Tender For Special Repairs To Primary Health Centre Building At Gholawad Tal Dahanu. Dist Palghar
Tender Value
12.57 Lakhs
Estimated cost
Bid Submission
25 Sep 2026
12 days left
EMD
12572
Bank guarantee accepted
Document Fee
2360
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Palghar → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Primary Health Centre Building At Gholawad Tal Dahanu. Dist Palghar
BOQ
| Sl. No. | Item Description |
| 1 | Excavation for foundation in earth,soils of all types, sand gravel and soft murum, including removing the excavated material up to a distance of 50 meters beyond the building area and lift as Specified, stacking and spreading necessary dewatering etc complete. |
| 2 | Dismantling brick masonry in lime or cement mortar and stacking the materils as directed with all leads, lifts etc. |
| 3 | Removing cement or lime plaster including disposing of the spoils as directed with all leads, lifts, complete. Spec. No.: As directed by Engineer in charge. |
| 4 | Removing W.C. Pan including disconnecting the sanitary and water supply connections, removing and breaking flooring and bed con-crete around pan removing the same carefully and stacking the service-able materials as and where directed including of throwing the unserviceable materials out side. Spec. No.: As directed by En-gineer in charge. |
| 5 | Removing lime or lean cement concrete including stacking the spoils as directed with all leads, lifts etc, complete. |
| 6 | Dismantling doors and windows shutters without frame and stacking the materials as directed with all leads, lifts etc. complete.Spec. No.: BdW- 8 Page No. 587 |
| 7 | Providing dry trap/rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. |
| 8 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand |
| 9 | Providing and laying in situ / ready mix M20 CC of trap/ granite/ quartzite/ gneiss metal for wearing course 8cm thick including compacting, finishing, curing and filling in joints with bitumen etc. complete. (with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant / pan mixer with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc ) |
| 10 | Providing second class burnt brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, racking out joints, watering and scaffolding complete. |
| 11 | Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, Making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting complete, |
| 12 | Providing and fixing of colour coated Zinc aluminium ( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminiumm 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyster paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center-to-center. The end rib shall be designed for anti-capacity groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 kg/sqm) 900 mm girth (Surface Width). |
| 13 | Providing and fixing green marble of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing / moulding the sharp edges wherever necessary, curing, etc. complete. |
| 14 | Providing and fixing in position C.C.T.W. brackets for weather shads of section 70 x 45 mm with mortise and tenon joinery at 1.2 to 1.5 metre center to center or as directed and teak wood battens of required section, including fixing three numbers of iron nut and bolts to each bracket, necessary scaffolding and two coats of painting to wood work etc. complete.Spec. No.: As directed by Engineer-in-charge |
| 15 | Providing and fixing 22 B.W.G.. plain galvanized iron sheets on top of weather shed, including scaffolding, fixing by means of nut and bolts or as directed etc. complete. (Brackets of 70 x 45 mm to be paid separately)Spec. No.: As directed by Engineer-in-charge |
| 16 | Providing and laying damp proof course 50 mm thick in M20 cement concrete layer and bitumen / using cement with waterproofing compound curing, formwork etc. complete. |
| 17 | Providing and fixing in position extruded aluminium partitions having frame made out of extruded tubular section of size 65 mm x 40 mm with 12 mm thick three layered flat pressed teakwood particle board bonded with BWP type exterior grade phenol formaldehyde synthetic resin conforming to IS 129231990, laminated on both sides, Novateak or equivalent with aluminium glazing clips of size 12 mm x 12 mm (conical) as per drawing etc. complete. |
| 18 | Providing and fixing partition with kadappa stone of all sizes and 25 mm thick polished on both side and edges to original including fixing in position in cement mortor 1:4 curing polish-ing, cleaning etc complete. |
| 19 | Providing and fixing solid core flush door commercial type on single leaf 16 mm thick Bison Panel cement bonded particle Board including Teak wood lipping beading on all four edges without ventilator commercial type of exterior grade as per detailed drawings with wrought iron hold fast,stainless steel Hinges and cromium plated fixtures and fastenings and handles on both sides and finishing with oil painting three coats complete. Spec. No.: As directed by Engineer in charge. |
| 20 | Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mm at weight 0.547 kg/Rmt. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 kg/Rmt. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. And handle section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. and top section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With powder coating with box |
| 21 | Providing and laying ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete. |
| 22 | Providing and laying ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for dado in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete. |
| 23 | Providing and fixing European type Colour glazed earthenware water closet pan with UPVC seat and lid with chromium plated brass hinges and rubber buffers including UPVC and vent pipe up to the outside face of wall without flushing cistern with flush cock and with water Jet and necessary fittings including cutting and making good to the walls and floors testing etc. complete.( prior approval of sample and brand by Ex. Engineer is necessary before use) |
| 24 | Providing and fixing white glazed earthenware Wash Hand Basin of 45 x 30 cm----------- size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connections including P.V.C. waste pipe and trap up to the outside face of the wall. Spec. No.: Bd.V.30 Page No. 565 |
| 25 | Providing and fixing collapsible steel gate in one / two leaves with hot rolled vertical channels of 18 x 9 x 3 mm minimum size, crossings of M.S. flats of size 18 x 5 mm T or E section for runner of minimum 40 x 6 mm size for flange, M.S. flat for top runner of minimum size 40 x 12 mm with roller wheels confirming to grade F.G. 150 fitted with snap headed rivets of minimum size 6 mm max. spacing of vertical channels be 100 mm enclosed gate position and clear space of 150 mm between two sets of crossings with hold fasts, stoppers, spaces, handles, locking arrangement and one coat of red lead primer and oil painting etc. complete. (I.S. 105211983). |
| 26 | Providing and fixing 40mm diameter and 1.5mm thick Stainless steel railing in S.S.304 Grade including fabricating ,fixtures, errecting , necessary welding , griding , finishing, buffing to stainless steel pipe etc. complete.Spec. No.: As directed by Engineer Incharge |
| 27 | Providing and fixing on walls/ ceiling/ floor ------15mm- dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete.Spec. No.: BD.V 5 page 551 and as directed by Engineer in charge |
| 28 | Providing and fixing --15mm------- diameter screw down bib/ stop tap of brass including necessary socket union nut complete. Spec. No.: Bd.V.8 Page No. 554 |
| 29 | Providing & constructing Brick Masonry Inspection Chamber .60 x 45 x 90.cm size including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and airtight with R CC cover with frame fixed in cement concrete etc. complete. Spec. No.: Bd.V.43, Page No. 626 |
| 30 | Providing and fixing 24 gauge plain aluminium sheet on the face of door shutter including cutting to required size and fixing the screws including making good the damages if any to existing door shutter and frame etc. complete as directed or as per detailed drawing.Spec. No.: As directed by Engineer in charge. |
| 31 | Providing and fixing mild steel grill work for windows, ventilators etc.15kg/smt-as per drawing including fixtures, necessary welding & painting with one coats of anticorrosive paint & two coats of oil painting complete. |
| 32 | Providing internal cement plaster 12 mm thick in single coat in cement 1:4 with neeru finish to concrete or brick surface in all position including racking out joints, scaffolding and curing complete. |
| 33 | Providing internal cement plaster 12 mm thick in single coat in cement 1:5 with neeru finish to concrete or brick surface in all position including racking out joints, scaffolding and curing complete. |
| 34 | Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days complete. |
| 35 | Providing and applying washable oil bound distemper of approved colour, shade and quality to old/new surface, in two coat including scaffolding, preparing the surfaces (excluding primer coat) etc. complete. |
| 36 | Providing and applying two coats of synthetic enamel paint of approved colour to new /old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) complete. Spec. No.: Bd.0.5 Page No. 405 |
| 37 | Providing and fixing 90 cm x 60 cm Marble plate engraving 10 cm. height letter, figures including painting the lefters/figures with approved colour and shade complete |
| 38 | Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. |
| 39 | Providig and fixing wleded mesh fabric for guniting of mesh size 75 mm x 75mm and 10 guage thick including scaffolding etc.complete |
| 40 | Providing and fixing 6.00 mm thick Asbestos Cement Corrugated (Big size) sheet roofing including galvanised iron 'J' or 'L' hook bolts galvanised iron band bituminous G.I. washers, galvanised iron clamps and bolts and nuts and scaffolding complete. Spec. No.: Bd. R.7, Page No. 453 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysSep 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender