Tender For Advertized Rate List /Bill Of Quantity For Stage Contract For ,Maintanance Of Roads & Bridges (P/L Of Reinforced Cement Concrete Pipes/ Clearance Of Drains Repair/ Renovation Of Drains, Retaining Wall Slip Clearance (Part-Ii) R&B Sub Divis
Tender Value
5 Lakhs
Estimated cost
Bid Submission
18 Sep 2026
8 days left
EMD
10000
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baramulla → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Advertized Rate List /Bill Of Quantity For Stage Contract For ,Maintanance Of Roads & Bridges (P/L Of Reinforced Cement Concrete Pipes/ Clearance Of Drains Repair/ Renovation Of Drains, Retaining Wall Slip Clearance (Part-Ii) R&B Sub Division Sangrama
BOQ
| Sl. No. | Item Description |
| 1 | Engagement of JCB for clearance of site, removal of material from road surface including earthwork and disposal of material from source to site of work as desired by Engineer-in-charge at site complete job. |
| 2 | Clearance of slips disposal lead upto 50 m and lift upto 1.5 m. |
| 3 | in ordinary soils disposal lead upto 50 m and lift upto 1.5 m. |
| 4 | in soils; mixed with moorum/ Kankar/shingle/ boulders; disposal lead upto 50 m and lift upto 1.5 m. |
| 5 | In soils; mixed with Decomposed Rocks; by blasting or any other means |
| 6 | Surface dressing of the ground including removing vegetation and in- equalities not exceeding 15 cm deep and disposal of rubbish, as directed by engineer -All kinds of soil |
| 7 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m,including getting out excavated earth and disposal of surplus excavated |
| 8 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil : |
| 9 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc .upto required depth ) and for shafts, wells, cesspits including dressing of sides and ramming of bottoms , including getting out excavated earth and disposal of surplus excavated earth as directed, ( All kinds of Soil) |
| 10 | Supply and laying of dry stone soling (hand packed) in foundation trenches and ramming, including all leads, lifts cost and carriage of materials involved complete. |
| 11 | Supply and filling of Nallah Muck/Quarry Muck/Stone soling of specified size including spreading, watering, ramming, compacting with PRR of 8 to 10 Tonne capacity including carriage of the same from approved source upto site of work complete |
| 12 | Supply and filling of Khak bajri including spreading, watering, ramming, compacting with PRR of 8 to 10 Tonne capacity including carriage of the same from approved source upto site of work complete ( for Berm) |
| 13 | Supplying and filling in plinth with fine sand under floors including, watering, ramming, consolidating and dressing complete. |
| 14 | Supplying and stacking of good earth at site including royalty (earth measured in stacks will be reduced by 20% for payment) |
| 15 | Providing / laying of RCC Pipes in proper position/ grade including cutting of road surface upto required depth, providing requisite cushion including carriage of all materials and pipes upto site of work complete. |
| 16 | Providing / laying of MS Pipes Medium Duty in proper position/ grade including cutting of road surface upto required depth, providing requisite cushion including carriage of all materials and pipes upto site of work complete. |
| 17 | Providing & laying in position specified grade of cement concrete, including the cost of centering, shuttering, finishing. All work up to plinth level in 1: 4: 8 (1 cement: 4 coarse sand: 8 graded stone aggregate) 40mm nominal size Crushed, including all leds, lifts cost & carriages of materials upto site fo work complete. |
| 18 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 19 | Providing & laying in position specified grade of cement concrete, including the cost of centering, shuttering, finishing. All work up to plinth level in 1: 3: 6 (1 cement: 3 coarse sand: 6 graded stone aggregate) 20mm nominal size Crushed, including all leds, lifts cost & carriages of materials upto site fo work complete. |
| 20 | Providing & laying in position specified grade of cement concrete, including the cost of centering, shuttering, finishing. All work up to plinth level in 1: 2: 4 (1 cement: 2 coarse sand: 4 graded stone aggregate) 20mm nominal size Crushed, including all leds, lifts cost & carriages of materials upto site fo work complete. Upto Plinth. |
| 21 | Providing & laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement. All work up to V- level in 1: 1.5: 3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate) 20mm nominal size Crushed, including all carriages of material involved upto site of work. Upto Plinth |
| 22 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering,finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size). Complete Job |
| 23 | Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete |
| 24 | Providing & laying damp-proof Course 40 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone agg 12.5 mm nominal size) and curing complete |
| 25 | Centering and shuttering including strutting, propping etc. and removal of form work for: |
| 26 | foundation, footings basses of columns etc . For mass concrete including all carriages. |
| 27 | for Lintels, beams,plinth beams, girders, bressumers and cantilevers including all carriages. |
| 28 | for suspended floors, roofs, landings, balconies and access platforms. including all carriages. |
| 29 | Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. including all carriages. |
| 30 | stairs (excluding landings) except spiral staircases. including all carriages. |
| 31 | for columns,pillars,piers,abburtments,posts and struts including all carriages. |
| 32 | Edges of slabs and breaks in floors and walls including all carriages. |
| 33 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 25mm thick with 12.5 mm nominal size stone aggregate. |
| 34 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20 mm nominal size stone aggregate. |
| 35 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate. |
| 36 | Reinforcement for R.C.C work, including straightening, cutting, bending, placing in position and binding all complete with Thermo-mechnically treated bars of grade Fe-500 or more, including all carriages of material involved upto site of work complete |
| 37 | Structural Steel work welded in built up sections / framed work (angle iron, Flate iron, Gusset plates, chanells etc) including cutting, hoisting, fixing in position angle iron/ flat iron and including Painting of two or more coats including primining coat of red oxide including all leads, lifts, costs & carriages of materials upto site of work complete |
| 38 | Providing hoisting and fixing trusses/purlins/ rafters/posts/post- plates, false ceiling , Partitions etc. Sawn and fixed in poisition or like components including cost of screws etc. complete First class Poplar wood including all carriages. |
| 39 | Providing wood work in frames of doors, windows, clesrestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) imported KD wood including all carriages |
| 40 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. |
| 41 | Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work. including all carriages of material upto site of work complete. |
| 42 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coats on new wood work and wood based surfaces. including all carriages of material upto site of work complete. |
| 43 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) . |
| 44 | Finishing wall with premium acrylic smooth exterior paint with silicone additives of required shade on New work (two or more coats applied @ 1.43 liter/10sqm over and including priming coat of water exterior paint applied @ 2.20kg/10sqm) |
| 45 | Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm of approved brand and manufacture |
| 46 | Providing, laying and making kerb channel 30cm wide and 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth etc. complete as per direction of Engineer-in charge. |
| 47 | Dismantelling/ demolishing of stone masonary including disposal of same including stacking of serviceable material and disposal of unserviceable material as per the directions of Engineer incharge at site. (Dismentalled/ serviceabale materials to be reused at site of work) |
| 48 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix), |
| 49 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1 :4:8 or richer mix (i/c equivalent design mix), |
| 50 | Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge. |
| 51 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: in cement mortar |
| 52 | Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar |
| 53 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead |
| 54 | Dismantling steel work in single sections including dismembering and stacking within 50 meters lead in :Channels, angles, tees and flats |
| 55 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 meters lead |
| 56 | Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead. |
| 57 | Dismentalling of damaged CGI sheets fencing including stcking of serviceable materials dismantelled materials to be handed over to college authorities complete |
| 58 | Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 meters lead of : G.S. Sheet |
| 59 | Providing & laying Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) Dark shade using ordinary cement with cariages of alll involved materials. |
| 60 | Providing and laying 12 mm thick vitrified path tiles in different sizes ) with water absorption less than 0.08%and conforming to IS:15622 of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand)including grouting the joints with white cement and matching pigments etc. complete job (600 x 600 mm) |
| 61 | Providing/ Fixing of granite stone board 18mm thick including letter writing with logo of approved shape , size & design of size (3'x2') duly approved by engineer incharge with all accessories like ribbon, sessor, curtain, decoration as per requirement. All inclusive with cost of labour, material & carriages of all involved materials upto site of work complete job (Work to be carried out as per directions of Engineer incharge) for inaugration purpose |
| 62 | Providing and laying 50mm thick interlocked cement concrete tiles of approved quality Rubber moulded (anti skid) for path of required shape,size,colour laid over a bed of 50mm thick sand cousion over a bed of 75mm thick lean concrete in 1:4:8 mix laid over 100mm thick stone soling including cost of cement concrete side blocks of 12\\" x 6\\" size laid in cement concrete 1:2:4 mix (1 cement: 2 course sand: 4 graded stone aggregate) including polishing,cleaning of Tiles. All inclusive with labour, cost & carriage of all involved materials complete job. |
| 63 | Random rubble masonry with hard stone from quarry in foundation and plinth in cement mortar 1:6 (1cement : 6 course sand), including leveling up with cement concrete 1:6:12 (1cement: 6 course sand: 12 graded stone aggregate 20mm nominal size) at plinth level with all leads lifts cost & carriages of materials involved upto site of work complete |
| 64 | Dry Random Rubble masonry in foundation and plinth using quarry stones with bond stones all leads lifts cost & carriages of materials involved upto site of work complete. |
| 65 | Random Rubble masonry with hard stone in foundation and plinth using Quarry Stone including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) and curing complete with Cement mortar 1:6 (1 Cement : 6 coarse sand) (labour only) |
| 66 | Dry random rubble masonry with hard stone in foundation and plinth using quarry stone with bond stone (labour only) |
| 67 | Supply & filling of 2nd class stones into wire crates with wire of 4mm dia anealed wire including hand packing tightly with tipping and tightening of crates with cost of crates. All inclusive with cost, labour & carriage of all involved materials complete job (Including cost of crates). |
| 68 | Preparation of sub-grade by excavating earth to an average of 22.5 Cm depth, dressing to Camber and consolidation with road roller including making good the undulation etc. and disposal of surplus earth upto 50 Mtrs. |
| 69 | Scarifying the existing bituminous road surface to a depth of 50mm and disposal of scarified material within all lifts and lead upto 1 km (by mechanical means). |
| 70 | Scarifying metalled (water-bound) road surface including disposal of rubbish lead upto 50m and consolidation of the aggregate received from scarifying with power road roller of 8 to 10 tonne capacity. |
| 71 | Supply & stacking and laying of non macdam type solling including applying of binding material (khak bajri/ Moorum) as per requirement/ specification at site including all leads, lifts cost & carriages of materials upto site of work complete job(spalls 100-150 mm size ) |
| 72 | Supply & stacking and Laying W.B.M base course with non macdam type solling including applying of binding material including screening, sorting, spreading to template & consolidation with Power Road Roller of 8-10 Tonne capacity etc. complete job |
| 73 | Providing and Laying Water Bound Macadam base course with Quarry Crushed stone aggregate 90 to 45mm size, stone screening 13.20mm size and binding material as per MORTH specification including screening, sorting, spreading to template and consolidation with PRR of 8 to 10 Tonne capacity including carriage of Quarry Crushed stone aggrregate All inclusive with costs & carriages of all involved materials upto site of work (Compacted quantity after deduction of voids) |
| 74 | Supply, stacking & spreading of 63mm to 45mm size stone aggregate. (Quary Crushed) Including applying stone screening of 13.20 mm size @16% & binding material @ 8% of total quantity including consolidation with Power Road Roller with 8-10 Tonne capacity to required gradient and camber. Complete job as per relevant clause of MORTH specification including scarifying of damaged road surface to Geometrical size. All inclusive with costs & carriages of all involved materials upto site of work (Compacted quantity after deduction of voids) |
| 75 | Supply, stacking & spreading of 53mm to 22.40mm size stone aggregate. (Quary Crushed) Including applying stone screening of 11.20 mm size @18% & binding material @ 8% of total quantity including consolidation with Power Road Roller with 8-10 Tonne capacity to required gradient and camber. Complete job as per relevant clause of MORTH specification including scarifying of damaged road surface to Geometrical size. All inclusive with costs & carriages of all involved materials upto site of work (Compacted quantity after deduction of voids) |
| 76 | Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge, incld all carriages from source upto the site of work complete job |
| 77 | Providing and applying tack coat using hot straight run bitumen of grade VG-10 incld heating the bitumen ,spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler ,cleaning and preparing the existing road surface as per specification on W.B.M./W.M.M. @ 0.75 kg/Sqm incld carriage of material from source to site of work |
| 78 | On bitumen surface @ 0.50 Kg/sqm. |
| 79 | Providing, laying by manually & rolling with 80-100KN Roller 20mm thick open graded compacted premix carpet surfacing using Bitumen of grade 80/100 @ 1.44Kg/Sqm of road surface, using stone chippings 0.027Cum/Sqm (13.2mm size @ 0.018Cum and 11.2mm size @ 0.009Cum/Sqm) including P/L and rolling with 80-100KN roller seal coat of premixed fine agg. using Bitumen @ 0.768Kg/ of bitumen /sqm road surface using stone grit/ sand @ 0.006Cum/ Sqm & tack coat @ 0.50/0.75Kg of Bitumen /Sqm all inclusive including preparing surface for tack coat by wire brushing, brooming and fanning the surface with gunny bags to remove mud, loose dirt and dust by compressed air, providing and applying primer/ tack coat using hot straight run bitumen of grade 80/100 over prepared surface complete job as per relevant clause of MORTH specifications including cost and carriages of all involved materials up to site of work |
| 80 | Providing and laying bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specifications and directions of Engineer-in-Charge 50-100 mm average compacted thickness with bitumen of grade VG-10 @3.5% (Percentage by weight of total mix) prepared in drum type Hot Mix Plant 0f 60-90 TPH capacity incld.all carriages complete |
| 81 | Providing and laying semi- dense Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge.25 mm compacted thickness with Bitumen of grade VG-10 @ 5% (percentage by weight of total mix) and lime fitter @ 2%(percentage by weight of Aggregate) prepared in Drum Type Hot Mix Plant of 60-90 TPH capacity incld carriage complete. |
| 82 | Providing and laying 6 mm thick seal coat of premixed fine aggregate (passing 2.36 mm and retained on 180 micron sieve} with bitumen using 1 28 kg of bitumen of grade VG-10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface including rolling and finishing with road roller all complete incld carriage. |
| 83 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required: 0.50 mm thick with zinc coating not less than 275 gram/m2, including all carriages. |
| 84 | Providing and fixing precast reinforced cement concrete 1:1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) kilometer stone as per standard design including finishing smooth in 1:3 cement mortar ( 1cement : 3 fine sand) but excluding the cost of earth work, concrete in foundation, painting and lettering etc. which shall be paid for separately. 35x111x25 cm size. |
| 85 | Providing and fixing precast reinforced cement concrete 1:1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) kilometer stone as per standard design including finishing smooth in 1:3 cement mortar ( 1cement : 3 fine sand) but excluding the cost of earth work, concrete in foundation, painting and lettering etc. which shall be paid for separately. 50x152.5x25 cm size. |
| 86 | Providing and fixing precast reinforced cement concrete 1:1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) kilometer stone as per standard design including finishing smooth in 1:3 cement mortar ( 1cement : 3 fine sand) but excluding the cost of earth work, concrete in foundation, painting and lettering etc. which shall be paid for separately. 35x93.5x18 cm size |
| 87 | 15mm thick cement plaster of mix 1:6 (1 cement: 6 coarse sand), including all carriages of material involved upto site of work complete. |
| 88 | Raised and cut pointing on stone work with cement mortar 1:3 (1cement : 3 fine sand) for plinth, including all carriages involved upto site of work complete |
| 89 | Pointing on stone work with cement mortar 1 : 3 (1 cement : 3 fine sand) :Flush/Ruled Pointing, |
| 90 | Engagement of labour / Mazdoor for one day |
| 91 | Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like. |
| 92 | Removal of unhygienic materials (so classified by the site engineer) from designated sites and its disposal as per directions, all inclusive. |
| 93 | Providing and applying 2.5mm thick road marking strips (retro-reflective) of specified shade/colour using hot thermoplastic material by fully/semi automatic thermoplastic paint applicator machine fitted with profile shoe,glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications. |
| 94 | Painting road surface marking with adequate no. of coats to give uniform finish with read mixed road marking paint conforming to IS: 164, on bituminous surface in white/yellow shade including cleaning the surface of all dirt, scales, oil, grease and foreign material etc. complete Old work ( One or more coats) |
| 95 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement: 3 coarse sand) including making joints with or without grooves (thickness of the joints except at sharp curve shall not to be more than 5mm) including making drainage opening wherever required complete etc. as per direction of Engineer-in- charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). |
| 96 | Manufacturing supplying and fixing retro reflective sign boards made up of 2mm thick aluminum sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type-IV of ASTM-D-4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC : 67-2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminum alloy rivets @ 20cm c/c to back support frame of M.S. angle iron of size 25x25x3mm along with theft resistant measures mounted and fixed with 2 nos. M.S. angles of size 35x35x5mm to a vertical post made upto M.S. Tee section ISMT 50x50x6mm welded with base plate of size 100x100x5mm at the bottom end and including making holes in pipes, angle flats, providing and fixing M.S. message plate of required size steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical M.S.-Tee support to be painted in black and white colours). Backside of aluminum sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coats including all leads and lifts etc. complete as per drawing, specification and direction of Engineer-in-charge. |
| 97 | Mandatory/Regulatory sign boards of 900 mm diameter with part as length of 3750 mm |
| 98 | Cautionary/warning sign boards of equilateral triangular shape having each side of 900 mm support length of 3650mm |
| 99 | Manufacturing supplying and fixing retro reflective sign boards of any size made up of 2mm thick aluminum sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting mounted and fixed with 2 nos. M.S. angles of required size steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer including all carriages upto site of work complete. |
| 100 | Providing & erecting \\"W\\" metal beam crash barrier comprising of 3mm thick corrogated sheet metal beam rail 70cm above road / ground level, fixed on ISMC series channel vertical post, 150x75x5mm spaced 2mtr center to center, 1.8 M high , 1.1 Mtr below ground/ road level, all steel parts and fitments to be galvanised by hot dip process all fittings to confirm IS: 1367 & IS: 1364 metal beam rail to be fixed on the verrtical posts with the spacer of channel section 150x75x5mm, 330 mm long complete as per clause 810 incl cost of cement concerete blocks of size 0.45mx045mx0.60m in M20 grade with earth work etc and all cariages complete upto site of work, Type A \\"W\\" metal beam crash barrier |
| 101 | Providing and erecting a 'W' metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail,70 cm above road /ground level, fixed on ISMC series channel vertical post,150x75x5mm spaced 2 m centre to centre ,1.8 m height,1.1 m below ground/road level in cement concrete block(1.10 mx0.30 mx0.30 m) in M-25 grade, all steel parts confirm to IS 1367 and IS 1364 , metal beam rails to be fixed on the vertical post with a spacer for channel section 150x75x5 mm complete as per clause 810 confirming to IS specifications of approved make(TATA/JINDAL/SAIL) including priming and two or more coats of synthetic enemal paint as per the directions Engineer incharge incld all carriages . |
| 102 | Brick work with F.P.S bricks of class designation 75 in foundation and plinth in cement mortar 1: 6 (1 cement: 6 coarse sand), including extra for brick work in superstructure above plinth level up to Floor-V level, including all carriages of material involved upto site of work complete. |
| 103 | Labour charges for Brick work with F.P.S bricks of class designation 75 in foundation and plinth in cement mortar 1: 6 (1 cement: 6 coarse sand), including extra for brick work in superstructure above plinth level up to Floor-V level, including all carriages of material involved upto site of work complete. (Bricks available at site) |
| 104 | Felling trees of the girth (Measured at the height of 1 m above ground level ) including cutting of trunck and branches ,removing the roots and stacking the serviviable material and disposal of unserviceable material. |
| 105 | Beyond 30cm Girth upto and including 60cm girth |
| 106 | Beyond 60cm Girth upto and including 120cm girth |
| 107 | Beyond 120cm Girth upto and including 240cm girth |
| 108 | Above 240cm Girth |
| 109 | Providing and Fixing of Plywood excluding Framework (Frame Work to be paid Seperately) incl all necessary fitting and fixtures. Complete job |
| 110 | 6mm Ply |
| 111 | 10mm Ply |
| 112 | 12mm Ply |
| 113 | 19 mm Ply |
| 114 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge |
| 115 | Providing and fixing of national flag (silk/cotton/khadi) including rope complete job as directed by the engineer in charge |
| 116 | Rent charges for Providing/Laying of excel carpet matting incl. all necessary fixtures complete job |
| 117 | Rent charges for Providing/Laying of irani kaleen carpet matting incl. all necessary fixtures complete job |
| 118 | Providing and Supplying of fresh flower Bouquete. |
| 119 | Providing and Serving of Tea With snacks |
| 120 | Providing & Serving of kehwa with Kulche for VIP’s District officers including hire charges ofCups & accessories |
| 121 | Supply of polythene sheet for insulation (2'-6'' wide) |
| 122 | Supply and installing of CCtv cameras 2 mp of approved brand including required wire complete job @ 3000/ no. |
| 123 | Cleaning of Choked Sewer line /Drain incld removal of unhygenic material beyond Municipal limits. |
| 124 | Raising of Manhole Cover and frame slab to required level incld dismentaling of existing slab and making good the damage as required (Raissing Depth of Manhole to be Paid seperately) Rectangular mainhole 90x 80 Cm with rectangular Cover 600x450 mm of GRade HD -2.5. |
| 125 | Providing and fixing of sign boards/Name plates of different sizes made of 6mm thick P VC sheet with digital computerized letters self adhesive on them in bold form all complete including nails, screws, hanging hooks ,adhesive ,P VC tapes etc. complete job. |
| 126 | Providing and fixing of Plain G.I colour sheet of thickness 0.5mm including cost of nails, screws etc all complete wherever required. |
| 127 | Providing & fixing of vertical/horizontal blind curtains of any colour/pattern of superior quality with G.I Channel pelmet including manual opening and closing arrangements, nails, steel screws all complete. |
| 128 | providing & mixing water proofing compound with cement concrete/cement mortar as specified by manufacturer, of standard make. |
| 129 | Providing and fixing galvanished chicken mesh wire on brick walls, openings including cost of nails, screws. |
| 130 | Providing and fixing Mild steel welded mesh of size 20x20mm wire dia not less than 1.6mm, including cost of red-oxide steel primer and welding charges including steel frame work. |
| 131 | Providing and fixing anti-skid/sand blasted Kota stone 18-20mm thick, laid over 20mm thick cement mortar in 1:3 mix cement mortar including cost of neat cement slurry and joints grouted with cement with matching pigment. |
| 132 | Providing and fixing of colour coated galvanized iron tile profile/Ribbed colour coated iron sheets in roofing 0.50mm thick fixed with J/L hooks or screws etc complete. |
| 133 | Providing and fixing of colour coated iron sheets for rain water gutters of thickness not less than 0.50mm width 150mm depth 100mm minimum at any height fixed with iron brackets, bolts, nuts and washers etc. including making necessary connection with rain water pipe complete. |
| 134 | Providing and fixing of PVC flexible banners of different sizes with computerized digital printing including fixing the same with necessary framing of M.S hollw sections complete job. |
| 135 | Providing and fixing kerb blocks of approved brand and manufactureof size 300x150x150 with mortar of mix1:3 and pointing to each joint with 1:1 mix mortar (for foot paths) |
| 136 | Clearance of blocked cross Drainage pipes including disposal as directed by Engineer incharge at site. |
| 137 | Engagement of manual Skilled/Un-Skilled labous along with equipment like cutters,axe etc complete Labour/Helper. |
| 138 | Carpenter/Mason/Electrician/Welder/Plumber |
| 139 | Repair / Refixing of Disturbed Caution Boards , Signages , refixing Displaced Km stones , Guard stones , Guard Rails. Including of Refixing of misplaced part of board etc |
| 140 | Painting of Km Stones , Kerb stones , Informatory Boards. |
| 141 | Lettering of Km stones |
| 142 | P/F of retro reflective tape 48mm width on poles (different colours) etc , complete job |
| 143 | Construction of 9\\" thick Pedestal of standard design and pattern including fixing of foundation stone of standard size(to be paid seperately) in brickwork 1:6 cement mortar including plastering with cement plaster 1:4 mix, tile work of standard quality on fron and sides only , supported on cement concrete foundation (9\\" depth) of appropriate size resting on 6\\" thick stone soling including excavation, finishing, curing, carriage of materials, all leads and lifts. complete job as per directions of Engineer-in-charge. |
| 144 | Construction /Manufacturing and supply of wooden pedestal made of Russian wood frame work of 2\\"x5\\" of appropriate design, pattern and stability with proper foot rests as per directions of Engineer-in-Charge finished with teak laminated sheet over 12mm thick ply board including necessary beading and nailis, etc for fixng of foundation stone ((to be paid seperately). Incl. carriage back to Departmental store. |
| 145 | Inaugration board |
| 146 | Supply of Granite stone (16mm thk) of appropriate size, colour and of standard quality with necessary engraving and lettering including finishing, all carriage invovled complete job. |
| 147 | Supply of artifical composit marbal/ granite board (16mm thk) as foundation stone of appropriate size, colour and of standard quality with necessary engraving and lettering including fixing in wooden pedestal, finishing, etc. Complete job |
| 148 | P/F of Plastic ready made speed Breaker with heavy duty load capacity black & yellow colors with 50 mm thick 350 mm wide as directed by Engineer incharge including incl cost of cement concrete 1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size) with all carriage etc (complete job). |
| 149 | Instant road patches repairing by way of ready mix pot hole patching premix incl. trench work making proper surface for use (Rectangular & Square patches) incl. compaction complete Job.(cold mix asphalt) road bond or equivalent. As directed by EIC |
| 150 | Hire charges of total station incl Siteplan L-section, x-section, contour,earth work table (Cuttingc& Filling) & other related items complete job |
| 151 | Carriage of material by Mechanical transport from nearest approved source to site of Work Sand avg.lead-15 kms |
| 152 | Aggregate avg.lead-15 kms |
| 153 | Stones avg.lead-15 kms |
| 154 | Bricks for an avg lead of 65 KMs Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 10, 2026
11:30 IST
Tender Published
Tender notice published.
TodaySep 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysSep 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender