Tender For Nabard-Nabard Ridf-Xxx-Development,Upgradation And Associated Infrastructure Works Of Chettuva Fishing Harbour-Refurbishment Of Existing Structures In Chettuva Fishing Harbour-Nabard Ridf-Xxx-Development,Upgradation And Associated Infrastr
Tender Value
66.29 Lakhs
Estimated cost
Bid Submission
28 Sep 2026
18 days left
EMD
50000
Bank guarantee accepted
Document Fee
2760
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thrissur → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Nabard-Nabard Ridf-Xxx-Development,Upgradation And Associated Infrastructure Works Of Chettuva Fishing Harbour-Refurbishment Of Existing Structures In Chettuva Fishing Harbour-Nabard Ridf-Xxx-Development,Upgradation And Associated Infrastructure Works Of Chettuva Fishing Harbour-Refurbishment Of Existing Structures In Chettuva Fishing Harbour- Phase I-General Civil Work-1
BOQ
| Sl. No. | Item Description |
| 1 | Description of items (DAR) |
| 2 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes |
| 3 | 10.16.2:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished seamless type tubes |
| 4 | 13.48.1:Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm |
| 5 | 13.52.1:Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work |
| 6 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work |
| 7 | OD1924/2026-2027:Providing corrugate G.I./ Aluminium tile profile roofing sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on verlapping of sheets complete ( up to any pitch in horizontal / vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and Shape wherever required.1.00 mm thick with zinc coating not less than 275 gm/m2Based on data 12.1.1Considering a roof with each sloping side 18.09 x 5.10 m and the slope being flatter than 1 vertical to 2.5 horizontal.Area of roof = 2x18.09x5.1 = 184.518 sqmMATERIAL:C.G.S. sheets 2x27 = 54 Nos. of size 2.5x 0.9 metre @ 19.35 kg each = 1044.90 kg.2x27 = 54 Nos. of size [email protected] kg each = 1170.18 kgTotal = 2215.08 kg.+Add 5% Wastage = 110.75 kg.Total = 2325.83 kg.23.26 quintals |
| 8 | OD1960/2026-2027:PPGL roofing sheets conforming to IS 15965:2012, trapezoidal profile, made from pre-painted galvalume steel with minimum AZ150 (150 GSM) coating, 0.60 mm base metal thickness (BMT), tensile strength 550 MPa, coated with Regular Modified Polyester (RMP) paint system with 20-25 microns top coat and 7-10 microns bottom coat, having overall width 1100 mm and effective cover width 1000 mm (accounting for side lap of one corrugation), pitch 200 mm, supplied in required lengths without end laps, and fixed with self-drilling screws with EPDM washers, including all necessary accessories, complete as per specifications and direction of Engineer-in-charge. |
| 9 | OD1963/2026-2027:Providing and fixing ridge capping fabricated from 0.60 mm base metal thickness (BMT) PPGL sheet conforming to IS 15965:2012, made from pre-painted galvalume steel with minimum AZ150 (150 GSM) coating, tensile strength 550 MPa, coated with Regular Modified Polyester (RMP) paint system with 20-25 microns top coat and 7-10 icrons bottom coat, having developed width 500-600 mm, formed to required profile, fixed with self-drilling screws with EPDM washers including necessary overlaps, sealing, utting and bending, complete as per specifications and direction of Engineer-in-charge.Details of cost for 28.40 metre MATERIAL: one piece plain ridges Consider a shed of 28.4x9.4 m (external dimensions). |
| 10 | 50.12.2.1:Providing & fixing Poly carbonate corrugated sheet 0.8 mm thick as approved by the Engineer in charge and should be supplied in a single length of 12 M or as decide by the Engineer in charge. The sheets shall be fixed using self drilling / self tapping screw of size (5.5x55 mm) with EPDM seal complete upto any pitch in horizontal/ vertical/ curved surface, but excluding the cost of purlins, rafters, trusses, and including cutting to size shapes where ever required. |
| 11 | OD1990/2026-2027:Based on 12.7.1_Providing and fixing 15cm wide, rectangle PVC sheet gutter with iron brackets 40x3 mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete.0.80 mm thick with zinc coating not less than 275 gm/m2 (Details for 15 cm PVC gutter) |
| 12 | OD1989/2026-2027:Based on 12.7.1_Providing and fixing 20 cm wide, rectangle PVC sheet gutter with iron brackets 40x3 mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete.0.80 mm thick with zinc coating not less than 275 gm/m2 (Details for 20 cm PVC gutter) |
| 13 | 10.20:Providing and fixing bolts including nuts and washers complete. |
| 14 | OD1573/2026-2027:Providing fly proof net in the sides and ceiling of shade provided in front of new auction hall using nylone net details for 10m2 |
| 15 | 13.7.2:12 mm cement plaster finished with a floating coat of neat cement of mix:1:4 ( 1 cement : 4 fine sand) |
| 16 | 13.8.2:15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix:1: 4 ( 1 cement : 4 fine sand) |
| 17 | 8.2.1.1:Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Raj Nagar Plain white marble/ Udaipur green marble/Zebra black marbleArea of slab upto 0.50 sqm |
| 18 | 8.31:Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 19 | 50.6.1.1:Solid block masonry using pre cast solid blocks ( factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part 1 of 1979 for foundation and plinth with thickness 20 cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete |
| 20 | OD1794/2026-2027:Engaging Coolie |
| 21 | OD1795/2026-2027:Engaging Sewer man for cleaning soak pit |
| 22 | OD1796/2026-2027:Engaging Electrician for attending petty repair works |
| 23 | OD1810/2026-2027:Engaging Carpenter |
| 24 | OD1797/2026-2027:Engaging Fitter Grade 1( Pipe fitter/Plumber) for attending petty repair works |
| 25 | 60.7.1:DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site |
| 26 | 60.7.6:Supplying and stacking granite stone 20 to 45 dm3 for dumping works- Supplying at site of work granite stone 20 to 45 dm3 in size (60% 45m3,30%30 to 40dm3 and 10% 20 to 30dm3 stones) for measurement ( deducting not less than 15% for voids as fixed by the departmental officer at site) including all cost, conveyance, loading and unloading charges all other incidental charges all leads and lifts etc. complete as per the direction of the departmental officers at site. |
| 27 | 60.39:Unified Data for A.S.E works - Dumping in position 20 to 45 dm3 in size (60% 45dm3,30% 30 to 40dm3,10% 20 to 30 dm3) to lines and levels to form the core of the sea wall as per the approved design |
| 28 | 65.7:Hydraulic excavator |
| 29 | 4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 30 | 5.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 31 | 5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more |
| 32 | 5.1.3:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 33 | 5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete |
| 34 | OD1889/2026-2027:Supplying and fixing fender using lorry tyres including all cost of conveyance and fitting charges |
| 35 | 15.12.2:Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area beyond 3 sq. metres |
| 36 | 50.9.1.1:Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack wood |
| 37 | 50.9.2.3:Providing and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows, 35 mm thick shutters including ISI marked M.S pressed butt hinges bright finished of required size with necessary screws, excluding paneling which will be paid for separately, all complete as per direction of Engineer in -charge. using Vengai wood |
| 38 | 9.48.2:Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc |
| 39 | 9.53:Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 40 | 9.100.1:Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:125 mm |
| 41 | 9.72.3:Providing and fixing bright finished brass butt hinges with necessary screws etc. complete:100x85x5.5 mm (heavy type) |
| 42 | 9.72.5:Providing and fixing bright finished brass butt hinges with necessary screws etc. complete:75x65x4 mm (heavy type) |
| 43 | 50.9.15.5:Providing and fixing iron hooks and eyes: 100 mm |
| 44 | 50.18.7.4.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 10Kgf/cm2- Internal work - Exposed on wall |
| 45 | 50.18.8.3.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 25 mm pipe 10kgf /cm2 |
| 46 | 50.18.8.8.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 75 mm pipe 6 Kgf/cm2 |
| 47 | 50.18.8.9.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chased and making good the wall etc. 110 mm pipe 6kgf/cm2 |
| 48 | 50.18.9.6.1:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 50 mm dia 10Kgf/cm2 |
| 49 | 18.54.3:Providing and fixing PTMT bib cock of approved quality and colour.15 mm nominal bore, 165 mm long, weighing not less than 110 gms |
| 50 | 21.17:Providing and fixing anodised aluminium grill ( anodised transparent or dyed to required shade according to IS : 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge.(Only weight of grill to be measured for payment ). |
| 51 | OD1959/2026-2027:Providing fly proof net in the sides and ceiling of shade provided in front of new auction hall using nylone net (departmental material) details for 10m2 |
| 52 | 13.105:Re-lettering with black Japan paint of approved brand and manufacture. |
| 53 | 15.28.2:Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :Asbestos cement Sheet Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 10, 2026
11:30 IST
Tender Published
Tender notice published.
TodaySep 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysSep 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender