Tender For Setting Up Open Gym Inside Kuhs University C Us - Supply, Installation, Testing Andcommissioning Of Open Gym Equipment
Tender Value
5.31 Lakhs
Estimated cost
Bid Submission
17 Sep 2026
2 days left
EMD
13281
Bank guarantee accepted
Document Fee
1254
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thrissur → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Setting Up Open Gym Inside Kuhs University C Us - Supply, Installation, Testing Andcommissioning Of Open Gym Equipment
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 11-Sep-2026 | Changes in tender conditions | Technical Bid | 17-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | supply and installation of Elliptical trainer(safety zone 6x6 ft) made of good qualitysteelMain post : 114mm OD GI PipeSupporting pipe : GI 32& 38mmFoot rest : LLDPEMovements : Smooth bearing movementSafety : No sharp edgesPowder coating : UV 7 tank powder coatingCertification :ISO, EN 16630 and NSIC certificationall complete as per the direction of engineer in charge |
| 2 | supply and installation of abdominal board dual(safety zone 6x6 ft) made of goodquality steelMain post : 50x25x2mm OD GI PipeSit up Back rest : heavy rectangular GI pipeCertification :ISO, EN 16630 and NSIC certificationall complete as per the direction of engineer in charge |
| 3 | supply and installation of standingTwister-double(safety zone 6x6 ft) made of goodquality steelMain Post : 114mm OD GI PipeSupporting pipe : GI 32& 38mmTwister : 2nosMovements :Smooth bearing movementSafety : No sharp edgesPowder coating : UV 7 tank powder coatingCertification :ISO, EN 16630 and NSIC certificationall complete as per the direction of engineer in charge |
| 4 | supply and installation of Air Walker(safety zone 5x4 ft) made of good quality steelMain Post : 114mm OD GI PipeSupporting pipe : GI 32& 38mmFoot Rest : LLDPEMovements :Smooth bearing movementSafety : No sharp edgesPowder coating : UV 7 tank powder coatingCertification :ISO, EN 16630 and NSIC certificationall complete as per the direction of engineer in charge |
| 5 | supply and installation of Cross Walker/Dual ski walker(safety zone-6x6ft)made ofgood quality steelMain frame : 114mm OD GI PipeSupporting pipe : GI 38mmFoot rest : LLDPECertification :ISO, EN 16630 and NSIC certificationall complete as per the direction of engineer in charge |
| 6 | supply and installation of hip shaper made of good quality steelMain frame : 114mm OD GI PipeSupporting pipe : GI 38mmFoot rest : LLDPECertification :ISO, EN 16630 and NSIC certificationall complete as per the direction of engineer in charge |
| 7 | supply and installation of Tai Chi Spinner(safety zone-6x6ft)made of good qualitysteelMain Post : 114mm OD GI PipeSupporting pipe : GI 32& 38mmWheel : 2 nosMovements :Smooth bearing movementSafety : No sharp edgesPowder coating : UV 7 tank powder coatingCertification :ISO, EN 16630 and NSIC certificationall complete as per the direction of engineer in charge |
| 8 | supply and installation of Lat pull (double)(safety zone-8x6ft)made of good qualitysteelMain Post : 114mm OD GI PipeSupporting pipe : GI 32& 38mmSeat & Back res : LLDPEMovements :Smooth bearing movementSafety : No sharp edgesPowder coating : UV 7 tank powder coatingCertification :ISO, EN 16630 and NSIC certificationall complete as per the direction of engineer in charge |
| 9 | supply and installation of Chest press (double)(safety zone-8x6ft)made of goodquality steelMain Post : 114mm OD GI PipeSupporting pipe : GI 32& 38mmSeat & Back res :LLDPEMovements :Smooth bearing movementSafety : No sharp edgesPowder coating : UV 7 tank powder coatingCertification :ISO, EN 16630 and NSIC certificationall complete as per the direction of engineer in charge |
| 10 | supply and installation of leg press dual (safety zone-10x6ft)made of good qualitysteelMain Post : 114mm OD GI PipeSupporting pipe : GI 32& 38mmSeat & Back rest : LLDPEMovements :Smooth bearing movementSafety : No sharp edgesPowder coating : UV 7 tank powder coatingCertification :ISO, EN 16630 and NSIC certificationall complete as per the direction of engineer in charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 11, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 17, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 2 daysSep 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender