Tender For Addition / Alterations And Special Repair To Drdo Guest House (Bldg No.P-189) At R&De (Engrs) Dighi, Pune
Tender Value
65.04 Lakhs
Estimated cost
Bid Submission
05 Oct 2026
21 days left
EMD
1.30 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addition / Alterations And Special Repair To Drdo Guest House (Bldg No.P-189) At R&De (Engrs) Dighi, Pune
BOQ
| Sl. No. | Item Description |
| 1 | CIVIL WORKSDismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. |
| 2 | For thickness of tiles 10 mm to 25 mm. |
| 3 | For thickness of tiles above 25 mm. |
| 4 | Providing and laying vitrified floor tiles in diferent sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600 x 600mm |
| 5 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. |
| 6 | Kota stone slab flooring over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigments to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1:4 ( 1 cement : 4 coarse sand ). 25mm thick |
| 7 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab of colour black, Cherry/Ruby red . Area of slab upto 0.50 sqm |
| 8 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.. Granite work. |
| 9 | Dismantling aluminium/ Gypsum partitions, false ceiling including disposal of unserviceable surplus material and stacking of serviceable material out side the campus lead as directed by Engineer-in-charge. |
| 10 | Providing and fxing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, .the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer’s specification and also including the cost of making openings for light fittings, grills, difusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : |
| 11 | 15 mm thick tapered edge gypsum mosture resistant board. |
| 12 | Dismantling of Existing Roof Treatment and and removal of debris from out side the defence land |
| 13 | Material and labour for 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) over PCC (while concrete is green) using approved liquid water proofing Note: supply of liquid water proofing compound will measured and paid seperately and dosage as per manufacturer instructions complete all as specified and directed |
| 14 | Supply only liquid water proofing compoud complete all as specified and directed. |
| 15 | PREPATORY WORKS : Thorough cleaning work, removal of loose screed, repairing the damaged portions and filling any minor potholes with polymer modified mortar using Fosroc Nitobond SBR Latex mixed with cement and quartz sand in the ratio of 3 litres per bag of cement. 'Providing and laying coving at the junction of slab and vertical offsets with Cement Mortar 1:4 and admixed with Nitobond SBR Latex at dosage of 3 Ltrs per 50kg of cement as per manufacturer's specification. Filling the annular space between concrete surface and rain water PVC pipe using non shrink grout after preparing the surface using sand paper and application of Nitobond SBR Latex as a priming coat on the concrete walls. Mixing and pouring Conbextra GP2, high strength grout with clean and cool water at ratio of 0.16 on the prepared surface to make the bore packing water tight. The rate shall include necessay materials, tools and application procedure as per manufacturer's specificationWATERPROOFING COATINGPorous concrete surfaces to be primed with Nitoproof WB primer. Providing and applying Fosroc Nitoproof 600 PF of Fosroc chemicals a single component pitch free polyurethane based coating that cures by reaction with atmospheric moisture to form a tough but flexible waterproofing membrane. It is elastomeric, seamless waterproof membrane applied in 2 coats to achieve DFT 1.5 mm thick having a elongation capacity of over 600% . Termination to be done on wall extending the coating to min.300mm height above the finished floor level and sealed inside the groove of 20mm wide x 10mm thick flushed with polymer modified mortar as per vendor recommendation. Laying 200gsm non woven geo textile membrane over Nitoproof 600 PF coating with overlap sealed using synthetic rubber adhesive before providing screed concrete.The material shall achieve following properties: Elongation (ASTM D412) : 600 %, Specific gravity : 1.50 + 0.1 g/cc, Solid content : 85% min., Tensile strength (ASTM D412): 2.5 N/mm2, Crack bridging (ASTM C836) > 2mm Tear resistance (ASTM D624) : 15 kN/m, Water vapour transmission(ASTM E96) : 0.6 g/m²/hr., Water permeability @ 5 bar : Nil, Shore A hardness (ASTM D2240) : 60, Adhesion in-peel test (ASTM C836) > 50N |
| 16 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-incharge (Door handle, lock and stopper etc.to be paid separately). |
| 17 | Supply and Fixing 12 mm thick toughened fixed glass to close the opening of any shapes and sizes of make - Modiguard & Assie Glass,or equivalent fixed PVC Gasket and weather sealent of DOW SIL 688 & 789 including necessary accessories scaffolding and testing etc as per manufacturers instructions. |
| 18 | Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately. |
| 19 | Three track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body.Using R4 series with frame (115mm & above) x (45mm & above) & both glazed and fly screen sash (44mm & above) x (55mm & above) with zinc alloy (zamak) powder coated handle on every glazed panel along with multi-point locking system. |
| 20 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below. |
| 21 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS : 3818 marked with necessary screws |
| 22 | Providing and fixing 1.5mm thick decorative high pressure laminated sheet plain/ wood grain in gloss/mat/seude finish with high density protective surface layer and reverse side of adhesive bonding conforming to IS:2046 type S including cost of adhesive of approved quality |
| 23 | Providing and fixing of Modular Kitchen made out of 18 mm thick HDMR on BSL of aproved colour shade divider, back covered with 6 mm thick HDMR (BSL), the Basket made out of ready made 304 grade Stainless steel Modular Kitchen basket and accessories such as right angle basket (Plain, Cup & Saucer, Plant, Partition, Bottle rack, Thali, Cutlery) kitchen utensil basket, Dinner Set basket, kitchen grain basket, Multipurpose basket as per site requirement including finishing (wherever required) and fittings. The same shall be fixed with necessary stainless steel nuts & bolts, Stainless steel screws & telescopic channel etc. as per direction of Engineer -in-Charge, weight of stainless steel basket shall be considered excluding weight of all fixing accessories such as nuts, bolts, fasteners telescopic basket channel etc. front facia covered with HDMR wirh 1 mm thick laminate of approved pattern as per direction given by Engineer-in-Charge, all exposed edges covered with 2 mm thick PVC edge banded tape with necessary glue. All fittings are including like handle, channel, screws, soft close hinges etc. nothing will be paid extra |
| 24 | Providing and fixing 300 mm deep modular over head cabinet made out of 18 mm thick HDMR (BLS) on side shelves and back covered with 6 mm thick HDMR (BSL) front facia 18 mm thick HDMR with 1 mm thick laminate of approved the pattern, all exposed edge covered with 2 mm thick PVC edge band tape with necessary glue. All fittings like handle, soft close hinges etc. are including nothing will be paid extra. |
| 25 | Supply and fixing of Kitchen Chimney having Air section capacity 1500 CMH . Filter Material made of Stainless steel with baffle filter type wall mounted all as approved by Engineer-in-charge. |
| 26 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 27 | Providing and fixing G.I Pipes complete with G.I fittings and clamps i/c making good the walls etc concealed pipe including painting with anti corrosive bitumastic paint, cutting the chases and making good the wall |
| 28 | 15mm dia nominal bore |
| 29 | 20mm dia nominal bore |
| 30 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. |
| 31 | 15 mm nominal bore |
| 32 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 |
| 33 | 15 mm nominal bore |
| 34 | Providing and fixing 15 mm nominal dia each CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. |
| 35 | Providing and fixing bevelled edge mirror of size 600mmx450mm with 6mm tk hard board at back and PVC moulded frame including all CP screws, etc complete |
| 36 | Providing and fixing bright finished brass butt hinges of sizes 125 x 85 x 5.5 mm (Heavy type) with necessary SS screws |
| 37 | Providing and fixing bright finished brass towes bolt of sizes 200 x 10 mm (barrel type) with necessary screws |
| 38 | Providing and fixing bright finished brass 100mm mortice door latch and lock with 6 levers and a pair of lever handle with necessary screws. |
| 39 | Providing and fixing 125mm bright finished brass handles with necessary screws |
| 40 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer |
| 41 | 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. |
| 42 | Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms. |
| 43 | Providing and fixing 150 mm diameter C.P. brass shower rose with 15 or 20 mm inlet |
| 44 | Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in- charge. |
| 45 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Circular tank |
| 46 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge. |
| 47 | With cement mortar 1:4 (1cement: 4 coarse sand) |
| 48 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. |
| 49 | In cement mortar |
| 50 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 51 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: |
| 52 | G S Sheet |
| 53 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 54 | 0.63 mm thick with zinc coating not less than 275 gm/m² |
| 55 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 56 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 57 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : |
| 58 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture |
| 59 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: |
| 60 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 61 | Material and Labour for Rendering 12 mm Cement Plaster of mix cement mortar 1:4, complete all as specified and directed (1 cement : 4 fine sand). |
| 62 | Finishing walls with Acrylic Smooth exterior paint of required shade : |
| 63 | New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 64 | Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. |
| 65 | Providing and fixing toilet paper holder : |
| 66 | C.P. brass |
| 67 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 68 | 32 mm dia |
| 69 | Providing and fixing washable wallpaper as per approved design and pattern. |
| 70 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. |
| 71 | Demolition of Precast RCC Jali of 50 mm thick. |
| 72 | Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 6mm nominal size ), reinforced with 1.6 mm dia mild steel wire, including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine sand) etc. complete, excluding plastering of the jambs, sills and soffits. |
| 73 | 50 mm thick |
| 74 | Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge : |
| 75 | In Cement Mortar |
| 76 | Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like. |
| 77 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 78 | Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) : |
| 79 | Raised and cut pointing |
| 80 | Supply and fixing of S.S mat finish boxup letter 1 inch thick of following description at ACP sheet TMX-126 Metalic Grey surface includingback light and all accessories etc :- |
| 81 | English Words :- Minimum Height of English words should be 10 inch (Top to bottom height) |
| 82 | Supplying, Installation, testing and commisioning of 10 W LED Bollard Light. Make- As per direction of Engineer-in-Charge. |
| 83 | Supply, installation, testing and commissioning of following LED fittings complete with electrical connections, fixing & mounting accessories. All the fittings to be supplied with lamps. |
| 84 | 42 W LED Post Top Letern Fitting/Gate Light. (Equivalent to Crompton Maple LPTO-40-Watt Post Top Lantern) |
| 85 | 18 W Recessed/Surfaced type LED Ceiling light of approved Make as per Selection of Engineer in Charge or his rep.(Approved Make Wipro, Phlips, Crompton or Equivalent) |
| 86 | Supplying, Installation, testing and commissioning of Aluminium Armoured Cable of 3 Core 6 sqmm Flexible Cable. Make- Polycab/Finolex etc. |
| 87 | Supply and fixing of high speed Wall mounted fan with 450 mm sweep size and 1400 RPM of make - Cropmpton, Bajaj , Havells or as approved by Engineer-in-Chrage. |
| 88 | Supply and fixing of high Speed Pedestal fan with 450 mm sweep size and 1400 RPM of make - Cropmpton, Bajaj , Havells or as approved by Engineer-in-Chrage. |
| 89 | Material & Labour for Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, joinnted with eat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse Sand). |
| 90 | Dark Shade Pigment using Ordinary Cement |
| 91 | Supply and fixing of designer Reception Counter of 1050 mm height made out of 18mm MR grade plywood cladded with 1 mm laminate / 4 mm thick teak veneer for front, top, sides and one No. of storage unit to have one drawer and one shutter having shelf with locking arrangement and key board pull out tray, all exposed edges to have teakwood beading, all hardware fitting in S/S finish with DRDO logo, all exposed surface with melamine polish etc. complete all as per drawing and as directed by Engineer-in-charge. |
| 92 | Supply of Revolving & tilting chair of superior quality of size 515 x 515 x 900 mm high having moulded 12 mm hot pressed ply with 60 mm thick high density PU seat and back duly covered with approved quality of leatherrite, having extra padding of seat and back alongwith arms mounted on five castors pedestal with gas lift arrangement etc all complete all as approved by Engineer-in-Charge. |
| 93 | SCHEDULE OF CREDIT |
| 94 | Old Wash Hand Basin |
| 95 | Old unserviceable Building/grills/Gates Steel (Iron Scrap) |
| 96 | Wooden shutters of any description |
| 97 | Old Toilet Paper Holders, Health Faucet |
| 98 | Taps of any size |
| 99 | Poly water storage tank |
| 100 | GI pipes of any dia |
| 101 | Old Brick |
| 102 | Old Stone Masonry |
| 103 | Old GS Sheet Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysOct 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender