Tender For Repair And Replacement Of Filteration Plant Of Swimming Pool And Allied Works At Mil Stn Raiwala Under Age (I) Raiwala
Tender Value
4 Lakhs
Estimated cost
Bid Submission
30 Sep 2026
18 days left
EMD
8000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dehradun → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Replacement Of Filteration Plant Of Swimming Pool And Allied Works At Mil Stn Raiwala Under Age (I) Raiwala
BOQ
| Sl. No. | Item Description |
| 1 | M&L for Complete overhauling, repair and recommissioning of existing filtration units of the filteration plant of swimming pool of capacity 44000 gls/ hrs including taking down and refilling of filter media(gravels of different size) of each stage after proper washing/cleaning and filling of new Filter sand including replacement of defective nozzles complete all as specified and directed consisting of the following operations :-. Opening the man hole top cover of filteration dome, removal of existing exhausted filter media from the vessal, cleaning and scrubbing the internal surface of vessal to make the surface smooth, welding of damaged plates and painting two coats of food grade black bituminous paint on inner side of vessal complete all as specified and directed. Repairing and cleaning under drain water distribution system in the bottom of the vessal cleaning all as specified and directedFilling of washed / cleaned filter media in different layers as directed of under mentioned sizes :-(bottom to top) (i) Pobbles size 6mm to 12mm in mass thickness 100mm complete all as specified and directed. (ii) Gravels size 3mm to 6mm in mass thickness 100mm complete all as specified and directedPainting external surface of entire filter, booster pumping set and connected pipes, pipe line inside the swimming pool bldg with one coat of synthetic enamaled paint complete all as specified and directed. Note :- Filter sand and strianer nozzles will be measured and paid as per revelant schedule |
| 2 | Supply only Coarse filter sand size 1.2mm to 2.5mm in mass thickness 600mm complete all as specified and directed. |
| 3 | Supply only polyurethene strainer nozzles thread type (as per existing samples) |
| 4 | Overhauling and repairing to Monoblock centrifugal pumping set of capacity 10 HP 440 V 50 Hz 3 Phase with connected accessories to put the plants in perfect working condition and testing as test sheet given by Engr-in-Charge, aligning CF pumps and motor incl balancing of motor, varnishing of stator,winding with original winding copper wire as suitable as per model and painting of entire pump set with two coats of synthetic enamel paint incl preparation of surfaces as reqd, renewal of nuts, bolts and washers, renewal of gland and seats, greasing and oiling and renewal of unserviceable parts incl follwing spare parts :- Supply and fixing gland packing of req sizeSupply and fixing of Gun metal bushes of reqd sizeSupply and fixing bearing of suitable sizes for pumps |
| 5 | M&L for overhauling and repair of air compressor rotary key blower type with motor complete all as specified and directed. |
| 6 | S&F in replacement of suction sweeper assembly 24\\" long complete with Nylone brush, PVC wheels, 50/40 mm NRV suitable for Suction Sweeper . |
| 7 | Supply and fix in replacement of unserviceable sluice valve cast iron with Stainless steel PN-1.6 and fly nut flanged both ends and drilled for jointing wheel head type conforming to IS 14846 including two flanged joints with nuts bolts and washers rubber insertion packing etc for 150mm bore pipe as in repairs and ISI marked complete all as specified and as directed. |
| 8 | Material and labour for burning out lead in position and jointing to cast iron pipe of size 200 mm bore spigot and socket by run lead joints including spun yarn and caulking of lead joints complete all as specified and as directed by Engineer-in-charge |
| 9 | All as per above item No 8 here-in-before but 150mm bore |
| 10 | All as per above item No 8 here-in-before but 100mm bore |
| 11 | All as per above item No 8 here-in-before but 80mm bore |
| 12 | Excavation in trenches in hard /dense soil n.exe 1.5 mtr wide and n.exe 1.5 mtr in depth for foundation laying of pipe etc n.exe 10 sqmm on plan and n.exe 1.5 mtr in depth and getting out complete all as specified and as directed by Engineer-in-charge |
| 13 | Returning filling in including spreading levelling watering and well ramming in layers not.exe 25cm each layers complete all as specified and as directed by Engineer-in-charge |
| 14 | Removal of excavated material & surplus spoil to a distance n.exe 50 mtr and depositing where directed at a level not exe 1.5 mtr above the starting point complete all as specified and as directed by Engineer-in-charge |
| 15 | Supply and fixing sub main wiring four single core 4 Sqmm PVC insulated unsheathed stranded copper conductor cable (FRLSH) 1100 volts graded drawn in for three phase and one for netural & including rigid PVC conduit 25 mm dia or more medium grade concealed in wall as per existing along with 4. Sqmm PVC insulated unsheathed copper conductor cable (FRLSH) as earth wire connected with main earth dolly including cutting chassing and making good disturbed portion all as specified and directd. Note: Four runs of phase, netural wire and one run of earth wire and PVC conduit will be measured as one RM or one length. |
| 16 | Dismantling and taking down u/s sub-main wiring/service wire of any size including wooden batten / PVC Conduit etc and making good the disturbed surfaces of wall/floor to match with the existing wall/floor etc all as specified & as directed. Note :- If the contractor fail to make good the disturbed surface of wall/floor etc and do not match with the existing surface of wall/floor to the entire satisfaction of Engr-in-Charge a recovery @ of Rs. 50/- per RM will be made from payment due to the Contractor. In case of any dispute the decision of accepting officer will be final and binding. |
| 17 | Material and labour for earthing complete with galvanised steel earth plate electorde of size 600 x 600 x 6 mm thick, burried directly in ground (earth pit not less than 2.2 m below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to earth strip of size 25 x 4 mm earth lead by means of nuts, bolts and washers of galvanised iron and earth lead protected by galvanised iron pipe 40 mm bore(medium grade) and connected to earth test point and including cement concrete pit in PCC (1:3;6) type C-!(using 20 mm graded aggregate) and pre-cast RCC cover slab of size 300 x 300 x 50 mm thick with rain forced with 8 mm dia deformed bars both ways and one handle for lifing made with 10 mm dia mild steel bar,funrel, wire mesh 20 mm bore galvanised (medium grade) for watering, charcoal and salt in alternate layers including necessary execuation and eath works in any types of soil complete all as shown on Electrical plate no 5 of MES Schedule Part I including taking out materials from existing on complete all as specified and directed. |
| 18 | M&L for repair of suction sweeper trolley mounted centrifugal pumpset upto 5 HP 3 Phase, transportation to wksp for repair, replacing of impeller, bearing, gland packing,rewinding motor,PVC wheels, GI nipple etc for running of pump at satisfactory level including and greasing and re-installation complete with one coat of synthetic enamaled paint complete all as specified and directed.and painting all as specified and directed. |
| 19 | S&F Water Pressure Gauage of capacity 0 to 10 Kg / equivalent |
| 20 | S&F of PVC insulated PVC Sheathed electric copper conductor cable of size 4 sqmm 4 core cable of working voltage 1100 volts fixed on wall from LT panel to motor starter including fixing material all as specified and directed. |
| 21 | Supply only of alum CRYSTAL complete all as specified and directed. |
| 22 | Supply only TCCA 90 Granules (Trichloroisocyanuric acid) for cleaning of swimming pool all as specified and directed by Engineer-in-Charge |
| 23 | Supply and fix flexible PVC Hose pipe of internal dia 50 mm all as specified and directed |
| 24 | Supply and fix in replacement of cast iron pipe/ fittings flang and socketed / all socketed / all flanged type such as bend upto 150mm bore (any type radious and angle) tapers any type (straight, bend, increasing, descreasing or double socket etc), Tee piece single branch, 'Y' junction, double branch cross (all sockets or socket and spigot) collors, caps and plugs, D joint, mechanical joint as in repairs, excavation earth work and run lead joints shall be measured and paid seperately. |
| 25 | All as per above item No 28 here-in-before but 200 to 300mm bore |
| 26 | Supply and fixing in replacement MCB TPN/ FP 16-32 Amp, 415 V AC 'C' series 10 KA repturing capacity complete all as specified. |
| 27 | S & F fresh air fan AC single phase 230/240 Volt of size 450 mm sweep, metallic body powder coated painted finish, Power consumption- 50 W, Air displacement -1290 Cum/Hr, RPM-900 complete with louvers including making whole and grouting of nut bolts etc and making good the disturbed surfaces of wall complete all as specified and directed. |
| 28 | S & F in replacement of unsv cheminject dozing pump Diaphragm Type having flow rate 50 Ltr/Hr at back pressure - 08 Kg/cm2 fitted with1/2 HP 440 V AC 1500 RPM Motor and with all accessorries like foot valve ,Y strainer ,antisiphon valve,suction/discharge tubing etc and where directed including making connections with existing dozing line and testing upto the satisfaction of Engr-in-Charge. Make : RMCO Cat Part No-RM-12 or equivalent in Declibac and M/S Sathya Sai Aqua Pura services. |
| 29 | S & F in replacement of old unsv solution cum setteling tank 100 ltr cap with sludge deposition facility fitted with 900 rpm agitator motor , float valve and required connection pipe required as per the site requirement all as specified and directed by Engineer-in-ChargeMake : RMCO MODEL No. CDMS 100 or equivalent in Declibac and M/S Sathya Sai Aqua Pura services. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysOct 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender