Tender For Civil And Renovation Work Of Mdp Lounge And Toilet At Iim Lucknow
Tender Value
28.98 Lakhs
Estimated cost
Bid Submission
17 Sep 2026
3 days left
EMD
58000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Civil And Renovation Work Of Mdp Lounge And Toilet At Iim Lucknow
BOQ
| Sl. No. | Item Description |
| 1 | Civil and interior Work for MDP Lounge |
| 2 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. |
| 3 | Providing and laying Vitrified/ GVT/ DGVT floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x1200 mm |
| 4 | Providing and laying Vitrified/ GVT/ DGVT tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x1200 mm |
| 5 | Providing & fixing false ceiling at all height including providing & fixing of framework made of special section, power pressed from M.S. sheets and galvanised with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleat of size 25mm wide x 1.6mm thick with flanges of 27mm and 37mm, at 1200mm c/c, one flange fixed to the ceiling with dash fastener 12.5mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25 x10 x0.50mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I chanels 45 x15 x 0.90mm running at the spacing of 1200 mm c/c, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having lips of 10.5mm, at 450mm c/c, shall be fixed in a direction perpendicular to G.I intermediate channel with connecting clip made out of 2.64mm dia x 230mm long G.I wire at every junction, including fixing perimeter channels 0.50mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/ partitions with the help of Rawl plugs at 450mm centre, with 25mm long dry wall screws @ 230mm interval, including fixing of Calcium Silicate Board to ceiling section and perimeter channels with the help of dry wall screws of size 3.5 x25mm at 230mm c/c, including jointing & finishing to a flush finish of tapered and square edges of the board with recommended jointing compounds, jointing tapes,finishing with jointing compounds in three layers covering up to 150mm on both sides of joints and two coats of primer suitable for boards, all as per manufacture's specification and also including the cost of making opening for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed, all complete as per drawings, specificaton and direction of the Engineer in charge but excluding the cost of painting with: Framing to be as per the design requirement for fixing the board/ WPC. as per the grooves etc including cove making, making the cutouts for lights/ speakers/ any other equipment and making cutout for the projector trolley, A.C. indoor unit etc. including the peripheral framing as per the requirement arround the cutout for fixing the A.C indoor unit etc. complete as per the instructions of Engineer Incharge. 8 mm thick Calcium Silicate Board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process |
| 6 | Providing and fixing PVC Louvers in false ceiling/Wall Cladding, including all materials, labour, supporting framework, accessories, trims, fittings, cutting, fixing, alignment, finishing and all other incidental works, complete in all respects as per site requirements and as directed by the Engineer-in-Charge. |
| 7 | Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead: Thickness above 10 mm to 25 mm |
| 8 | Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/ sqm(both side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, Galvanised M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each with zinc coating of 120 gms/sqm(both side inclusive)) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture's specification and direction of engineer in charge all complete 66mm overall thickness partition using 8mm thick double skin multipurpose cement board reinforced with cellulose fibre manufactured through autoclaving process (High pressure steam cured) as per IS : 14862 with suitable fibre cement screws |
| 9 | Providing and fixing, in position concealed G.I. section for wall paneling using board of required thickness fixed on the 'W' profile (0.55 mmthick) having a knurled web of 51.55 mm and two flanges of 26 mmeach with lips of 10.55 mm, placed @ 610 mm C/C in perimeter channelhaving one flange of 20 mm and another flange of 30 mm with thicknessof 0.55 mm and web of length 27 mm. Perimeter channel is fixed on thefloor and the ceiling with the nylon sleeves @ 610 mm C/C with fullythreaded self‐tapping dry wall screws. Board is fixed to the 'W' profilewith 25 mm countersunk ribbed head screws @ 200 mm C/C., allcomplete as per the drawing & directions of engineer‐in‐charge, thejoints of the boards are finished with specially formulated jointing compound and 48 mm wide jointing tape to provide seamless finish. Multipurpose cement board reinforced with suitable fibre cement screw. 8 mm thick cement fibre board as per IS : 14862 |
| 10 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) Asian paint aspira or equivalent as approved by Engineer-in- charge |
| 11 | Providing and applying white cement based putty of average thickness 1mm of approved brand and manufacture over the plastered wall surface to prepare the syrface even and smooth complete. |
| 12 | Providing & Fixing of Premium Self-Adhesive decorative type Waterproof Wallpaper a versatile and high-quality roll covering provides excellent protection against moisture and stains as per Aproved Design, Thickness, texture/ finish etc. including pasting it with the suitable addtional Adhesive properly complete as per design/ drawings and instructions of Engineer. |
| 13 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar |
| 14 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 15 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 16 | 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) |
| 17 | Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect. SBR Polymer (@10% of cement weight) modified cementitious bond coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer |
| 18 | Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers. |
| 19 | Applying a high-quality, two-component PU paint (matte or glossy) over prepared surfaces of Aluminium windows and doors, including sanding, primer, and multiple topcoats to achieve a smooth, durable finish complete. as per instructions of Engineer-in-charge |
| 20 | Providing and fixing stainless steel (SS 304 grade) adjustable friction windows stays of approved quality with necessary stainless steel screws etc. to the side hung windows as per direction of Engineer-in-charge complete. 205 X 19 mm |
| 21 | Taking out existing wooden door shutter, repair by cutting, painting, removing old damaged laminates, removing fixtures etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. |
| 22 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below |
| 23 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 24 | Providing and fixing marine ply - 19mm thick ply Conforming to IS 710 and boral proof of approved brand and shade with suitable full threaded steel screws etc. in partitions, including laminate/venner and polish, whatever required to complete the job etc. complete job as per direction of Engineer-in-charge . |
| 25 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.0 mm thick. Laminate to be fixed on existing door constructed as per Above item with proper grooves etc. as per the drawing/ design/ instructions of the Engineer Incharge. |
| 26 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With stainless steel cover plate minimum 1.25 mm thickness |
| 27 | Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including welding of additional MS plate of required thickness to withstand the door weight fixed one double action hinges and proper fixing of hinges with chowkhat and screws and applying a priming coat of approved steel primer. Chowkhat frame size: 100x60x5 mm. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 28 | Providing and fixing ISI marked Mild steel brown finish Double action hinge 4 inch-heavy duty closing swing door hinge for pantry including cost of material, labour etc . Complete as per instructions of Engineer-in-charge |
| 29 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete |
| 30 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete Makes : Godrej, Harrison |
| 31 | Providing and fixing abright/matt finished Stainless steel handles of approved quality & make with necessary screws etc. complete : 125 mm |
| 32 | Providing and fixing bright brass/ Stainless steel sliding door as approved, with nuts and screws etc. complete : 250x16 mm |
| 33 | Providing and fixing bright finished brass tower bolts/Stainless steel (barrel type), with necessary screws etc. complete : 250x10 mm |
| 34 | Providing and fixing bright brass/ Stainless steel hanging type floor door stopper of approved shape and design with necessary screws etc. complete to the satisfaction of engineer-in-charge |
| 35 | Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc. Complete as per direction of Engineer-in-Charge. Polyester powder coated minimum thickness 50 micron aluminium tubular handle bar |
| 36 | Providing & Fixing of Roman Blinds ( Blackout) made up of Approved cloth, Design, colour texture/ finish etc. as per Architects choice. Having weight of 250 GSM complete with all acessories/ fittings, fixing etc. as per the instructions of Engineer Incharge. |
| 37 | Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5 mm depth and 5 mm width |
| 38 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved |
| 39 | Providing and fixing partition upto ceiling height consisting of wooden batten and glass as lovers, MS frame, wood wherever required including glass, wood, battens, painting, polish, frosted glass film etc. as per manufacture's specification complete in all respect as per direction of engineer in charge. |
| 40 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Polyester powder coated aluminium minimum thickness of polyester powder coating 50 micron) |
| 41 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) |
| 42 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading inclued in rates: With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm) |
| 43 | Supply, installation, and maintenance of planters, specified as fiber, decorative earthen, or wooden, along with plants and potting mixture decorative pots, high-quality soil/manure with proper completion of work as per the direction of engineer in charge. |
| 44 | Provding, making and fixing of L- shape 04 seater sofa-01 nos. and 01seater sofa-03 nos. with wooden top handle, pine top finish polish fabricated with 40 density seat chushion of size 21\\"x22\\"and back foam of 32 density including fabric (as approved by Engineer-in-charge), making cloth, any size foam required to give required shape, nails, glue, fevicol, stepler pins,sticking of fabric, labour cost, any material as when required etc. complete in all respect. as per instructions of Engineer-in-charge. |
| 45 | Supply and install the Recliner sofa as approved by Engineer-in-charge |
| 46 | Providing, making and fixing of centre table and corner table, snacks table made up of powder coated anodize Aluminium section frame size 1.20x0.60x0.45 m. as per the design/ drawing and instructions of Engineer Incharge fabricated with Marine ply borere proof/ Resistant (for prevention from temites) conforming to Is 710 of century plywood/ Greenply/ Archid ply/ Kitply, covering up with 1 mm thck. outside Mica/ laminate and 0.8 mm thck. inside Mica/laminate of Century/ greenlam /Archid/ Surfica/Airolam, with Nails, fevicols etc complete including the hardware and fittings, Main Framing powder coated anodize Aluminium section as aprroved by Enginer-in-charge such as fabric, nails, screws, chushion of required density, glass top Handle, Telescopic hinges, Telescopic Channels, locks, magnet, profile lights, buffer etc. complete. Main Framing powder coated anodize Aluminium section frame size 1.20x0.60x0.45 m. as instructions of Architect/ Enginer in charge. This includes making cutouts in the Table, buffer, fixing of the Electrical switch/ Socket, Desk Wire Cord Cable Grommets Hole Cover for Office PC Desk Cable Cord Organizer, cable manager, any internal wiring when required etc Measurement of the Table will be taken in elevation i.e Length x Height only. |
| 47 | Providing, making and fixing of Dining table of required shape and size-03 nos. (02 seater) and 01 nos. circular shape (04 Seater) whatever required as per the design/ drawing and instructions of Engineer Incharge fabricated with Marine ply borere proof/ Resistant (for prevention from temites) conforming to Is 710 of century plywood/ Greenply/ Archid ply/ Kitply, covering up with 1 mm thck. outside Mica/ laminate and 0.8 mm thck. inside Mica/laminate of Century/ greenlam /Archid/ Surfica/Airolam, with Nails, fevicols etc complete including the hardware and fittings as aprroved by Enginer-in-charge such as Handle, Telescopic hinges, Telescopic Channels, locks, magnet, towerbolt, profile lights etc. complete. Main Framing with 19/ 18mm and rest portion with thickness as per the design/ instructions of Architect/ Enginer in charge. This includes making cutouts in the Table, buffer, fixing of the Electrical switch/ Socket, Desk Wire Cord Cable Grommets Hole Cover for Office PC Desk Cable Cord Organizer, cable manager, any internal wiring when required etc. Measurement of the Table will be taken in elevation i.e Length x Height only. |
| 48 | Providing, making and fixing of Book shelves, with shelves/drawers having glass doors and T.V unit as per the design/ drawing and instructions of Engineer Incharge fabricated with Marine ply borere proof/ Resistant (for prevention from temites) conforming to Is 710 of century plywood/ Greenply/ Archid ply/ Kitply, covering up with 1 mm thck. outside Mica/ laminate and 0.8 mm thck. inside Mica/laminate of Century/ greenlam /Archid/ Surfica/Airolam, with Nails, fevicols etc complete including the hardware and fittings as aprroved by Enginer-in-charge such as Handle, Telescopic hinges, Telescopic Channels, locks, magnet, towerbolt, profile lights etc. complete. Main Framing with 19/ 18mm and rest portion with thickness as per the design/ instructions of Architect/ Enginer in charge. This includes fixing of the profile lights, Electrical wiring etc. Book shelf measurements will be taken in elevation i.e Length x Height only. |
| 49 | Providing and fixing Picture frame of required shize and shape at wall as appproved by Engineer-in-charge |
| 50 | Faculty lounge carpet of required size to be placed below center table as approved by Engineer-in-charge |
| 51 | P/F of translucent / Frosted/ Opaque dark film as approved (Glass ware make or equivalent) on glass/ventilators/window etc. complete in design/pattern as per the suggested design including cutting for strips etc. However, the measurement for such strips cut out will also be taken all work completed to the satisfaction of Engineer-in charge. |
| 52 | Providing and fixing 6 mm WPC board ith necessary screws/nuts & bolts/nails / suitable fasteners and fixtures along with suitable adhesive, and fixed on wall, so as to adhere on wall complete as per direction of Engineer-incharge. |
| 53 | Cutting and preperation of eye view in flush door by making cut out of desired shape and size, fixing side beadings as per the approved design for glass fixing, P/F of glass 5 mm thick and fixing od frosted, transluent film (as approved) on glass. including polishing / painting of beading etc. linear measurement of area of size of eye view opening provided will be measured. |
| 54 | Visitor Chair, Wooden Arm, Chrome Plated Pipe Stand, Leatherette Tapestry Powder Coated Make GEEKEN as aprroved by Engineer in charge |
| 55 | Dining table chairs as per required design as approved by Engineer-in-charge |
| 56 | Civil and interior Work for MDP toilet |
| 57 | Dismantling doors, windows and clerestory windows (steel or wood or aluinium ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below |
| 58 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm. |
| 59 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge In cement mortar |
| 60 | Dismantling stone slab flooring/ kitchen platform/ wash basin platform and urinal partitions laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. |
| 61 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 62 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 63 | Dismantling Wash Basin of all sizes including properly stacking them, sorting out he reusable ones and depositing the reusable and disposing off the unusable ones either to the desired loaction or outside the campus as instucted by the Engineer incharge. |
| 64 | Dismantling Urinal of all sizes and Types including properly stacking them, sorting out he reusable ones and depositing the reusable and disposing off the unusable ones either to the desired loaction or outside the campus as instucted by the Engineer incharge. |
| 65 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba etc. to the desired location or outside the site all complete as per directions of Engineer-in Charge. |
| 66 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (including equivalent design mix) |
| 67 | Dismantling G.I./ C.I. pipes (external and concealed work), manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge :15 mm to 40 mm nominal bore. |
| 68 | Earth work in excavation / digging out the earth/ cinder etc. from the ground/ floors of the toilets, pantry, water cooler etc including getting out and disposal/ stacking of excavated earth/ cinder fillingetc lead upto 50 m and for all lift, as directed by Engineer-in-charge.All kinds of soil |
| 69 | Dismantling/ removing the door fittings, Repairing the door ( If Required) with available dismantled door/Door board pieces/ Board and Refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, fittings etc. as required, all complete as per the direction of the Engineer-in-charge. Laminate and new fittings fixed will be paid saperately. |
| 70 | Dismantling, sorting out the reusable material, storing and depositing the C.P Bras fittings and fixtures, Bathrom fittings, Grab bar, lights, fittings etc. . Complete to the satifaction of Engineer Incharge Grab bar fixed to be checked with applicable load. Rates per Toilet set ( i.e complete gents/ ladies toilet set which can have one or more W.C, Basin, urnials etc. will be counted as1 lot) |
| 71 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 72 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. |
| 73 | Providing and laying 75 mm thick compacted bed of dry brick aggregate of 40 mm thick nominal size including spreading, well ramming, consolidating and grouting with jamuna sand, including finishing smooth etc. complete as per direction of Engineer-in-charge. |
| 74 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) |
| 75 | Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry. |
| 76 | Deduct for old brick the rates are per 1000 Nos. bricks. |
| 77 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal size) |
| 78 | 12 mm cement plaster of mix :1:4 (1 cement: 4 coarse sand) |
| 79 | Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect. SBR Polymer (@10% of cement weight) modified cementitious bond coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer |
| 80 | Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers. |
| 81 | Providing and laying Vitrified/ full body vitrified/ glazed vitrifried// Double Glazed tiles ( as per the tiles approved) in floor with different sizes (thickness to be specified by the manufacturer), with water absorption as per the category of tile selected and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade,of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile upto 600x600 mm as Approved |
| 82 | Providing and laying body vitrified/glazed vitrified/double glazed tiles ( as per the tiles approved )tiles on the Wall in different sizes (thickness to be specified by the manufacturer), with water absorption as per the category of tile selected and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in dado/ wall, skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete).Size of Tile upto 600x600 mm as Approved |
| 83 | Deduct for not grouting the joints with white cement and matching pigment in the items of fixing of vitrified tiles. |
| 84 | Grouting the joints of flooring/ wall tiles/ Basin Counters, spouts/ floor Traps etc. having joints of 3 mm width or more/ on the cornner junctions/ in the traps/ at he junction of counter to and wall, counter top and basin etc., using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling /grouting and finishing complete as per direction of Engineer-in-charge.Only the area for which such type of grouting is done shall be measured. ( Eg. if only the edges of wall and floor junctyion are done then length of th edge multiplied by 0.3 will be done) Size of Tile 300x300/300x450/600x600mm or 600 x2400or 600 x1200 or as selected/ Approved. |
| 85 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 86 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 87 | Centering and shuttering including strutting, propping etc. and removal of form for : Shelves (Cast in situ) |
| 88 | Ditto item above for Edges of slabs and breaks in floors and walls Under 20 cm wide. |
| 89 | Making Hole in Stone Slab and R.C.C. Slab of washbasin counter for counter top wash basin drainage, water supply taps etc. complete to the satisfaction of engineer incharge |
| 90 | Providing and laying Vitrified tiles in Washbasin Counter etc. in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to 1S:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.Full Body/Glazed/Double Glazed/ double Charged/ Single Charged etc. in Glossy/ polished/Matt/Antiskid finish ( As Approved by the user/ Architect/ Engineer Incharge) of size to as per the size of basin Counter Whcih can be Approx. upto 600mm x2400mm. Complete one piece with width as per site and Length upto 2400 mm has to be supplied and fixed. In case the size of slab is higher then the maximum size of tile avalable then the tiles to be provided as per the design given by the Architect. Any wastage etc. beacuse of size of tile supplied and actual cut piece fixed is asumend to have been considered in rates. So the Area of the work completed only will be measured. |
| 91 | Providing, Fabricating and fixing PVC Vanity/ Cup Board fabricated with WPC/Foam PVC Board 19/ 18 mm Thick having minimum density 0.50 gm/Cum , Fixed with the required adhesive, screws, fissures etc. complete including the piano hinges, Buffer, Brackets, magnetic catcher any other hardware etc. to complete the cup board/ vannity including the providing and fixing of edge bendiing tape with suitable adhsive for wet area . The area of board used will be measured. Complete to the satisfaction of Engineer incharge. Payment of Mica/ Laminate will be made seperately as per different item in this BOQ. |
| 92 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede/ glossy finish ( design and finish as Approved) with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive etc. of Approved make . 1.0 mm thick. Including the cost of cutting/ making good the cutout for eyeview etc. Including making of the grooves etc. as per the design. Deduction for cutout above 0.3 sqm shall be made in measurement. For vanity above. Laminate inside and outside will be pasted with fevicol marine/ Suitable adheive for wet area. |
| 93 | Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete Double strip (horizontal type) |
| 94 | Providing and fixing 50 mm bright finished brass cup board or wardrobe knob of approved quality with necessary screws. |
| 95 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion: Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 96 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . Cost of aluminium snap beading is included in this rate: With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm) |
| 97 | Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5 mm depth and 5 mm width |
| 98 | Supply and fixing of Acp/ Ply as per the site requirement for fixing of the Exhaust fan on ventilator if the Ventilator opening is not of the suitable size. 4mm thick |
| 99 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 100 | Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters including the polishing/ painting of exposed edges proper as per the requirement (over all area of door shutter to be measured). |
| 101 | Cutting and Preperation of Eye view in flush door by making the cutout of desired shape and size, fixing side beadings/ taj beadins as per the Approved design for glass fixing, p&f of Glass 5 mm thich (min.) and fixing of Frosted, transluent film ( As Approved ) on glass. Including the polishing/ painting of beading etc. Linear measurement of area of Size of EYE view opening provided will be measured. |
| 102 | Providing and fixing PVC rigid foam sheet 1 mm thick on existing door shutters (bathroom and W.C. doors) using synthetic rubber based adhesive. |
| 103 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede/ glossy finish ( design and finish as Approved) with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive etc. of Approved make . 1.0 mm thick. Including the cost of cutting/ making good the cutout for eyeview etc. Including making of the grooves etc. as per the design. Deduction for cutout above 0.3 sqm shall be made in measurement. For Doors etc. |
| 104 | Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including welding of additional MS plate of required thickness to withstand the door weight fixed one double action hinges and proper fixing of hinges with chowkhat and screws and applying a priming coat of approved steel primer. Chowkhat frame size: 100x60x5 mm. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 105 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 106 | Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 125x64x1.90 mm |
| 107 | Providing and fixing bright finished brass tower bolts/ Stainless Steel (barrel type) with necessary screws etc. complete : 250x10 mm |
| 108 | Providing and fixing bright finished brass tower bolts/ Stainless Steel (barrel type) with necessary screws etc. complete : 150x10 mm |
| 109 | Providing and fixing chromium plated brass/ Stainless steel 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. |
| 110 | Providing and fixing bright finished brass door latch with necessary screws etc. complete : 300x16x5 mm |
| 111 | Providing and fixing bright finished brass/ Stainless Steel hanging type floor door stopper of Approved shape and design with necessary screws, etc. complete to the satisfation of engineer Incharge. |
| 112 | P&F of Stainless Steel Safety Door Stopper Floor Mount Half Dome Door Stopper, Door Stop Bumper Wall Protector with Rubber Bumper with Screw and Wall Plugs (2)incuding asociated works etc. complete of approved design and satisfactio of user/ engineer Incharge |
| 113 | Providing and fixing of C.P. brass/ Stainless steel Cloth Hanging Hook ( Two hooks in one set) Shape and design as APPROVED. |
| 114 | Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete.125 mm |
| 115 | Dismantling,storing/ stacking and refixing of grab bar with required fastner/ screw upto 75 mm length with epoxy filled inside the holes. Complete to the satifaction of Engineer Incharge Grab bar fixed to be checked with applicable load. |
| 116 | Providing and fixing of New Grab Bar as per the desired specification/ design complete with required fastner/ screw upto 75 mm length with epoxy filled inside the holes. Complete to the satifaction of Engineer Incharge Grab bar fixed to be checked with applicable load. |
| 117 | P& F of min. 5 mm thick looking mirror of ht. upto1 mtr and length upto length of basin counter) with/ without frame, fixing with the required no. of studs, If required suitable back support of water proof board may also be fixed. Wastage in Cutting etc. is included in the rates, Fixing of the mirror to be done with proper suction cups etc. and finaly cleaning and polishing ( if requird) work complete job. Edges of the Mirror should be apparopriately sealed to prevent corrosion of the mirror incuding asociated works etc. complete of approved design and satisfactio of user/ engineer Incharge |
| 118 | Providing and fixing of Health Faucet incuding asociated works etc. complete of approved design and satisfaction of user/ engineer Incharge |
| 119 | Supply and fixing of SS towel rod of size 600 mm long complete of approved design and satisfaction of user/ engineer Incharge |
| 120 | Providing and fixing of Toilet Paper Roll holder including asociated works etc. complete of approved design and satisfaction of user/ engineer Incharge |
| 121 | Providing and fixing Soap Dispenser incuding asociated works etc. complete of approved design and satisfaction of user/ engineer Incharge |
| 122 | Providing and fixing SS 304 Anticockroach Trap ( with cockroach Trap) 5\\"/ 4\\"/3' size incuding asociated works etc. complete of approved design and satisfactio of user/ engineer Incharge |
| 123 | Providing and fixing of Paper towel Dispenser incuding asociated works etc. complete of approved design and satisfaction of user/ engineer Incharge |
| 124 | P& F of toughened glass urnial partition with standard fittment of branded quality as approved by E-in-C. incuding asociated works etc. complete to satisfactio of user/ engineer Incharge |
| 125 | Providing and fixing of Translucent/ frosted film ( Garware make or equivalent) on Glass of ventilators/ windows etc. complete in design/ pattern as per the suggested design including the cuttings for strips etc. Howere the measurement for such strips cut out will also be taken. all work completed to the satisfaction of enginer incharge |
| 126 | Extra for providing opening of required size & shape for counter sunk wash basin/kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. |
| 127 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm ( or the size and shape Approved) with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste coupling (as Approved/ as per manurafturer), other waste fitting as per IS : 2556, trap (material as approved/ as per OEM) with outlet grating and other couplings in C.P. brass, including painting of fittings, fastner/ fissures/ rawl plug etc. and cutting and making good the walls and floors wherever required, including grouting whereever required, including fixing of the Bottle trap/ drain pipe with urinal, rubber gasket, silicon etc.whatever required so as to complete the work. payment for bottle trap/ drain pipe will be made seperately. Basic price of urinal with spreader and coupling considered arround Rs 6488/- ( Excluding GST) per set. |
| 128 | Providing and fixing floor mounted, white vitreous china single piece,vortex rimless, double traps, flush syphonic, water closet with soft close premium seat cover of approved brand/make, shape, size and pattern including integrated one piece white vitreous china cistern of capacity 10 litres or as provided by the manufacturer in selected model with dual flushing system, including all fittings and fixtures with premium soft close seat cover, cistern fittings, nuts, bolts and gasket, silicon etc including making connection with the existing P/S trap, grouting etc. proper leakage free complete in all respect as per directions of Engineer-in-Charge. Basic price of complete set of European water closer considered arround Rs 13200.19 ( excluding GST) per set. |
| 129 | Providing and fixing countertop white vitreous china wash basin with waste coupling as approved including making all connections, drainage, but excluding the cost of Taps etc.including fixing, fitting, grouting sealing the joint etc. conmplete to rpoperly fix the basin as per the desired finish and satisfaction of user. Basic price of basin and coupling considered arround Rs 4905.93/ ( excluding GST) per set. |
| 130 | Cutting chases in brick masonry walls for following diameter sand cast iron/centrifugally cast (spun) iron/ PVC pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size), including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand) : Diameter 32/ 40mm upto 100 mm. |
| 131 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints, Bends, Tee, Sockets, Couplings, Any other fittings etc. complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. |
| 132 | 15 mm nominal outer dia Pipes metre |
| 133 | 20 mm nominal outer dia pipe |
| 134 | 25 mm nominal outer dia Pipes. |
| 135 | 32 mm nominal outer dia Pipes |
| 136 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints, bends, Tee, Socket, copuling etc complete as per direction of Engineer in Charge: 40 mm nominal outer dia Pipes. |
| 137 | Providing, Laying and fixing Unplasticized poly vinyl chloride (PVC-U) pipes for soil and wastage discharge system sewerage and Drainage pipe Type 'B\\" Conforming to I.S. 13592.75 mm/ 110 mm dia pipe incuding asociated works etc. This also includes elbow, bends, Tee, door Tee, Door Bend, Y joining solution etc. whatsoever fittings required to complete eh work. complete of approved design and satisfactio of user/ engineer Incharge Including interconnection of the C.I. / PVC G.T./ traps and pipese etc. with Adjoing C.I./ PVC Pipes. Including water proofing treatement of the joints et.c so that the complete unit is leakage free 75 mm Diameter Pipe |
| 138 | ditto item above for 110 mm dia. incuding asociated works etc. complete of approved design and satisfaction of user/ engineer Incharge |
| 139 | Providing and fixing brass fitted MTA ( Male Thread Adaptor)/ FTA ( Female Thread Adaptor) of the required diameter upto 32 mm as per the requirement for joining the G.I. Line with CPVC lines complete leakage free. THe Threads to be brass, including any work required in G.I. pipe for properly fixing the pipes.. |
| 140 | P/f of P or S/ floor/ multi trap/ Nahni Trap made of UPVC of 4\\", 3\\" size Type 'B\\". Conforming to suitable I.S. code applicable. incuding asociated works etc. incuding asociated works etc. complete of approved design and satisfactio of user/ engineer Incharge Including interconnection of the C.I. / PVC trap with Adjoing C.I./ PVC Including water proofing treatement of the joints et.c so that the complete unit is leakage free |
| 141 | New Work of Providing and fixing square-mouth U.P.V.C. gully trap ( as per Approved quality) complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.5 kg as per standard design: size and shape as per the requirement With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 each Including interconnection of the C.I. / PVC G.T. with Adjoing C.I./ PVC Pipes. Including water proofing treatement of the joints et.c so that the complete unit is leakage free |
| 142 | Supply and fixing of wall paper complete of approved design and satisfaction of user/ engineer Incharge. Wall having DB |
| 143 | Providing and fixing of Concealed Pressmatic Taps Urinal Valve Auto Closing System Chrome plated 7 with Built-in Control Cock & Wall Flange etc. including its connection with the urinal etc. complete to the satisfaction of Engineer Incharge. |
| 144 | Providing and fixing CP Brass/ PVC of heavy quality as per the model/ make Approved by the engineer in Charge. 32mm/ as per the basin/ urinal size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. |
| 145 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :40 mm/32 mm nominal bore or above . Including MTA etc. if required |
| 146 | P& F of C.P. Brass two way bib cock of approved quality. incuding asociated works etc. complete of approved design and satisfactio of user/ engineer Incharge |
| 147 | P& F of C.P. Brass longbody pressmatic auto close basin tap counter mount type of approved brand and quality.incuding asociated works etc. complete of approved design and satisfaction of user/ engineer Incharge |
| 148 | P&F of C.P. Brass Concealed Stop cock (premium quality as approved) incuding asociated works etc. complete of approved design and satisfactio of user/ engineer Incharge |
| 149 | Providing and fixing chrome plated brass ( CP brass) Angle Valve incuding asociated works etc.incuding asociated works etc. complete of approved design and satisfaction of user/ engineer Incharge |
| 150 | P/F of PVC waste pipe for sink and washbasin including PVC waste fittings complete. Flexible pipe 32 mm |
| 151 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm. |
| 152 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 153 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two coats |
| 154 | Electrical Works for MDP Lounge and Toilet Work |
| 155 | Supplying and fixing 12 Module (200 x 150 mm) GI box along with modular base and cover plate for modular switches, in recess etc. as required. |
| 156 | 8 Module (125 x 125 mm). |
| 157 | 6 Module (200 x 75 mm). |
| 158 | 4 Module (125 x 75 mm). |
| 159 | 1 or 2 Module (75 x 75 mm). |
| 160 | Supplying and fixing modular switch 5/6 A on the existing modular plate and switch box including connections but excluding modular plate etc. as required. |
| 161 | 3 pin 5/6 A socket outlet. |
| 162 | 15/16 A switch. |
| 163 | 6 pin 15/16 A socket outlet. |
| 164 | Bell push. |
| 165 | Supplying and fixing modular blanking plate on the existing modular plate and switch box excluding modular plate as required. |
| 166 | Wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point - Group B. |
| 167 | Wiring for group controlled (looped) light point / fan point / exhaust fan point / call bell point (without independent switch) with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface / recessed PVC conduit, and earthing the point - Group B. |
| 168 | Group C (wiring run over 6 m and up to 10 m). |
| 169 | Wiring for circuit / submain wiring along with earth wire, 2 x 1.5 sq.mm + 1 x 1.5 sq.mm earth wire, FRLS/HFFR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit as required. |
| 170 | 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earth wire. |
| 171 | Supplying and fixing 20 amps, 240 volts, SPN, industrial type socket outlet, with 2 poles and earth, metal enclosed plug top, along with 20 A 'C' curve SP MCB in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, complete with connections, testing and commissioning etc. as required. |
| 172 | Wiring for circuit / submain wiring along with earth wire, 2 x 4 sq.mm + 1 x 4 sq.mm earth wire, FRLS/HFFR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit as required. |
| 173 | Supplying and fixing 4 Module (125 x 75 mm) GI box along with modular base and cover plate for modular switches, in recess etc. as required. |
| 174 | Supplying and fixing modular 6 pin 15/16 A socket outlet on the existing modular plate and switch box including connections but excluding modular plate etc. as required. |
| 175 | 15/16 A switch. |
| 176 | 3 pin 5/6 A socket outlet. |
| 177 | 5/6 A switch. |
| 178 | Wiring for light / power plug with 2 x 4 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit along with 1 No. 4 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable for loop earthing as required. |
| 179 | Supplying and fixing 25 mm medium class PVC conduit along with accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 180 | Supplying, installation, testing and commissioning of LED recessed / surface down lighter (round / square / rectangular), SMD type, 12 to 15 watt, system lumen efficacy 120 to 135 lm/W, PMMA and prismatic diffuser, as per IS 10322, driver efficiency above 85%, 140-270 V AC, IP20, CRI above 80, UGR below 19, flicker free, L70 50,000 hours, complete with driver, connections and earthing. |
| 181 | Supplying, installation, testing and commissioning of LED surface mounted batten light, 18 to 22 watt, system lumen efficacy 120 to 135 lm/W, pressure die-cast aluminium body, as per IS 10322, complete with driver and accessories. |
| 182 | Supplying, installation, testing and commissioning of ceiling fan with BLDC motor, 1200 mm sweep, service value not less than 6.0 CM/Min/Watt, air delivery 210 CM/Min minimum, class B insulation, 3 aluminium alloy blades, 30 cm down rod, PF not less than 0.9, THD below 10%, 350 RPM, WITH REMOTE for speed control, compliant to IS 374:2019, complete with connections and earthing. |
| 183 | Installation, testing and commissioning of exhaust fan in the existing opening, including making good the damage, connection, testing and commissioning etc. as required - up to 450 mm sweep. |
| 184 | Supplying and fixing 40 A rating, double pole (single phase and neutral), 240 V, residual current circuit breaker (RCCB) having a sensitivity current of 30 mA, in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 185 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, 'C' curve MCB suitable for inductive load - single pole - in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 186 | Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. |
| 187 | Wiring for circuit / submain wiring along with earth wire, 4 x 6 sq.mm + 2 x 6 sq.mm earth wire, FRLS/HFFR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit as required. |
| 188 | Providing and fixing 25 mm x 5 mm G.I. strip on surface or in recess for connections etc. as required. |
| 189 | Supply and fixing of LED profile / cove light fitting for false ceiling, extruded aluminium housing with opal polycarbonate diffuser, 12 to 14 watt per metre, 3000 K, complete with driver, end caps, connectors and fixing accessories. |
| 190 | P/F of high speed hand drier of approved make like Dolphy, Dyson, Euronics, Jaquar, Askon or equivalent or as approved by Engineer-in-charge |
| 191 | Supply and fixing of 55 inch OLED TV of approved brands like Song, LG, Samsung or equivalvent as approved by Engineer-in-charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysSep 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender