Tender For Providing Sprinkler Fire Fighting Arrangements For Centre Of Excellence Building For All Floors (G+5) In Government Arignar Anna Memorial Cancer Hospital At Karapettai In Kancheepuram District.
Tender Value
5.72 Crore
Estimated cost
Bid Submission
28 Sep 2026
17 days left
EMD
2.97 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kanchipuram → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Sprinkler Fire Fighting Arrangements For Centre Of Excellence Building For All Floors (G+5) In Government Arignar Anna Memorial Cancer Hospital At Karapettai In Kancheepuram District.
BOQ
| Sl. No. | Item Description |
| 1 | Supply, erection, testing and commissioning of following MS ‘C’ Class Heavy Duty Pipe as per IS 1239 to withstand a developing pressure of 10 kg. / sq.cm including necessary fittings like MS flange of table ‘E’, elbows, reducers, gaskets, bolt, nuts with washers & joints as per standard method of arc welding, including one coat metal primer and two coat Post Office Red painting including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: JINDAL / EQUIVALENT. |
| 2 | 200mm dia |
| 3 | 150mm dia |
| 4 | 100mm dia |
| 5 | 80mm dia |
| 6 | 65mm dia |
| 7 | 50mm dia |
| 8 | 40mm dia |
| 9 | 32mm dia |
| 10 | 25mm dia |
| 11 | Providing, fixing pipe supports from columns / wall or suspenders from roof slab to suit various dia of pipes made out of GI / MS adjustable rods threaded for a sufficient length to adjust the height of support along with clamping arrangement for holding pipes of anchor fastening, arrangement design of hanger and should confirm with specification. |
| 12 | 100mm dia |
| 13 | 80mm dia |
| 14 | 50mm dia |
| 15 | 40mm dia |
| 16 | Supplying and fixing of Mild steel angle of approved design, including cutting the members, welding, grinding, one coat of priming coat using best approved quality red oxide primer, dismantling of walls / concrete if necessary, fixing and finishing the dismantled portion to original condition etc., complete complying with standard specification. |
| 17 | Supply and fixing of Fire fighting application oblique type stainless steel Hydrant Valve of size 63mm dia with oblique type instantaneous coupling with rotating wheel to open and close the valve including MS flange of table “E”, bolts & nuts with washer as per IS 5290 at ring main around the building and wet riser inside the building including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc complete as per standard specification and as directed by the Departmental Officers. |
| 18 | Supply, and fixing in position of Fire Fighting Application Hose of 63mm dia of 15 metres length binded by copper wire with 63mm dia stainless steel male and female instantaneous fire fighting special coupling as per IS 901 as directed by the Departmental Officers. Near every hydrant points including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR/ LIFE GUARD / SAFE GUARD / EQUIVALENT. |
| 19 | Supply, and fixing in position of Fire Fighting Application 63mm dia stainless steel short length Branch Pipe with hexagonal type spray nozzle of 15mm (or) 20mm jet bore. Near every hydrant points including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. |
| 20 | Supply of Fire Fighting Application MS Hose Box to keep two number of hoses and 1 No. of branch pipe with nozzle having proper glass window type double door with universe open key, painted inside white and outside Post Office Red. Near every hydrant point including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. |
| 21 | Supply, installation of Fire Fighting Application 180 degree swinging type, hose reel drum with 20mm dia braided thermoplastic hose of 30 metres long, so as to extend to necessary distance by self rolling spindle wheel including necessary 20mm dia ball valve and open and close spray nozzle, warm clip, etc., as per the standard pattern of any reputed make at every floor nearer to hydrant valve, including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary., etc., complete as per standard specification and as directed by the Departmental Officers. |
| 22 | Supply and fixing nominal bore quartized bulb type sprinkler bulb 68 Deg C fast response pendent type including GI collar for each sprinkler bulb, mounted in MS pipe line using suitable size MS threaded coupling, thread, shellac etc., as per standard methods and including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. |
| 23 | Wrapping and coating anti-corrosive treatment for the following under ground MS pipe having one coat of anticorrosive metal primer, one layer of asphalt tar tape wound over the MS Pipe as per standard methods as per standard specifications and as directed by the Departmental Officers. 150mm dia |
| 24 | Supply, erection, testing and commissioning of cast iron body and bronze internal non-rising spindle sluice valve of sizes at required places to control the flow of water including necessary MS flange of table ‘E’, gaskets, bolts & nuts including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. |
| 25 | 200mm nominal dia |
| 26 | 150mm nominal dia |
| 27 | 100mm nominal dia |
| 28 | 80mm nominal dia |
| 29 | 65mm nominal dia |
| 30 | Supply, erection, testing and commissioning of Cast iron body and Gun metal or stainless steel internal Non-return valve of following sizes to control one way flow of water to be installed pump room at delivery line and near overhead tank at terrace level near to jockey pump and motor including necessary MS flange of table ‘E’, gaskets, bolts & nuts, etc. as per IS 5312 including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. |
| 31 | 200mm nominal dia |
| 32 | 150mm nominal dia |
| 33 | 100mm nominal dia |
| 34 | Supplying installation testing and Commissioning of Brass ball Valve having flanked/ Screed with unions end as per specification with factory finish necessary flanse Hot Dip GI Unbolts & Wagers Pornthip etc., Completed as per Standard Specification |
| 35 | Ball Valve 25mm |
| 36 | Supply and fixing of stored pressure ABC (Mono Ammonium Phospate) Powder Type Fire Extinguisher of 6 kg. capacity as per IS:15683 with pressure gauge, discharge hose & control nozzle, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, neccessary scaffolding and re doing the dismantled portions to its original condition wherever found neccessary etc, complete as per standard specification and as directed by the Departmental Officers. |
| 37 | Supply and fixing of Carbon-di-Oxide Gas Type 2 kg capacity Fire Extinguisher as per New IS15683, complete with control valve, discharge hose with horn, wall mounting bracket, safety clip etc.including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directed by the departmental officers. |
| 38 | Supply, erection, testing and commissioning of Fire Fighting Application Horizontal Centrifugal Type Pump rated for 2850 LPM at 110 metres head with Electrical Motor of 60HP of 415 volt, 3 phase connection complete with base plate and accessories. (Make Kirloskar or Equivalent). The rate inclusive of neessary vibration, bed mounting, etc., as per standard specifications and as directed by the Departmental Officers |
| 39 | Supply, erection, testing and commissioning Mono Block type Fire Fighting Pressurisation Pump of 180 LPM 110 metres head at 10 HP with suitable base frame including necessary vibration bad mounting etc.,including conveying, fixing and incidental charges.,etc., complete as per standard specification and as directed by the Departmental Officers. (Make: Kirloskar / Equivalent) |
| 40 | Supplying, installation, testing and commissioning of Fire Fighting Electrical Control Panel of cubical construction, floor mounted type fabricated using CRCA sheet, compartmentalised with hinged lockable door dust and vermin proof, cable alley, inter connection having switch gears and accessories mounting and internal wiring, earth terminals, numberings, necessary metering protections and indications complete in all respect suitable for operation on 415volt, 3 phase, 50 Hz AC supply with enclosure protection class IP 54 and mounted with the followings. A. Common Panel in Fire Pump HouseC (i). IncomerC a.1 No. 600A TP & N SDFU with HRC fusesC b. 1 set of 600A, 4 bar aluminium bus bar, 415 V, 50 HZ AC supply, c. 1 No. (0-500A) digital ammeter with selector switch & CTs, d. 1 No. (0-500V) digital voltmeter with selector switch and control fuses, e. 3 Nos. phase indication lamp LED type with toggle switches with control fuses, (ii). Outgoing: a. Main Fire Pump 400 A TPN SDFU with HRC fuses with sutable HP fully automatic starter / delta starter with over load protection, digital ammeter with built-in selector switch and suitable CTs, current sensing type single phasing preventer complete with all accessories and internal wiring required for automatic operation, selector switch for auto / manual / OFF operation - 1 No. Each 612100.00, b. Jockey Pump 125 A TPN SDFU with HRC fuses with suitable HP fully automatic starter / delta starter with over load protection, current sensing type single phasing preventer complete with all accessories and internal wiring required for automatic operation, selector switch for auto / manual operation - 1 No., Contd.... |
| 41 | c. Diesel Engine Control comprising of: 1. Auto / manual selector switch and 3 attempt starting device, timers and relays as required, push buttons, start / stop in manual mode. 2. Indication lamp for high / low lubricant oil pressure, high water temperature and engine ON indication. 3. Battery charger suitable for 12V /24V DC with boost and tickle selector switch, 0-15V / 0-30V DC volt meter, 0-20A DC ammeter, 4. All standard relays and accessories for automatic operation of diesel engine. 5. The above combined panel mounted over MS channel fabricated frame with cement concrete platform, all other connection works carried out as per standard methods and including conveying, fixing and incidental charges, etc., complete as per standard specification and as directed by the Departmental Officers. |
| 42 | Supply, erection, testing and commissioning of Fire Fighting 4 Way Fire Brigade Inlet with necessary gun metal 63mm dia non return spring shutter arrangements, so that to control one way flow at the time of emergency water supply by fire and rescue service fire engine entry including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. |
| 43 | Supply and providing 1000 litres capacity Priming Tank made up of PVC. |
| 44 | Priming Tank mounted with the supporting arrangement fabricated using MS angle for the height of 3 metres from the floor level, inlet, outlet, and drain arrangements inside the fire fighting pump room, as directed by the Departmental Officers. |
| 45 | Supply and laying of following sizes of Armoured Aluminium / Copper Cables for electrical motor, control panel, pressure switch, jockey motor etc., all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: POLYCAB / PARACON / FINOLEX / EQUIVALENT. |
| 46 | 4 core 240 sq.mm. armoured aluminium cable |
| 47 | 3 core 185 sq.mm. armoured aluminium cable |
| 48 | 3 core 10 sq.mm. armoured copper cable |
| 49 | 10 core 2.5 sq.mm. armoured copper cable |
| 50 | 2 core 2.5 sq.mm. armoured copper cable |
| 51 | GI Hot dip/ Powder Coated 16 SWG Cable Tray as directed by the departmental officers. |
| 52 | With 150mm width and 50mm height |
| 53 | With 300mm width and 50mm height |
| 54 | Supply, erection, testing and commissioning of Pressure Gauge with 0 to 14 kg. range of reputed make with necessary valve, milling thread MS coupling fixed at delivery pipe line in pump house to read the developing pressure including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantledportions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. |
| 55 | Supply, erection, testing and commissioning of suitable Pressure Switch of reputed make line Indfoss or Donfoss including necessary valves, couplings, etc., connected with electrical main control panel and setup at proper differential so as to auto start and auto stop the electrical motor, jockey motor including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., completed as per standard specification and as directed by the Departmental Officers. |
| 56 | Motorized Butterfly Valve:Sizes DN50...DN500 (Wafer Typе) Nominal pressure PN16 Tightness Bubble tight, Medium Temperature-10 +110 Maximum, Body Material IS: 210, FG 220 CI, Stem Material ASTM A276, GR SS 410, Disc Material Epoxy coated ductile iron Disc, Liner Material EPDM, Medium Type Chilled and Hot water Pipe Connection ISO7005-2 |
| 57 | Lever Deluge Alarm Valves are used as \\"automatic water control valves\\" in deluge, pre-action, and special types of fire protection systems such as foam water and double interlock. The Valves also provide for actuation of fire alarms upon system operation. |
| 58 | Life safety related signage's (EXIT, DIRECTION ARROWs i.e., left ,right ,straight ,down up, Both way, MCP etc) as per site condition. The size of the board shall be 10cm x 30 cm |
| 59 | A3 evacuation plan board is a printed safety plan, typically made of acrylic, displaying a building's layout and emergency routes. It's designed to help people quickly understand escape paths and safety equipment locations during emergencies. These boards often feature photoluminescent elements for visibility in low-light conditions and can be customized with different languages. |
| 60 | Assembly point 12\\"x12\\" as directed by the departmental officers. |
| 61 | Talk Back System as directed by the departmental officers. |
| 62 | Fire fighter Telephone System Panel |
| 63 | Firefighting Telephone Jack |
| 64 | Firefighting Telephone Handset |
| 65 | Public Addressing System as directed by the departmental officers. |
| 66 | 6W Ceiling speaker |
| 67 | 6W Wall Mounted speaker |
| 68 | 16 Zone controller Panel with Keypad |
| 69 | 500 Watts Amplifier |
| 70 | Talk Back & PA System Cables PA & Talk back Armoured Cable 2 x 2.5 Sqmm |
| 71 | Supply and installation of Anutone (or) Equivalent Brand of Acoustical False Ceiling of Sisoli Serene / Slate Spirts / Slate Polka Mineral Fibre/ GRG Core Ceiling Tiles of size 595 x 595 x 15mm having volume density 270 kgs / m3, weight 4kg / m2 which is suspended by using 0.3mm thick skelet trelis T15 metal grid system. The skelet trelis T15 metal grid system of 600 x 600mm module includes skelet WA15 W30 wall angle with unequal flanges of 15 / 19mm, length 3000mm, fixed along the perimeter of walls with the help of nylon sleeves and suitable fasteners at 300mm centers. Then suspend the skelet MT15 W36 MainT with flange width 15mm, height 32mm and length 3600mm, from the soffit slab with help of soffit cleat and wire rod with leveling spring clip at 1200mm centres. Skelet CT15 W12 CrossT with flange width 15mm, height 26mm and length 1200mm is interlocked into the pre-cut slots in the Main T15 at 600mm centers in the perpendicular direction to the Main T15. Finally skelet CT15 W06 CrossT with flange width 15mm, height 26mm and length 600mm are interlocked into the precut slots in the CT15 W12 CrossT in direction parallel to the Main T15 to result in 600 x 600mm module. Sisoli Serene / Slate Spirts / Slate Polka of size 595 x 595 x 15mm shall be placed into the grid size of 600 x 600mm. The systems to achieve noise reduction coefficient not less than 0.5 NRC, so as to have an neat appearance as directed by the department offices. The cost includes, cost of material, cost of labour, Scaffolding, transportation, conveyance, etc., complying to standard specication. |
| 72 | Dadooing walls with Virtified Tile of Size 800 x 800 x 10 mm best approved quality, tiles of sizes set in Cement Mortar 1:2 (One Cement and Two B-sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers. |
| 73 | Supply and erection of Double Leaves Fire Rated Door with Frame having the dimension of 1800mm x 2400mm with following specification: a. Door Frame 1.6mm: Galvanized 120 GSM branded make JSW, b. Door Leaf 1mm: Galvanized 120 GSM branded make JSW, c. Shutter Thickness: 46mm, d. Honeycomb: In-fill, e. Glue Macroplast UR-7221, f. Door Hinges: 4” x 3” x 3mm, Double Ball: Make Assa Abloy Yale Ball bearing Butt Hinges Grade SS 304 - Finish SS, g.Door Closer with Standard Arm Finish: Silver, h. Lock Set: Dead Lock with both side key, i. Door Orientation: To be confirmed by client, j.Mounting of door: Brick wall mounted, k. Powder Coating: Powder coated in standard RAL paint colour of PO Red (60 to 90) Microns, l.Single Point Panic Bar (2 Horizontal): Make Assa Abloy Yale or Equivalent, m. Dead Lock with both side key: Make Assa Abloy Yale or Equivalent, n. Vision Panel 200 x 300mm 2 Hrs. Fire Glass Schott Pyran with Frame, o. Rated Glass Schott Pyran with Frame, p. Anchor Bolt with Endcaps. The above assembly mounted on concrete or brick wall including the cost of cutting, chipping, concrete packing, pastering, scaffolding all other conveyence as per standard methods and as directed by the Departmental Officers. |
| 74 | GST @ 18 % Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysSep 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender