Tender For Providing And Laying Of Sewer Network For Ahmed Nagar, Pandach, Illahi Bagh, 90 Feet Road (Right Side), Rangpora Zakura And Gulab Bagh (Adv. Cost Of Rs. 1659.75 Lacs)
Tender Value
16.59 Crore
Estimated cost
Bid Submission
05 Oct 2026
22 days left
EMD
33.19 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing And Laying Of Sewer Network For Ahmed Nagar, Pandach, Illahi Bagh, 90 Feet Road (Right Side), Rangpora Zakura And Gulab Bagh (Adv. Cost Of Rs. 1659.75 Lacs)
BOQ
| Sl. No. | Item Description |
| 1 | (Part-A) Civil Network: Dismantling manually/ mechanically including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: (Bituminous road). |
| 2 | Dismantling of flexible pavement (bituminous courses) by mechanical means and disposal of dismantled material upto a lead of 1 kilometer, as per direction of Engineer-in-charge. |
| 3 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts,wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth anddisposal of surplus excavated earth as directed, within a lead of 50 metres (All kinds of soil). |
| 4 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth asdirected: (All kinds of soil). |
| 5 | Close timbering in trenches including strutting, shoring and packing cavities (wherever required) complete. (Measurements to be taken of the face area timbered) (Depth exceeding 1.5m but not exceeding 3m). |
| 6 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5m. |
| 7 | Supply and Laying of dry sotne soling in horizontal on level. |
| 8 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: |
| 9 | 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 10 | 1:2:4 (1 cement : 2 Coarse sand : 4 graded stone agg. 20mm nominal size) (crushed) |
| 11 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level. |
| 12 | (1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 13 | 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 14 | Reinforced cement concrete work in well-steining including curing but excluding the cost of centering, shuttering, finishing and reinforcement, with(1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 15 | Reinforcement for RCC work incl. Straightening cutting, bending, placing in position and binding all complete (Thermo Mechanically Treated Bars). |
| 16 | Supplying and filling in plinth with fine sand under floors including, watering, ramming, consolidating and dressing complete. |
| 17 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in : Cement mortar 1:4 ( 1cement : 4 coarse sand) complete job. |
| 18 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level. |
| 19 | Providing & Laying to level & slope, with proper grade pipes of Class NP3/NP4 of following internal dia & grouting the pipe joints with cement slurry 1: 2 mix (1 cement: 2 fine sand) and also sealing the pipe joints with fixing of Rubber Gaskets incl. Cost of cement, sand, Rubber gaskets and RCC pipes incl. Testing of joints & all carriages of pipes upto site of work (Complete job). |
| 20 | 250mm dia (NP3) |
| 21 | 300mm dia (NP3) |
| 22 | 450mm dia (NP4) |
| 23 | 600mm dia (NP4) |
| 24 | Centering and shuttering incl. Strutting, propping etc and removal of form work for:- |
| 25 | Foundation, footings, basis of columns etc, mass concrete. |
| 26 | Walls (any thickness) incl. Attached pilasters buttresses, plinth and string courses. |
| 27 | Suspended floors, roofs, landings, balconies and access platform. |
| 28 | Edges of slab and breaks in floors in walls (above 20Cm wide). |
| 29 | Edges of slab and breaks in floors in walls (under 20Cm wide). |
| 30 | Well steining |
| 31 | Extra for shuttering in circular work (20% of respective centering and Shuttering items) |
| 32 | Stairs (excluding landings) except spiral stair cases. |
| 33 | Providing & Fixing of Polycrate Manholes covers & frame including all safe carriages upto site of work (Complete Job). |
| 34 | Providing, Laying and Spreading of granular Sub Base in trenches in uniform layers including dressing, watering, ramming etc and carriage by tippers to site of work with all leads and lifts (Complete Job). |
| 35 | Providing and Fixing of C.I Covers including frame & all safe carriages from source to site of work as per directions of Engineer-In-Charge (Complete Job). |
| 36 | Providing and Laying in Position of S&S centrifugually 250mm dia K-9 (Spun iron) or D.I Pipe including push on joints with all fixtures bends tees supports and back filling etc as per directions of Engineer-In-Charge (Complete Job). |
| 37 | Well sinking to level including supply/engagement of all types of well sinkers including Headman; Assistant Well sinker, Labour (Skilled / unskilled) supply of sand,E.C. Bags, filling of sand into E.C. Bags, including stitching loading/unloading of sand filled Bags after every casting on plate form, providing of plate form of required strength including its fixing/Removal after every casting disposal of loading material and including cost of scaffolding charges, carriage of all materials what so ever involves. The job includes providing and fixing of 0.63mm×300mm G.I. Sheet after every casting/joints to prevent leakage including adjustment to steel edge in level on ground after preparation of ground by w ay of levelling etc (Complete Job). |
| 38 | Providing orange colour safety foot rest of minimum 6mm thick plasticencapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS :1786 having minimum cross section as 23 mmx25 mm and over all minimum length 263mm and width as 165mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture’s permanent identification mark to be visible even after fixing. including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design. |
| 39 | Provision for repair and restoration of under ground utilities like water supply pipes (G.I, HDPE, Cast Iron,MS Pipe etc) Telephone Cables and optic fibre etc, inlcuding all accessories required to rectify the damage caused to its original position in all respects including all carriages all told to be paid as per actual. |
| 40 | Providing wood work in frames of doors, windows, clerestory windows andother frames, wrought framed and fixed in position with hold fast lugs or withdash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):(First class teak wood). |
| 41 | Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size withnecessary screws, excluding panelling which will be paid for separately, allcomplete as per direction of Engineer-in-charge. (Note: -Butt hinges andnecessary screws shall be paid separately) Second class teak wood 35mm. |
| 42 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.Second Class teak wood |
| 43 | Providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete.With Galvanized M.S. Wire gauge with wire of dia 0.63 mm, With 2nd class teak wood beading 62x19 mm |
| 44 | Structural steel work in built up sections, trusses and framed work,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.(Welded). |
| 45 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required (0.63 mm thick with zinc coating not less than 275 gram/m2). |
| 46 | 12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand). |
| 47 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steelprimer using structural steel etc. as required.(In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works) |
| 48 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. (50 mm thick with 20mm nominal size stone aggregate). |
| 49 | Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 50 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) |
| 51 | Finishing with Deluxe multi surface paint system for interiors andexteriors using primer as per manufacturers’ specifications:Two or more coats applied @ 1.25 liter/10sqm over andincluding one coat of special primer applied @ 0.75liter /10sqm. |
| 52 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand)including grouting the joints with white cement and matching pigmentsetc. complete (Size of tile 600x600 mm). |
| 53 | Providing and Fixing of Sanitary items of approved quality (ISI Marked) including all fittings as per directions of Engineer-In-Charge (Complete Job). |
| 54 | W.C Indian type with cistern bend (ISI Marked) Complete. |
| 55 | Geyser 50 Litres capacity of approved brand i.e Recold, Havells, (ISI Marked) Complete Job. |
| 56 | Wash basin with pedestal (ISI Marked) |
| 57 | Wall Mixer |
| 58 | Bib Cock |
| 59 | Basin Mixer |
| 60 | PVC Connection |
| 61 | Waste Pipe |
| 62 | 4\\" PVC Pipe (ISI Marked) |
| 63 | 3\\" PVC Pipe (ISI Marked) |
| 64 | 20mm dia PPR Pipe including fittings |
| 65 | 20mm dia PPR Union |
| 66 | 1000 Litres PVC Water Tank (ISI Marked) |
| 67 | 20mm dia Tank Nipple |
| 68 | 25mm dia PPR Pipe including fittings |
| 69 | 25mm dia Tank Nipple |
| 70 | Ball Valve Brass (ISI Marked) |
| 71 | Providing and Fixing of 400mm dia D.I Sluice Valve (with Cap) complete with Nuts, Bolts, Rubber insertions, Tail Pieces etc of approved make (ISI branded) including all as per directions of Engineer-In-Charge (Complete Job). |
| 72 | Providing and fixing of accessories including dash fasteners, screws, handles, door stoppers, hangers etc on all doors and windows including all carriages wherever required as per the directions of Engineer-In-Charge (Complete Job). |
| 73 | One lighting point shall include wiring for lighting points in 1.5 sq mm PVC insulated copper wire and 2.5 sq mm PVC multi-stranded copper wire for lighting sub-mains, 6 Amp one-way switch, 2mm thick PVC conduit / channel with bends, junction boxes etc, 6 Amp S-pole MCB, 10 DP MCB, 2 way DB for housing MCB and Hylen sheet with wooden box recessed in walls with all accessories as per directions of Engineer-In-Charge (Complete Job). |
| 74 | One heating point shall include wiring for lighting points in 2.5 sq mm PVC insulated copper wire and 4.0 sq mm PVC multi-stranded copper wire for lighting sub-mains, 16 Amp one-way switch, 2mm thick PVC conduit / channel with bends, junction boxes etc, 10 Amp S-pole MCB, 10 DP MCB, 2 way DB for housing MCB and Hylen sheet with wooden box recessed in walls with all accessories as per directions of Engineer-In-Charge (Complete Job). |
| 75 | One lighting point shall include wiring for lighting points in 2.5 sq mm PVC insulated copper wire and 12mm ceiling fan, 225mm exhaust fan with cieling roses and PVC square block, 350 volts electronic fan dimmer, 2mm thick PVC conduit / cjhannel with bens, junction boxes, 6 Amp S-Pole MCB, 10 Amp DP MCB, 2 way DB for housing MCB for lighting circuits and Hylen sheet with wooden box recessed in walls with all accessories as per directions of Engineer-In-Charge (Complete Job). |
| 76 | Providing & laying House connections with the following PVC accessories of ISI make (Prince-B Type) incl. all carriages (Complete Job). |
| 77 | PVC Pipe 100mm dia |
| 78 | PVC Pipe 150mm dia |
| 79 | Carriage of Materials by Mechanical Transport from Source to site of work: - |
| 80 | Stone soling from Athwajan Avg. 12kms |
| 81 | Stone Agg. 40mm & above from Athwajan Avg. 12kms. |
| 82 | Stone Agg. Below 40mm from Athwajan Avg. 12kms. |
| 83 | Sand from Ganderbal Avg. 20kms |
| 84 | Cement and Steel from Source Avg. 6kms |
| 85 | Bricks from Pampore Avg. 20 Kms. |
| 86 | (Part-B) Electro-Mechanical Equipments: Supply, installation, testing and commissioning of submersible type pump sets with motors, SS guide Rails, submersible cable ( Power cable, control cable, instrumentation cable each 30 meter length) ,ultrasonic level transmitter(0-10 Mtr),soft starter panel, duck foot pedestal etc Type of pump: Non clog centrifugal volute type sewage submersible Pumps,Type of pump: Non clog centrifugal volute type sewage submersible Pumps Capacity= 500 M3/Hr Head = 25 meters or above Motor rating = 80-90 H.P 1450 rpm. |
| 87 | Providing fitting and testing of MS pipe 250 mm dia 6.4 mm thickness. The job includes P/F of MS bends, fab for the delivery manifold upto rising main including easy bends, flanges, rubber gaskets nut and bolts etcfor successful execution of work at site. |
| 88 | Providing fitting and testing of 250 mm dia sluice valves |
| 89 | Providing fitting and testing of 250 mm dia Non return valves |
| 90 | Providing fitting and testing of MCCB 400 Amp |
| 91 | Providing fitting and testing of copper wound servo stabilizer 125 KVA for input voltage of 156 Phase to phase and output voltage 415 volts phase to phase. |
| 92 | Providing fitting and testing of 125 KVA D.G. set confirming to CPCB IV guide lines along 185 Sq mm 3.5 core Al cabling from D.G set to main MCC panel, earthing as per OEM recommendations. The job includes P/L of RCC foundation block as per OEM recommendations along with CGI roofing |
| 93 | Providing fitting and testing of 160 KVA HT/LT substations including ST poles, ABC conductor, trivectometer, and all other allied accessories required for successful commissioning. The job also P/L of single core aluminum conductor 240 Sq mm from LT/HT substation to main control panel The necessary clearance for installation/commissioning is in contractor’s scope of work along with earthing of substation as per IEE rules. |
| 94 | Providing fitting and testing of 50 MM2 4 core submersible type copper conductor for internal connections from panel to starters |
| 95 | Providing fitting and testing of G.I cable tray 100 mm with structural supports |
| 96 | Providing, fabrication erection of MS working plate form over the main pumping sump. The MS frame is to be fabricated out of ISMB, ISMC and angle iron. The frame is to be covered by MS chequered plate 6mm thick and the openings at the requisite places are to be fabricated with hinge mechanism for the lifting and lowering of the pumping units during maintenance .Fabrication and erection of MS ladder 6 mtr long to be erected inside the sump.The details of ISMB, ISMC, Angle iron and chequered plates are as under.i. ISMB 150=10 RM.@ 15Kg/RM=150 kgii. ISMC 100=10 RM @ 9.56Kg/RM=95.6 kgiii. ISA 65=30 RM @5.80Kg/RM=174 kgiv. Chequered Plate 6 mm=20 [email protected]/SM= 942kg |
| 97 | Supply, installation, fitting, testing and commissioning of under running, outdoor type monorail electric hoist of 3 TON capacity and lift of 8 M capable of travelling across (Right & left) and lifting and lowering (Up & Down) movement. The technical speciation of the EOT is as under Duty Or Class of hoist: Electric hoist, under running, outdoor type with continuous operation.Capacity=3 ton Lift of Hoist=8MSpecification IS3177 ( 1999):IS800( 1976)Motor : Electric hoist, under running, outdoor type with continuous operationHoist Speed: - 4 m/min (Max.)Control/operation of electrical hoist Pendent station control to be operated from MFL (approx. 12 Feet vertical height) complete with control panelWire Rope manufacturing and testing :-As per ASTM A 1023M-02 and ASTM A586Number of Falls : 4 or higherWire rope diameter: As per IS codeTensile strength: 1770 N/mm² ( minimum)Rope Drum: un-flanged Material :seamless pipeDrum dia : As per IS code Drum Length : As per requirementType of bearing:-SA spherical roller/ball bearingHooks: Type Plane ‘C’ ShankSwiveling: Yes On Thrust BearingSafety latches: To be ProvidedDesigned: According to DIN-15400Type of Brakes: Electro hydraulic thrust or electromagnetic disc type Limit Switch: Rotary The hoist system shall be complete in every respect and shall be tested on load at site.Note:-The equipment shall be provided with company test certificate |
| 98 | Illumination of the pump house. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 22 daysOct 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender