Petroleum and Natural Gas Boards / Undertakings / PSU Closing in 5 days TDR #57447109

Tender For Instrumentation Works For Propylene Recovery Section (Pru) For Epcm1 At Nrep

Issued by Boards / Undertakings / PSU · Golaghat, Assam
Tender Value
Ref. Documents
Estimated cost
Bid Submission
16 Sep 2026
5 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Organization
Click here to view tendering authority
Tender ID
Click here to view tender id
Competition Type
NCB
Bidding Type
Tender
Location / State
Golaghat → Assam
EMD Exemption
Not Available
Quantity
Not Available
Website
Click here to view website
Contact Person
Click here to view contact person
Address
Click here to view address

Project Description

Tender for Instrumentation Works For Propylene Recovery Section (Pru) For Epcm1 At Nrep

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 11-Sep-2026 Addendum_01 Other 16-Sep-2026

BOQ

Name of Work:- INSTRUMENTATION WORKS FOR PROPYLENE RECOVERY SECTION (PRU) FOR EPCM1 AT NREP
Sl. No. Item Description
1Supply of following items Supply charges including charges for transportation, unloading at site, MTC, fasteners, accessories, material inspection at Vendor work shop including TPI charges , MOC as per Modulating & ON/OFF Control and Isolation Valves-TP-1ZZZA-IC-SPE-0011 & TP-1ZZZA-IC-SPE-0012; For Hooter, Beacon & FireDetectors refer Specification-TP-1ZZZA-IC-SPE-0024_D1.
2Hand SWITCH STOP, RESET
3INSTRUMENT AIR MANIFOLDS- SUPPLY
4Supply charges including handling, transportation to the installation location, hardware/fasteners, accessories installation, pneumatic testing, cleaning/flushing, require consumables, tools & tackles, manpower, etc. all complete as per specification all complete as per specification TP-1ZZZA-IC-SPE-0033_D1 Specification for Instrument Installation . and direction of Engineer-in-Charge.
510 WAY
6TUBE AND TUBE FITTING- SUPPLY
7Supply charges including handling, TPI charges, transportation to the working location, fabrication, accessories installation (fittings, valves manifold, etc.), tools & tackles, manpower, scaffolding , Hydro/Pneumatic testing, dressing, clamping, tagging, etc. all complete as per specification TP-1ZZZA-IC-SPE-0033_D1 Specification for Instrument Installation
8SS316 TUBE SIZE
912mm OD x 1.65mm WT, Seamless, SS316
1010mm OD Copper Tube
11FITTINGS- SS316
12MALE CONNECTORS- SS316 (1/2\\" NPTM x 12mm OD)
13FEMALE CONNECTOR- SS316 (1/2\\" NPTF x 12mm OD)
14UNION TEE 12mm OD x 12mm OD x 12mm OD)
15TUBE UNION (12mm OD x 12mm OD)
16TUBE CAP (12mm OD)
17NEEDLE VALVE
18END BLIND CAP (NPT MALE)
19ADAPTOR/REDUCER
20GATE VALVE (1/2\\" NPTF x 1/2\\" NPTF)
21CONDENSATE POT-SS316 (3\\" Pot with, 1/2\\"NPT) IBR
22MALE CONNECTORS- SS316 (1/4\\" NPTM x 12mm OD)
23FEMALE CONNECTOR- SS316 (1/4\\" NPTF x 12mm OD)
24END BLIND CAP ( 12mm OD) FOR TUBE
252 VALVE MANIFOLD SS316 (1/2\\"NPTFx1/2\\"NPTF)
262 VALVE MANIFOLD SS316 (1/2\\"NPTFx1/2\\"NPTM)
27CONDENSATE POT-SS316 (3\\" Pot with, 3/4\\"NPT)
28FIBER OPTICAL; ARMOURED /UNARMOURED
29Scope includes preparation of all fibres and splicing / patching ,Supply of adequate consumables for the execution of the work (such as fibre optic connectors suitable for the application), testing, tools & tackles, manpower, scaffolding etc. all complete as per specification REFER AS TP-1ZZZA-IC-SPE-0033_D1 Specification for Instrument Installation and direction of Engineer-in-Charge.
30FIBER-OPTIC CABLES- Single Mode , 6 Fibre
31FIRE PROOFING FOR CABLE DUCT,TRAY,ANGLE TRAY,ETC.- SUPPLY
32Supply charges including TPI charges, transportation to working location, installation of Mattresses, Cladding, SS Clamps, all fittings, accessories, tools & tackles, manpower, scaffolding etc. all complete as per tkUIPL-INDIA specificationand direction of Engineer-in-Charge.REFER AS TP-1ZZZA-IC-SPE-0033_D1 Specification for Instrument Installation
33PERFORATED TRAY WITH COVERS ANODISED ALUMINIUM
34WIDTH 300 MM
35CONDUITS :
36RIGID HDPE CONDUITS : HDPE conduit shall be as per IS-4984 or as per equivalent IEC code. The outer sheath colour of HDPE conduits shall be orange with black for the fittings throughout the fibre optic cable run.Installation charges including transportation from tkUIPL /Client material store to working location, fabrication like (making threads, bends, etc.), require hardware’s/fasteners (U clamps etc.), clamping/supporting, accessories installation(fittings), consumables, tools & tackles, manpower, scaffolding etc. all complete as per tkUIPL -INDIA specification-REFER AS TP-1ZZZA-IC-SPE-0033_D1 Specification for Instrument Installation and direction of Engineer-in-Charge.
3725 mm nominal dia
3850 mm nominal dia
39FLEXIBLE CONDUITS (SS304): Supply and Installation charges including TPI charges, transportation to working location, fabrication like (making threads, bends, etc.), require hardware’s/fasteners (U clamps etc.), clamping/supporting, accessories installation(fittings), consumables, tools & tackles, manpower, scaffolding etc. all complete as per tkUIPL -INDIA specification REFER AS TP-1ZZZA-IC-SPE-0033_D1 Specification for Instrument Installation and direction of Engineer-in-Charge.
4025 mm nominal dia conduit
4150 mm nominal dia conduit
42CANOPY /SUNSHADE FRP - SUPPLY
43Supply charges including TPI charges ,transportation to working location, supporting wherever require for instruments, JBs , etc. (like integrated inline instruments, close couple mounted instruments, etc.), hardware's/fasteners, consumables etc. Fabrication, installation, tools & tackles, manpower, scaffolding etc. all complete as per tkUIPL -INDIA specification and direction of Engineer-in-Charge.TP-1ZZZA-IC-BOD-0001_D3 Engineering Design Basis for Instrumentation
44PREFABRICATED. CANOPIES
45SINGLE TRANSMITTER INCLUDING TEMP ELEMENT & GAS/ FIRE DETECTOR
46TWO TRANSMITTERS/INSTRUMENTS
47SINGLE JUNCTION BOXES
48THREE JUNCTION BOXES
49FOUR JUNCTION BOXES
50HAND SWITCH/PUSH BUTTON
51Multiple transmitters/instruments
52Two Junction boxes
53Six Junction boxes
54Eight Junction boxes
55Five Junction boxes
56SEVEN JUNCTION BOX
57STANCHIONS FOR INSTRUMENTS - SUPPLY
58Supply charges including TPI charges, transportation to working location, brication, surface cleaning, painting, suitable clamps with pipe line (for close couple hook-ups etc.), hardware's/fasteners, grouting, clamps, consumables, tools & tackles, manpower, scaffolding etc. all complete as per tkUIPL -INDIA specification-REFER AS PER DOCUMENT INSTRUMENT INSTALLATION SKETCHES and direction of Engineer-in-Charge.REFER AS PER DOCUMENT TP-1ZZZA-IC-STD-0001 INSTRUMENT INSTALLATION SKETCHES
59FLOOR MOUNTING
60STEEL COLUMN MOUNTING
61PLATFORM MOUNTING
62OUTSIDE HAINDRAIL
63MULTIPLE TX ON PLATFORM MOUNTING
64STRUCTURAL STEEL
65Supply charges including TPI charges, transportation , fabrication, installation, surface cleaning, painting , consumables, tools & tackles, manpower, etc. all complete as per tkUIPL -INDIA specification.and direction of Engineer-in-Charge.
66STRUCTURAL STEEL
67NUT & BOLTS WITH WASHERS, M10x35mm, SS
68NUT & BOLTS WITH WASHERS, M12x50mm, SS
69ANCHOR FASTNER, M10x80mm, MS (CADMIUM)
70BEAM CLAMP WITH SS BOLT & NUT , HEIGHT 40mm, MS/SS
71PIPE CLASS B,IS=1239 PART-1 , 2\\", MS(PAINTED)
72COVER PLATE FOR 2\\"PIPE , 6THK., MS(PAINTED)
73RIBS (STIFFNERS), 250x60x40 (10THK.), MS
74TYPE \\"J\\" HOOK BOLT & NUT , M10x100mm, MS
75BASE PLATE, 250x250x10THK., MS
76BASE PLATE, 200x200x10THK., MS
77ANCHOR FASTNER, M10x100mm, MS HD.GALVANISED
78ANCHOR FASTNER, M12x100mm, MS (CADMIUM)
79STRUT CHANNEL (1-5/8\\") MS GALVANISED, 12gauge
80MS GI ROD THREADED (1/2\\")
81SQUARE WASHER (1/2\\") ZINC PLATED (on MS), suitable for 1/2\\" bolt (3mm)
82FIELD INSTRUMENT INSTALLATION
83Installation charges including handling, shifting from site-store / yard to the installation location, required hardware/fasteners, consumables, tagging, tools & tackles,scaffolding , manpower etc. all complete as per specification and direction of Engineer-in-Charge INCLUDING INSTALLATION OF EXTERNAL SURGE PROTECTOR
84MASS FLOWMETERS (REMOTE MOUNTED TRNASMITTERS ONLY)
85DP TYPE FLOW TRANSMITTERS
86GAUGE PRESSURE TRANSMITTERS
87PRESSURE TRANSMITTER REMOTE SEAL PAN CAKE TYPE WITH FLUSHING RING
88DP TRANSMITTER REMOTE SEAL PAN CAKE TYPE WITH FLUSHING RING (HP+LP)
89DIFFERENTIAL PRESSURE TRANSMITTER
90DISPLACER LEVEL TRANSMITTER
91TEMPERATURE TX SEPARATELY MOUNTED
92LOOP POWER LOCAL INDICATORS
93MAGNETIC TYPE LEVEL GAUGE
94PRESSURE GUAGES SCREW CONNECTION
95PRESSURE GUAGES REMOTE SEAL PAN CAKE TYPE WITH FLUSHING RING
96DIFFERENTIAL PRESUSRE GAUGE WITH MANIOLD
97RESISTANCE TEMPERATURE DETECTORS WITH THEMOWELL
98THERMOCOPLES WITH THEMOWELL
99TEMPERATURE GAUGES WITH THERMOWELLS RIGID STEM TYPE
100TUNING FORK LEVEL SWITCH
101ANNUBARS/PITOT TUBEs (DP TYPE FLOW METER)
102GAS DETECTORS
103Installation charges including handling, shifting from site-store / yard to the installation location, installation of , calibration cylinders, accessories, glanding ,consumables, fasteners, tools & tackles, manpower,scaffolding etc. all complete as per specification and direction of Engineer-in-Charge.
104BEACON
105HOOTER
106LEL DETECTOR
107FIRE / FLAME DETECTOR
108TOXIC GAS DETECTOR
109OPEN PATH DETECTOR
110ANALYSERS
111Installation charges including handling, shifting from site-store / yard to the installation location, installation of sampling system, probes, calibration cylinders, accessories, heat tracing, insulated tube, glanding ,consumables, fasteners, tools & tackles, manpower,scaffolding etc. all complete as per specification and direction of Engineer-in-Charge.
112MOISTURE ANALYSER CABINET
113SAMPLE TUBE
114ETHANE ANALYSER
115BUTANE ANALYSER
116PROPENE ANALYSER
117PROPYLENE ANALYSER
118Installation of following items Installation charges including charges for transportation, unloading at site, MTC, fasteners, accessories, material inspection at Vendor work shop including TPI charges , MOC as per Modulating & ON/OFF Control and Isolation Valves TP-1ZZZA-IC-SPE-0011 & TP-1ZZZA-IC-SPE-0012; For Hooter, Beacon & Fire Detectors refer Specification-TP-1ZZZA-IC-SPE-0024_D1.
119SOLENOID VALVES
120AIR FILTER REGULATORS
121BEACON & HOOTER
122TERMINAL BLOCKS
123DIN RAIL
124Hand SWITCH STOP, RESET
125Light Interface Unit with Patch Chord - 6 port
1268-Port ethernet switch
127RS-485 to MODBUS TCPIP converter- Industrial Grade of reputed make
128Ethernet to FO converter - industrial grade of reputed make
129FIRE PROOF JACKET FOR ACTUATORS OF VALVES > 20\\"
130FIRE PROOF JACKET FOR ACTUATORS OF VALVES 10\\" to 20\\"
131FIRE PROOF JACKET FOR ACTUATORS and VALVE BODY <10\\"
132FIRE PROOF JACKET FOR VALVE BODY 1\\" to 8\\"
133LCP/DCS/PLC CABINETS/ANALYSER SHELTERS/MONITORS/PRINTORS/FURNITURES
134Installation charges including handling, shifting from site-store / yard to the installation location, erection, alignment, required hardware’s/fasteners, plugging of spare entries, tools & tackles, manpower, lifting equipment's ,trolley,scaffolding etc.MOC of hardware's shall as per tkUIPL -India specification ). All complete as per specification and direction of Engineer-in-Charge.
135LCP/DCS/PLC CABINETS/MONITORS/PRINTORS/FURNITURES
136PANEL: 1200W X 800D X 2100H
137PANEL: 1600W X 800D X 2100H
138PANEL: 800W X 800D X 2100H
139LCP:1200 W X 800 D x 2100 H (1P25-KA-3181)
140LCP:1200 W X 1000 D x 2110 H (1P25-BL-8281)
141ANALYSER PC-1
142JUNCTION BOXES - INSTALLATION
143Installation charges including handling, TPI charges, transportation to the installation location, required hardware’s/fasteners, plugging of spare entries, Tagging, box-up, suitable greasing for screws/L key screws, tools & tackles, manpower,scaffolding etc. (MOC of hardware's shall as per tkUIPL -India specification and direction of Engineer-in-Charge.
144WEATHERPROOF JUNCTION BOXES
14530 Terminals
146EX-ROOF/FLAME PROOF JUNCTION BOXES
14720 Terminals
14812 Terminals
14906 Terminals
15040/50 Terminals
151EX-PROOF/FLAME PROOF/WEATHER PROOF HAND SWITCHES/PUSH BOTTON - SUPPLY AND INSTALLATION
152PUSH BUTTON STATION / CONTROL / LOCAL PANELS
153EMERGENCY STOP
154VIBRATION RESET/ON-OFF VALVES RESET PB STATION
155BEACON TEST AND RESET PB STATION
156SUPERVISION OF INLINE INSTRUMENTS
157Suppervision,of Inline instrument by Mechanical Cpntractor, all complete as per specification and direction of Engineer-in-Charge INCLUDING INSTALLATION OF EXTERNAL SURGE PROTECTOR
158INLINE INSTRUMENT
159CONTROL VALVE
160CORIOLIS MASS FLOWMETER
161ON-OFF VALVE
162ANNUBARS/PITOT TUBEs (DP TYPE FLOW METER)
163Self Actuated Pressure Control Valve
164VENTURI
165MOV ON-OF VALVE (GATE)
166MOV ON-OF VALVE (BUTTERFLY)
167HOOK-UPS (MANIFOLDS)-CS/SS
168Installation charges including handling, shifting from site-store / yard to the installation location,INSTALLATION OF TRANSMITTER, Co-ordination with MQ contractor for welding to piping, consumables, tools & tackles, manpower, scaffolding etc. all complete as per specification and direction of Engineer-in-Charge. REFER PRE-FABRICATION HOOK-UP SPECIFICATIONS.
169PRE-FABRICATED HOOK-UP
170FLOW TRANSMITTER (DIFF.PRESSURE TYPE) (HOOKUP WITH CANOPY)
171PRESSURE GAUGES
172PRESSURE TRANSMITTER (HOOKUP WITH CANOPY)
173FABRICATED HOOK-UP AT SITE:Installation charges including handling, shifting from site-store / yard to the installation location, surface cleaning, painting, fabrication, installation, accessories installation (fittings, valves manifold, etc.), welding, radiography, Hydro/Pneumatic testing, clamping, tagging, consumables, tools & tackles, manpower, scaffolding etc. all complete as per specification and direction of Engineer-in-Charge. REFER HOOK-UP DOCUMENT FOR BOM & MOC.TK-1P25A-IC-HUP-0003_C1
174DIFFERENTIAL PRESSURE TRANSMITTERS GAS SERVICE
175DIFFERENTIAL PRESSURE TRANSMITTERS LIQUID SERVICE
176D/P FLOW TRANSMITTER - ORIFICE LIQUID SERVICE (BELOW PIPE)
177D/P FLOW TRANSMITTER - ORIFICE GAS SERVICE (ABOVE PIPE)
178D/P FLOW TRANSMITTER - ORIFICE STEAM SERVICE
179PRESSURE GAUGE REMOTE MOUNTED -GAS SERVICE
180PRESSURE GAUGE REMOTE MOUNTED -LIQUID SERVICE
181PRESSURE GAUGE REMOTE MOUNTED -STEAM SERVICE
182PRESSURE TRANSMITTER - LIQUID SERVICE
183PRESSURE TRANSMITTER - GAS SERVICE
184PRESSURE TRANSMITTER - STEAM SERVICE
185DIFFERENTIAL PRESSURE GAUGE
186D/P LEVEL TX. REMOTE DIAPHRAGM SEAL
187PRESSURE GAUGE REMOTE DIAPHRAGM SEAL
188PRESSURE TX REMOTE DIA.SEAL
189INSTRUMENT AIR MANIFOLDS- INSTALLATION
190Installation charges including handling, transportation to the installation location, hardware/fasteners, accessories installation, pneumatic testing, cleaning/flushing, require consumables, tools & tackles, manpower, etc. all complete as per specification and direction of Engineer-in-Charge.
19110 WAY
192TUBE AND TUBE FITTING- INSTALLATION
193Installation charges including handling, TPI charges, transportation to the working location, fabrication, accessories installation (fittings, valves manifold, etc.), tools & tackles, manpower, scaffolding , Hydro/Pneumatic testing, dressing, clamping, tagging, etc. all complete as per tkUIPL-INDIA specification-
194SS316 TUBE SIZE
19512mm OD x 1.65mm WT, Seamless, SS316
19610mm OD pvc COATED Copper Tube
197FITTINGS- SS316
198MALE CONNECTORS- SS316 (1/2\\" NPTM x 12mmOD)
199MALE CONNECTORS- SS316 (1/4\\" NPTM x 12mm OD)
200FEMALE CONNECTOR- SS316 (1/2\\" NPTF x 12mmOD)
201UNION TEE 12mm OD x 12mm OD x 12mm OD)
202TUBE UNION (12mm OD x 12mm OD)
203TUBE CAP (12mm OD)
204NEEDLE VALVE
205GATE VALVE (1/2\\" NPTF x 1/2\\" NPTF)
206END BLIND CAP (NPT MALE)
207ADAPTOR/REDUCER
208CONDENSATE POT-SS316 (3\\" Pot with, 1/2\\"NPT)
2092 VALVE MANIFOLD SS316 (1/2\\"NPTFx1/2\\"NPTF)
210MALE CONNECTOR, 12mm OD X 3/4\\"NPTM, SS316
211MALE CONNECTOR, 12mm OD X 1\\"NPTM, SS316
212Instrument Tube support
213MALE CONNECTOR, 12mm X 1/4\\"(G), SS316,TYPE, WITH DOUBLE FERRULES,
214MALE CONNECTOR, 12mm X 1/8\\"(G), SS316,TYPE, WITH DOUBLE FERRULES,
215C series check valve 12mm OD,crack pressure,1/3PSIG seal,MOC-SS 316.
216Female Connector 3/4\\" NPTF X 3/4\\" OD,SS316
217CONNECTOR - 1/2\\" X 3/4\\" - BSP (M) X OD - 6000 # - SS316/SS316L
218CONNECTOR - 3/4\\" X 3/4\\" - BSP (M) X OD - 3000 # - SS316/SS316L
219Male connector double compression 1/2\\"BSP(M) x 1/2 \\" OD,SS316
220FEMALE CONNECTOR- SS316 (1/4\\" NPTF x 12mm OD)
2212 VALVE MANIFOLD SS316 (1/2\\"NPTFx1/2\\"NPTM)
222TUBE UNION-SS316 (6mm OD)
223END BLIND CAP ( 12mm OD) FOR TUBE
224INSTRUMENT CABLE LAYING
225Installation charges including handling, shifting from site-store / yard to the installation location, meggering, continuity test, Cable glanding, both side termination, cable dressing, clamping, cable tagging, ferruling, supply of consumables( like lugs, sleeve for shield/drain, sealing compounds etc.) hardware's/fasteners for clamping/dressing, making holes for cable gland/cable entries ( JBs, Panels ,etc.), tools & tackles, manpower, scaffolding etc. all complete as per specification and direction of Engineer-in-Charge.
226SIGNAL CABLES ,MULTISTRANDED,ARMOURED, FLAME RETARDANT
2271 PAIR X 1.5 mm2 Screened
2281 PAIR X 2.5 mm2 Screened
2292 PAIR X 1.5 mm2 Screened
2304 PAIR X 1.5 mm2 Screened
2316 PAIR X 1.5 mm2 Screened
2326 PAIR X 2.5 mm2 Screened
23312 PAIR X 1.5 mm2 Screened
23412 PAIR X 2.5 mm2 Screened
2351 TRAID X 1.5 mm2 Screened
2368 TRAID X 1.5 mm2 Screened
23716 PAIR X 2.5 mm2 Screened
238SIGNAL CABLES , MULTISTRANDED,ARMOURED, FIRE RESISTANCE
2391 PAIR X 1.5 mm2 Screened
2401 PAIR X 2.5 mm2 Screened
2412 PAIR X 1.5 mm2 Screened
2422 PAIR X 2.5 mm2 Screened
2434 PAIR X 1.5 mm2 Screened
2444 PAIR X 2.5 mm2 Screened
2456 PAIR X 1.5 mm2 Screened
2466 PAIR X 2.5 mm2 Screened
24712 PAIR X 1.5 mm2 Screened
24812 PAIR X 2.5 mm2 Screened
2491 TRAID X 1.5 mm2 Screened
2508 TRAID X 1.5 mm2 Screened
251FIBEROPTICAL; ARMOURED /UNARMOURED
252FIBER-OPTIC CABLES- Single Mode , 6 Fibre
253POWER CABLES, MULTISTRANDED/SINGLE, ARMOURED
2543Cx2.5 SQMM
255EARTHING CABLES; UNARMOURED
2561 CORE X 6 mm2
257CABLE GLANDING AND TERMINATION
258Installation charges including TPI charges, transportation to working location ,require hardware/fasteners, consumables, installation of hoods & adapters, tagging ,ferruling, lugging, supply of consumables( like lugs, sleeve for shield/drain, sealing compounds etc.) , making suitable holes for cable entries, tools & tackles, manpower, scaffolding etc. all complete as per specification and direction of Engineer-in-Charge. Glanding & termination is included in cable laying cost. Following is applicable if contractor to perform only glanding & termination and cables are layed by others.
259SIGNAL,CONTROL,POWER CABLES
2601/2\\" NPT DOUBLE COMPRESSION SS304 with shrouds
2611/4\\" NPT DOUBLE COMPRESSION SS304 with shrouds
2621-1/2\\" NPT DOUBLE COMPRESSION SS304 with shrouds
2631-1/4\\" NPT DOUBLE COMPRESSION SS304 with shrouds
2641\\" NPT DOUBLE COMPRESSION SS304 with shrouds
2651/2\\" NPT BLINF PLUG
2661-1/2\\" NPT BLIND PLUG
2671 1/4\\" NPT PLUG
268CABLE GLANDS 1-1/2\\" ET, Weatherproof with Checknut (PANEL)
269CABLE GLANDS 1\\" ET, Weatherproof with Checknut (PANEL)
270CABLE GLANDS 1-1/4\\" ET, Weatherproof with Checknut (PANEL)
271CABLE GLANDS 1/2\\" ET, Weatherproof with Checknut (PANEL)
272CABLE GLANDS 3/4\\" ET, Weatherproof with Checknut (PANEL)
2731 1/2\\"NPT X 1*1/4''NPT (F) NPT Reducer DOUBLE COMPRESSION CABLE GLAND
2741/2\\" NPT X 3/4\\"NPT ADAPTER DOUBLE COMPRESSION CABLE GLAND
275ADAPTOR M32 (M) x M40 (F)
2763/4\\" NPT DOUBLE COMPRESSION
2771 1/2\\"NPT X 1\\"NPT ADAPTER DOUBLE COMPRESSION CABLE GLAND
2781 1/2\\"NPT X 2\\"NPT ADAPTER DOUBLE COMPRESSION CABLE GLAND
279FIBER OPTICAL; ARMOURED /UNARMOURED
280Scope includes preparation of all fibres and splicing / patching ,Supply of adequate consumables for the execution of the work (such as fibre optic connectors suitable for the application), testing, tools & tackles, manpower, scaffolding etc. all complete as per specification and direction of Engineer-in-Charge.
281FIBER-OPTIC CABLES- Single Mode , 6 Fibre
282CABLE TRAYS/DUCTS INSTALLATION
283Installation charges including transportation to working location, TPI charges , Fabrication, Clamping, accessories installation (including bends, elbows, reducers etc.), Tray identification, painting wherever require, consumables, tools & tackles, manpower, scaffolding etc. all complete as per REFER AS TP-1ZZZA-IC-SPE-0033_D1 Specification for Instrument Installation and direction of Engineer-in-Charge.
284PERFORATED TRAY WITH COVERS ANODISED ALUMINIUM
285WIDTH 300 MM
286WIDTH 150 MM
287WIDTH 100 MM
288WIDTH 50 MM
289CONDUITS :
290RIGID HDPE CONDUITS : HDPE conduit shall be as per IS-4984 or as per equivalent IEC code. The outer sheath colour of HDPE conduits shall be orange with black for the fittings throughout the fibre optic cable run.Installation charges including transportation from tkUIPL/Client material store to working location, fabrication like (making threads, bends, etc.), require hardware’s/fasteners (U clamps etc.), clamping/supporting, accessories installation(fittings), consumables, tools & tackles, manpower, scaffolding etc. all complete as per TP-1ZZZA-IC-SPE-0033_D1 Specification for Instrument Installation and direction of Engineer-in-Charge.
29125 mm nominal dia
29250 mm nominal dia
293FLEXIBLE CONDUITS (SS304): Supply and Installation charges including TPI charges, transportation to working location, fabrication like (making threads, bends, etc.), require hardware’s/fasteners (U clamps etc.), clamping/supporting, accessories installation(fittings), consumables, tools & tackles, manpower, scaffolding etc. all complete as per REFER AS TP-1ZZZA-IC-SPE-0033_D1 Specification for Instrument Installation-and direction of Engineer-in-Charge.
29450 mm nominal dia conduit
29525 mm nominal dia conduit
296CANOPY /SUNSHADE FRP - INSTALLATION
297Installation charges including TPI charges ,transportation to working location, supporting wherever require for instruments, JBs , etc. (like integrated inline instruments, close couple mounted instruments, etc.), hardware's/fasteners, consumables etc. Fabrication, installation, tools & tackles, manpower, scaffolding etc. all complete as per TP-1ZZZA-IC-BOD-0001_D3 Engineering Design Basis for Instrumentation and direction of Engineer-in-Charge.
298PREFABRICATED. CANOPIES
299SINGLE TRANSMITTER/INSTRUMENT
300TWO TRANSMITTERS/INSTRUMENTS
301SINGLE JUNCTION BOXES
302THREE JUNCTION BOXES
303FOUR JUNCTION BOXES
304HAND SWITCH/PUSH BUTTON
305MULTIPLE TRANSMITTERS/INSTRUMENTS
306TWO JUNCTION BOXES
307SIX JUNCTION BOXES
308EIGHT JUNCTION BOXES
309FIVE JUNCTION BOXES
310SEVEN JUNCTION BOX
311STANCHIONS FOR INSTRUMENTS - INSTALLATION
312Installation charges including TPI charges, transportation to working location, brication, surface cleaning, painting, suitable clamps with pipe line (for close couple hook-ups etc.), hardware's/fasteners, grouting, clamps, consumables, tools & tackles, manpower, scaffolding etc. all complete as per tkUIPL-INDIA specification-REFER AS PER DOCUMENT 25284124-8551-65-000-0004 INSTRUMENT INSTALLATION SKETCHES and direction of Engineer-in-Charge.
313FLOOR MOUNTING
314STEEL COLUMN MOUNTING
315PLATFORM MOUNTING
316OUTSIDE HAINDRAIL
317MULTIPLE TX ON PLATFORM MOUNTING
318Installation of Base Frame for panels in MMS Room
319STRUCTURAL STEEL
320Installation charges including TPI charges, transportation , fabrication, installation, surface cleaning, painting , consumables, tools & tackles, manpower, etc. all complete as per tkUIPL-INDIA specification.and direction of Engineer-in-Charge.
321STRUCTURAL STEEL
322NUT & BOLTS WITH WASHERS, M10x35mm, SS
323NUT & BOLTS WITH WASHERS, M12x50mm, SS
324ANCHOR FASTNER, M10x80mm, MS (CADMIUM)
325BEAM CLAMP WITH SS BOLT & NUT , HEIGHT 40mm, MS/SS
326PIPE CLASS B,IS=1239 PART-1 , 2\\", MS(PAINTED)
327COVER PLATE FOR 2\\"PIPE , 6THK., MS(PAINTED)
328RIBS (STIFFNERS),250x60x40 (10THK),MS
329TYPE \\"J\\" HOOK BOLT & NUT , M10x100mm, MS
330BASEPLATE,250x250X10THK..,MS
331ANCHOR FASTNER, M10x100mm, MS HD.GALVANISED
332ANCHOR FASTNER, M12x100mm, MS (CADMIUM)
333STRUT CHANNEL (1-5/8\\")
334ROD THREADED (1/2\\")
335SQUARE WASHER (1/2\\")
336FIRE PROOFING FOR CABLE DUCT,TRAY,ANGLE TRAY,ETC.- INSTALLATION
337Installation charges including TPI charges, transportation to working location, installation of Mattresses, Cladding, SS Clamps, all fittings, accessories, tools & tackles, manpower, scaffolding etc. all complete as per tkUIPL-INDIA specificationand direction of Engineer-in-Charge.REFER AS TP-1ZZZA-IC-SPE-0033_D1 Specification for Instrument Installation
338PERFORATED TRAY WITH COVERS ANODISED ALUMINIUM
339WIDTH 300 MM
340INSTRUMENT CALIBRATION
341Calibration charges including handling, shifting from site-store / yard to the installation location, restore to safe place after calibration, removable and reinstallation from/to package units, if required, require tools & tackles, manpower, calibrators, calibration laboratory, changing range / engg. unit etc. as per data sheet, trouble shooting, zero elevation & subtraction, preparation of reports, hardware/fasteners, consumables, Labelling (with range, date, tag), etc. all complete as per specification and direction of Engineer-in-Charge.
342TRANSMITTERS (PNEUMATIC + ELECTRONIC)
343MAGNETIC FLOW METERS (REMOTE MOUNTED TRANSMITTERS ONLY)
344MASS FLOWMETERS (REMOTE MOUNTED TRNASMITTERS ONLY)
345ANNUBARS/PITOT TUBEs (DP TYPE FLOW METER)
346DP TYPE FLOW TRANSMITTERS
347GAUGE PRESSURE TRANSMITTERS
348PRESSURE TRANSMITTER REMOTE SEAL PAN CAKE TYPE WITH FLUSHING RING
349DP TRANSMITTER REMOTE SEAL PAN CAKE TYPE WITH FLUSHING RING (HP+LP)
350DIFFERENTIAL PRESSURE TRANSMITTER
351DISPLACER LEVEL TRANSMITTER
352TEMPERATURE TX SEPARATELY MOUNTED
353LOOP POWER LOCAL INDICATORS
354TUNING FORK LEVEL SWITCH
355ANALYSERS
356MOISTURE ANALYSER
357ETHANE ANALYSER
358BUTANE ANALYSER
359PROPENE ANALYSER
360PROPYLENE ANALYSER
361TEMPERATURE ELEMENTS AND THERMOWELLS
362RESISTANCE TEMPERATURE DETECTORS WITH THEMOWELL
363THERMOCOPLES WITH THEMOWELL
364TEMPERATURE GAUGES WITH THERMOWELLS
365RIGID STEM TYPE
366LEVEL GAUGE
367MAGNETIC TYPE LEVEL GAUGE
368PRESSURE GAUGES
369SCREW CONNECTION
370FLANGED WITH FLUSHING RING
371PRESSURE SAFETY VALVE
372STROKE CHECKING/CALIBRATION FOR CONTROL VALVES AND ON-OFF VALVES
373(Stroke checking/Calibration charges including adjustment of positioners w.r.t. mA, feed backs (limit switches), feed back transmitters (positioner transmitters), seat leak test as per project requirement, oil free instrument air subject to it not available in the plant, tools & tackles, manpower, calibrators, test benches, hardwares, consumables, Labelling (with range, date, tag), ensure flow direction of installed valves if doing on line calibration/stroke checking, etc. all complete as per specification and direction of Engineer-in-Charge. Control/ on-off valves with mechanical stopper shall be checked for proper stopper adjustment as required for the process before installing on line.
374CONTROL VALVES WITH ELECTRO PNEUMATIC POSITIONERS (SMART POSITIONER)
375ON-OFF VALVE WITH SOV AND TWO FEED BACK
376MOV WITH CONTROL & ON-OFF
377LOOP CHECKING
378Loop checking charges including consumables, tools-tackles, continuity test (cold loop) of each cable if its not done after cable laying, ensure flow direction of in line instruments (like orifice type flow annubars/venturi, magnetic, mass, vortex flow meter, rota meter, Control valves, ON-OFF valves, etc.), trouble shooting, tools & tackles, manpower, calibration if require etc. all complete as per specification and direction of Engineer-in-Charge.
379LOOP CHECKING FOR ANALOG AND DIGITAL
380ANALOG INPUT
381ANALOG OUTPUT
382DIGITAL INPUT
383DIGITAL OUTPUT
384ASSISTANCE FOR EXECUTION OF WORK (SKILLED / UNSKILLED).
385Note: These rates for man power are applicable only after total completion of Instrumentation Installation & Instrumentation Commissioning activities.
386Note: These rates for man power are applicable only after total completion of Instrumentation Installation & Instrumentation Commissioning activities.
387Hiring of 1 No. Passenger Vehicle (XUV 300 / Bolero / Scorpio) with Driver for upto 3000 KM in a Month basis with atleast 12 Hours per day . Beyond the mentioned KM or duty Hrs per month/ day, extra amount shall be payable as mentioned below 2 SOR line items(Note: The above vehicle shall be purely for the NRL usage for the PRU Instrumentation activities as per the decision of EIC. Also, the condition of the vehicle must be satisfactory to the EIC and the vehicle registration should not be more than 3 years earlier w.r.t. the date of NIT)
388Passenger Vehicle running beyond 12 HRS per day (shall be payable on additional Hour per day basis)
389Passenger Vehicle running beyond 3000 KM per month (shall be payable on additional KM per month) Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 57447109
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE Ref. Documents
LAST DATE 16-09-2026
Authority
Authority Name Numaligarh Refinery Limited
Work Description Tender for Instrumentation Works For Propylene Recovery Section (Pru) For Epcm1 At Nrep
Basic Detail
Tender No TK-1P25A-MP-RFQ-0060
Bidding Type Tender
Location
City Golaghat
State Assam
Key Dates
Publish Date 11 Sep 2026
Submission Date 16 Sep 2026
Open Date 01 Jan 0001
Finance
Tender Value Ref. Documents
Tender Fee Ref. Documents
EMD Ref. Documents
Exemption Not Available
Document List
49953a41-ebf5-4dfc-a5fd-d3e1f491cbe5.html
BOQ_972722.xls
NIT_IC_Works_PRU.pdf
Part-I.rar
Part-II-1.rar
Part-II-2.rar
Part_III.rar
Tendernotice_1 (10).pdf
AI-generated summary — verify details from the official tender portal before submission.

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Sep 11, 2026
11:30 IST

Tender Published

Tender notice published.

Today
Sep 16, 2026
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Upcoming · 5 days
Sep 16, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 5 days

Tender Documents

Download All (ZIP) ↓
html

49953a41-ebf5-4dfc-a5fd-d3e1f491cbe5.html

xls

BOQ_972722.xls

pdf

NIT_IC_Works_PRU.pdf

rar

Part-I.rar

rar

Part-II-1.rar

rar

Part-II-2.rar

rar

Part_III.rar

pdf

Tendernotice_1 (10).pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders