block 1NO+1NC |
| 13 | 3 nosThermal overload Relay 4.5-7.5A |
| 14 | 3 nos Star-Delta Timer 230V AC |
| 15 | 1 nos MCB:32A FP MCB 'C' 10kA |
| 16 | 2 nos MCB:32A DP MCB 'C' 10kA |
| 17 | Instruments: 2 set.LED type phase indicating lamps with control MCB |
| 18 | 1 no.100/5A CT operated Digital ammeter |
| 19 | 1nos MFM, cl-1 |
| 20 | Complete duly factory wired as per SLD and panel should have proper earth by suitable rated Al flat. |
| 21 | Supplying, laying & testing of following size of PVC insulated XLPE shethed / strip armoured aluminium / Copper conductor power cables of 1100 volt grade laid existing HDPE Pipe, cable tray etc complete with making good to the damages as required and as per direction of Engineer-in-charge. |
| 22 | 4 core x 25 sq mm Aluminium armoured Cable with end termination. ( for incomming cable) |
| 23 | 3 core x 4 sq mm Copper flat Cable with end termination. ( MDB to Submersible pumps) |
| 24 | Supply & laying of 40 mm, PN-6, PE-80 HDPE pipe along with all accessories like socket, bend,coupler, etc. with fitting, cutting, jointing etc. direct in ground (below 750mm of ground level) including excavation & backfilling of trench, as directed by E.I.C |
| 25 | SITC of pipe earth electrode made out of 40mm dia class B G.I. pipe of 4.5 metre long with arrangements for fitting/ termination of G.I. flat / wire with G. I. nut bolts & washers including cost of burnt wood charcoal, salt, foreign soil, water pouring arrangements, brick masonary (with CI/MS cover plate) enclosure on top with removable RCC cover complete with labour for excavation of pit in all kinds of soil & rock as required and as per direction of Engineer-in-charge. |
| 26 | Supplying and laying 6 SWG G.I wire at 0.50 metre below ground as conductor earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. |
| 27 | Supply & fixing of GI tape of size 25mm X 6mm flat in horizontal/Vertical run direction |
| 28 | Supply and fixing of LT Rubber mat of size 1000x1000x2.5mm in font of Distribution Boards at different labs as required complete as per direction of Engineer-in-charge. |
| 29 | Supply and installation of Shock treatment chart ( both English, Hindi and Odia language) in different labs as required complete as per direction of Engineer-in-charge.as required and as per the direction of E.I.C |
| 30 | SITC of carbon Dioxide (CO2) gas type fire extingulsher of 4.5 kg capacity with initial charge i/c discharge hose and hom,squeeze grip release valve,locking arrangement bracket with two screw and sleeve i/c fixing on wall as required.(Fire extinguisher shall be ISI marked conforming to IS:15683) |
| 31 | Providing all materials, labour T&P for laying of following dia MS pipes with required size of fittings, like off set, bend, tapper etc. as per site condition for water works purpose.(The pipes shall be painted with two or more coats of approved anticorrosive Epoxy paint of approved shade ) and aligning the pipes below/ above the ground level as per site condition as per specification and direction of EIC. |
| 32 | 100mm Dia MS PIPE |
| 33 | Providing, fitting & fixing of following size valves as per IS specifications including fixing the same with supply of required jointing materials like rubber insertion, MS nuts & bolts, paint etc. and testing the joints with required water pressure & all complete as per specification & direction of E.I.C. (Make :-Kirloskar / Vag/ Audco) |
| 34 | 100mm dia D.I Sluice valve (Non rising spindle) of PN-1.6 as per IS-14846/2000 with ISI mark. |
| 35 | 100mm dia D.I Non Return Valve (Non rising spindle) of PN-1.6 as per IS-14846/2000 with ISI mark. |
| 36 | MS flange suitable for 100mm dia (NB) MS pipe as per IS 6392/1971. |
| 37 | 100mm dia x90* MS Bend |
| 38 | Providing all materials, labour T&P for gas cutting of 8mm thick MS Pipe by oxygen and acetylene gas flame, fitting and setting as per required size to IS specification and electrodes confirming to IS specification after \\"V\\" grove cutting including cost of hire and running charges of generator set etc |
| 39 | Providing all materials, labour T&P for Welding with two welding beads/pass, conforming to IS:816-1998 (Single 60° Butt weld) to MS pipes and fittings at site or Welding with two welding beads/pass, conforming to IS:816-1998 (Fillet weld) to MS pipes and fittings at site including cost of hire and running charges of welding generator set etc |
| 40 | GST will be paid Extra as per Applicable Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysSep 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender