Tender For Supply And Installation Of Video Wall Info-Exhibit System For Main Entrance Staircase Of Meity Building
Tender Value
59.48 Lakhs
Estimated cost
Bid Submission
01 Oct 2026
17 days left
EMD
1.18 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply And Installation Of Video Wall Info-Exhibit System For Main Entrance Staircase Of Meity Building
BOQ
| Sl. No. | Item Description |
| 1 | Supply and Installation of Video Wall Info-Exhibit System for main Entrance Staircase of MeitY Building |
| 2 | Supplying, drawing, Installation, Testing and commissioning of CAT6 UTP LSZH 23AWG Twisted Pair Cable in existing conduit/on surface, Category 6 Unshielded Twisted Pair, 4 pair should be complied as per UL/ETL verification program for compliance with ANSI/TIA- 568.2-D standard. Outer diameter should be in the range of 6.1mm nominal with Operating Temperature Range : -5° to +60°C. Bending Radius :<4 X Cable Diameter at –5°C ± 1°C and Pulling Force: 11.5Kg etc. complete as required. |
| 3 | 1 Run of cable |
| 4 | Supplying, Installation, Testing and commissioning of RJ45 Connector for CAT 6/6A Cables. RJ45 modular plug supports 4 twisted pairs, 8 positions, 8 connectors. Housing: PC, UL94V-2, transparent color, Use for 24- 26 AWG stranded wires etc. complete as required. |
| 5 | Supplying, Installation, Testing and commissioning of CAT6 Copper Information Outlet (IO) with face plate of color as per site requirement, should have ETL/UL verification program certificate for compliance with ANSI/TIA-568.2-D. All copper Cable and Components should be from same OEM to maintain compatibility and interoperability etc. complete as required. |
| 6 | Supplying, Installation, Testing and commissioning of following CAT6 Patch Cord should have ETL/UL verification program certificate for compliance with ANSI/TIA-568.2-D etc. complete as required. |
| 7 | Copper Patch Cords of length 1m (3ft) |
| 8 | Supplying and drawing following core Fiber Optic Cable having corrugated steel armoring. The Fiber should be SM Fiber Central-loose tube filled with Thixotropic jelly, duly following Standards: ISO 11801, IEC 60793- 1/60794-1-2, ITU-T-REC G.652D and Telecordia GR-20-core, High quality Electro Chromium Coated Corrugated Steel tape (ECCS) and HDPE- Sheath, Operating ambient Temperature should be – 5 0 C to +50 0C and Storage Temperature shall be – 5 0C to +50 0C, Max Attenuation ± 0.36 (db/km) at Operational Wavelength 1310 nm and ±0.22 db/km at Operational Wavelength 1550 nm. type of fiber should be 9/125 /G.652D & Refractive Index should be 1.4670/1.4675. The value for Mode- filed, Cladding Diameter 9.2 ± 0.4 μm and 125 ± 0.7 μm correspondingly. The Dispersion value < 3.5 < 18 ps/nm-km and PMD value < 0.2 ps/km and Cable Cutoff wavelength < 1260 nm i/c splicing & marking etc complete as required.Single Mode 6 Core Optical fiber cable |
| 9 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 10 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 11 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
| 12 | Hot finished welded type tubes |
| 13 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an evenshade : |
| 14 | Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture |
| 15 | Supplying, Installation, Testing Commisioning of IP 65(front & rear both) Outdoor LED Video Wall Die casting aluminium body i/c controller and power distribution switch based on fan less technology with following Specifications and with three years warranty:-Pixel Pitch:- 4 mm or better.Contrast Ratio:- 5000:1 or better.Viewing Angle:- 160 ° x 160° deg or better.Refresh Rate > = 3840 Hz or better.Cabinet size:- 960mm(W) x 960mm (H) or as perOEM.Brightness max, callibration on (cd/m2)- 6000 Nit or better.Operating temprature/humidity (dg F/C) :- 0° to 55°.Including compatible video controllers and Software / LicenseVideo wall should be operated through existing PC/Laptop/IP LAN port or through android/IOS supported application provided at site.The display shall be fixed on new MS support as per robust design duly approved by OEM and department to sustain the weight of LED wall and wind pressure and complete with all safety requirements i/c painting etc. as reqd at site. (Following size of LED Wall shall be installed at different places as per approved and required dimensions). Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysOct 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender