Tender For Lwss Dhar Rudhal In Gp Sewra Chandi Tehsil Arki District Solan Hp Sh Supply And Errection Of 10 Hp Submersible Pumping Machinery Providing Laying And Jointing Of Rising Main Gi Pipe 32Mm Dia L From 1St Stage Pump House To Village Gaur Kuff
Tender Value
Ref. Documents
Estimated cost
Bid Submission
21 Sep 2026
8 days left
EMD
22500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Solan → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Lwss Dhar Rudhal In Gp Sewra Chandi Tehsil Arki District Solan Hp Sh Supply And Errection Of 10 Hp Submersible Pumping Machinery Providing Laying And Jointing Of Rising Main Gi Pipe 32Mm Dia L From 1St Stage Pump House To Village Gaur Kuffer, Dhar Etc. In 1St Call Under Dmft
BOQ
| Sl. No. | Item Description |
| 1 | Providing and Installing submersible pump of 10.00 HP confirming to ISS 8034-1976 along with a directly coupled submersible type squirrel cage electric induction motor suitable for operation on 440-V-3 phase 50 CPS AC supply with water lubricated bearings, provided with pivoted segment type thrust bearings to with stand vertical pressure with minimum wear and tear and with device to take up the expansion of water with heating of motor complete in all respects including entire carriage of materials upto all leads and lifts complete in all respect. Discharge :- 1.50 LPS ,Total Head=205 mtrs ,Dai of Risaing main :- 32 mm Dia ,Length of Rising Main :- 1245 mtrs , Pumping Hours :- 4 Hours . Pumping Machinery = 2x10 HP |
| 2 | Supply and fixing rope wire 4 mm2 dia suitable to wear the weight of submersible motor pumps set and G.I pipe etc complete in all respects. |
| 3 | Providing and fixing copper submersible insulated armored cable 4.00mm2 or suitable size and capacity to and all other electrical equipment as per IS 1554(P-I) 1988 or latest amendment of Siemens/ Gloster/ National/ EICO/ Grandly / Havells make complete in all respects. |
| 4 | Providing and fixing suitable DOL starter of MEI/Kilburn/Jyoti/Siemes/L&T make as per IS 8544-1979 with up to date amendments for squirrel cage/slipring motor mounted on panel board with magnetic type overload release and dashpot,time lag under voltage release with or without intial oil fillings as the case may be with single phase prevent or as per IS 248(P-V)1983 with upto date amendments complete in all respect. |
| 5 | Supply and fixing of supporting clamps of suitable size to weir the weight of submersible pump set complete in all respect. |
| 6 | Providing and fixing M.S sheet steel fabricated floor mounted closed(Almirah type) switch board including angle iron posts of suitable height and size ISA 40x40x6mm duly painted with steel sheet of 16 gauge comprising capable of mounting the accessories with all materials connections complete in all respects. |
| 7 | Supply and fixing of MONOCRISTALLINE PV MODULE HAFT CUT LUBI BARAND 545 WATT with 10 PCS and VFD drive mppt based ,LUBI BRAND with all leads and lifts all satifactions of Engineer-in Charge. |
| 8 | Excavation drain & channels etc. earth all classification of earth work such as pick work jumper work with in all leads and lifts including trimming and dressing of sides, leveling of beds to correct grade including shoring strutting, planking , timbering and dewatering wherever required , stacking usable and unusable material/ soil separately and after laying jointing and testing pipes, returning the usable soil in 15 Cm layers by ramming and watering and then desposing of all surplus excavated earth as directed within a leads of 20 mtr in pick Jumper work 50 % each in all leads and lifts as per the satisfaction of Engineer in Charge. |
| 9 | Providing and fixing of 32 mm dia GI Rising Main Pipe(L) plain ended as per upto amendmnets elctric resistance welded completes in all respects. |
| 10 | P/F double flanged swing type cast steel reflex valve of kartar/Leader/ BHEL/Kirloskar Kilbar/ Kartar valve/Fouress make and of 32 mm dia having bye pass arrangement on the delivery line of the pump of capable of withstanding the normal sheet pressure as per IS-5312-1984 (P-I) with upto date amendments. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysSep 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender