Tender For Repair/Renovation Of Residential Quarter Of Chief Execative Officer Pda At Pahalgam Advt.Cost=₹ 7.93 Lacs, Amount Without Gst= ₹6.73 Lacs, Gst Amount= ₹1.21 Lacs
Tender Value
7.93 Lakhs
Estimated cost
Bid Submission
16 Sep 2026
0 days left
EMD
15860
Bank guarantee accepted
Document Fee
300
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Anantnag → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Renovation Of Residential Quarter Of Chief Execative Officer Pda At Pahalgam Advt.Cost=₹ 7.93 Lacs, Amount Without Gst= ₹6.73 Lacs, Gst Amount= ₹1.21 Lacs
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by manual means in trenches for foundation over areas (not exceeding 1.5 m in width ) including disposal of excavated earth lead upto 25 meters and lift upto 1.5 m, as directed by Engineer-in-Charge in all kinds of soils |
| 2 | Providing and laying of hand packed stone boulder (size 150mm-230mm) before laying of PCC compacted consolidated rammed filling the voids compacting all complete carriage upto site of work all head loads complete job. |
| 3 | Providing and laying in position cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: |
| 4 | Providing and laying in position cement concrete of specified grade including curing butexcluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 5 | Centering and shuttering including strutting, propping etc. and removal of form for:Foundations, footings, bases of columns etc. for mass concrete. |
| 6 | Painting with synthetic enamel paint of approved brand and manufactureto give an even shade Two or more coats on new/ old wood work |
| 7 | Providing and fixing 12mm thick imported wooden panelling in linings of soffits including underneath frame work of of wooden jambs of size 50x25 mm and 12mm ply wood, including wooden cornice of required size. The job shall also include finishing with tw or more coats of touchwood paint etc complete job up to the satisfaction of EIC. The job shall also include scaffolding etc |
| 8 | Providing and fixing of KHATAM BANDI ceiling of first class budloo/fir wood excluding the cost of frame work which is to be paid separately (Framwork already existing). Chaar Gul |
| 9 | French spirit polishing, Two or more coats including a coat of wood filler |
| 10 | Providing Tile profile Colour coated G. I. sheet roofing including vertical/curved surfacfixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled withwhite lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch inhorizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 11 | Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 12 | Provdng and fixing of ornamental corices(50X50mm) including allattachments complete jobFirst Class Kail Wood) |
| 13 | Providing and fixing plained eaves boarding. 2nd class Deodar wood 250x32 mm (nominal size) |
| 14 | Engagement of Carpenter for removing, refixing existing doors and windows incl adjustment of Hardware items to doors and windows incl |
| 15 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). 30mm Second kail wood |
| 16 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick 5.0 mm thick glass pane (weighing not less than 12.50 kg/sqm) |
| 17 | Providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete With Galvanized M.S. Wire gauge with wire of dia 0.63 mm including with 2nd class teak wood beading 62x19mm |
| 18 | Providing and fixing glass panes with putty and glazing clips in windows, clerestory windows, all complete with 5.0mm thick glass panes. Design of glass to be approved by EIC |
| 19 | Providing and fixing of ornamental type vertical posts (fully wood carving) of first class deoder wood of approved pattern and design including providing and applying two or more coats o melamine polishingetc.complete in all respects.(size 8\\" dia. & 10'.6\\" long) |
| 20 | Providing and fixing bright finished brass handles with screws etc. complete : 125 mm |
| 21 | Providing and fixing bright finished brass handles with screws etc. complete : 100 mm |
| 22 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete. :100x10 mm |
| 23 | Providing and fixing bright finished brass night latch of approved quality including necessary screws etc. complete. |
| 24 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length KD wood |
| 25 | Construction of wardrobes using BWR 19mm thick ply board (ply to ply) for frames, shutters. The job shall include fixing of dulmica of approved shade/texture on all exposed surfaces, inner linings prefrebly white (Mica), hardware fittings like hinges, handles, tower bolts. locks, hanger rail etc as per requirements of architectural drawings or as directed by the Engineer-In-charge, complete job ) (600mm deep) |
| 26 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): First class deodar wood |
| 27 | Supplying, fitting and fixing 8mm thick AC4 Grade Waterproof Laminated woodenFlooring Work including cornice of required size with plank size not less than 1218mmx 193mm) mm (with unilin/tongue-groove locking arrangement) having 0.2mm thicktop abrasive layer over a decorative layer followed by a High-density fibreboard (HDF)having density > 850 kgJrn3 substrate core over a resin saturated backing layer andinstalling through unilin or tongue- groove system (having locking strength not less than1000 kg/m) over a 2 mm thick underlayer polyurethane foam on polythene sheet 250microns, over a smooth, flat, hard subfloor free from moisture (<8%), grease etc,complete in all respect with requisite accessories like end profile, transition profile,reducer T profile etc. wherever required and preparation of base including all other incidental works as per direction & satisfaction of Engineer in charge |
| 28 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia |
| 29 | Providing and fixing brass bib cock of approved quality. 15 mm nominal bore |
| 30 | Providing and fixing angle valve of approved quality. 15 mm nominal bore |
| 31 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with brackets of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. |
| 32 | Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms. |
| 33 | Providing and fixing towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms. |
| 34 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 1500x450 mm |
| 35 | Providing and fixing Wall hanging health facuet of approved make (hindwire or equivalent brand) with all necssary fixtures. Complete job |
| 36 | Providing and fixing grating of approved quality and colour. Circular type 150 mm nominal size square 100 mm diameter of the inner hinged round grating |
| 37 | Providing and fixing complete divertor set with plate, single liver ,spout, body and wall shower incl all neccessary fittings and fixtures. Complete job[jaquar or equival brand) |
| 38 | Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. PN-16 pipe, 16mm OD(SDR-7.4) |
| 39 | PN-16 pipe , 20mm OD(SDR-7.4) |
| 40 | PPR Union 20mm |
| 41 | Providing and fixing ball valve 20 mm PPR of approved make |
| 42 | Providing and placing on terrace (Stand) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 43 | Providing and fixing PVC pipes including PVC fittings laid in required gradient, inclding cost of all fixing accessories complete job as directed by EIC 75mm dia |
| 44 | 100 mm dia |
| 45 | Providing , installation, commissioning and testing Hot water Geyser of approved make (Racold, Jaguar or equivalent) including fixing with bolts and making necessary connections. |
| 46 | carriage of material by using mech tpt for an average lead of 50kms Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodaySep 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender