Tender For Addn/ Altn To Stair Case Bldg No P-55 At Hq Bsa (Job A); Addn/ Altn And Repair To Toilet Block Of Adm Block Of Bldg No P-01 At Command Hospital (East Comd) (Job B) And Provn Of Compound Wall Rear Side Bldg No P-15 At Hq Bsa (Job C) Under G
Tender Value
21.72 Lakhs
Estimated cost
Bid Submission
08 Oct 2026
4 days left
EMD
43440
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addn/ Altn To Stair Case Bldg No P-55 At Hq Bsa (Job A); Addn/ Altn And Repair To Toilet Block Of Adm Block Of Bldg No P-01 At Command Hospital (East Comd) (Job B) And Provn Of Compound Wall Rear Side Bldg No P-15 At Hq Bsa (Job C) Under Ge (Alipore) Kolkata.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 24-Sep-2026 | Date corrigendum | Date | 08-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Common items for JOB 'A' & 'B' |
| 2 | Demolition of brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework and precast concrete articles including removal of debris outside MoD land complete all as specified and directed. |
| 3 | Taking down cement plaster on brick or stone wall surfaces including glazed tiles wherever exists including raking out joints, hacking for key and scrubbing down with water including removal of debris outside MoD land complete all as specified and as directed. |
| 4 | M&L for 15mm thick cement plaster with CM (1:6) on other than fair faces of brick wall finshed even and smooth without using extra cement complete all as directed. |
| 5 | Preparing surfaces of new decorated plastered or unplastered surfaces of wall, pillasters, cornices etc and M&L for applying two coats of acrylic distemper over 1mm thick wall care putty complete all as specified and as directed. |
| 6 | Preparing new decorated plastered or unplastered surfaces of ceiling, pillasters cornices etc and M&L for applying one coat of 1mm thick wall care putty with & including two coats of acrylic distemper emulsion complete all as specified and as directed. |
| 7 | M&L for applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 8 | Common items for JOB 'A', 'C' |
| 9 | M&L for providing plain cement concrete in foundations, filling and mass concrete, type D2 1:4:8 (using 40 mm graded stone aggregates) complete all as specified and directed. |
| 10 | M&L for brickwork with subclass 'B' bricks, straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed. |
| 11 | M&L for rendering 15 mm thick on fair faces of brick work in cement morter 1:4 finished even and smooth (without using extra cement) complete all as specified and directed. |
| 12 | M&L for 25mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in bedding of tiles/kota complete all as specified and directed. |
| 13 | M&L for 16 to 18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like over and including 15mm thick cement mortar bedding (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including demolition of existing slab complete all as specified and directed. |
| 14 | Items only for JOB 'A' |
| 15 | Demolition of cement concrete of any description and in any position not other wise specifically provided for including removal of debris outside MoD land complete all as specified and as directed. NOTE: Works shall be executed in bldgs upto 12 stories height. |
| 16 | M&L for brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walling built in cement mortar 1:4 complete all as specified and directed. |
| 17 | M&L for 10mm thick plastering in ceiling surfaces in CM (1:3) surface finished even and smooth without using extra cement complete all as specified and directed. |
| 18 | Preparation of old plastered surfaces of wall and M&L for applying two coats of oil emulsion distemper over and including a coat of primer and 3mm thick wall care putty on wall complete all as specified and directed. |
| 19 | Preparation of old surfaces of wall and M&L for applying one coat Exterior Acrylic Emulsion paint on external surface including nescessary scaffolding NOTE: Works shall be executed in bldgs upto 12 stories height. |
| 20 | M&L for Machine cut kota stone slab flooring 18-20mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab with & including rubbing and polishing incl 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 21 | M&L for Machine cut kota stone slab 18-20mm thick as in risers of steps, skirting, dado and pillar and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishingand with 15mm thick rendering in CM 1:6 complete all as specified and directed. |
| 22 | M&L for 75 mm thick PCC 1:4:8 Type D-2 using 40mm graded stone aggregate as in sub base complete all as specified and directed. |
| 23 | Preparation of new steel surfaces of any description over 10cm width or girth and M&L for applying two coats of synthetic enamel paint over & including a coat of red oxide zinc chrome primer complete all as specified and directed. |
| 24 | S&F Mild Steel framed work such as grills, gratings, etc. with ends of bars shouldered and or riveted, or forged into spikes, framed guard bars, barred iron doors, railings and similar work conforming to Fe-290 Gde E-165; design/shape as approved complete all as specified and directed. |
| 25 | M&L for 75mm thick cement concrete type C-2, 1:3:6 using 40mm graded stone aggregate as in plinth protection, sub base, etc complete all as specified and directed. |
| 26 | Items only for JOB 'B' |
| 27 | M&L for brick work with flyash old size bricks, straight or curved on plan to any radius in half brick thick walling built in cement mortar 1:4 complete all as specified and directed. |
| 28 | M&L for 5mm thick plastering on ceiling surfaces in CM (1:3) surface finished even and fair complete all as specified and directed. |
| 29 | M&L for 20mm thick plastering (in two layer of 10 mm thick) on fair face of brick surfaces with CM (1:4); second layer mixed with WPC as per manufacturers instructions; surface finished even and smooth with out using extra cement complete all as specified and directed. |
| 30 | Taking down chowkhats or frame with shutter (without taking off shutters from the frame) area exc 1.5 sqm n.exe 4 sqm each complete all as specified and directed. |
| 31 | S&F factory made 2nd hardwood plain solid straight chowkhats, wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed. |
| 32 | S&F Factory made 30 mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides with both face covered with decorative face veneer with lipping/frame to match complete all as specified and directed. |
| 33 | S&F anodised powder coated aluminium (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators or aluminium frame for partition works etc with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 34 | S&F anodised aluminium grill (anodised transparent or dyed to required shade according to IS:1868) of approved design/pattern, with approved standerd section and fix to the existing window frame with C.P brass/stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and directed. |
| 35 | S&F 4.8 mm thick glass ordinary quality, frosted on one side fixed to aluminium frame work n. exc 0.5 Sq. m in each pane complete all as specified & as directed. |
| 36 | S&F floor power door stopper overall length of cover plate 150mm of zink alloy body and fixed in floor complete all as specified & as directed. Make : Prayag Cat Part No DSZ-PW6-SS or equivelant as approved by GE. |
| 37 | S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified & as directed. |
| 38 | S&F aluminium 4 levers Mortice lock, vertical type, size 100 mm complete all as specified and directed. |
| 39 | S&F Stainless steel handles 150mm long, bright polished complete all as specified and directed. |
| 40 | S&F Stainless steel Hinges 100mm long, bright polished complete all as specified and directed. |
| 41 | S&F 200mm long sliding door bolts with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bots and sliding bolts of extruded or cast aluminium alloy complete, all as specified |
| 42 | S&F Stainless steel barrel tower bolts of extruded section with 150 mm long bolt, complete all as specified and directed. |
| 43 | S&F for Stainless steel wire cloth having 0.36 mm nominal dia of wire and average width of appreature 1.40 mm and fixed with stainless wire staples complete all as specified and directed. |
| 44 | S&F in repairs aluminium (extruded section) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed. |
| 45 | M&L for suspended false ceiling (Decorative Type) system using metalic (E grid) exposed suspende system, grid section size 600mm x 600mm comprising of GI powder coated main runner of dimension 32 mm x 24mm x 0.80mm thick (thickness comprising of GI/0.4 + PPPCGS/0.3mm & weight of Runner) Cross Tee of dimensions 26mm X 24mm x 0.8 mm thick, wall angle 22.00mm x 22.00mm x 0.35 mm thick (thickness comprising of GI/0.35 + PPPCGS/0.3 mm) with and including 4 mm thick HPSC (High pressure steam cured) pre- primed, self embossed textured designer board, water resistant termite resistant, fire resistant for insulation and accustic purpose to be placed in the grid system duly suspended with 2 mm dia G I bars hangers fixed with steel dash through fasteners with provisions of light fixture complete all as specified and directed. |
| 46 | Dismantling floor, earth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store including removal of debris outside MoD land complete all as specified and directed. |
| 47 | M&L for full body homogeneous vetrified tiles tiles 9-10 mm thick (Square/ rectangular) polished, area of each tiles exc. 0.18 sqm but n.exc 0.36 sqm, in floors etc. set and jointed with adesive and pointed in epoxy grout with spacers complete all as specified and directed. |
| 48 | M&L for glazed ceramic (coloured) tiles of size 600mm x 1200mm x 6-7 mm thick as in vertical surfaces/dado set and jointed with adesive and pointed in white or coloured cement to match complete all as specified and directed. |
| 49 | Demolition of cement concrete above ground floor n.exe 15cm thickness (below or above ground level) complete all as specified and directed. |
| 50 | S&F in repairs one piece EWC, Snow white, with slim soft close seat cover and S-Trap 220 mm , including connection to drain ( or outgoing pipe) complete all as specified and directed. |
| 51 | S&F in repairs vitreous china Table Top wash basin, white, including cutting for and pinning in ends of and including brackets, waste pipe & CP brass waste coupling of 32mm dia complete all as specified and directed. |
| 52 | S&F in repairs Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and directed. |
| 53 | S&F in repairs 15mm bore CP angular cock with wall flange, fancy type, with crutch handle, screwed for iron pipe or for brass ferrule and fixed of following size complete all as specified and directed. |
| 54 | S&F in repairs 15 mm Dia CP Bib taps with wall flange and aerator, fancy type with crutch handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 55 | S&F in repairs 15 mm Dia CP Bib taps (Two-in-one), with wall flange and aerator, fancy type with crutch handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 56 | S&F in repairs 15 mm Dia CP stop cock(concealed type) ,fancy type with crutch handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 57 | S&F in repairs 15 mm bore CP single lever basin mixer with 305 mm extended body and 600mm braided connection pipe, screwed down for pipe, high pressure complete all as specified and directed. |
| 58 | S&F in repairs 25 mm Dia brass gun metal gate valve, with crutch handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 59 | S&F in repairs 15 mm bore brass CP Wall mixer, Fancy type with 210 mm long bend pipe for overhead shower, for mixing Hot and Cold water screwed down for iron pipe, complete all as specified and directed. |
| 60 | S&F in repairs CP Health faucet ABS body with 1 meter SS braided connection pipe complete all as specified and directed. |
| 61 | S&F in repairs 600 mm PVC connection pipe 15 mm size with PTMT nut complete all as specified and directed . |
| 62 | S&F in repairs 110/125 mm floor trap fixed in floor with grating incl jointing with solvent 1:2:4 cement concrete complete all as specified and directed. |
| 63 | S&F 1200 mm x 600 x 5 mm mirror with decorative type double coat for protection and longevity and on silver plating the back for better reflection including necessary fittings complete all as specified and directed. |
| 64 | S&F in repairs brass CP Shower roses 150x150 mm, including fixing to steel pipes or union complete all as specified and directed. |
| 65 | S&F CP Soap dish, fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 66 | S&F in repair brass CP Tubular towel rack, 600 mm long between flanges complete all as specified and directed. |
| 67 | S&F brass CP toilet Paper Holder with flap guard complete all as specified and directed. |
| 68 | S&F Corner glass shelf, 250mm size with 2 racks complete all as specified and directed. |
| 69 | M&L for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing etc., and making good, cutting not exc 10 cm girth complete all as specified and directed. |
| 70 | Taking up or down 20mm bore steel water tubing and connections, complete all as specified and directed. |
| 71 | Taking up or down 25mm bore steel water tubing and connections complete all as specified and directed. |
| 72 | Taking down UPVC pipe 50 mm bore with fittings complete all as specified and directed. |
| 73 | Dismantling of 100mm cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, complete all as specified and directed. |
| 74 | S&L 20 mm bore (Outer dia) CPVC pipes of SDR 11 and plain CPVC SDR 11 fitting fixed on wall or floor (concealed ), ceiling or laying in floors complete all as specified and directed. |
| 75 | S&L in 25 mm bore (Outer dia) CPVC pipes of SDR 13.5 and plain CPVC SDR 11 fitting fixed on wall or floor, ceiling or laying in floors complete all as specified and directed. |
| 76 | S&F 50 mm bore (Outer dia) UPVC pipes of SCH-40 and plain UPVC SDR 11 fitting fixed on wall or floor, ceiling or laying in floors complete all as specified and directed. |
| 77 | S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 78 | S&F 20 mm bore CPVC Male Brass Threaded Adaptor (MTA/ MBTA) complete all as specified and directed. |
| 79 | S&F 25 mm bore CPVC Male Brass Threaded Adaptor (MTA/ MBTA) complete all as specified and directed. |
| 80 | S&F 20mm bore CPVC Female Brass Threaded Adaptor (FTA/ FBTA) complete all as specified and directed. |
| 81 | S&F 25mm bore CPVC Female Brass Threaded Adaptor (FTA/ FBTA) complete all as specified and directed. |
| 82 | S&F 50 mm bore CPVC Male Brass Threaded Adaptor (MTA/ MBTA) complete all as specified and directed. |
| 83 | S&F 50 mm bore CPVC Female Brass Threaded Adaptor (FTA/ FBTA) complete all as specified and directed. |
| 84 | S&F PVC (SWR) 110mm dia bend complete all as specified and directed. |
| 85 | S&F PVC (SWR) junction single, (Single T) equal or unequal 110 mm dia complete all as specified and directed. |
| 86 | Complete removal of existing treatment by using electric sander machine or steel wire brushing to remove all dust and loose scale etc of wall surfaces & prepare to receive wall care putty complete all as specified & directed. |
| 87 | M&L for 2 mm thick wall care putty on wall including rubbing with sand paper to achieve a smooth surface & sharp straight edges etc. complete all as specified & as directed. |
| 88 | Preparation of newly plastered wall surfaces and M&L for applying two coats of oil emulsion distemper over & including a coat of primer on complete all as specified and directed. |
| 89 | M&L for applying two coats of synthetic enamel paint on old wooden surface exc 10cm width or girth including preparation complete all as specified and as directed. |
| 90 | Supply only Intregal water proofing compound complete all as specified and directed. |
| 91 | Items only for JOB 'C' |
| 92 | Excavating in trenches n. exc 1.5 m wide and n. exc 1.5 m in depth for foundation etc or for shafts, wells, cesspits manholes, pier holes etc n. exc 10 sqm on plan and n. exc 1.5 m in depth and getting out in loose/soft soils complete all as specified and directed. |
| 93 | Returing filling in including spreading, levelling, watering and well remming in layer not exc 25 cm in soil complete all as specified and directed. |
| 94 | Removing excavated material exc 1.5 km and n. exc 5 km depositing where directed at a level n. exc 1.5 m in soil complete all as specified and directed. |
| 95 | M&L for providing cement concrete type B-1 1:2:4 (using 12.5 mm graded stone aggregate) as in benching concrete, coping, hold fast etc complete all as specified and directed. |
| 96 | M&L for rendering 15 mm thick on fother then fair faces of brick work or on one side of lathing in cement morter 1:4 finished even and smooth (without using extra cement) complete all as specified and directed. |
| 97 | Preparation on new plastered surfaces of wall and M&L for applying two coats of anti-algae and anti-fungal exterior grade weather coat paint over & including a layer of 1mm thick wall care putty complete all as specified and directed. |
| 98 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed. |
| 99 | S&F 16 to 18mm thick Dholpur stone cladding gang saw cut with machine cut edges, uniform colour of each stone size not exceeding 0.25 sqm fixed with and including, making V groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing & including silicon treatment complete all as specified and directed. |
| 100 | M&L for Non-Skid ceramic coloured floor tiles as in floor 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm as in floor etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles laid over and including 15mm thick cement screed bed in CM (1:6) complete all as specified and directed. |
| 101 | M&L for Glazed ceramic tiles of size 450mm x 300mm x 7-8mm thick in verticle surfaces set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles laid over and including 10mm thick cement plaster in cement mortar (1:4) complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 24, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 08, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 4 daysOct 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysOct 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender