Tender For Ener Of Hand Pump At Village Koon In Gp Mangoo In Tehsil Arki District Solan Hp Sh Construction Of Filter Bed Cum Collaction Tank Construction Of Boundary Wall With Fencing Around The Source And Providing Laying And Jointing Of G.I Pipe Va
Tender Value
Ref. Documents
Estimated cost
Bid Submission
21 Sep 2026
6 days left
EMD
24720
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Solan → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Ener Of Hand Pump At Village Koon In Gp Mangoo In Tehsil Arki District Solan Hp Sh Construction Of Filter Bed Cum Collaction Tank Construction Of Boundary Wall With Fencing Around The Source And Providing Laying And Jointing Of G.I Pipe Various Dai In Distribution System At Village Koon And Baryal Under Dmft 1St Call
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundations,trenches etc., in earth work, lift upto 1.50 mts. Stacking the excavated soil not more than 3 mts. Clear from the edge of the excavation & then returning the stacked soil in 15 cms. Layers,when required into plinths sides of foundation etc.,consolidating each deposited layers by ramming & watering & then disposing of all surplus excavated earth as dierected within all leads & lifts as per entire satisfaction of Engineer in charge. |
| 2 | Providing and laying cement concrete 1:4:8 (1 cement: 4 sand: 8 graded stone aggregate 40mm nominal size) excluding cost of centring & shuttering in. |
| 3 | Foundation and Plinth. |
| 4 | Providing and laying cement concrete 1:1½:3 (1 cement: 1½ sand: 3 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in. |
| 5 | Foundation footings bases of columns and the like and mass concrete. |
| 6 | Walls (any thickness but not less than 0.1m) including attached pilasters, buttresses, plinth and string courses etc. from top of foundation level upto floor two level) |
| 7 | iii) In columns, pillars,posts and strutus square, rectangular or polygonal in plan including all leads and lifts complete in all respect |
| 8 | Providing form work with steel plates 3.15mm thick welded with angle iron 30x30x5mm so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden batten and ballies, height of propping and centering below supporting floor to ceiling not exceeding 4 metres and removal of the same for insitu reinforced concrete & plain conrete work in. |
| 9 | i) Flat surfaces such as soffits of suspended floors, roofs, landings & the like. (Floors upto 200mm th.) |
| 10 | ii) Vertical surfaces such as walls (any thickness) partition and the like including attached pillasters, buttresses, plinth and string courses and the like. |
| 11 | iii) In columns, pillars,posts and strutus square, rectangular or polygonal in plan including all leads and lifts complete in all respect |
| 12 | Providing and laying cement concrete work 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in. |
| 13 | Suspended floors, roofs, landing and shelves and their support, balconies, beams, girders, bressumers and cantilever upto floor two level. |
| 14 | Providing mild steel/tor steel reinforcement for RCC work including bending, binding and placing in position complete upto floor two level. |
| 15 | Providing and laying no fine concrete 1:4(1 Cement :4 stone aggregate 20mm nominal size) and curing complete excluding cost of form work within all leads and lifts complete in all respect. |
| 16 | Providing and laying cement conc . 1:5:10 (1 cement ,5 sand ,10 graded aggregate water bone aggregate 40mm nominal size) and curring complete excluding cost of form work in retaning walls breast wall as per H.P.W.D specification with in all lead and lift and as per direction and satisfaction of Engineer in charge . |
| 17 | Brick Masonry in common burnt clay building bricks in cement Motor 1:6 (1 Cement ; 6 Sand) in 2nd class bricks.including carriage of materials upto all leads and lifts complete in all respects. |
| 18 | Provding Fixing & Manufacturing MS Gate l made of MS flat 50mmx6mm 2.50x1.50mtrs. |
| 19 | Provding Fixing & Manufacturing Fencing Panel made of MS Angle40x40x5mm with MS flats 20mm. 1.80x1.20mtrs. With wire Jali 25x25mm . |
| 20 | 20 mm Cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering upto floor two level including arrises.internal rounded angles,chamfers and /or rounded angles not exceeding 80 mm in girth and finished even & smooth in CM 1:6 (1 Cement : 6 Sand) |
| 21 | White washing with lime on Undecorated wall surfaces. |
| 22 | Finishing wall with water proofing cement paint of approved brand &manufacture & of required shade on undecorated wall surfaces (Two coats) to give an even shade after thoroughly brushing the surface to remove all dirt & remains of loose powdered materials. |
| 23 | Excavation drain & channels etc. earth all classification of earth work such as pick work jumper work pumping out water blasting softs /hard work in all same where blasting is prohibited in all leads and lifts as per the satisfaction of E-in-charge. |
| 24 | Providing,Laying, jointing and testing in trenches GI pipe confirming to ISI specification i/c commissioning complete in all respect of following dia in distriabution (earth work in trenches shall be measured and paid for separately) including all leads and lifts as per the direction & satisfaction of E-in-charge. |
| 25 | 15 mm dia (L) |
| 26 | 20 mm dia (L) |
| 27 | 25 mm dia (L) |
| 28 | 32 mm dia (L) |
| 29 | 40 mm dia (L) |
| 30 | Providing and fixing of gate valve of Gun metal as per entire satisfaction of Engineer-in-charge. |
| 31 | 15 mm dia |
| 32 | 20 mm dia |
| 33 | 25 mm dia |
| 34 | 32 mm dia |
| 35 | 40 mm dia Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysSep 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender