Tender For Construction Of Multilevel Parking At Dr. Radha Krishanan Govt. Medical College Hamirpur, At Jol Sappar, Tehsil -Nadaun, District-Hamirpur (Hp). Part-I- Civil Work (Sh:- construction of Building Portioni/C Ws & Si, Rainwater Harvesting Tan
Tender Value
62.69 Crore
Estimated cost
Bid Submission
19 Sep 2026
9 days left
EMD
72.69 Lakhs
Bank guarantee accepted
Document Fee
70000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hamirpur → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Multilevel Parking At Dr. Radha Krishanan Govt. Medical College Hamirpur, At Jol Sappar, Tehsil -Nadaun, District-Hamirpur (Hp). Part-I- Civil Work (Sh:- construction of Building Portioni/C Ws & Si, Rainwater Harvesting Tank, Septic Tank, Site Development, Fire Fisghting Water Storage Tank, Approach Road And Boundary Wall Etcetera.). Part-Ii:- Electrical Work (Sh:- Sitc, Electrical Installation, Fire Fighting System, Fire Alarm System, Dg Set, Cctv, Surveillance System And Lift Therin. Estimated Cost:-Rs. 626900696/- Earnest Money:- Rs. 7269100
BOQ
| Sl. No. | Item Description |
| 1 | Excavation work by mechanical means (hydraulic excavator)/ manual in all height and depths and in all kind of soil including saturated soils comprising of pick work, jumper work, pick jumper work, blasting work both in soft and hard rocks, chiseling/ wedging out of rock (where blasting is prohibited) and their intermediate classification of soil , setting out true to the required line, grades, width, cutting and trimming of side slopes as shown in the drawing and if water is met with in the excavation due to springs, seepage, rain and other causes it shall be removed by the suitable diversion pumping or bailling out and excavation shall be kept dry wherever so required by the contractor at his own cost as directed by the Engineer-In-Charge and disposal all surplus excavated soil in acquired width or at an approved dumping site (to be arranged by the contractor) including its stacking leveling dressing including all lead and lifts by head load, mechnical transportation or by any other mode of transportation with all cost of labours, machineries and other incidentals to complete the work as per HP PWD specification. Any loss to the public or private property during the course of execution and disposal of unserviceble meterial shall be the absolute responsibility of the contractor which shall have to be compensated by him in all case. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 2 | Excavation work by mechanical means (hydraulic excavator)/ manual in foundation trenches or drains and overall areas in earth work of all kind of soil such as pick work, jumper work, blasting work, jumper blasting work soft and hard blasting and saturated soil, de-watering, including wedging out rocks where blasting is prohibited, chiseling or any other mixed variety of soil, including shoring, strutting or bailing out water upto any depth or any height quantum of water including dewatering removal of slush and stacking the serviceable and unserviceable material clear from the edge of excavation and as per direction of Engineer-In-Charge and returning the stacked soil in 15 cm (Fifteen centimetre) layers, when required into plinths, side of foundation etcetera consolidating each deposited layer by ramming watering and then disposing of all excavated earth as directed by the Engineer-In-Charge, ( the unuseful material for disposing at dumping site ( to be arranged by the contractor) within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge.The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 3 | Excavating trenches of required width for pipes, cables, etcetera including excavation for sockets, and dressing of sides, ramming of bottoms, upto any depth including getting out the excavated soil, then returning the soil as required, in layers not exceeding 20 cm (Twenty centimetre) in depth, including consolidating each deposited layer by ramming, watering, etcetera and disposing of surplus materials/excavated soil as per specification, approved drawing, design, specification and as per the entire satisfaction of Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. . |
| 4 | Supplying and filling in plinth with sand under floors,including watering, ramming, consolidating and dressing complete including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 5 | Providing and laying of properly hand-packed filling interstices with Kharanja stone solling under floors of selected hard stone including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 6 | Providing and filling with stone boulder behind retaining walls of selected hard stone complete including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 7 | Preparation and consolidation of sub grade with Road Roller 8-10 (eight - ten) Tonne, including making good the undulation etcetera after excavating earth to an average of 22.5 cm (twenty two decimal five centimetre) depth, dressing to camber and consolidating with road roller including making good the undulations etcetera and re-rolling the sub grade completed as per HP.PWD specifications including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 8 | Providing and construction of granular sub-base 150mm (one hundred fifty milimeters) compacted thickness by providing well graded materials as per table 400.1 spreading in uniform layers with tractor mount grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with three wheel roller 80-100 kN (Eighty-hundred Kilo Newton) static roller to achieve the desired density, complete as per MORD Technical Specification section 400 for grading-I material, including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 9 | Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) ( fifty three millimetre to zero point zero seven five millimetre ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads and lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne ( eight to ten tonne) capacity to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 10 | Providing and laying mechanically mixed and vibrated plain cement concrete 1:5:10 (One cement isto five sand isto ten graded stone aggregate 40mm (Forty millimetre) nominal size) and curing complete excluding cost of form work in Retaining wall/return wall/ breast wall and foundation and plinth complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 11 | Providing and laying mechanically mixed and vibrated plain cement concrete 1:4:8 (One cement isto four sand isto eight graded stone aggregate 40mm (Forty millimetre) nominal size) and curing complete excluding cost of form work in Retaining wall/return wall/ breast wall and foundation and plinth complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 12 | Providing and laying mechanically mixed and vibrated plain cement concrete 1:3:6 (One cement isto three sand isto six graded stone aggregate 40mm (Forty millimetre) nominal size) and curing complete excluding cost of form work in Retaining wall/return wall/ breast wall and foundation and plinth complete complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 13 | Providing and laying in position machine batched and machine mixed cement concrete work of grade M-20 (M-Twenty) design mix to obtain the minimum compressive strength of 20N/mm square (Twenty newton per square millimetre) with cement contents not less than @ 320 Kilogram / Cubic metres (at the rate Three hundred twenty kilogram per Per Cubic metre) or as per approved design mix. All works upto and above plinth level to give a smooth surfaces machanically mixed and vibrated including curing complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability etcetera including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 14 | Providing and laying in position machine batched and machine mixed cement concrete work of grade M-25 (M-Twenty five) design mix to obtain the minimum compressive strength of 25N/mm2 (Twenty five newton per square millimetre) with cement contents not less than @ 360 Per Kilogram / cubic metre (at the rate Three Hundred sixty kilogram per cubic metre) or as per approved design mix for all works upto and above plinth level to give a smooth surfaces machanically mixed and vibrated including curing complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability etcetera including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 15 | Providing and laying in position machine batched and machine mixed cement concrete work of grade M-35 (M-Thirty five) design mix to obtain the minimum compressive strength of 35N/mm2 (Thirty five newton per square millimetre) with cement contents not less than @ 500 Per Kilogram / cubic metre (at the rate Five Hundred kilogram per cubic metre) or as per approved design mix for all works upto plinth level to give a smooth surfaces machanically mixed and vibrated including curing complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability etcetera including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 16 | Providing and laying in position machine batched and machine mixed cement concrete work of grade M-35 (M-Thirty five) design mix to obtain the minimum compressive strength of 35N/mm2 (Thirty five newton per square millimetre) with cement contents not less than @ 500 Per Kilogram / cubic metre (at the rate Five Hundred kilogram per cubic metre) or as per approved design mix for all works above plinth level to give a smooth surfaces machanically mixed and vibrated including curing complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability etcetera including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 17 | Providing and laying in position machine batched and machine mixed trimix cement concrete pavement (vaccum dewatering flooring) work of grade M-25 (M-twenty five) design mix concrete from batching plant to obtain the minimum compressive strength of 25N/mm2 (Twenty five newton per square millimetre) with minimum cement contents shall not be less than @ 360 Per Kilogram / cubic metre (at the rate Three Hundred sixty kilogram per cubic metre). The ready mixed concrete shall be laid and finished with screed board vibrator, vaccum dewatering process and finally finished by floating, brooming with wire brush etcetera and including installation of dowels on position as per load design, providing steel form work with sturdy Mild steel channel sections, curing, making provision for contraction, expansion, construction & longitudinal joints minimum size of 10mm (ten millimetre) wide and 50mm (fifty millimetre) deep by groove cutting machine and joints filler, sealant, complete in all respect as per specifications and directions of Engineer-in-charge. including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 18 | Providing plinth protection with 40-50mm ( forty to Fifty millimetres) thick interlocking paver blocks of M -30 (M-thirty) grade of NTC / Atlantic with 23cm (Twenty three centimetres) diametre Half round stone ware pipe for drainage purpose laid over 25cm (twenty five centimetres) thick cement concrete 1:4:8 (One cement isto four sand isto eight graded) stone aggregate bedding complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 19 | Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depth of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Foundation footings, bases of columns and mass concrete or other similar works including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, entire satisfaction and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 20 | Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depth of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors roofs, landings balconies and access platform or other similar works for upto plinth and all floors level including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 21 | Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres),so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced and plain concrete work in stairs cases with slopping or stepped soffits, (excluding landing) except spiral staircase upto all floors level complete including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 22 | Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced concrete and plain concrete work in Vertical surfaces such as walls (any thickness) partitions and the like including attached pilasters buttresses, plinth and string courses, and other similar works complete upto plinth and all floors level including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 23 | Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in columns, pillar, piers, abutments, post and struts square, cicular, rectangular, polygonal etcetera for upto plinth and all floors level complete including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 24 | Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera; with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beams, cantilevers, girders, lintels sides and soffits of beams haunchings, cantilevers, bressumers and lintels for upto plinth and all floors level complete including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications, entire satisfaction and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 25 | Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced and plain concrete work in edges of slab and breaks in floors and walls any thickness for upto plinth and all floors level complete including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 26 | Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetre), so as to give a fair finish including centring, shuutering, strutting and propping etcetera with wooden battens and ballies for all height/depths and removal of the same for in situ-reinforced concrete and plain concrete work in window sills, cornice and moulding and the like upto all floors level including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, specifications and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 27 | Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced and Chullah hoods, weather shades, chhajjas, corbels etcetera including edges, upto plinth and all floors level complete including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 28 | Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centering, shuttering, strutting and propping etcetra with wooden battens and ballies for all height/depths and removal of the same for insitu-reinforced concrete & plain concrete work in vertical fins and vertical sun breakers or other similar works including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, specifications and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 29 | Providing and erection of Tor steel reinforcement Thermo Mechanically Treated bars of grade Fe-550D (five Hundred fifty -D ) of (Sail / TATA Tiscon) for reinforced cement concrete work including bending, binding, cutting, straightening and placing in position complete including cost of binding wires complete upto all floor levels as per approved specifications, drawing, design, as per entire satsfaction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 30 | Providing, fabrication and erection in position structural steel work of Tata / Sail Steel work welded in built up sections, in railling, brackets, gates, gratings framed guard bars, stringers, treads, landings etcetera of stair cases, including use of chequered plate and other similar works wherever required including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etcetera as required and works as per approved make all complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 31 | Providing, fabrication and erection in position structural steel work of Tata / Sail riveted, bolted or welded in built up and hollow sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 32 | Providing and fixing 50 mm (Fifty millimetres) diametre SST-316 (Stainless steel three hundred sixteen) grade pipe handrail fixed with 35 mm (Thirty five millimetres) diametre stainless steel baluster as per detail in combination of 35 x 35mm (Thirty five into Thirty five millimetres) square and 15/20mm (Fifteen/twenty millimetres) SST pipe baluster knock down railing of KICH/Nipun/Jindal hand rail fixed on 10x50mm (Ten into fifty millimetres) stainless steel flat balusters placed at 1200 mm (One thousand two hundred millimetres) centre to centre along with 3 nos (Three Numbers @ 16 mm (Sixteen millimetres) mid rail connected at the side of the baluster with fixtures .The baluster would be fixed on the floor with casted base plate minimum 6mm (six millimetre) thick base plate shall be concealed with suitable S.S. 316 ( three hundred sixteen ) grade cover cap railing made of Hollow tubes, channels, plates etcetera including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories and stainless steel dash fasteners , stainless steel bolts etcetera , of required size, on the top of the floor or the side of waist slab with suitable arrangement complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 33 | Providing and fixing 50mm (Fifty millimetres) diametre SST-316 (Stainless steel three hundred sixteen) grade pipe Of KICH/Nipun/Jindal handrail slip resistant in ramp at two level, having 75cm (Seventy five centimetres) and 90cm (Ninety centimetres) height welded with 25mm (Twenty five millimetres) diametre Stainless steel hollow pipe balusters embedded in cement concrete 60cm (Sixty centimaters) centre to centre and jointing with electrical gas welding at top alongwith hand rail of hollow Stainless steel pipe of 50mm (Fifty millimetres) diametre. It should extend 30cm (Thirty centimetres) beyond top and bottom of the ramp complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 34 | Providing and fixing in position collapsible steel shutters of with vertical channels 20x10x2mm (twenty into ten into two millimetre) and braced with flat iron diagonals 20x5mm (twenty into five millimetre) size, with top and bottom rail of T-iron 40x40x6mm (forty into forty into six millimetre), with 40mm (forty millimetre) diametre steel pulleys, complete with bolts,nuts, locking arrangement, stoppers, handles, including applying apriming coat of approved steel primer including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 35 | Supplying and fixing rolling shutters of approve make and manufacture made of 80mm x 1.25mm (Eighty millimetre into One point two five millimetre) M.S. Laths interlocked together through their entire length and joined together at the end by end locks mounted on specially designed pipe shaft with brackets side guides and arrangements for inside and outside locking with push pull operation complete but excluding the cost of the top cover and spring shutters , as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 36 | Providing and fixing angle iron frames for doors, windows and ventilators of Tata / Sail having mild steel channel sections of size 75x40x4mm (seventy five into forty into four millimetre) and Mild Steel angle 25x20x3mm (twenty five into twenty into three millimetre), joints mitred and welded by Mild Steel flat iron 40x12mm (forty into twelve millimetre) to the existing T- iron frame size 25x25x3mm (twenty five into twenty five into three millimetre), and Z-sections as per detail to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 37 | Providing and fixing Single rebate angle iron door,window,clerestory window frame manufactured from steel iron section of 40mmX40mmX5mm, (forty millimetre into forty millimetre into five millimetre) thickness including hinges jamb,lock jamb,beed and if required angle threshold ofmild steel angle 50X25 mm (fifty millimetre into twenty five millimetre) welded or rigidly fixed by mechanical means,lugs with split end tails to each jamb including steel butt hinges 2.5 mm (two point five millimetre) thick with provision for locking arrangement and shock absorber as specified and applying a coat of approved steel primer after pre-treatment of the surface etcetera including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 38 | Providing and fixing second class teak wood work in frames of doors, windows, clerestory windows and other frames,wrought framed and fixed in position with hold fast lugs or with dash fasteners of required diametre and length , including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 39 | Providing and fixing 65 x 100mm (sixty five into one Hundred millimetre) factory made single extruded WPC (Wood Polymer Composite) solid doors/ windows / Celestory windows and other Frames / Chowkhat approved make of Alstone, Floresta, Ecoste, Century ply, comprising of virgin PVC polymer of K value 58-60 (fifty to sixty Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 (twelve) for 100 (hundred) grams) fabricated with miter joints after applying PVC solvent cement and screwed with ful body threaded star headed SS screws having minimum frame density of 850 Kilogram/Per Cubic metre (Eight Hundred fifty kilogram per Per Cubic metre), screw withdrawal strength of 2200N (two thousand two hundred) (Face) and 1100N (One thousand one hundred) (Edge), minimum compressive strength of 58N/mm2 (fifty eight newton per millimetre square), modulus of elasticity 900N/mm2 (Nine Hundred newton per millimetre square), and resistance to spread of flame of CIass A category with property of being Termite / borer proof, water / moisture proof and Fire retardant and fixed in position with M.S hold fast / lugs / SS dash fasteners of required diametre and length including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 40 | Providing and fixing factory made coloured powder coated/anodised aluminium work for frame of doors, windows, ventilators and glazed partitions of Jindal / Hindalco aluminium with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS:1285 anodised transparent or dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC-15) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etcetera (Section No. 14081 of Jindal / Hindalco etcetera. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleat angle, aluminium, snap beading for glazing/panelling C.P. brass/stainless steel screws all complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 41 | Providing and fixing factory made coloured powder coated/ anodised aluminium work for shutters of doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of Jindal /Hindalco approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etcetera Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in charge (Glazing and panel fill to be paid for separately). For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 42 | Providing and fixing 40mm (forty millimetre) thick second Class deodar wood panelled or panelled and glazed shutters for doors windows and clerestory windows having top rail 100x40mm (One Hundred into forty millimetre), style 100x40mm (One Hundred into forty millimetre), middle rail 150 x 40mm (One Hundred fifty into forty millimetre) and bottom rail shall be 200 x 40mm (Two Hundred into forty millimetre) infill with 12mm (Twelve millimetre) thick prelaminated BWP grade MDF board and 5.0 mm (Five millimetre) thick float glass including brass butt hinges with necessary screws and 12x17.5mm (Twelve into seventeen point five millimetre) wooden beading, and lipping/ outer moulding 50x12.5mm (Fifty into twelve point five millimetre), complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 43 | Providing and fixing 35mm (Thirty five millimetre) thick both side commercial phenol bonded ISI Marked flush door shutter of CENTURY/ALPRO/ DURO PLY / GREEN PLY No.1S-2202 decorative type, core of block board construction to be finished with mica lamination of approved shade with frame of 1st (first) class hard wood and well matched ply veneering with vertical grain or cross bands and face veneering on both faces of shutters including black enameled Stainless steel butt hinges with necessary screws etcetera complete as per specifications, drawing and design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 44 | Providing and fixing 35mm (Thirty five millimetre) thick factory made Decorative Pre-laminated (Vision panel) flush door shutter CENTURY/ALPRO/ DURO PLY / GREEN PLY No.1S-2202 both side commercial i.e non decorated phenol bonded termite resistant and boiling water proof ISI Marked, core of black board construction to be finished with mica lamination of approved shade with frame of 1st (first) class hard wood and well matched ply veneering with vertical grain or cross bands and face veneering on both faces of shutters with vision panel not exceeding 0.10 sqm (zero decimal one zero square metre) in all type flush including black enameled M.S butt hinges with necessary screws etcetera complete as per specifications, drawing and design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-In-Charge.The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 45 | Providing and fixing 35mm (thirty five millimetre) thick factory made singIe extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter approved make of Alstone, Floresta, Ecoste, Century ply in required size comprising of virgin polymer of K value 58 (fifty Eight) to 60 (Sixty) (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 (twelve) for 100gms (hundred grams)) having minimum density of 850 Kilogram/Per Cubic metre (Eight hundred fifty kilogram per Cubic metre) and screw withdrawaI strength of 1800 N (Eighteen hundred newton) (Face) and 900 N (Nine hundred newton) (Edge), minimum compressive strength 50 N/mm2 (fifty newton per sqaure millimetre), modulus of elasticity 850 N/mm2 (eight hundred fifty newton per sqaure millimetre) and resistance to spread of flame of Class A category with property of being Termite or borer proof, water or moisture proof and Fire retardant. WPC to be laminated with PVC foil of minimum 14 (fourteen) microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk, S.S screws, complete including entire carriage of materials within all leads, lifts and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 46 | Providing and Fixing 18mm (eighteen millimetre) thick factory made singIe extruded WPC (Wood Polymer Composite) solid board of Alstone, Floresta, Ecoste, Century ply, having one side white color and other side of board Iaminated with PVC foil of mininum 14 (fourteen) micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/kitchen cabinet etcetera of required sizes comprising of virgin polymer of K value 58 to 60 (fifty eight to sixty Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum (six hundred fifty kilogram per cubic metre) and screw withdrawaI strength of 1800 N (Face) and 900 N (Edge), minimum compressive strength 50 N/mm2, (fifty newton per sqaure millimetre) modulus of elasticity 850 N/mm2 (eight hundred fifty newton per millimetre square) and resistance to spread of flame of Class A category with property of being Termite or borer proof, water or moisture proof and Fire retardant. WPC to be laminated with PVC foil of minimum 14 (fourteen) microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunI‹ S.S screws, complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 47 | Providing and fixing 25mm (Twenty five millimetre) thick one side prelaminated water proof commercial board of green ply/Century Ply / kit ply/Dura ply/Marino exterior/interior grade ISI marked No. 12823 for SDB shutters with 6mm (Six millimetre) thick hard wood edging all round and PGI sheet lining inside of the shutters of approved shade complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 48 | Providing and fixing 25mm (Twenty five millimetre) thick shutters of commercial Board water proof shutters for cup boards of Century Ply / Dura ply / kit ply / Green ply / Marino ply including fixing of beading and stainless steel butt hinges with screws etcetra and finished with 25x6mm (twenty five into six millimetre) hard wood lipping / edging complete as per approved make complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 49 | Providing and fixing 19mm (ninteen millimetre) thick Commercial board waterproof termite resistant proof shutters for cup boards and finishing the edges with 19x6mm (ninteen millimetre into six millimetre) hardwood beading including fixing with SS piano hinges with screws etcetera complete of Nova pan / Kit ply / National / Archidply / Action Tesa / Green Ply including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 50 | Providing and fixing 19mm (nineteen millimetre) thick water proof commercial board of Century Ply / Dura ply / kit ply / Green ply / Marino ply in shelves/box for cup board with butt joints and fixing with nails and screws etcetra as per approved make complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 51 | Providing and fixing water proof 8.0mm (eight millimetre) thick ply of standard quality ISI mark of Uniply/Green ply/Kit ply/Marino ply and approved shade and colour in panelling and wall linning including mitring at junctions, butt jointing and nails complete including frame work of 50x31mm (fifty into thirty one millimetre) soft wood grid frame work at 600 mm C/C (six hundred millimetre centre to centre) of paneling, having approved make complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 52 | Providing and fixing 1.00mm (one millimetre) thick colored and decorative high pressure laminated sheet of Century Ply/ Green Ply/Action Tessa/Marino Ply of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S,including cost of adhesive of approved quality complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 53 | Providing and fixing 1st (first) class deodar wood plain square edged cover fillets (beading) 50mmx25mm (fifty millimetre into twenty five millimetre) section, with wood screws in ceiling and lining including mitring at junction complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 54 | Providing and fixing aluminum U beading 2.5mm (two decimal five millimetre) thick of required size to Pre-laminated/ flush door shutter, including fixing and carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 55 | Providing and fixing 20mm (twenty millimetre) diametre stainless steel curtain rods of wall thickness 1.25 mm (one decimal two five millimetre) with two brass brackets fixed with brass screws and wooden plugs etcetra complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 56 | Providing and fixing 12 mm (twelve millimetre) thick frameless toughened glass door shutter of Modi Guard/Saint Gobain/AIS/Atul/Gold Plus including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etcetra for fixing required door fittings including lock with key complete in all respect including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 57 | Providing and fixing 12 mm (twelve millimetre) thick frameless toughened glass partitions of Modi Guard/Saint Gobain/AIS/Atul/Gold Plus including all necessary fixing arrangement with Methylated spirit, SS, patch fitting and making required holes etcetra complete in all respect including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 58 | Providing and fixing 8.0 mm (eight milimetre) thick toughened glass weight should not be less than 20.0 kg/ sqm (twenty kilogram per square metre) glazing of Modi Guard/Saint Gobain/AIS/Atul/Gold Plus in aluminium/uPVC/wood door, window, ventilator shutters and partitions etcetra complete with necessary screws, including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 59 | Providing and fixing 6.0 mm (six milimetre) thick toughened glass panes (weight not less than 15.00 Kilogram/ Square Metre) (Fifteen point zero kilogram per sqaure metre) Glass panes of Modi Guard/Saint Gobain/AIS/Atul/Gold Plus in door, window, ventilator shutters and partitions etcetera with EPDM / neoprene gasket etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 60 | Providing and fixing 6.0mm (Six millimetre) thickness float glass panes (weight not less than 15.00 Kilogram/ Square Metre) (Fifteen point zero kilogram per sqaure metre)of Modi Guard / Saint Gobain / AIS / Atul / Gold Plus in door, window, ventilator shutters and partitions etcetera with EPDM rubber / neoprene gasket etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 61 | Providing and fixing 5.0mm (Five millimetre) thick froasted glass panes (weight not less than 12.5 Kilogram/ Square metre) (Twelve point five kilogram per sqaure metre) Glass panes of Modi Guard / Saint Gobain / AIS / Atul / Gold Plus in door, window, ventilator shutters and partitions etcetera with EPDM rubber / neoprene gasket etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 62 | Providing and fixing 12mm (Twelve milimetres) thick Phenol bonded (both Side ) prelaminated BWP grade particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 of Action Tesa / Century / Greenlam / Merinolam / Kitlam / Vista of approved shade Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etcetera complete including entire carriage of materials within all leads, lifts and other incidentals, as per approved drawing, design and as directed by the Engineer-In-Charge. .The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GS |
| 63 | Providing and fixing Fly proof stainless steel grade 304 (three Hundred four) wire guage with 0.5mm (Zero point five millimetres) diametre wire and 1.4mm (One point four millimetres) wide aperture for doors windows and clerestory windows with necessary screws complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 64 | Providing and fixing 8mm (Eight millimetre) thick anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved make (Hindalco/Jindal) and as per approved design/pattern,with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200mm (at the rate two Hundred millimetre) centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete at all levels including entire carriage of material upto all leads, lifts and other incidentals and further as per the direction and entire satisfaction of Engineer-In-Charge.The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 65 | Providing and fixing M.S. (Mild steel) grills of require pattern in wooden/steel frames of windows etcetera with 12 x 6mm (Twelve into six millimetre) Mild Steel Flats in combination with 10 x 10 mm (Ten into Ten millimetre) square bars with round headed bolts and nuts or by screws complete all as per Drawing and Techanical Specifications including entire carriage of materials within all leads, lifts and other incidentals, as per approved and as directed by the Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 66 | Providing and fixing 0.60 mm (Zero point sixty millimetres) thick prepainted steel sheet (ISI Marked-Z 120) of Tata Durashine / Sail / Reliance / JSW colouron, in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating to back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetre) diametre with prepainted limpet and rubber washers complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 67 | Providing and fixing polycarbonate Corrugated transparent or Skylight sheet 2.8mm (two point eight millimetre) thick in roofing/flashing/ridges,valleys etcetera with necessary Galvanised screws, nuts, washer etc. complete with all accessories as required as per approved make (Lexun, Duratuff, Suntuff (PalRam) in all shades like Clear transparent, Bronze, Grey, Gold, Aqua Green (Solar Olympic), Solar Ice, etcetera including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 68 | Providing and fixing Multi Wall polycarbonate transparent or Skylight sheet 10mm (Ten millimetre) thick in roofing/flashing/ridges,valleys etcetera with necessary Galvanised screws, nuts, washer etcetera complete with all accessories as required as per approved make (Lexun, Duratuff, Suntuff (PalRam) in all shades like Clear transparent, Bronze, Grey, Gold, Aqua Green (Solar Olympic), Solar Ice, etcetera including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 69 | Providing and fixing factory made ridges or hips having proper gola shape 60 cm (Sixty centimetres) overall with 0.60 mm (Zero point six zero millimetres) thick prepainted steel sheets of Tata Durashine / Sail / Reliance / JSW colouron in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating + back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetres) dia and prepainted G.I. limpet and bitumen washers complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 70 | Providing and fixing valley 90cm (Ninety centimetres) overall 0.60mm (Zero point six zero millimetres) thick prepainted steel sheet of Tata Durashine / Sail / Reliance / JSW colouron in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimetres) dia with prepainted G.I. limpet and bitumen washers complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 71 | Providing and fixing flushing 38 cm (Thirty eight centimetres) overall with 0.60 mm (Zero point six zero millimetres) thick prepainted sheet of Tata Durashine / Sail / Reliance / JSW colouron in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating and back coat of polyester of 5 (five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetres) diameter and prepainted G.I. limpet and bitumen washers complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 72 | Providing and fixing 30cm (Thirty Centimetre) wide 25cm (Twenty five centimetre) deep 0.60mm (Zero point six zero millimetres) thick prepainted plain Preprinted Galvanised Iron sheet gutter of Tata / Sail having dome shape grating fixed with bolts, nuts and washers etcetera including making necessary connections with rain water pipe complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 73 | Providing and fixing M.S. B.P. sheet 2.0mm (Two point zero millimetres) thick eaves board/facia/soffits/ceiling of TATA / Jindal / Sail including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-In-charge, (Base members of steel work shall be measured and paid separately) including fixing complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 74 | Providing and fixing mild steel brackets made of TATA/ Sail with vertical post 100x50mm (One Hundred into fifty millimetre), main frame of 50x50x3.0mm,( Fifty into fifty into three millimetre) distribution member shall be 25x25mm ( twenty five into twenty five millimetre), hollow pipe of specified shape, projecting 450mm (four Hundred fifty millimetre) outside the wall surface and 450mm (four Hundred fifty millimetre) length fixed on wall with 4 (four) numbers, 6mm (six millimetre) diametre expansion hold fasteners, including drilling necessary holes in brick wall/ CC/ RCC surface and the cost of bolts etcetra. The side M.S flat for brackets and centre piece shall be welded and fixed with M.S. nuts, bolts, and washers of size 25x3mm (twenty five into three millimetre), one bolts on Each side on the both sides of 50x50mm (ifty into fifty millimetre) hollow pipe, total length is 900mm (nine Hundred millimetre) and angular length is 425mm (four Hundred twenty five millimetre) including fixing complete as per architectural drawings including carriage of material, within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 75 | Providing and fixing decorative screen in corridor TATA /Sail, manufactured with 25mm x 25mm (twenty five millimetre into twenty five millimetre) hollow square pipes welded with mild steel hollow sections of size 50 x 50mm (fifty into fifty millimetre), supported on 10 cm (ten centimetre) diametre mild steel hollow pipes. A centre piece shall be of 25 x 3mm (twenty five into three millimetre) mild steel flat frame covered with Mild Steel black sheet with flower pattern, made to shape and applying a priming coat of approved steel primer using structural steel complete as per architectural drawings including carriage of material, within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge.The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 76 | Providing and fixing 600x600x6mm (six Hundred into six Hundred into six millimetre) Aluminium Composite Panel ceiling of Alstone,Aludecor,Eurobond, Alstrong with pre-painted GI channel framing @ 600mm (at the rate six hundred millimetre) centre to centre with suitable screw complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 77 | Providing and fixing 15mm (fifteen millimetre) thick false ceiling tiles at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595mm (five hundred ninety five into five hundred ninety five millimetre) of Gyproc, Armstrong, Everest as per approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (zero decimal five zero) (minimum) as per IS 8225:1987, Light reflectance of 85% (eighty five percent) (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100% (One hundred percent), thermal conductivity < 0.043 W/m K as per ASTM 518:1991, in true horizontal level on the existing frame work consisting of T-sections and Lsections suitably fixed according to tile size complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge.The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 78 | Providing and fixing 18mm ( eighteen millimetre) thick WPC fluted false ceiling Panel at all height and all levels having minimum width of 150 mm (one hundred fifty millimetre) of approved shade and pattern, with G.I grid of module size 450mm x 450mm ( four hundred fifty millimetre into four hundred fifty millimetre) shall be supported by 4/6 mm (four oblique six millimetre) diametre G.I. framing including carriage of material, within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge.The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 79 | Providing and fixing plaster of Paris (gypsumanhydrous) ceiling for all floor level, over hot dipped galvanized steel sections (galvanized @ 120 grams/Square metre (one hundred twenty grams per square metre), both side inclusive) consisting of main \\"T\\" runner with suitably spaced joints to get required length and of size 24x38mm ( twenty four into thirty eight millimetre) made from 0.30mm (zero point three zero millimetre) thick (minimum) sheet on desired grid with 10mm (ten millimetre) gap in between and reinforced with rabbit wiremesh fixed to Galvanised Iron frame complete as per architectural drawings and approved pattern including carriage of material, within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge.The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 80 | Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building, for all heights and all levels etc. including :-(A) Structural analysis & design and preparation of building drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design.(B)Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 6mm (Six millimetre) thick aluminium composite panel material consisting of 3mm (three millimetre) thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm (zero point five millimetre) thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 (five hundred) based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 (one) and polymer (Service) coating on face # 2 (two)as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. (C) The fastening brackets of Aluminium alloy 6005 (Six thousand five) T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, Stainless Steel 316 (three hundred sixteen) Pins and anchor bolts of approved make in Stainless Steel 316 (three hundred sixteen), Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP (Aluminium composite panel) cladding is payable under the relevant aluminium items The Contractor shall provide curtain wall with Aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm up to two decimal places, including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge.The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 81 | Providing and laying of brick work using Second class common burnt clay building bricks in super-structure upto all floor level in cement mortar 1:6 (One cement isto Six sand) and curing complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 82 | Providing and laying of of half brick masonary with second class common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (Seven point five) in superstructure above plinth up to all floor level in cement mortar 1:4 (One cement isto four sand) and curing complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 83 | Providing and construction of second class half brick masonary for shaft with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) in superstructure above plinth level up to all floor levels in Cement Mortar 1:4 (one cement: four course sand) and strength with hoop iron and bituminious coated cross ties including making weep hole and vent pipe complete 2 Nos. (two number ) 6/8 ( six / eight ) width brass in Z- shape crossing each other shall be provided at the interval 90-100cm (ninety to hundred centimetre) length horizontal and vertical in cavity wall and curing complete). The measurement of wall faces only one side will be considered for payment), complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 84 | Providing and laying (MODCRETE MAKE) autoclaved aerated cement blocks masonry with 100 mm (One hundred millimetre) thick AAC blocks in super structure above plinth level up to all floor level/heights in cement mortar 1:4 (One cement : four course sand ). The rate includes providing and placing in position 2 Nos (Two numbers) 6 mm (Six millimetre) dia M.S. bars (SAIL,TATA Tiscon) at every third course of masonry work including entire carriage of materials with in all leads, lifts, drawings, technical specifications and the direction by Engineer-in-Charge and other incidentals. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 85 | Providing and laying (MODCRETE MAKE) autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm (One hundred fifty / two hundred thirty / three hundred millimetre) thick AAC blocks in super structure above plinth level up to all floor level/heights with RCC band at sill level and lintel level with approved block laying Polymer Modified Adhesive Mortar complete as per direction by Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately) including entire carriage of materials with in all leads, lifts drawings and other incidentals. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 86 | Providing and construction of random rubble masonry with hard stone in foundation, plinth, retaining or returning/breast walls and other similar works including levelling up with cement concrete 1:6:12 (one cement isto six coarse sand isto twelve graded stone aggregate 20 mm (twenty millimetre) nominal size) upto plinth level with Cement mortar 1:6 (one cement isto six coarse sand) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government. |
| 87 | Providing and plastering 15mm (Fifteen millimetres) thick cement plasters in two coat on fair and rough side of brick/concrete/ stone walls for interior/exterior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth with cement mortar 1:6 (One cement isto six fine sand) above plinth level to all floor level complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 88 | Providing and plastering 12mm (Twelve millimetres) thick cement plasters in single coat on fair side of brick/concrete/ stone walls for interior/exterior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth with cement mortar 1:4 (One cement isto four fine sand) above plinth level to all floor level complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 89 | Providing and plastering 6mm (Six millimetres) thick cement plaster to ceiling in cement mortar 1:3 (One cement isto three fine sand) complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 90 | Providing and plastering 15mm (Fifteen millimetres) thick cement plasters in single coat on fair side of brick/concrete/ stone walls for exterior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (eighty millimetre) in girth and finished even and smooth with cement mortar 1:5 (One cement isto five sand) above plinth level to all floor level complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 91 | Providing and plastering 12mm (twelve millimetre) thick and 100mm (One Hundred millimetre) wide plain cement mortar bands in cement mortar 1:4 (one cement : four fine sand) surface of brick/concrete/ stone walls for exterior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 92 | Providing and plastering of 15mm (Fifteen millimetres) Cement plaster in cement mortar 1:5 (one cement isto five sand) on surface of brick/ concrete/ stone walls including forming groove of uniform size from 12x12 mm (twelve into twelve millimetre) and upto 25x15 mm (twenty five into fifteen millimetre) in the top layer of plastered surface as per approved design & pattern having 230mm c/c (two hundered thirty millimetre centre to centre) horizontally equal wideness and finishing of groove complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 93 | Providing and plastering 20mm (twenty millimetre) Cement plaster in cement mortar 1:3 (one cement : three sand) in single coat on the fair side of brick/ concrete/ stone walls for interior plastering upto all floor level including arrises,internal rounded angles, chamfers and/or rounded angles and finished even and smooth. (including all type design and pattern) above plinth level to all floor level complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 94 | Providing and laying 600x1200 mm (Six hundred into One thousand two hundred millimetres), 10mm (ten millimetre) thick Full body anti skid Vitrified tiles of Nitco /Kajaria / Simpolo /Johnson / Somany of approved shade and design, in flooring laid on a bed of 20mm (twenty millimetre) thick cement mortar 1:4 (One cement isto four sand) and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 95 | Providing and laying (600x1200)mm (Six hundred into One thousand two hundred millimetres), 10mm (ten millimetre thick) full body anti skid vitrified tile of Nitco /Kajaria / Simpolo /Johnson / Somany as per approved shade and design of the office and thickness to be specified by manufacturer), with water absorption less than 0.08% (Zero point zero eight percent) and conforming to I.S. 15622, of approved make, in all colours and shade, in skirting, riser of steps, over 12mm (Twelve millimetre) thick bed of cement mortar 1:3 (One cement isto Three coarse sand) jointing with grey cement slurry @ 3.3 Kilogram/ Square metre (Three point three kilogram per suare metre) including grouting the joint with white cement and matching pigments etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 96 | Providing and laying 600x600 mm (Six hundred into six hundred millimetres), 10mm (ten millimetre) thick Full body anti skid Vitrified tiles of Nitco /Kajaria / Simpolo /Johnson / Somany of approved shade and design, in flooring laid on a bed of 20mm (twenty millimetre) thick cement mortar 1:4 (One cement : four sand) and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 97 | Providing and laying 600x600 mm (Six hundred into six hundred millimetres), 10mm (ten millimetre) thick full body anti skid vitrified tile of Nitco /Kajaria / Simpolo /Johnson / Somany as per approved shade and design of the office and thickness to be specified by manufacturer), with water absorption less than 0.08% (Zero point zero eight percent) and conforming to I.S. 15622, of approved make, in all colours and shade, in skirting, riser of steps, over 12mm (Twelve millimetre) thick bed of cement mortar 1:3 (One cement isto Three coarse sand) jointing with grey cement slurry @ 3.3 Kilogram/ Square metre (Three point three kilogram per suare metre) including grouting the joint with white cement and matching pigments etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 98 | Providing and laying 300x300mm (Three hundered into Three hundered millimetres) with 10mm (ten millimetre) thickness of full body/ full body anti skid/ Vitrified tiles of Nitco /Kajaria / Simpolo /Johnson / Somany of approved shade and design, in flooring etcetera laid on a bed of 20mm (twenty millimetre) thick cement mortar 1:4 (One cement isto four sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 99 | Providing and fixing 300x300mm (Three hundered into Three hundered millimetres) with 10mm (ten millimetre) thickness of full body/ full body anti skid Vitrified tiles first quality antiskid vitrified wall tiles of Nitco /Kajaria / Simpolo /Johnson / Somany as per approved shade and design of the office with water absorption less than 0.08% (Zero point zero eight percent) and conforming to I.S. 15622, in all colours & shade, in skirting, riser of steps, over 12mm (Twelve millimetre) thick bed of cement mortar 1:3 (One cement isto Three coarse sand) jointing with grey cement slurry @ 3.3 Kilogram/ Square metre (Three point three kilogram per square metre) including grouting the joint with white cement and matching pigments etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 100 | Providing and laying (600x1200)mm (Six hundred into One thousand two hundred millimetres), 10mm (ten millimetre thick) vitrified tiles with glossy finish of Nitco /Kajaria / Simpolo /Johnson / Somany as per approved shade and design of the office and thickness to be specified by manufacturer), with water absorption less than 0.08% (Zero point zero eight percent) and conforming to I.S. 15622, of approved make, in all colours and shade, in skirting, riser of steps, over 12mm (Twelve millimetre) thick bed of cement mortar 1:3 (One cement istoThree coarse sand) jointing with grey cement slurry @ 3.3 Kilogram/ Square metre (Three point three kilogram per suare metre) including grouting the joint with white cement and matching pigments etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 101 | Providing and laying 300x600mm (Three hundred into Six hundred millimetre), 10mm ( ten millimetre) thick first quality ceramic wall tiles of Nitco /Kajaria / Simpolo /Johnson / Somany in skirting risers of steps and dados with cement mortar 1:3 (One cement isto three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete, as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals.The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 102 | Providing and laying mirror polished 25mm (Twenty five millimetre) thick Kota stone minimum Size 55x55cm (Fifty five into Fifty five centimetre) of uniform colour with 7.5cm (Seven decimal five centimetre) widewhite marble band of same shade that of flooring of approved shade as per detail slab flooring over 20 mm (twenty millimetre) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1:4 (One cement isto Four coarse sand) complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 103 | Providing and laying mirror polished 25mm (Twenty five millimetre) thick Kota stone single piece slab in treads of steps with uniform nosing / edging laid over 20mm (Twenty millimetre) (average) thickness base of cement mortar 1:3 (One cement isto Three sand) and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rubbing and polishing complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 104 | Providing and laying Kota stone slabs 20mm (Twenty millimetre) thick in risers of steps, skirting, dado and pillars laid on 12mm (Twelve millimetre) thick cement mortar 1:3 (One cement isto Three coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 105 | Providing and laying 19 mm (Nineteen millimetre) thick Sadar Ali / Red lakha polished Granite stone flooring in combination with 15cm ( fifteen centimetre) wide black Granite band as per pattern and detail laid over 20mm(Twenty millimetre) thickness base of cement mortar 1:4 (One cement : four sand) and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rubbing, polishing, etcetra complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 106 | Providing and laying 19mm (Nineteen millimetre) thick Polished Black/ Grey / Lakha Red Granite Stone having Semi Round nosing in work top of Kitchen/ Reception/ Pantry / under counter wash basin and water trough laid over 20mm (twenty millimetre) thickness base of cement mortar 1:3 (One cement isto Three sand) and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rubbing and polishing complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge.The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 107 | Providing and fixing 19 mm (nineteen millimetre) thick Sadar Ali / Red lakha / black of required shade leather finished Granite stone with uniform double round nosing gang saw cut, mirror polished, premoulded and prepolished, machine cut for tread of steps and similar locations of required size, approved shade, colour and texture laid over 20 mm (twenty millimetre) thick base cement mortar 1:4 (one cement isto four coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 108 | Providing and fixing 19 mm ( Nineteen milimetres) thick polished Grey / Sadar Ali/ Red lakha / black Granite single slab in risers of steps, skirting, dado and pillars laid on with special adhesive over 12 mm (twelve millimetre) thick bed of cement mortar 1:3 (one cement isto three coarse sand), including pointing in white cement with an admixture of pigment to match the stone shade including rubbing and polishing complete, as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 109 | Providing and fixing 40mm (forty millimetre) wide 20 mm (twenty millimetre) thick broda green marble stone strip moulding above panneling work / tile work / other similar work, including machine polishing to edge to give high gloss finish etcetra complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 110 | Providing and fixing 200x1200 mm (two hundered into (Six hundred into One thousand two hundred milliemtre) wall panelling with prelaminated wooden planks conforming to IS:13958-1994 including providing and fixing to frame work made of 50mm x 50mm (fifty millimetre into fifty millimetre) hardwood plugs including cutting brick work and fixing in cement mortar and making good the wall etc. and also providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etcetra with iron screws all complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 111 | Providing and laying 50 mm (fifty millimetre) thick cement concrete flooring 1:2:4 (one cement isto twenty sand isto four graded stone aggregate 20 mm (twenty millimetre) nominal size) laid in one layer finished with a floating coat of neat cement as per directions and entire satisfaction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 112 | Providing and laying 300x300x25 mm (Three hundred into three hundred into twenty five millimetres) Labrador Design (Rainbow Series) tiles of NTC / Unistone / Atlantic in flooring in ramp for person with disability on 20mm (Twenty millimetres) average thick base of cement mortar 1:4 (One cement isto four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polish finish as per architect standred design and specification complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 113 | Providing and laying 300x300mm (Three hundred into Three hundred millimetre) with 12mm (Twelve millimetre) thickness exterior grade tactile tile (for vision impaired persons as per standards) of having water absorption less than 0.5% (Zero point five percent) of Kajaria /Johnson or approved make from Engineer-in-Chief office, in all colours and shades, in outdoor floors such as footpath, court yard, multimodals location, ramp area or other similar locations, conforming to IS : 15622, laid on 20mm (twenty millimetre) thick cement mortar 1:4 (One cement isto four sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 114 | Providing and laying 600mm x 600mm (Six Hundred millimetre into Six Hundred millimetre) Heat Resistant Terrace Tiles of Somany / Oreint & bell, with 10mm (Ten millimetre) thickness having SRI (solar refractive index) > 78 (Sevety Eight) , solar reflection > 0.70 (Zero point Seventy) and initial emittance>0.75 (Zero point Seventy Five) on waterproof and sloped surface of terrace, on 20mm (Twenty millimetre) thick bed of cement mortar 1:4 (One cement isto four coarse sand) and making 3-4mm (three to four millimetre) wide groove & grouting the joints with epoxy of required shades, including rubbing and polishing of the surface upto 3 (Three) cuts complete, including providing skirting upto 150mm (One hundred fifty millimetre) height along the parapet walls in the same manner including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 115 | Providing and laying 12mm (twelve millimetre) thick Unistone / NTC / Atlantic stone cladding on wall surface with 12mm (twelve millimetre) thick cement mortar 1:3 (one cement isto three sand) and jointed with cement slurry to match the stone including scaffolding complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 116 | Providing and laying 20mm (twenty millimtere) thick teraacotta pressed clay tiles (as per approved pattern of approved size) approved make of taylor or its equivalent on roofs jointed with cement mortar 1:4 (One cement isto four coarse sand) mixed with 2 (two) integral waterproofing compound, laid over a bed of 20mm (twenty millimtere) thick cement mortar 1:4 (One cement isto four coarse sand) and finished neat complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge.The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 117 | Providing and fixing 760 x 760mm (Seven hundred Sixty into Seven hundred Sixty millimetre) or (size as per direction of Engineer-in-charge) with 50mm (fifty millimetre) thickness of precast factory made glass reinforced concrete Jali panels of approved size, at all faces (circular, rectangular, flat face or other geometric shape). Pattern, design, thickness and colour of NTC make or its equivalnent. the panels should be make from 53 (fifty three) grade of white Portland cement manufactured by \\"JK cement\\" or its equivalent Quartz, Fine Silica, Sand, alkali resistant Glass fiber manufactured by 'Ownes corning' or its equivalent, Super Plasticizers manufactured by 'BASF' or its equivalent Polymers manufactured by 'BASF'or its equivalent and UV resistant synthetic inorganic pigments should be used for pigmentation manufactured by 'BAYFERROX (Germany) or its equivalent.The material casting should take place in FRP Mould. The fixing of Screen should be 'DRy fixing' such that to be done with stainless steel (SS-304 (three zero four) 'L' shaped brackets, fasteners and pins complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 118 | Providing and applying Birla / J.K. white wall care putty over plaster surface after thoroughly brushing the surface free from mortar dropings, dust, loose material and other foreign matters, sand papered smooth to give final matt finish to the surface upto floor all level complete including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 119 | Providing and painting walls with 100% (one hundred percent) premium emulsion of Asian / Dulux / Berger / Nerolac Suraksha paints of approved shade having VOC less than 50 gm/litre (Fifty gram/per litre) and UV resistance as per IS 15489:2004, Alkali and fungal resistance, dirt resistance exterior paint of required shade with silicon additives for new work (Two or more coats applied @ 1.43 litre/ 10 sqm. (One point four three litre per ten square metre) Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm (Zero point nine zero litre per ten square metre) complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 120 | Providing and painting two coats wall painting with Plastic emulsion paint of Asian Paints/ Dulux /Berger paints /Nerolac Suraksha paints to give an even shade complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 121 | Providing and painting two coats with silicon and acrylic emulsion of Asian Paints/ Dulux /Berger paints /Nerolac Suraksha paints for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty as required for matting the surface smooth complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 122 | Providing and painting with acrylic washable emulsion of Asian Paints/ Dulux /Berger paints/Nerolac Suraksha paints for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty as required for matting the surface smooth complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 123 | Providing and applying distempering with oil bound washable distemper of Nerolac/ Asian Paints to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer Priming coat with distemper primer complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 124 | Providing and painting walls with weather proof exterior emulsion of Asian / Dulux / Berger / Nerolac Suraksha paints of approved shade having VOC less than 50 gm/litre (Fifty gram per litre) and UV resistance as per IS 15489:2004, Alkali and fungal resistance, dirt resistance exterior paint of required shade with silicon additives for new work (Two or more coats applied @ 1.43 litre/ 10 sqm. (One point four three litre per ten square metre) Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm (Zero point ninety litre per ten square metre) complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 125 | Providing and finishing surface with Epoxy paint (two or more coats) on steel work at all locations prepared and applied as per approved make of Asian paints / Dulux paints / Nerolac suraksha paints / Berger Paints including preparation of surface, etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 126 | Providing and painting with oil type wood preservative of (Asian Paints/ Dulux /Berger paints/Nerolac Suraksha paints) for new wood work by applying two or more coats, including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting etcetera complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 127 | Providing and applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matters sand papering and knotting of readymixed paint brushing with white lead for priming of Asian paints / Dulux /Berger paints/Nerolac Suraksha paints complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 128 | Providing and applying priming with cement primer coat on new concrete/ masonry/ asbestos cement/ plastered surfaces after and including preparing the surface by thoroughly cleaning oil, grease,dirt and other foreign matter and sand papering as required with Ready mixed primer of Asian Paints/ Dulux /Berger paints/Nerolac Suraksha paints complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 129 | Providing and polishing two coats with french polish on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt, dust and sand papered smooth and including a coat of wood filler including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 130 | Providing and painting two coats (including priming coat) on over new wood and wood based surfaces with enamel paint of Asian Paints/ Dulux /Berger paints/Nerolac Suraksha paints brushing to give an even shade including cleaning the surfaces of all dirt, dust andother foreign matter complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 131 | Providing and painting two coats (excluding priming coat)on new concrete / masonry/ plastered surfaces with enamel paint of (Asian Paints/ Dulux /Berger paints/Nerolac Suraksha paints to give an even shade, including cleaning of all dirt, dust and other foreign matter and sand papering as required including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 132 | Providing, supplying and fixing in position upto size of 450mm x 300mm (four hundred fifty millimetre into three hundred millimetre) \\"Directional Sign Board\\", like Washroom, Restroom, No smoking, stairs, lift etcetera with international pictorial symbols and a directional arrow indicator made of venyl sheet pasted on ACP backing and screw including scaffolding / ladder work, transportation, loading, unloading complete including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 133 | Providing and Painting road surface marking with two numbers of coats to give uniform finish with with readymixed roadmarking paint conforming to IS : 164 on road surface in white / yellow shade, to give an even shade, including cleaning of all dirt, dust and other foreign matter and sand papering as required complete in all respect including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 134 | Providing and laying Damp Proof Course 50mm (Fifty millimetre) thick with cement concrete 1:2:4 (one cement isto two sand isto four graded/crushed stone aggregate) 20mm (Twenty millimetre nominal size) and curing complete, as required at site including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 135 | Providing and applying a coat of residual petroleum bitumen of grade VG-10 (Viscosity grade-Ten) of approved quality using 1.70 Kgs. (one decimal seven zero Kilogram) per square metre on Damp Proof Course after cleaning the surface with a piece of cloth lightly soaked in kerosene oil, including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 136 | Providing and laying water proofing treatment of Dr. Fixit / Asian in sunken portion of WCs, bathroom etcetera, by applying cement slurry mixed with water proofing cement compound consisting of applying:i) Ist course of applying cement slurry @ 0.488 kg/sqm (at the rate zero decimal four eight eight kilogram per square metre) mixed with water proofing compound @ 0.253 Per Kilogram/ Per square metre (at the rate zero decimal two five three kilogram per square metre). This layer will be allowed to air cure for 4 (four) hours.ii) Second layer of slurry of cement @ 0.242kg/sqm (at the rate zero decimal two four two Kilogram Per square metre) mixed with water proofing cement compound @ 0.126kg/sqm (at the rate zero decimal one two six Kilogram/Per square metre). This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 137 | Providing and laying Dr. Fixit Torch Shield (P-3160-3mm), APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm (three millimetre) thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/Per Square Metre (at the rate zero point forty litre per square metre) by the same membrane manufactured of density at 25°C, 0.87 - 0.89 Per Kilogram/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etceteraetera, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/ 5cm (five centimetre) . Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM,D -5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge.The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 138 | Supply and installing SBS (Styrene Butadiene Styrene) membrane a self adhesive cold applied flixible 1.5mm (One point five millimetre) thick proofing mambrane comprising of self adhesive bitumen compound laminated on to an impervious non perforated cross laminated HDPE Filf/Voitron film applied on the external surface of retaining wall pot construction and after de-shuttering done etcera including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 139 | Supplying and installing water proofing treatment of raft slab / stitch slab by using 1.02mm (One point zero two millimetre) thick fully bounded HDPE (High Density Polyethene) material. The fully bonded HDPE (High Density Polyethene) membrane looses laid on the Plain cement concrete before casting of the Reinforced cement concrete raft slab /stich slab/footings etcetra and comprises of an aggressive pressure sensitive water proof adhesive and a weather proof protection layer the pre fabricated meberane gets bounded to the underneath of the poured concrete used as rat slab / stitch slab fully bounded HDPE (High Density Polyethene) memberane system shall confirm to basement water proofing protection to grade 2.3 (two point three) as defined in BS 8102:2009 etcera including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 140 | Providing and fixing 450gsm (four hundred fifty gram per square millimetre) HDPE (High Density Polyethene) dimpled memberane 0.80mm (Zero point eight zero millimetre) thick as a protection layer for SBS (Styrene Butadiene Styrene) memberane against backfilling soil including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 141 | Treatment of soil under proposed floors in proportion of dilute compound by using 1.0 (one) litre water @ 2.5 (at the rate two decimal five) millilitre chemical emulsion (Imidacloerid 30.5% SC) and using diluted compound @ one litre per hole, 300 mm (three hundred millimetre) and laying of PVC pipes condiuts of approved make (Termi Pores/ Irrigate Pores) apart including drilling 12 mm (twelve millimetre) diameter holes and plugging with cement mortar 1:2 (one cement isto two Coarse sand) to match the floor. The laying of material shall be got done through the authorised applicator of the manufacturer of material including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 142 | Providing and fixing stainless steel raised signage or Logo, as \\"MULTILEVEL PARKING BLOCK\\" or other similar words in captal letters or \\"Himachal Pradesh Government\\" or other similar type of logos, on facade, fabricated from stainless steel Grade 316 (three hundered sixteen) sheet conforming to IS 5522, minimum 20G (≈1.0 mm) for flat letters and 1.0–1.2mm (One millimetre to One point two millimetre) thick sheet formed skins for raised/box letters / logos having minimum 50mm (fifty millimetre) depth or otherwise as per height proportion of the letters, complete. Letters/logos shall be Water jet / CNC / laser cut to approved font / artwork from approved drawings, edges hemmed / formed as required, ground, buffed and polished to uniform finish; finish shall be brushed or mirror, or exterior-grade PVD TiN “golden” or \\"metal\\" colour, as per specified in drawings or as per direction of Engineer-In-Charge. Fixing shall be with concealed stainless steel studs welded/bonded to letters and anchored to the substrate (stone/concrete/ACP/backing frame) using stainless steel dash fasteners or approved chemical anchors; drilling, plugging/anchoring, non-staining epoxy or sealant grouting, alignment to true line / level / plumb, and no visible face fixings. The rate includes setting out, full-size of letters mock-up per finish for approval, staging/scaffolding, protection of adjacent finishes, and making good complete as per approved drawings and as directed by the Engineer-in-Charge. (face area shall be consider for payment) The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 143 | Providing and fixing stainless steel signage \\"Engraved Foundation Stone\\" name plate/ \\"Himachal Pradesh Government\\" or other similar type of logos, fabricated from stainless steel Grade 316 (three hundered sixteen) sheet conforming to IS 5522, minimum 20G (≈1.0 mm) for flat letters and 1.0–1.2mm (One millimetre to One point two millimetre) thick sheet formed skins for engraved letters 15mm-20mm (fifteen to twenty millimetre) letters depth unless noted otherwise, complete. Letters/logos shall be Water jet / CNC / laser cut to approved font / artwork from approved drawings, edges hemmed / formed as required, ground, buffed and polished to uniform finish; finish shall be brushed or mirror, or exterior-grade PVD TiN “golden” or \\"metal\\" colouras per specified in drawings or as per direction of Engineer-In-Charge. Fixing shall be with concealed stainless steel screws or anchored to the substrate (stone/concrete/ACP/backing frame) using stainless steel dash fasteners or approved chemical anchors; drilling, plugging/anchoring, non-staining epoxy or sealant grouting, alignment to true line / level / plumb, and no visible face fixings. The rate includes setting out, full-size templates, staging/scaffolding, protection of adjacent finishes, and making good complete as per approved drawings and as directed by the Engineer-in-Charge. (face area shall be consider for payment). The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 144 | Providing and fixing concealed hinges for windows / Ventilators/ all other works of approved quality for 20mm (twenty millimetre) thick for door with stainless steel screws complete, including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 145 | Providing and fixing 125mm (one hundred twenty five millimetres) nominal size double acting spring hinges with necessary brass screws complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 146 | Providing and fixing 125x75x4 mm (one hundred twenty five into seventy five into four millimetre) ISI marked CED coated self closing hinges fitting with as per required colour or shade with necessary SS-304 grade screws etcetra complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 147 | Filling the gap upto 5mm (five millimetre) depth and 5mm (five millimetre) width in between steel/aluminium/uPVC frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 148 | Providing and fixing 300x16mm (Three Hundred into Sixteen millimetres) nominal size bright matt finished Stainless steel sliding door bolts ISI marked or approved quality and make with necessary screws etcetera complete including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 149 | Providing and fixing 250x16mm (Two Hundred fifty into Sixteen millimetres) nominal size bright matt finished Stainless steel sliding door bolts ISI marked or approved quality and make with necessary screws etcetera complete including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 150 | Providing and fixing 250x10mm (Two Hundred fifty into Ten millimetres) nominal size bright/matt finished Stainless steel Tower bolts (barrel type), ISI marked or approved quality and make with necessary screws etcetera complete including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 151 | Providing and fixing 100x16mm (one hundred into Sixteen millimetres) nominal size aluminium sliding door bolts ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with nuts and screws etcetera complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 152 | Providing and fixing 250x16mm (two hundred fifty into Sixteen millimetres) nominal size aluminium sliding door bolts ISI marked, anodised (anodic coating not less than grade AC 10 (ten) as per IS : 1868) transparent or dyed to required colour or shade, with nuts and screws etcetera complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 153 | Providing and fixing 300x16mm (three hundred into sixteen millimeters) ISI marked oxidised M.S. door latches conforming to IS:5930 with screws etc. complete as per HPPWD specifications and as directed by the Engineer-in-Charge. including carriage of materials within all leads, lifts and other incidentals.The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 154 | Providing and fixing 150x10mm (One hundred fifty into ten millimeters) ISI marked oxidised M.S. door latches conforming to IS:5930 with screws etc. complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 155 | Providing and fixing aluminium 200x10mm (Two hundred into Ten millimetres) nominal size Tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with nuts and screws etcetera. complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 156 | Providing and fixing aluminium 150x10mm (One hundred fifty into Ten millimetres) nominal size Tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with nuts and screws etcetera. complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 157 | Providing and fixing aluminium 100x10mm (One hundred into Ten millimetres) nominal size Tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with nuts and screws etcetera. complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 158 | Providing and fixing 150x10mm (One hundred fifty into Ten millimetres) nominal size oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 159 | Providing and fixing 100x10mm (One hundred into Ten millimetres) nominal size oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 160 | Providing and fixing bright finished Chromium plated brass 100 x 65mm (one hundred into sixty five millimetre) mortice latch and lock with 6 (six) levers and a pair of lever handles and key provision / arrangement of approved quality with necessary screws etcetra complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 161 | Providing and fixing bright finished cylinderical Chromium plated brass 165 x 75 mm (one hundred sixty five into seventy five millimetre) mortice latch and lock without key provision of approved quality with necessary screws etcetra complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 162 | Providing and fixing bright finished brass 100 mm (one hundered millimetre) mortice latch and lock with 6 (six) levers of approved quality with necessary screws complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 163 | Providing and fixing 65x35mm (Sixty five into thirty five milllimetres) special quality bright finished brass cup-board locks or ward robe locks with six levers including necessary screws etcetra (Indian make of approved quality) complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-In-Charge.The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 164 | Providing and fixing Double strip (horizontal type) 150mm (one hundred fifty millimetre) size of magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etcetra complete, as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 165 | Providing and fixing powder coated telescopic drawer channels 450 mm (four hundred fifty millimetre) long with necessary screws etcetera complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 166 | Providing and fixing sliding arrangement in racks/ cupboards/cabinets shutter by with stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be made separately) etcetera complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 167 | Providing and fixing bright /matt finished Stainless Steel 304 Grade 300mm (Three hundred millimetre) long and 20mm (twenty millimetre) diametre handle of approved quality necessary screws etcetera complete including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 168 | Providing and fixing bright /matt finished Stainless Steel 304 Grade 22mm (twenty two millimetre) diameter and 300mm (Three hundred millimetre) long H-handles of approved quality with necessary screws etcetera all complete including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 169 | Providing and fixing bright /matt finished Stainless Steel 304 Grade 125mm (one hundred twenty five millimetre) drawer of approved quality and make with necessary screws etcetera complete including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 170 | Providing and fixing 200mm (Two hundred millimetres) nominal size aluminium Handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etcetera; complete including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 171 | Providing and fixing 100mm (One hundred millimetres) nominal size aluminium Handles ISI marked anodised (anodic coating not less than grade AC 10 (ten) as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etcetera; complete including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 172 | Providing and fixing 125mm (One hundred twenty five millimetres) nominal size M.S. Handles ISI marked with necessary screws etcetera; complete including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 173 | Providing and fixing 100mm (One hundred millimetres) nominal size M.S. Handles ISI marked with necessary screws etcetera; complete including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 174 | Providing and fixing aluminium hanging floor Twin door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 (ten) as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etcetera; complete including carriage of material within all leads, lifts and other. incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 175 | Providing and fixing aluminium hanging floor Single door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 (ten) as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etcetera; complete including carriage of material within all leads, lifts and other. incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 176 | Providing and fixing 250mm (two hundred fifty millimetres) nominal size aluminium casement stays, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with nuts and screws etcetera complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 177 | Providing and fixing Anodised Aluminium Casement stay 150 mm (one hundred fifty millimetre) casement stays, ISI marked, anodised (anodic coating not less than grade AC 10 (ten) as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etcetera complete complete including carriage of material within all leads, lifts and other. incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 178 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 Per Kilogram (one hundred twenty five kilogram), for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etcetera complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 179 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 Per Kilogram to 80 Per Kilogram (thirty six per kilogram to eighty per kilogram) and door width from 701 mm to 1000 mm (seven hundred one millimetre to one thousand millimetre), with double speed adjustment with necessary accessories and screws etcetera complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 180 | Providing and fixing of expansion joint, floor Joint of 40 mm (forty millimetre) gap, system related with floor location as per drawings and direction of Engineer-In-Charge. The joints system will be of extruded aluminum base members, self aligning / self centering arrangement and support plates etcetera as per ASTM B221-02. The system shall be such that it provides floor to floor /floor to wall expansion control system for various vertical location in load application areas that accommodates multi directional seismic movement without stress to it's components. System shall consist of metal profiles with a universal aluminum base member designed to accommodate various project conditions and finish floor treatments. The cover plate shall be designed of width and thickness required to satisfy projects movement and loading requirements and secured to base members by utilizing manufacturer’s preengineered self- centering arrangement that freely rotates / moves in all directions. The Self - centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. Provision of Moisture Barrier Membrane in the Joint System to have watertight joint is mandatory requirement all as per the manufactures complete, (Material shall confirm to ASTM 6063). including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 181 | Providing and fixing sheet covering over expansion joints with iron screws as per design, Aluminium fluted strips 3.15 mm (three point one five millimetre) thick, 150 mm (one hundred fifty millimetre) wide including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 182 | Providing and fixing 150mm (One hundred fifty millimetres) diametre on wall face PVC rain water pipes working pressure 6K.g/cm2 (Six kilogram per centimetres square) ISI marked of Finolex / Relpipe (Reliance) / Vectus/ Astral/ Astral including priming coat, painting and welding etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 183 | Providing and fixing 150mm (One hundred fifty millimetre) nominal bore/diameter P.V.C. plain bend of Finolex / Relpipe (Reliance) / Vectus/ Astral conforming to IS No.-14735-99 including filling the joints with approved adhesive complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 184 | Providing and fixing 150mm (One hundred fifty millimetres) diametre Shoe on wall face for PVC rain water pipes working pressure 6.0 K.g/cm2 (Six kilogram per centimetres square) ISI marked of Finolex / Relpipe (Reliance) / Vectus/ Astral including priming coat, painting and welding etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 185 | Providing and fixing 150mm (One hundred fifty millimetre) diametre PVC clamps (heavy type) ISI marked of Finolex / Relpipe (Reliance) / Vectus/ Astral approved design to PVC rain water pipe including cost of cutting holes and steel screws, rawal plug and making good the walls etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 186 | Providing and laying 110mm (one Hundred ten millimetre) diametre with working pressure not less than 4.50 Kilogram/cm2 (four point five zero kilogram per centimetre square) ISI marked PVC pipe weep holes in brick masonry/stone masonry, plain reinforced concrete, Abutments, Wing walls, Return walls and retaining/breast walls extended through the full width of the structure with slope I(V) : 20(H) (One vertical : Twenty Horizontal) towards draining face complete as per drawing and MORD technical specification section 700 and 1200 and as per direction of Engineer-In-Charge including carriage of materials within all leads, lifts and other incidentals.The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 187 | Providing five sets of structural drawings for civil works based upon complete geotechnical investigation, structural analysis, design calculations duly proof checked from NIT/IIT and approval from the competent authority, including providing design and layout plan for electrical installations, fire fighting system, CCTV , surveillance system etc., as directed by Engineer-in-Charge, as per special condition in SBD. The rate includes octroi, royalty, Malkhana, toll tax or other taxes imposed by the Government but excluding GST. |
| 188 | Water supply and Sanitary Installation |
| 189 | Providing and fixing 110mm (One hundred ten millimetre) diametre Finolex / Relpipe (Reliance) / Vectus/ Astral pressure shall not be less than 6.0 kg/cm2 (six point zero kilogram per centimetre square) PVC Spigot and Socket, waste and ventilating pipe ISI marked including fixing with approved adhesive complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 190 | Providing and fixing 150mm (One hundred fifty millimetre) diametre Finolex / Relpipe (Reliance) / Vectus/ Astral pressure shall not be less than 6.0 K.g/cm2 (Six kilogram per centimetres square) PVC Spigot and Socket, waste and ventilating pipe ISI marked including fixing with approved adhesive complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 191 | Providing and fixing 75mm (Seventy five millimetre) diametre Finolex / Relpipe (Reliance) / Vectus/ Astral pressure shall not be less than 6.0 kg/cm2 (Six point zero kilogram per centimetre square) PVC Spigot and Socket, waste and ventilating pipe ISI marked including fixing with approved adhesive complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 192 | Providing and fixing 110mm (One hundred ten millimetres) nominal bore/diameter Plain bend ISI marked of Finolex / Relpipe (Reliance) / Vectus/ Astral pressure shall not be less than 6.0 kg/cm2 (Six point zero kilogram per centimetre square) including fixing with approved adhesive complete. including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 193 | Providing and fixing 75mm (Seventy five millimetres) nominal bore/diameter Plain bend ISI marked of Finolex / Relpipe (Reliance) / Vectus/ Astral pressure shall not be less than 6.0 kg/cm2 (Six point zero kilogram per centimetre square) including fixing with approved adhesive complete. including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 194 | Providing and fixing 110mm (One hundred ten millimetre) diametre PVC door bend with oval access door, of Finolex / Relpipe (Reliance) / Vectus/ Astral pressure shall not be less than 6.0 kg/cm2 (Six point zero kilogram per centimetre square) insertion rubber washer 3 mm (Three millimetre) thick bolts and nuts ISI marked complete including fixing with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 195 | Providing and fixing 110x90mm (One hundred ten into ninety millimetre) nominal size ISI marked P.V.C floor trap of Finolex / Relpipe (Reliance) / Vectus/ Astral pressure shall not be less than 6.0 kg/cm2 (Six point zero kilogram per centimetre square) of self cleaning design complete including fixing with approved adhesive cost of cutting and making good the walls and floors etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 196 | Providing and fixing 110x75mm (One hundred ten into seventy five millimetre) nominal size ISI marked P.V.C floor trap of Finolex / Relpipe (Reliance) / Vectus/ Astral pressure shall not be less than 6.0 kg/cm2 (Six point zero kilogram per centimetre square) of self cleaning design complete including fixing with approved adhesive cost of cutting and making good the walls and floors etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 197 | Providing and fixing 150mm (One hundred fifty millimetre) nominal bore/diameter ISI marked PVC collar of Finolex / Relpipe (Reliance) / Vectus/ Astral complete upto all floor level complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 198 | Providing and fixing 110mm (One hundred ten millimetre) nominal bore/diameter ISI marked PVC collar of Finolex / Relpipe (Reliance) / Vectus/ Astral complete upto all floor level complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 199 | Providing and fixing 110mm (One hundred ten millimetre) nominal bore/diameter P.V.C clamps (heavy type) of Finolex / Relpipe (Reliance) / Vectus/ AstralISI marked including finishing with approved design with steel screws and rawal plugs etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 200 | Providing and fixing 75mm (Seventy five millimetre) nominal bore/diameter P.V.C cowl of Finolex / Relpipe (Reliance) / Vectus/ Astral ISI marked including finishing with approved design with steel screws and rawal plugs etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 201 | Providing and fixing 90mm (Ninety millimetre) nominal bore/diameter P.V.C cowl of Finolex / Relpipe (Reliance) / Vectus/ Astral ISI marked including finishing with approved design with steel screws and rawal plugs etcetera. complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 202 | Providing and fixing 110mm (One hundred ten millimetre) nominal bore/diameter P.V.C cowl of Finolex / Relpipe (Reliance) / Vectus/ Astral ISI marked including finishing with approved design with steel screws and rawal plugs etcetera. complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 203 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm (three hundred into three hundred millimetre) size (inside) the weight of cover to be not less than 4.50 kg (four point five zero kilogram) and frame to be not less than 2.70 kg (two point seven zero kilogram) as per standard design: 100x100 mm (one hundred into one hundred millimetre) size P type, with common burnt clay F.P.S. (non modular) bricks of class designation 7.5. complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 204 | Providing and fixing white vitreous china flat back urinal of size 633 x 395 x 423.7mm ( six hundred thirty three into three hundred ninety five into four hundred twenty three point seven millimetre) with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, of approved make (Hindware/ Cera/ Jaguar Star white/ Snowhite) including painting of fittings and cutting and making good the walls and floors wherever required:Range of three half stall urinals with 10 ( ten ) litre P.V.C. automatic flushing cistern including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 205 | Providing and fixing 600x300mm (Six hundred into Three hundred millimetre) nominal size of Division Plate for Urinals Hindware /cera/Jaquar of star white / snow white shade and (Heavy duty make ISI marked No- 8931 and 8934) of approved quality and colour complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge.The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 206 | Providing and fixing floor mounted, white vitreous china single piece, EVITA EWC (720 x 370 x 745)mm (Seven hundred twenty into three hundred seventy into seven hundred forty five millimetre) , double traps syphonic of approved brand/make of (Jaguar,Cera), shape, size and pattern as per approval of Engineer-In-Charge, including integrated white vitreous china cistern of capacity 10 (ten) litres with dual flushing system, PP Soft Close Slim Seat Cover, Hinges and set along with 8mm (eight millimetre) diametre C.P pre-installed jet arrangement including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the P trap 180 mm (One hundred eighty millimetre), complete in all respect including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 207 | Providing and fixing Oval Shape 620 x 370 x 670mm ( six hundred twenty into three hundred seventy into six hundred seventy millimetre) floor mounted, white vitreous china single piece FLORA series of Hindware or Cera or its equivalent, double traps syphonic of shape, size and pattern as per approval of Engineer-In-Charge, including integrated white vitreous china cistern of capacity 10 (ten) litres with dual flushing system, PP Soft Close Slim Seat Cover, Hinges and set along with 8mm (eight millimetre) diametre C.P pre-installed jet arrangement including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the S trap 220 mm (two hundred twenty millimetre), complete in all respect including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 208 | Providing and fixing water closet squatting pan Cat no. 20042 (580x440x300mm) ( five hundred eighty into four hundred forty into three hundred millimetre) (Indian type W.C. pan ) with 100 mm ( one hundred millimetre) sand cast Iron P or S trap, 10 (ten) litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required for White Vitreous china Orissa pattern W.C. pan of integral type foot rests of approved make (Hindware/ Cera/ Jaguar Star white/ Snowhite) including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 209 | Providing and fixing vitreous china pedestal type/wash down floor mounted Matrix water closet (WC) for specially abled person Cat no. 7011 with size of (740x550x835)mm (Seven hundred forty into five hundred fifty into Eight hundred thirty five millimetre) with supporting arrangement, white colour studio set along with 8mm (eight millimetre) diametre C.P pre-installed jet arrangement, SEAT COVER, Flushing CISTERN 10ltr. (ten litre) capacity and twin flushing valves etcetera complete in all respect, water closet (European Type - WC pan) with integral 'p' or 's' trap including jointing the trap with soil pipe in cement mortar 1:1 (one cement, one sand) (with cistern, seat cover and flush fitting) of approved make (Hindware/ Cera/ Jaguar Star white/ Snowhite), complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 210 | Providing and fixing Health faucet ABS with rubbit cleaning system, flexible tube upto 1.25 mtr (one point two five metre) long PVC Flexible tube and ABS wall hook to extended wall mounted type W.C. of quality and make Kingston / Gem / Parko / JAL, ESS / Jaquar / Seiko complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 211 | Providing and fixing 550x400mm (five hundred fifty into four hundred millimetre) type wash basin with half pedestal height 510mm ( five hundred ten millimetre) C.I. brackets, 32 mm ( thirty two millimetre) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 212 | Providing and fixing White Vitreous China 520x450mm (five hundred twenty into four hundred fifty ) counter type wash basin with C.I. brackets, 32 mm ( thirty two millimetre) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 213 | Providing and fixing matrix wash basin size 450x300mm (four hundred fifty into three hundred millimetre) model no. 7207 with single with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require of approved make Jaguar of snow white/star white shade, Hindware, Cera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 214 | Providing and fixing Stainless Steel kitchen sink with drain board of Diamond/Unik/ Preyag/Neerali big size 1040x510x250 mm (One thousand forty into five hundred ten into two hundred fifty millimetres) including C.P. waste with C.I. or M.S. brackets painted white including cutting holes in walls and making good the same complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge.The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 215 | Providing and fixing Stainless Steel kitchen sink with drain board of Diamond/Unik/ Preyag/Neerali big size 610x460mm ( six hundred ten into four hundred sixty millimetre) bowl depth 200mm ( two hundred millimetre) including C.P. waste with C.I. or M.S. brackets painted white including cutting holes in walls and making good the same complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge.The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 216 | Providing and fixing 15mm (Fifteen millimetre) nominal bore double lever, C.P. brass wall mixer for bath with long headed bib cock and L-bend of continental series of Jaquar / Hindon series of Jal / ESS (superior or heavy type) approved quality conforming to IS:8934 including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge.The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 217 | Providing and fixing 15mm (Fifteen millimeters) diametre C.P. brass bib tap (short /long body) of conforming to IS:8931 of Jaquar / Hindware / Cera / Kerovite and Jal of approved quality (superior or heavy type) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 218 | Providing and fixing 15mm (Fifteen millimeters) diametre C.P. brass 98 mm (ninety eight millimetre) long push cock of approved quality and colour of Jaquar / Hindware / Cera / Kerovite and Jal complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge.The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 219 | Providing and fixing 15 mm (fifteen millimetre) nominal bore, C.P. brass long body double lever bib cock for kitchen sink or wash basin of approved quality conforming to IS standards and weighing not less than 690 gms (Six hundred ninety grams) Jaquar / Hindware / Cera / Kerovite and Jal including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 220 | Providing and fixing 15mm (Fifteen millimeter) diametre C.P. brass stop cock (concealed) of standard design and of approved make of Jaquar / Hindware / Cera / Kerovite and Jal conforming to IS:8931 including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 221 | Providing and fixing 32 mm (Thirty two millimetre) diametre P.V.C. flexible waste pipe of Finolex / Relpipe (Reliance) /Vectus for sink or wash basin including P.V.C. waste fittings complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 222 | Providing and fixing C. P. Brass overhead shower rose with 15mm (Fifteen millimeters) inlet 100mm (one hundred millimetre) with single flow and shower arm of Jaquar / Hindware / Cera / Kerovite and Jal including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 223 | Providing and fixing 25mm (twenty five millimetre) nominal size gun metal gate valve with C.I. wheel of approved quality (screwed end) including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 224 | Providing and fixing 15mm (Fifteen millimeters) diametre C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931, Jaquar / Hindware / Cera / Kerovite and Jal including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 225 | Providing and fixing 1216 minimum 15mm-16mm (fifteen millimetre to sixteen millimetre) OD pipe Polyethelene-Aluminium Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 1545 ,2004 of Kitec U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature up to 80°C (Eighty degree celcius), including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers and connectors etcetera with clamps at 1.00 metre (One metre) spacing for concealed works, including cutting chases, testing the joint and making good the wall etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 226 | Providing and fixing 1620 (20mm (Twenty millimetre) OD pipe Polyethelene-Aluminium Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 1545 ,2004 of Kitec U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature up to 80°C (Eighty degree celcius), including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers and connectors etcetera with clamps at 1.00 metre (One metre) spacing for concealed works, including cutting chases, testing the joint and making good the wall etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 227 | Providing and fixing 15mm (Fifteen millimetre) diametre to wall ceiling and floor galvanised mild steel tubes (Medium grade) of Jindal star/ Jindal Hisar tube fitting and clamps including making good the wall, ceiling and floor complete in all respect including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 228 | Providing and fixing 20mm (Twenty millimetre) diametre to wall ceiling and floor galvanised mild steel tubes (Medium grade) of Jindal star/ Jindal Hisar tube fitting and clamps including making good the wall, ceiling and floor complete in all respect including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 229 | Providing and fixing 25mm (Twenty five millimetre) diametre to wall ceiling and floor galvanised mild steel tubes (Medium grade) of Jindal star/ Jindal Hisar tube fitting and clamps including making good the wall, ceiling and floor complete in all respect including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 230 | Providing and fixing 600x450mm (Six hundred into four hundred fifty millimeters) bevelled edge mirror of superior glass mounted on 6mm (Six millimeters) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge.The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 231 | Providing and fixing 1500x750mm (one thousand five hundred into seven hundred fifty millimetre) beveled edge mirror of superior glass (of approved quality) for public toilet complete with 6 mm (Six millimetre) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge.The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 232 | Providing and fixing 600x120x5 mm (Six hundred into one hundred twenty into five millimetre) glass shelf of Jaquar / Hindware / Cera / Kerovite and Jal with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40mm (Forty millimetre) long screws, rawl plugs etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 233 | Providing and fixing CP brass soap Dish Holder having length of 138mm (one hundred thirty eight millimetre), breadth 102mm (one hundred two millimetre), height of 75mm (seventy five millimetre) with concealed fitting arrangements, weighing not less than 106 (one hundred six) gram complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge.The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 234 | Providing & Fixing in position Aluminium C.P glossy wall mounted 6 (six) pegs hooks rail fixed with C.P. brass screws and rawl plugs etcetera including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. .The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 235 | Providing and fixing C.P. brass toilet paper Holder including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 236 | Providing and fixing 15mm (Fifteen millimeters) diametre C.P. brass pillar tap of conforming to IS:8931 of Jaquar / Hindware / Cera / Kerovite and Jal of approved quality (superior or heavy type) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 237 | Providing and fixing 100mm (One hundred millimetre) diametre chromium plated grating of superior quality for floor, gully or nahani trap complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 238 | Providing and fixing 8 mm (Eight millimetre) diametre C.P. / S.S. Jet of Jaquar / Hindware / Cera / Kerovite & Jal with flexible tube upto 1 metre (One metre) long with S.S. triangular plate to Eureopean type W.C. of approved quality and make as approved complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 239 | Providing and fixing PVC connection pipe ISI marked 45cm (forty five centimeters) long and 15mm (fifteen millimeters) nominal bore with brass unions complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 240 | Providing and fixing 15mm (Fifteen millimeters) nominal bore brass full way valve with wheel of Jaquar / Hindware / Cera / Kerovite and Jal complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 241 | Providing and fixing 20mm (twenty millimeters) nominal bore brass full way valve with wheel of Jaquar / Hindware / Cera / Kerovite and Jal complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 242 | Providing and fixing 110mm (one hundred ten millimetre) diametre P.V.C single equal branch of Finolex / Relpipe (Reliance) / Vectus/ Astral pressure shall not be less than 6.0 kg/cm2 (six point zero kilogram per centimetre square) with insertion rubber washer 3mm (Three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge.The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 243 | Providing and fixing 75mm (Seventy five millimetre) diametre P.V.C single equal branch of Finolex / Relpipe (Reliance) / Vectus/ Astral pressure shall not be less than 6.0 kg/cm2 (six point zero kilogram per centimetre square) with insertion rubber washer 3mm (Three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 244 | Providing and fixing 150mm (one hundred fifty millimetre) diametre P.V.C single equal branch of Finolex / Relpipe (Reliance) / Vectus/ Astral pressure shall not be less than 6.0 kg/cm2 (six point zero kilogram per centimetre square) with insertion rubber washer 3mm (Three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 245 | Providing and fixing 110mm (One hundred ten millimetre) diametre P.V.C double equal branch of Finolex / Relpipe (Reliance) / Vectus/ Astral pressure shall not be less than 6.0 kg/cm2 (six point zero kilogram per centimetre square) with insertion rubber washer 3mm (three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 246 | Providing and fixing 150mm (one hundred fifty millimetre) diametre P.V.C double equal branch of Finolex / Relpipe (Reliance) / Vectus/ Astral pressure shall not be less than 6.0 kg/cm2 (six point zero kilogram per centimetre square) with insertion rubber washer 3mm (three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 247 | Providing and fixing 110mm (One hundred ten millimetre) diametre P.V.C plain double equal branch with oval access door, of Finolex / Relpipe (Reliance) / Vectus/ Astral pressure shall not be less than 6.0 kg/cm2 (six point zero kilogram per centimetre square) insertion rubber washer 3mm (three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 248 | Providing and fixing 150mm (one hundred fifty millimetre) diametre P.V.C plain double equal branch with oval access door, of Finolex / Relpipe (Reliance) / Vectus/ Astral pressure shall not be less than 6.0 kg/cm2 (six point zero kilogram per centimetre square) insertion rubber washer 3mm (three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 249 | Providing and fixing CP brass towel rail as per model no. FS007103 of Jaquar / Hindware / Cera / Kerovite and Jal with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 600 mm (six hundred millimetre) long towel rail with total length of 645 mm (six hundred forty five millimetre), width 78 mm (seventy eight millimetre) and effective height of 88 mm (eighty eight millimetre), weighing not less than 190 gms (one hundred ninety gram) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 250 | Providing and Fixing Charomium plated 40mm (forty millimetres) diametre steel pipe for grab bars at 78cm (seventy eight centimetres) height M.S. plate as per details at the position of the seat and Wash Basin complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 251 | Providing and fixing CP brass towel ring of Jaquar / Hindware / Cera / Kerovite and Jal trapezoidal shape 215 mm (two hundred fifteen millimetre) long, 200 mm (two hundred millimetre) wide with minimum distances of 37 mm (thirty seven millimetre) from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88gms (eighty eight gram) including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 252 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank of Finolex / Vectus/ Astral having tripple layer of IS No: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes including fittings but excluding the base support for tank complete including entire carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 253 | Making connection of galvanized mild steel distribution branch with galvanized mild steel main 20mm to 40mm (Twenty milimetre to Forty milimetre) nominal bore by providing and fixing tees including cutting and threading the pipe complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 254 | Providing and laying cement concrete 1:4:8 (One Cement isto four Sand isto eight graded stone aggregate 40mm (Forty millimetre) nominal size ) all round for PVC pipes of 150mm (One hundred fifty millimetre) internal diameters, for bedding , necessary form work and curing complete including entire carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-In-Charge.The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 255 | Providing and laying cement concrete 1:3:6 (One Cement isto three Sand isto six graded stone aggregate 40mm (Forty millimetre) nominal size ) all round for PVC. pipes of 150mm (One hundred fifty millimetre) internal diameters, for hauching, necessary form work and curing complete including entire carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-In-Charge.The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 256 | Constructing brick masonry manhole in cement mortar 1:4 (One cement isto Four coarse sand ) with R.C.C. top slab with 1:2:4 mix (One cement isto two coarse sand (zone- III) isto four graded stone aggregate 20 mm (Twenty millimetre) nominal size), foundation concrete 1:4:8 mix (One cement isto Four coarse sand (zone- III) isto Eight graded stone aggregate 40 mm (Forty millimetre) nominal size), inside plastering 12 mm (Twelve millimetre) thick with cement mortar 1:3 (One cement isto Three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (One cement isto Two coarse sand isto Four graded stone aggregate 20 mm (Twenty millimetre) nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80cm (Ninety into eighty centimetre) and 45cm (Forty five centimetre) deep including C.I. cover with frame (light duty) 455x610mm (Four hundred fifty five into six hundred ten millimetre) internal dimensions, total weight of cover and frame to be not less than 38 Per Kilogram (Thirty eight kilograms) (weight of cover 23 Per Kilogram (Twenty three kilograms) and weight of frame 15 Per Kilogram (Fifteen kilograms) With Sewer bricks conforming to IS : 4885 complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge.The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 257 | Constructing brick masonry manhole in cement mortar 1:4 (One cement isto Four coarse sand ) with R.C.C. top slab with 1:2:4 mix (One cement isto two coarse sand (zone- III) isto four graded stone aggregate 20 mm (Twenty millimetre) nominal size), foundation concrete 1:4:8 mix (One cement isto Four coarse sand (zone- III) isto Eight graded stone aggregate 40 mm (Forty millimetre) nominal size), inside plastering 12 mm (Twelve millimetre) thick with cement mortar 1:3 (One cement isto Three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (One cement isto Two coarse sand isto four graded stone aggregate 20 mm (Twenty millimetre) nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 120x90cm (One hundred twenty into ninety centimetre) and 90cm (Ninety centimetre) deep including C.I. cover with frame (light duty) 455x610 mm (Four hundred fifty five into six hundred ten millimetre) internal dimensions, total weight of cover and frame to be not less than 38 Per Kilogram (Thirty eight kilograms) (weight of cover 23 Per Kilogram (Twenty three kilograms) and weight of frame 15 Per Kilogram (Fifteen kilograms) With Sewer bricks conforming to IS : 4885 complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge.The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 258 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in cement mortar 1:4 (One cement isto Four coarse sand) C.I. cover with frame (light duty) 455x610mm (Four hundred fifty five into six hundred ten millimetre) internal dimensions, total weight of cover with frame to be not less than 38 Per Kilogram (Thirty eight kilograms) (weight of cover 23 Per Kilogram (Twenty three kilograms) and weight of frame 15 Per Kilogram (Fifteen kilograms) ), R.C.C. top slab with 1:1.5:3 mix (One cement isto One and Half Fine sand isto Three graded stone aggregate 20 mm (Twenty millimetre) nominal size), foundation concrete 1:5:10 (One cement isto Five fine sand isto ten graded stone aggregate 40 mm (Forty millimetre) nominal size), inside plastering 12 mm (Twelev millemetre) thick with cement mortar 1:3 (One cement isto Three coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etcetera complete as per standard design Inside dimensions 455x610 mm (Four hundred fifty five into six hundred ten millmetre) and 45 cm (Forty five centimetre) deep for single pipe line complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 259 | Providing and fixing 455x610mm (Four hundred fifty five into six hundred ten millimetre) light duty rectangular cast iron manhole with frame cover weight 23Per Kilogram (Twenty three kilograms) single seal pattern complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 260 | Supplying and fixing C.I. cover 300x300 mm (three hundred into three hundred millimetre) without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5 Per Kilogram (four point five kilogram) complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 261 | Providing and plastering 15mm (Fifteen millimetres) thick cement plasters in single coat on fair side of brick/concrete/ stone walls for interior/exterior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth with cement mortar 1:3 (One cement isto three sand) above plinth level to all floor level complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 262 | Providing and fixing S.F.R.C heavy duty manhole cover Circular shape 560mm (five hundred sixty millimetre) diametre precast R.C.C. manhole cover with frame - H.D. - 20 (twenty) within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge.The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 263 | Provision for water lifting pump 1.00 HP (One point zero zero horse power) of Crompton/Kirloskar including all necessary fittings complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 264 | Providing and fixing 25 mm (twenty five millimetre) diametre fire hydrent inculuding all necessary fiting compelete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 265 | Providing and fixing cenralised filter of approved make for fire fighting tank inculuding all necessary fiting compelete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 266 | Providing and applying primer coat with BITUMEN emulsion (SS-1) on the prepared surface of granular base including cleaning of road surface with hydraulic brooms and spraying primer at the rate of 0.85 Kgs per Sqm. (zero point eight five kilogram) per square metre using mechanical means as per MORD technical specifications section 500 including hauling of material in all leads, lifts as per the entire satisfaction and as per direction of Engineer – in- Charge including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 267 | Providing and laying 50mm (fifty milimetre) thick Bituminous macadam with 40-60 (forty to sixty TPH hot mix plant producing an average out put of 50(fifty) tonnes per hour using crushed bindeer VG-30 (vilscosity Grade-thirty) at the rate 3.5% (Three point five percent) as per design mix with nano technology (Zycitherm) at the rate of 0.1% (Zero decimal one percent) by wieght of nitumen transported to site within all leads laid over a previously prepated surface with paver finisher to the required grade, level and alignment and rolld to achieve the desired compactin as per MORD technical specification section 500, including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 268 | Providing and applying tack coat with bitumen emulsion RS-I using emulsion pressure distributor at the rate of 0.275 kg per sqm ( zero point two seven five kilogram per Square metre) on the prepared bituminous/granular surface cleaned with mechanical broom.including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge.The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 269 | Providing and laying 30mm (thirty millimetre) compacted thickness bituminous concrete with 100-120 (one hundred to one hundred twenty) TPH hot mix batch type plant with electronic control grading-II using crushed aggregate 13.2 mm (thirteen decimal two millimetre) nominal size of specified grading premixed with bituminous binder VG-30 (Viscosity grade-Thirty) at the rate of 5.5% (five point five percent) of mix weight or as per design mix, using cement as filler with quantity not less than 2% (two percent) by weight of total aggregate or as per design mix transported to site, laid with sensor paver finisher hydraulic with sensor conrol to the required grade, level and alignment, over a previsiouly prepared surface and rolling complete with sommth three wheel roller 8-10 (eight to ten ) tonne capacity for initial break down rollng and vibratory roller 8-10 (eight to ten) tonne capacity or pneumatic tyre roller of 12-15 (twelve to fifteen) tonne with tyre pressure of atleast 0.56 MPa (Zero decimal five six) for intermediate rolling and finish rolling with 6-8 (six to eighty) tonne sommth wheeled tandom roller to achive the desire compaction as per MoRTH technical specification section 500 complete in all respect or as directed by the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 270 | Providing and laying Rubble stone flooring laid in cement mortar 1:3 (One cement isto four coarse sand), and pointing & fill the joints with cement mortar 1:3 (One cement isto three coarse sand) including curing dressing complete as per specify design pattern & approved colour etcetera including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 271 | Providing and laying 60mm (Sixty millimetre) thick factory made cement concrete interlocking paver block of M-35 (M-thirty five) grade made by block making machine with strong vibratory compaction, of approved size, design and shape, laid in required colour and pattern of NTC/ Atlantic make and including 50mm (fifty millimetre) thick compacted bed of coarse sand, filling the joints with fine sand etcetera all complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 272 | Providing and laying 80mm (Eighty millimetre) thick factory made cement concrete interlocking paver block of M-40 (M-forty) grade made by block making machine with strong vibratory compaction, of approved size, design and shape, laid in required colour and pattern of NTC/ Atlantic make and including 50mm (fifty millimetre) thick compacted bed of coarse sand, filling the joints with fine sand etcetera all complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 273 | Providing and laying at or near ground level factory made kerb stone of M-25 (M- Twenty five) grade of NTC / Atlantic cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (One cement isto three coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5.0mm (five millimetre)), including making drainage opening wherever required complete etcetera, including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 274 | Providing and Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm (twenty five millimetre), aggregate cement ratio not to exceed 15:1 (fifteen isto one), aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/cum (One hundred fifty kilogram per cubic metre), optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa (Ten Mega pascal) at 7 (seven) days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes (Eight to Ten) vibratory roller, finishing and curing complete in all respect including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge.The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 275 | Providing and laying Pavement Quality Concrete (PQC) of M30 (M- Thirty) grade in accordance with MoRTH/IRC specifications, using approved design mix with minimum cement content of 420kg/m³ (four hundred twenty kilogram per cubic metre) and maximum water-cement ratio of 0.40 (Zero point four zero), including cost of materials, mixing, transporting, placing with paver or manually, compacting with needle and screed vibrators, finishing, curing with approved compound, provision of required jointing (including dowel bars, tie bars, formwork, joint fillers, sealants), laying over a separation membrane on prepared DLC or sub-base, including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 276 | Providing and laying of hot applied thermoplastic compound 2.5mm (Two point five millimetre) thick including reflectorising glass beads @ 250 gms per sqm (at the rate Two hundred fifty Grams per square millimetre) area, thickness of 2.5mm (Two point five millimetre) is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 277 | Providing and fixing Glow studs of \\"3M\\" size 100x20 mm (one hundred into twenty millimetre) made of heavy duty body shall be moulded ASA (Acrylic styrene Acryloretrite ) or HIP (High impactpolystyrene) or ABS having electronically welded micro- prismatic lens withabrasion resistant coating as approved by Engineer in charge. The glow stud shall support a load of 13635 kg tested in accordance with ASTM D4280. Theslope of retro- reflective surface shall be 35 (thirty five)(+/-5) degress to base .Thereflective panels on both sides with at least 12 cm (twelve centimetre) of reflective area up eachside. The luminance intensity should be as per the specification and shall be tested as described in ASTM I: 809 as recommended in BS: 873 part 4 : 1973.The studs shall be fixed to the Road surface using the adhesive conformingto IS, as per procedure recommended by the manufacturer ccompelete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 278 | Supplying and installation of delineators (road way indicators, hazard markers, object markers) of \\"6M\\", having size 80-100 cm (eighty to one hundred centimetre) high above ground level, painted black and white in 15cm (fifteen centimetre) wide strips, fitted with 80 x 100 mm (eighty to one hundred millimetre) rectangular or 75 mm (seventy five millimetre) diametre circular reflectorised panels at the top, buried or pressed into the ground and conforming toIRC-79 and the drawings as per the direction of Engineer-in-Charge including all incidentals.The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 279 | Providing and fixing of 75 x 75mm (Seventy five into seventy five Millimetre) G.I. (Galvanised Iron) wire mesh fencing with 4mm (Four millimetre) thick corresponding to SWG-8 including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 280 | Providing and fixing of 75 x 25mm (Seventy five into Twenty five Millimetre) rectangular or size as per direction of Engineer in charge, welded steel wire fabric mesh, painted with two or more coats of enamel paint of approved shade over a coat of primer (Painting to be paid for separately) including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 281 | Total |
| 282 | Electrical Works |
| 283 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm (One Point Five Square Millimetres) FRLS PVC insulated copper conductor single core cable in surface / heavy class PVC conduit with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. (One Point Five Square Millimetres) FRLS PVC insulated copper conductor single core cable etc as required.(Make of switches: Legrand Lyncus, L&T Entice, Anchor Roma Classic, Panasonic Akina, Crabtree Athena, ABB Adiva, Schneider Electric Clipsal) (Make of wire : Finolex,Anchor,Polycab,Plaza)Make of conduit;- Diplast/BEC/AKG) as approved by Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST..Group C |
| 284 | Wiring for twin control light point with 1.5 sq.mm (One Point Five Square Millimetres) FRLS PVC insulated copper conductor single core cable in surface / heavy class PVC conduit , 2 (two) way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm (One Point Five Square Millimetres) FRLS PVC insulated copper conductor single core cable etc as required.(Make of switches: Legrand Lyncus, L&T Entice, Anchor Roma Classic, Panasonic Akina, Crabtree Athena, ABB Adiva, Schneider Electric Clipsal) (Make of wire : Finolex,Anchor,Polycab,Plaza)Make of conduit;- Diplast/BEC/AKG) as approved by Engineer-In-Charge The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST..Group C |
| 285 | Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm (One Point Five Square Millimetres) FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit heavy duty, and earthing the point with 1.5 sq. mm (One Point Five Square Millimetres) FRLS PVC insulated copper conductor single core cable etc as required.(Make of switches: Legrand Lyncus, L&T Entice, Anchor Roma Classic, Panasonic Akina, Crabtree Athena, ABB Adiva, Schneider Electric Clipsal) (Make of wire : Finolex,Anchor,Polycab,Plaza)Make of conduit;- Diplast/BEC/AKG) as approved by Engineer-In-Charge The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST..Group C |
| 286 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed heavy class PVC conduit as required Make:-Finolex,Anchor,Polycab,Plaza as approved by Er-In-Charge.The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST.. |
| 287 | 2 X 1.5 sq. mm + 1 X 1.5 sq. mm (Two into One Point Five Square Millimetres Plus One into One Point Five Square Millimetres) earth wire |
| 288 | 2 X 4 sq. mm + 1 X 4 sq. mm (Two into Four Square Millimetres plus One into Four Square Millimetres earth wire |
| 289 | 2 X 10 sq. mm + 1 X 6 sq. mm (Two into Ten Square Millimetres plus One into Six Square Millimetres) earth wire |
| 290 | 4 X 10 sq. mm + 1 X 6 sq. mm (Four into Ten Square Millimetres plus One into Six Square Millimetres) earth wire |
| 291 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.Make:-Finolex,Anchor,Polycab,Plaza as approved by Engineer-in -charge.The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST.. |
| 292 | 3 x 1.5 sq. mm (Three into One Point Five Square Millimetres) |
| 293 | 3 x 4 sq. mm (Three into Four Square Millimetres) |
| 294 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required(Make of switches: Legrand Lyncus, L&T Entice, Anchor Roma Classic, Panasonic Akina, Crabtree Athena, ABB Adiva, Schneider Electric Clipsal)as approved by Engineer-In-Charge The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST.. |
| 295 | 5/6 amp (Five by Six Ampere) Modular switch |
| 296 | 5 (five) pin 5/6 amp (Five by Six Ampere) socket outlet |
| 297 | modular blanking plate |
| 298 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 5 (five) pin 5/6 amps (Five by Six Ampere) modular socket outlet and 5/6 amps (Five by Six Ampere) modular switch, connection etc. as required.(Make of switches: Legrand Lyncus, L&T Entice, Anchor Roma Classic, Panasonic Akina, Crabtree Athena, ABB Adiva, Schneider Electric Clipsal)as approved by Engineer-In-Charge.The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST.. |
| 299 | Supplying and fixing suitable size GI box with modular plate and cover in FRLSont on surface or in recess, including providing and fixing 6 (six) pin 5/6 (five by six) & 15/16 amps (Fifteen by Sixteen Ampere) modular socket outlet and 15/16 amps (Fifteen by Sixteen Ampere) modular switch, connection etc. as required.(Make of switches: Legrand Lyncus, L&T Entice, Anchor Roma Classic, Panasonic Akina, Crabtree Athena, ABB Adiva, Schneider Electric Clipsal)as approved by Engineer-In-Charge .The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST.. |
| 300 | Supplying & fixing suitable size GI box wih modular plate and cover in front onsurface or in recess i/c providing and fixing 32 amp (Thirty Two Ampere) modular socket outlet and 25Amps (Twenty five Ampere) modular SP MCB, “C” curve including connection, painting etc. as required.(Make of switches: Legrand Lyncus, L&T Entice, Anchor Roma Classic, Panasonic Akina, Crabtree Athena, ABB Adiva, Schneider Electric Clipsal)as approved by Engineer-In-Charge |
| 301 | Supplying and fixing of following sizes of heavy class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.Make Diplast/BEC/AKG.as approved by Engineer-in -charge..The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST.. |
| 302 | 25 mm (Twenty Five Millimetres) |
| 303 | Providing and installation exhaust fan metal body of 300 mm (Three Hundred Millimetres) Heavy duty in the existing opening,including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required: Make : (Usha Orient , Crompton , Havells Only)as approved by Engineer-In-Charge ( Five year warranty).The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST.. |
| 304 | Supplying and fixing exhaust fan louver shutter for 300 mm.(Three Hundred Millimetres) exhaust fan on the existing wall,painting etc, as required,.The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST.. |
| 305 | Providing, Installation, testing and commissioning of BLDC ceiling fan (5 (five) star rating), with socket type 2 (two) module fan regulator including wiring the down rods of standard length (up to 30 cm (Thirty Centimetres)) with 16/0.20 mm (Sixteen by Zero Point Two zero Millimetres) twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required: (Make: Usha Technix BLDC ISI, Orient Echotech Prime, Havells Efficiencia, Bajaj Energos 26 (twenty six), Anchor Ecobreez Urban 3 (three) Blades, Crompton Energion HS Groove Hyperjet only)as approved by Engineer-In-Charge ( Five year warranty).The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST.. |
| 306 | Ceiling Fan 1200 mm (One Thousand Two Hundred Millimetres) sweep |
| 307 | Supplying and fixing of LED downlighter of following watts surrface/Recess Mounted Downlighter Round Shape with minimum system lumen efficacy of 100 (one hundred) lm/W with Pressure Die cast Aluminium Housing and HET diffuser and P.F.>0.95 ,THD<10% ,CCT 5700k/4000K, CRI 80 (eighty), IP20 optical compartement.The LED with Useful life of 50000 (fifty thousand) Hrs at L70.. The Input voltage range shall be 150V to 270V (One Hundred Fifty Volts to Two Hundred Seventy Volts) .Fixture have Surge Protection 2(two)kV .Driver complete with all accessories, connections, testing and commissioning etc. Make:- Philips/wipro/ LT as approved by Engineer-in-Charge( Five year warranty).The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST.. |
| 308 | 12W (Twelve Watts) |
| 309 | 18W (Eighteen Watts) |
| 310 | Providing and fixing of surface mounted Luminaire LED batten 10 (ten) watts ,having high Quality design aluminium extruded decorative end caps and it should be compatible with specification i.e. P.F >.9 (nine),THD<10% and luminius flux 1100 (one thousand one hundred) Lumens per watt 110 (one hundred ten),CRI> 80 (eighty) suitable for input voltage: AC 220-240 V, 50/60Hz (Two Hundred Twenty to Two Hundred Forty Volts, Fifty by Sixty Hertz), Burning hours >50000@L70 complete with all accessories, connections, testing and commissioning etc as:Make:- Philips/wipro/ LT/Jaquar as approved by Engineer-in-Charge( Five year warranty).The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST.. |
| 311 | SITC of IP40 Led fixture 20 W(twenty watts)+/- 1W with Surface Mounted 4 (four) Feet with Polycarbonate diffuser with aluminium housing having minimum system lumen efficacy of 110 m/W with minimum system lumen output 2200 (two thousand two hundred) lumens with P.F.>0.95 (zero point ninety five) with THD<10% ,CCT 5700K, CRI 80 (eighty),Surge Protection 3 Kv (Three Kilovolts) .The LEDs with minimum life of 50000 burning hours. The Input voltage range shall be150V to 270V.Make:- WIPRO/PHILIPS/LT as approved by Engineer-in -charge( Five year warranty).The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST.. |
| 312 | Providing and fixing of IP65 Bulkhead led fixture 10 W +/- 1 W (Ten Watts Plus or Minus One Watt) Wall Mounted with minimum system lumen efficacy of 100 (one hundred) lm/W with Pressure Die Cast Aluminum housing, Polycarbonate Opal Diffuser and P.F.>0.95(zero point ninety five) with THD<10% ,CRI 80(eighty).The LED shall be tested with LM80-08 standard with Useful life of 50000 (fifty thousand) Hrs at L70 .The LEDs used in the luminaire shall have CCT of ANSI Bin 5700 (five thousand seven hundred) K only with CRI of minimum 80.The Input voltage range shall be 140V to 280V(One Hundred Forty Volts to Two Hundred Eighty Volts), 50/60 HZ(Fifty by Sixty Hertz) complete with all accessories, including connections, testing and commissioning etc.as required complete in all respects. Make:- Philips/wipro/ LT/Jaquar as approved by Engineer-in -charge.( Five year warranty).The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST.. |
| 313 | Earthing with copper earth plate 600 mm X 600 mm X 3 mm(Six Hundred Millimetres into Six Hundred Millimetres into Three Millimetres) thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 (two point seven) metre long etc. with charcoal/ coke and salt as required..The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST.. |
| 314 | Providing and fixing 4.00 mm dia (Four Point Zero Zero Millimetres Diameter) copper wire on surface or in recess for loop earthing as required..The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST.. |
| 315 | Supplying and laying 20 mm X 3 mm (Twenty Millimetres into Three Millimetres) copper strip as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 (two) sets of brass nut bolt & spring washer spaced at 50 mm (Fifty Millimetres). The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST.. |
| 316 | Providing and fixing of lightning conductor finial, made of 20 mm (Twenty Millimetres) outer dia. 1.2 mtr(One Point Two Metres) long copper tube, having single prong at top, with 85 mm dia 3 mm (Eighty-Five Millimetres Diameter Three Millimetres) thick copper base plate including holes etc. complete as required. Make:- True power , Earth plus, Ashloka as approved by Engineer-in -charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST.. |
| 317 | Supplying and fixing copper strip bus-bars suitable for 100 Amp.(One Hundred Ampere) 415 volts (Four Hundred Fifteen Volts) capacity 4 (four) No. each of cross-sectional area (16mmx3.17mm (Sixteen Millimetres into Three Point One Seven Millimetres)),in the existing enclosure with all accessories including connections etc. as required:.The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST.. |
| 318 | Supplying Installaion Testing & commissiong of copper strip bus-bars in existing cubicle panel board suitable for 200 Amp. (Two Hundred Ampere) 415 volts (Four Hundred Fifteen Volts) capacity 4 (four) No. each of cross-sectional area (16mmx3.17mm(Sixteen Millimetres into Three Point One Seven Millimetres)),in the existing enclosure with all accessories including connections etc. as requiredMake L&T, Legrand ABB as approved by Engineer-in -charge..The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST.. |
| 319 | Supplying and fixing Aluminium strip bus-bars suitable for 1000 Amp. (One thousand Ampere) 415 volts (Four Hundred Fifteen Volts) capacity 4 (four) No. each of cross-sectional area (50X8 mm(Fifty into Eight Millimetres)). in the existing enclosure with all accessories including connections etc. as required:-The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST.. |
| 320 | Supplying and erection of following depth Indoor cubical panel, as per the standards IEC 61439-1&2 as tested assembly, IP 42 (forty two) fabricated CRCA sheet steel of 2 mm (Two Millimetres) Thick for Framework and Covers, 3 mm (Three Millimetres) thick for gland plates i/c cleaning& finishing complete with 7 (seven) tank process powder coating in approved shade,, DMC/ SMC bus bar supports,bottom base channel of MS section not lessthan 100 mmx 50 mmx 5 mm (One Hundred Millimetres into Fifty Millimetres into Five Millimetres) thick, fabrication shall be done in transportable sections, form of separation shall be form 4b with metallic separation only,the same shall be erected in the 1:2:4 ( one cement: two sand: four graded stone agreegate) cement concrete plat-form of suitable dimensions 15 cm (Fifteen Centimetres) high from ground level, thick.The size of control wiring in cubical panel FR-LSH 1.5 sqmm (One Point Five Square Millimetres).The panel should be approved /Tested from the CPRI lab. make of switcgear L&T, Schneider,ABB as approved by Engineer-in -charge.( Five year warranty).The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST.. |
| 321 | 300 mm Deep (Three Hundred Millimetres Deep) |
| 322 | 1000 mm Deep (One thousand Millimetres Deep) |
| 323 | Supplying Installaion Testing & commissiong of Following rating and breaking capacity MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as requiredMake L&T, Schneider,ABB as approved by Engineer-in -charge.( Five year warranty).The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST.. |
| 324 | 32-100 AMP 18 KA (Thirty-Two to One Hundred Ampere, Eighteen Kiloamperes) |
| 325 | 125-160 AMP 25 KA (One Hundred Twenty-Five to One Hundred Sixty Ampere, Twenty-Five Kiloamperes) |
| 326 | 320-400 AMP 50 KA (Three Hundred Twenty to Four Hundred Ampere, Fifty Kiloamperes) |
| 327 | Supplying and fixing 4 pole microprocessor ACB 1000 (one thousand) AMP , breaking capacity 50 kA (fifty kiloamperes) confirm to IS/IEC 60947-2 and IEC 60947-2 electrically operated draw outversion, high short time fault with standing capacity Icu=Ics-low for 1 (one) second for total selectivity, High mechnical and elecrtrical operting life protected through micro processor releases with on load test button inbuildt thermal memory, protection releases confirm to EMI/EMC standards, data communication and power management, breaker status and control thourgh MODBUS protocol (UN-CO module) Make:- L&T Legrand, Hager, ABB as approved by Engineer-in -charge. |
| 328 | Supplying Installaion Testing & commissiong of indicator set RY&B in existing cubicle panel board with 3 (three) Nos Kit kat (LED type) to shown the three indicating in the existing pannel complete etc as required.Make L&T, Schneider,ABB as approved by Engineer-in -charge..The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST.. |
| 329 | Supplying Installaion Testing & commissiong of Multi Function Meter in existing cubical panel board with 3(three) Nos. Cast Resin CTs and MCBs including V, A ,F ,P.F, KW, KVA, RUN HOUR,KWH,(EV AND DG), OLD ENERGY, SELECTATBLE KWH-KVH parameters connections , testing, commissioning etc. as requiredMake:- L&T, Legrand, Hager, ABB as approved by Er-In-Charge (five year warranty) Make L&T, Schneider,ABB as approved by Engineer-in -charge..The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST.. |
| 330 | Providing and fixing 100 AMP(One Hundred Ampere) , four pole, 415 volts (Four Hundred Fifteen Volts), On-Load change over switch in open execution , front handle operation, including making connections, etc. as required. Make:- L&T ,Legrand,Hager as approved by Engineer-in -charge. .The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST.. |
| 331 | Supplying and fixing of Segregated tripple pole and neutral 6(six) ways Double Door surface/ recess mounting, 7(seven) Segment 415 (Four Hundred Fifteen) volts, TPN MCB distribution board of sheet steel, dust protected, dulypowder painted, with provision to mount FP-MCB incomer, DP MCB/RCCB sub-incomer ineach phase and SP MCBs as outgoing (but without MCB ’s and incomer),complete with tinned copper din-bar, wire-set, neutral link, earth bar, detachablegland plate, cable interconnections, including earthing etc. as required:- Make L&T, Schneider,ABB as approved by Engineer-in -charge.( Five year warranty).The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST.. |
| 332 | Supplying Installaion Testing & commissiong of following way, single pole and neutral,sheet steel, MCB distribution board, 240 V (Two Hundred Forty Volts), on surface/recess, complete with tinned copper bus bar, neutral busbar, earth bar,din bar,interconnections, powder paintedincluding earthing etc. as required. (But withoutMCB/RCCB/Isolator)Make L&T, Schneider,ABB as approved by Engineer-in -charge.( Five year warranty).The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST.. |
| 333 | MCBDB 12 (twelve) WAY Double Door |
| 334 | Supplying Installaion Testing & commissiong of 5 amps to 32 amps(Five Amperes to Thirty-Two Amperes) rating, 240/415 volts(Two Hundred Forty by Four Hundred Fifteen Volts), 10 kA(Ten Kiloamperes), “C” curve,miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.)Make L&T, Schneider,ABB as approved by Engineer-in -charge.( Five year warranty).The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST.. |
| 335 | single pole |
| 336 | Supplying Installaion Testing & commissiong of 40/50/63 amps (Forty by Fifty by Sixty-Three Amperes) rating, 10 KA (Ten Kiloamperes) breaking capacity, 240 (Two Hundred Forty Volts) volts, 'C' curves, miniature circuit breaker of pole Double pole in the existing MCB DB complete with connections etc. as required:-Make L&T, Schneider,ABB as approved by Engineer-in -charge.( Five year warranty).The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST.. |
| 337 | Supplying Installaion Testing & commissiong of following rating, 240/415 volts (Two Hundred Forty by Four Hundred Fifteen Volts), 10 kA (Ten Kiloamperes), “C” curve,miniature circuit breaker suitable for inductive load of four poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.:-Make L&T, Schneider,ABB as approved by Engineer-in -charge.( Five year warranty).The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST.. |
| 338 | 32-63 Amp (Thirty-Two to Sixty-Three Amperes) TPN |
| 339 | 63 amp (Sixty Three Amperes) TPN |
| 340 | Supplying Installaion Testing & commissiong of following rating, double pole, (single phase and neutral), 240 volts(Two Hundred Forty Volts), 10 kA (Ten Kiloamperes), breaking capacity residual current circuit breaker (RCCB), having a sensitivity current 30 (thirty) milli amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.-Make L&T, Schneider,ABB as approved by Engineer-in -charge.( Five year warranty).The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST.. |
| 341 | 63 AMP (Sixty Three Ampere) |
| 342 | Supplying installation testing & comminssiong of 20(twenty)Watt Solar Light as per MNRE with MPPT Controller 12V DC, Semi Integrated Light with Inbuilt battery-1Nos b) Solar Module 120W (one hundred twenty watt) BIS approved -1Nos c) LFP Battery 48(forty eight)Ah 12.8V BIS Approved-1Nos d) 5Mtr (five metre)HDG Octagonal Pole with all accessories for Solar, OD-70/130mm(One Hundred Thirty Millimetres) Thick-3mm(Three Millimetres), Base plate-220x220x12mm(Two Hundred Twenty Millimetres into Two Hundred Twenty Millimetres into Twelve Millimetres), J-Bolts M16x450mm -1Set complete in all respect as required.Warranty-5Yrs(five years) for Complete System BIS approved make..The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST.. |
| 343 | Supplying and erection of Galvanized mild steel poles class 'A' quality of 4(four) Meter long having nominal dia. 114 mm( one hundred fourteen millimetre) at bottom and nominal dia. 60 mm(sixty milimeter) at top with cast aluminium embellishments-Q2. The poles are primer coated and painted with polyethane paint. Poles are suitable for single/double/tripple/four side post top/drop down luminaires. The poles has a service window at bottom comprising four way 25 amp (twenty five ampere) connector terminal and a 10 amp(ten ampere) MCB. Poles has a mild steel base plate having four nombers mounting holes as per drawing and can be mounted with four numbers anchor bolts. The pole to be mounted on a 1:3:6 cement concrete base (pedestal) of 450X450 mm and 300 mm(Four Hundred Fifty into Four Hundred Fifty Millimetres and Three Hundred Millimetres) including 4(four) Nos M 234X750 MM J-Type EN 8 grade foundation bolts, nuts with washers templates as required. Foundation RCC 1:2:4 shall be of size 450x450mm and depth 900 mm c/c ,connection,testing and commissioning as required complete in all respects. Make:-Twinkle (Lux Max-SP -114-N-400 Q2), Bajaj, SURYA, Wipro, Volmount as approved by Engineer-in -charge . |
| 344 | Supplying and fixing of Solar LED Post Top Lantern 18(eighteen) Watt and it should be compatible with specification i.e. IP 66 , CCT 3000 to 6000K, efficacy >150 (one hundred fifty) Lumens per watt, PWM frequency 25Hz, humidity range 0 to 95%, working time 10-12 (ten to twelve) hours per night, charging time 3(three)-5(five) hours sun shine, light mounting height 3/4 mteter above ground level, ideal current consumption less than 3 (three) milliampere, long life lithium battery pack(3.2 V 36 AH),PIR sensor which auotomatically detects human traffic presence adjusts LED brightness accordingly, in the range of 12 (twelve) meter and the light will glow automatically at full power complete with all accessories, connections, testing and commissioning etc. as required with Five Year Warranty . Make:- Twinkle (Model no Lux Max-PT-501(IP66), Wipro, Phillips,Crompton,LT as approved by Engineer-in -charge . |
| 345 | Supplying Installaion Testing & commissiong of 25 (twenty five) litre stationary storage type Electric water heater (Geyser) with temperature Knob control various sizes by means of expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, making good the damages, electrical connections, testing etc. complete as required:- -Make:-Usha,Bajaj,Recold as approved by Engineer-in -charge.( Five year warranty).The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST.. |
| 346 | Providing, laying and fixing of one No. aluminium conductor,of following size confirms to IS 7098(part-1) PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 (one thousand one hundred) volts grade on surface including lugs & gland complete in Conections testing & commissiong etc. as required .Make:Finolex ,plaza, polycab,havells as per approved by Engineer-in -charge.The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST.. |
| 347 | Armoured cable 16 sqmm(Sixteen Square Millimetres)(4 (four) core) |
| 348 | Armoured cable 25 sqmm(twenty five Square Millimetres)(3.5 (three point five)core) |
| 349 | Armoured cable 35 sqmm(thirty five Square Millimetres)(3.5(three point five) core) |
| 350 | Armoured cable 50 sqmm(fifty Square Millimetres)(3.5(three point five0 core) |
| 351 | Armoured cable 70 sqmm(seventy Square Millimetres)(3.5(three point five) core) |
| 352 | Armoured cable 95 sqmm(ninety five Square Millimetres)(3.5(three point five) core) |
| 353 | Armoured cable 300 sqmm(three hundred Square Millimetres)(3.5(three point five) core) |
| 354 | fire fighting System :-Providing, fixing, testing and commissioning of made of 250 mm(two hundred fifty Millimetres) dia, 8 mm (eight Millimetres) thick MS sheet,1200 mm(one thousand two hundred Millimetres) in height and installed vertically suitable legs, and the size of the legs shall be 75mm x75mm x5 mm(Seventy-Five Millimetres into Seventy-Five Millimetres into Five Millimetres) at the bottom and grouted in suitable RCC foundation with air release valve on top and flanged connection to riser, drain arrangement with 25 mm (twenty five Millimetres)dia gun metal wheel valve required accessories, pressure guage and painting with synthetic enamel paint of approvel shade as required. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST.. |
| 355 | Providing, laying, jointing and testing & commissioning of 'C' class heavy duty MS pipe confiroming to IS 3589 /IS 1239 including welding fitting like elbows,tees, flanges & thickness 20 mm (twenty Millimetres) , tapers,nuts bolts,gaskets, anti vibraton pads, springs, or liners of resilient, and fixing the pipe on the wall /ceiling with 2(two) to 3(three) meter distance of each split pipe support clamps with rubber of building standard reputed make and also extra supports shall be provided at the bends.Masonary or C.C blocks shall be provided for supporting the pipe at regular interval. frame making opening in the walls/floors/slabs or modification in the exiting opening wherever provided for carrying pipe line and before painting two coats of primer and the two more coats of synthentic enamel paint of required shade complete in all respect as required :MAKE:-TATA/JINDAL/SAIL/ZEINTH BERLA.The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST.. |
| 356 | 25 mm (twenty five Millimetres) |
| 357 | 32 mm (thirty two Millimetres) |
| 358 | 40 mm (forty Millimetres) |
| 359 | 50 mm (fifty Millimetres) |
| 360 | 65 mm (sixty five Millimetres) |
| 361 | 80 mm (eighty Millimetres) |
| 362 | 100 mm (one hundred Millimetres) |
| 363 | 150 mm (one hundred fifty Millimetres) |
| 364 | 200 mm (two hundred Millimetres) |
| 365 | Proviidng ,Installing and commissioning of Frist Aid hose reel with MS Construstion made from 2 mm (two Millimetres) thick and hose reel bracket grouted with rawl bolts. spray painted in post office red Conforming to IS 884 complete following as required. 20 mm (twenty Millimetres) nominal internal dia water hose thermoplastic ( Textile reinforced ) type-2(two) as per IS: 12585 30 mtr (thirty metre) long and 20 mm (twenty Millimetres) nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipments on wall. Connection from riser with 25 mm dia stop gun metal valve & socket.heavy duty water hose thermoplastic (Teitile reinforced )type II, 20 mm (twenty Millimetres) dia globe valve complete as required.Make:MINIMAX/TYCO/CEASEFIRE/NEWAGE.The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST.. |
| 366 | Supply, installation, testing & commissioning of single headed Stainless Steel ISI marked odlique pattern internal/External hydrant landing valve with 80 mm(eighty Millimetres) dia flanged inlet and 63 mm (sixty three Millimetres) dia instantaneous type female outlet complete with gunmetal cap and G.I. chain, twist release type plug and all accessories as per IS: 5290-1983 (Type'A')Make:MINIMAX/TYCO/CEASEFIRE/NEWAGE The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST.. |
| 367 | Providing, fixing of 63 mm (sixty three Millimetres)dia,15 mtr (fifteen metre) long RRL hose pipe with 63 mm(sixty three Millimetres) dia Stainless Steel male & female coupling duly bound with G.I wire, rivets etc and all accessories as per to IS 636(type-A) .Make:MINIMAX/TYCO/CEASEFIRE/NEWAGE The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST.. |
| 368 | Providing & fixing 63 mm (sixty three Millimetres) dia Stainless Steel Branch pipe with Stainless Steel metal 20 mm (twenty Millimetres) nominal internal dia size Nozzle suitable for instantaneous connection to interconnect hose pipe coupling as required and all accessories as per IS 903 Make:MINIMAX/TYCO/CEASEFIRE/NEWAGE .The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST.. |
| 369 | Providing & fixing fibre glass reinforced Fire Hose Cabinet ( 30\\"x24\\"x10\\") ( thirty inch into twenty four inch into ten inch) out door type, made out of sheet having glazed door with 6mm (six Millimetres) thick clear Glass including necessary Locking arrangement with allen Key, powder coating with Post Office Red Paint and for Hosing 2(two) Nos .RRL Hose Pipe, 1(one) No Branch pipe including grounding and suitable inscripting the words\\" Hose Cabinet\\" on the Box complete in all respect as requried. Make:MINIMAX/TYCO/CEASEFIRE/NEWAGE/ .The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST.. |
| 370 | Providing and fixing of fire brigade Gunmetal Collecting head with 63 mm dia instantaneous type inlet +150 mm (one hundred fifty Millimetres)dia flanged outlet with built incheck valve for fire brigade connection to downcomer I.S 904 specification test for 20kg/mm2 including necessary support complete in all respect.Make:MINIMAX/TYCO/CEASEFIRE/NEWAGE .The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST.. |
| 371 | 4 way (Four way) |
| 372 | Providing, fixing ,testing and commissioning of Cast iron /steel Butterfly Valve Confirming to type P.N 1.6 of I.S 13095-1991 Complete with Flanges bolt ,nuts ,gasket etc. As per table 'E' specification complete in all respect hydraulically test to 20(twenty0 K./sqcm.Make:SANT/ZOLOTO/LEADER .The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST.. |
| 373 | 80 mm (Eighty Millimetres) Dia |
| 374 | 100 mm (One hundred Millimetres) Dia |
| 375 | 150 mm (one hundred fifty Millimetres) Dia |
| 376 | 200 mm (Two hundred Millimetres) Dia |
| 377 | Providing ,fixing ,testing and commissioning of Cast Iron/steel double flanged horizontal type with gunmetal seat non-return valve confirming to class - I of IS : 5312 including nuts, bolts,washers 1.5 mm(one point five Millimetres) thick compressed asbestos gasket as per table \\"E\\" and specifications complete in all respect.Make:SANT/ZOLOTO/LEADER .The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST.. |
| 378 | 80 mm (Eighty Millimetres) Dia |
| 379 | 100 mm (One hundred Millimetres) Dia |
| 380 | 150 mm (one hundred fifty Millimetres) Dia |
| 381 | 200 mm (Two hundred Millimetres) Dia |
| 382 | Supplying, installation, testing and commissioning of single suction collecting head with cast iron body, nose coupling (draw out connection) with female outlet complete bolts, nuts and rubber insertions complete inm all respect as required), including any petty material, accessory required to complete the job as required including entire carriage with all leads and lifts.Make:MINIMAX/CEASEFIRE/NEWAGE/OMEX/SAFEX/ |
| 383 | Draw out connection |
| 384 | Providing and fixing following size Cast iron /steel Foot Valve Confirming to type P.N 1.6 of I.S 13095-1991 Complete with Flanges bolt ,nuts ,gasket etc. As per table 'E' specification complete in all respect hydraulically test to 20 K./sqcm. including any petty material, accessory required to complete the job as required including entire carriage with all leads and lifts. |
| 385 | 100 mm (One hundred Millimetres) Dia |
| 386 | 200 mm (Two hundred Millimetres) Dia |
| 387 | Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm(one point Millimetres) six thick stainless steel, Grade 304(three hundred four), sheet with 3 mm(three Millimetres) dia holes with stainless steel flange complete in all respect, including any petty material, accessory required to complete the job as required including entire carriage with all leads and lifts.make SANT/ZOLOTO/LEADER/ KIRLOSKAR |
| 388 | 100 mm (One hundred Millimetres) Dia |
| 389 | 200 mm (Two hundred Millimetres) Dia |
| 390 | Providing, fixing, testing & commissioning of 15 mm (Fifteen Millimetres) dia quartzoid bulb type sprinklers of rating 68 (sixty eight) degree centigrade with required accessories :conforming to relevant IS ammended upto date complete etc, including any petty material, accessory required to complete the job as required including entire carriage with all leads and lifts.Make. Minimax/Ceasefire/SAFEX/OMEX/TYCO |
| 391 | Pendent sprinkler |
| 392 | Providing, installation, testing & commissioning of adjustable rosette plate for 15mm (Fifteen Millimetres) dia in white finish UL Listed or FM approved complete as required, including any petty material, accessory required to complete the job as required including entire carriage with all leads and lifts. |
| 393 | Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15(Fifteen) NPT on reducer thread with maximum working pressure of 175(One hundred seventy five) PSI test pressure of 875 (Eight hundred seventy five) PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2(Two) side brackets, center bracket, stockbar of following sizes complete as required, including any petty material, accessory required to complete the job as required including entire carriage with all leads and lifts.Make:-Minimax/Ceasefire/SAFEX/OMEX |
| 394 | Length upto 1200 mm (One thousand two hundred Millimetres) |
| 395 | supply, Installing, testing and commissioning of 100mm (One hundred Millimetres) dia type pressure gauge gate valve with all accessories as requried. MAKE;-FIGBIG/EMERALD/GURUBELL .The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST.. |
| 396 | SITC Pressure switchs for Terrace pump including necessary wiring up to control panel and Ballvalve. complete in all respect.MAKE;-SYSTEM SENSOR/INDFOSS/DENFOSS/HONE .The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST.. |
| 397 | supply, Installing, testing and commissioning of 25mm (Twenty five Millimetres) dia gate valve with all accessories as requried.Make:SANT/ZOLOTO/LEADER .The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST.. |
| 398 | Supply, Installation, Testing and Commissioning of electrical driven pump (meant for hydrants& sprinklers) suitable for automatic operations consisting of the following conforming to specifications attached.(A) Horizontal mounting, End Suction type single stage centrifugal pump with cast iron body and bronze impeller with steel shaft of C-40 grade, capable of discharging 2880 (Two thousand eight hundred eighty) litres / minute of water at 70 (seventy) metres head to give a pressure of not less than 3.5 Kg/Sq cm (three point five kilogram per square centimetre) at topmost Hydrant point. (Confirming to IS-1520) |
| 399 | (B)suitable HP Capacity Two pole totally enclosed fan cooled type squirrel cage A.C. induction motor coupled with flexible coupling for the above pump suitable for 3(three) phase, 415 V(Four hundred fifteen Volts) +/-10%, 50 Hz +/- 5% A.C. supply, with IP 55 (Fifty five) protection for enclosure, horizontal mounted type with 'F' class insulation (Confirming to IS-325) |
| 400 | (C) Common bed plate for mounting pump and Moter fabricated of Moter fabricated of suitable of MS, channel as per manufactures recommendation. |
| 401 | (D) Suitable RCC pump-Foundations as per manufactures design and 4 (Four) nos Dunlop (cushy foot) heavy duty Antivibration mounting pads ,including any petty material, accessory required to complete the job as required including entire carriage with all leads and lifts. (Make:Make:KIRLOSKAR/ ABB/ SIEMENS |
| 402 | Diesel Driven Pump (Standby) :Supply, Installation, Testing and Commissioning of diesel engine driven main fire pump suitable for automatic operation consisting of following, complete in all respect as required (1) Horizontal mounting, multistage , 4 (four) stroke cycle, centrifugal pump having with cast iron body and bronze impeller C-40 (forty) shaft with gland packed grade, mechnical seal conforming to IS 649/IS/;160/IS10002 capable of discharging 2850 ( two thousand eight hundre fifty) litres / minute of water at 70(seventy) metres head to give a pressure of not less than 3.5 Kg/Sq cm(Three Point Five Kilograms per Square Centimetre) at topmost Hydrant point. (Confirming to IS-1520/9137) |
| 403 | (2) suitable HP, 1800/1500 RPM water cooled radiator mounted on the engine with multiple fan belts ,coolent 2(two) litre, diesel engine conforming to relevant BS&IS standard complete with auto starting mechanism 1(one) no battery 12V/24V 130 (One hundred thirty) AH mounted on suitable iron stand including voltmeter to indicate the voltage of the batteries , residential silencer, instruments and protection as per specification, stop solenoid for auto stop in the event of fault with audio indications,post office red colour etc as required. (a)The engine developing 62 bhp at 1800/1500 rpm and shall also be :Turbo charger, tachometer to indicate rpm of the engine,(b)Engine accessories ; fuel sevice tank with necessary pipe work,fuel filter, pump for lubricating oil and lub oil filter,necessary safty control,a standard kit of tools ( this shall be kept on hand at all times. |
| 404 | (3) Fuel tank suitable for min 12 (Twelve) hrs running & its foundation, with one empty barrel suitable for 200 (two hundred) litre with diesel 200 (two hundred) litrediesel & 1 fuel hand pump with 5(five) meters flexible hose i/c fuel piping (supply and return) with suitable wheel valve on supply line.(4) Insulation of the silencer and exhaust pipe inside the room with 50mm thick resin bonded glass wool covered with 1mm thick aluminium cladding with necessary supports. The exhaust pipe should be 10 (ten) meters outside the pump room with necessary rainwater cap etc.(5)The foundation height should be at least 300 mm (three hundred Millimetres) above the ground level. The length and breadth of foundation should be at least 250 mm (Two hundred fifty Millimetres) all around the base frame with AVM pads and angle iron frame of size 35mm x 35mm x 3mm (Thirty-Five Millimetres into Thirty-Five Millimetres into Three Millimetres) on the top edges of the foundation.(6) The following spare parts shall be supplied with the engine and kept on hand : (a) two sets of fuel filter,elements and seals, two sets of lubricating oil filters,elements and seals, two sets of belts, one complete set of engine-joints,gaskets and hoses, two injectors, one complete set of piston ring for each cylinders ,one inlet and one exhaust valve, including any petty material, accessory required to complete the job as required including entire carriage with all leads and lifts. (Make:Make:KIRLOSKAR/ ABB/ SIEMENS |
| 405 | Jockey Pump (Wet Riser System)Supply, Installation, Testing and Commissioning of electrical driven jockey pump (meant for hydrants) suitable for automatic operations, consisting of the following, conforming to specifications attached.(A) squirrel cage induction mptor suitable for 3(three) phase ,415 (Four hundred fifteen) volts suitable hp Horizontal mounting, End Suction type centrifugal pump with cast iron body and bronze impeller with steel shaft of C-40 grade, capable of discharging 180 (One hundred eighty) litres/minute of water at 70(Seventy) metres head to give a pressure of not less than 3.5 Kg/Sq cm at topmost Hydrant point. (Confirming to IS-1520) including any petty material, accessory required to complete the job as required including entire carriage with all leads and lifts. (Make:Make:KIRLOSKAR/ ABB/ SIEMENS |
| 406 | Fabrication, supply, Insallation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm (Two Millimetres) thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, interconnection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 (three) phase, 50Hz Ac Supply with enclosure protection class IP 42 (forty two) as required, including any petty material, accessory required to complete the job as required including entire carriage with all leads and lifts.MAKE of switchgear:- L&T/ABB/HAGER/LEGRAND |
| 407 | INCOMING |
| 408 | 400A, 50kA 4(Four)Pole MCCB, Ics=100% Icu rating Digital Voltmeter 0 500V with selector switch Digital Ammeter (0-400 A) with selector swtich & CTs etc.LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps Set of Copper Bus Bar 500A |
| 409 | OUTGOING( Note : All outgoing feeders for pumps should have digital Ammeter with selector switches, and LED type ON, OFF, trip indicating lamps) |
| 410 | Main Fire Pump2(Two) nos. 200 (Two hundred) A, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 75 (Seventy Five) HP pump with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation.-1 sets |
| 411 | Jockey Pump2 (Two) nos. 100(One hundred) A, 50kA TPN MCCB, Ics=100% Icu, with suitable HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation.-1 sets |
| 412 | DIESEL ENGINE CONTROLControl for diesel engine comprising -Automatic/Manual selctor switch & 3 (Three) attempts starting device, timers and relays as required, push buttons, start/stop in manual mode Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indication Battery charger suitbale for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt meter, and 0- 20 A DC Ammeter All standard relays and accessories for automatic operation of diesel engineSystem ControllerDesigning, Supply, Installation, Testing and commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers. Sensors, annunciation window for fault indication, complete as per specification, including any petty material, accessory required to complete the job as required including entire carriage with all leads and lifts. |
| 413 | Supply , Installation ,Testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, compltete in all respect, as required: (terrace pump) (B) Horizontal type multistage , centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to Is: 1520 (One thousand five hundred twenty) (C) 12.5 HP squirell cage induction motor,900(Nine Hundred) lpm ,35 (Thirty Five) head, TEFC type suitable for operation on 415(Four hundred fifteen) volts, 3 (Three) phase , 50(Fifty) hz, AC supply with IP55 class of protection for enclosure, horizontal foot mountesd type with class- F insulation, confirming to IS-325. (D) M.S fabricated common base plate, coupling guard, foundation bolts etc.as required, including any petty material, accessory required to complete the job as required including entire carriage with all leads and lifts. (Make:Make:KIRLOSKAR/ ABB/ SIEMENS |
| 414 | SITC of Cubical type panel fabricated from 2 mm (Two Millimetre) thick CRCA sheet wall mounted type made 1.8 SWG IP 54 compartmentalised with hinged locable doors, dust and vermin proof.powder coated of approved shade after 7(Seven) tank treatment process,cable alley,inter connection,Incomer 1(One) no mccb 63(Sixty Three) amp 4p 15 kA with voltmeter.Ampere Meter inbuilt, Outgoing 1 (One) no. 63(Sixty three) amp 15(Fifteen) ka 4pole 12.5 HP DOL Starter and auto/Manual switch with R/Y/B Three phase indication pump running staus indication push buttion start and stop etc. and internal wiring,earth terminal nimbering,suitable 4(Four) wire 415V ac 50 (Fifty) Hz 12.5 HP Dol Starter control wire FRLSH copper conductor etc complete in all respect, including any petty material, accessory required to complete the job as required including entire carriage with all leads and lifts.MAKE of switchgear:- L&T/ABB/HAGER/LEGRAND |
| 415 | Supplying and drawing 4 (Four) core 6(Six) sq mm cable with PVC insulated FRLSH unsheathed in existing surface /recessed steel/PVC Conduit as required.Make :Polycab,Finolex, KEI as approved by Er-In-Charge .The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST.. |
| 416 | 2(two)C x1.5 sqmm (One Point Five Square Millimetres) |
| 417 | 4(four)Cx 6 sq mm (Six Square Millimetres) |
| 418 | Providing and fixing 4 (Four) kg. ABC MAP-50% Powder type fire extinguishers are manufactured and marked to Indian standard IS: 15683. Hose shall made of EPDM Rubber, CE Marked Valve, Suitable first aid appliance for fighting fires in Class A, B & C fire that is wood, textile, flammable liquids & gases.Make:MINIMAX/TYCO/CEASEFIRE/NEWAGE .The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST.. |
| 419 | Providing and fixing.of IS marked (IS:15683) Co2 4.5 Kg (Four point five killograms) portable fire extinguisher, carbondioxide type flat base including valve, discharge hose of not less than 10 mm (Ten Millimetres)dia. 1(One) M long & complete in all respects including initial fill with CO2 gas confirming to IS:15222 filled to a filling ratio of not more than 0.667 and wall suspension bracket.Make:MINIMAX/TYCO/CEASEFIRE/NEWAGE .The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST.. |
| 420 | Providing and fixing Water CO2 9(Nine) Litrs type fire extingushers consisting of seamless cylindrical body, squeeze lever discharge valve fitted with pressure indicating guage internal discharge tube, 30cms(Thirty Centimetres) long high pressure discharge hoase, discharge nozzle, suspension bracket, confirming to IS: 15683 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge.Make:MINIMAX/TYCO/CEASEFIRE/NEWAGE .The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST.. |
| 421 | Mannual operated fire Alarm:- SITC of Fire Alarm main control and indicating panel made out of 16(Sixteen) SWG MS sheet to accommodate , 2(Two) nos 12(twelve) volts 7(Seven) AH batteries, amplifier 120(One hundred twenty) watt and power control in approved colour with louvers ventiilation locking arrangment ,audio and visul indication for the alarm and public Addressable system. complete as required .4(Four) zone. Make Agni ,Honeywell, Bosch .The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST.. |
| 422 | SITC of Fire alarm sounder with faclity to make annoucement ,mounted in MS Box (16SWG) with hinged cover plate & suitable for operation with amplifire i/c line matching transformer etc. complete as required Make Agni ,Honeywell, Bosch .The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST.. |
| 423 | SITC of manual call box of ABS type in surface /recess with stainless steel chain and hammer assembly complete with glassand bush buttion etc. complete as required. Make Agni ,Honeywell, Bosch .The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST.. |
| 424 | supply & Layinfg of 2x1.5 sq mm (Two into One Point Five Square Millimetres) fire survival armour etc. complete as required asper entire satisofed cable 600(Six hundred)/1000(One thousand) V rated with annealed copper conductor having glass mica fire barrier type covered extruded layer of cross linkable ethy lene propylene rubber (EPR) insulation and LSZH ,inner beding steel wire armouring & LSZH outer sheath complete as required as per satification and drection of Engineer-in -charge . Make. KEI, Polycap,Finolex .The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST.. |
| 425 | DG SET 58.5 KVA (Fifty Eight Point Five Kilo-Volt-Amperes) |
| 426 | Providing, Installing, Testing and Commissioning of ‘Silent Type’ Diesel Generating setnae per latest CPCB IV+ norms alongwith having Prime Power Rating of 58.5 KVA(Fifty Eight Point Five Kilo-Volt-Amperes), 415(Four hundred fifteen) volts at 1500(One thousand five hundred) RPM, 0.8 (zero point eight) lagging power factor at 415 (Four hundred fifteen) V suitable for 50 (fifty) Hz, 39 (three) phase system & for 0.85 Load Factor and consisting of the followings: |
| 427 | Diesel Engine: |
| 428 | Diesel engine 4 (Four) cylinder, 4 (Four) stroke water cooled radiator, electric start, of suitable BHP at 1500 RPM suitable for above output of alternator at 40(Forty) Degree C, 50% RH & at 1000(One thousand) Meter MSL and conforming to BS 5514, BS 649, IS 10000, capable of taking 10% over loading for one hour after 12 (Twelve) hours of continuous operation.The engine should be radiator cooled and coolant capacity . The engine will be confirm to ISO 8528 specification and should meet CPCB IV+ norms complete fitted complete with all the required accessories.The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST..Make Cummins,kirloskar,Caterpiller,Valvo penta ,perkins, Mitsubishi, Ashok leyland, Tata only. |
| 429 | Engine mounted Instrument Panel fitted with and having digital display for following: |
| 430 | (i) Start-stop switch with key |
| 431 | (ii) Water temperature indication |
| 432 | (iii) Lubrication oil pressure indication |
| 433 | (iv) Lubrication oil temperature indication |
| 434 | (v) Battery charging indication |
| 435 | (vi) RPM indication |
| 436 | (vii) Over speed indication |
| 437 | (viii) Low lub. Oil trip indication |
| 438 | (ix) Engine Hours indication |
| 439 | (X) Turbo charger |
| 440 | Alternator : |
| 441 | Synchronous alternator make stamford rated at 58.5 KVA (Fifty Eight Point Five Kilo-Volt-Amperes), 415(Four hundred fifteen) volts at 1500(One thousand five hundred), 3 (Three) phase 50 (Fifty) Hz, AC supply with 0.8 lagging power factor at 40 (Forty) Degree C, 50% RH & at 1000 (One thousand) Meter MSL. The alternator shall be having SPDP enclosure, brushless, continuous duty, self-excited and self-regulated through AVR conforming to IS: 4722/BS 2613 suitable for tropical conditions with CPCBIV+ norms and with class- F/H insulation. The voltage regulation shoud be +_1 %. . The alternator shall be of Stamford, kirloskar, Leroysomer, Mitsubishi, Caterpiller make only. |
| 442 | Acoustic Encloure Base Frame & Foundation: |
| 443 | Specially desigined to meet stringent MoEF/CPCB IV+ norms of 75 (Seventy five) dBA @ 1(One) mtr with conopy under free conditions. The acoustic enslosure is made CRCA sheets in munsel green shade and structural/sheet base fame painted in black high quality noise absorbant and fire-retardant grade acoustic insulation material (P.U foam) complying to IS 8183. Both the engine and alternator shall be mounted on suitable base frame made of MS channel The foundation shoud be designed safe bearing capacity of soil. The depths of Plain cement concrete foundation is minimum 200 mm(Two hundred Millimetres) and foundation height should be at least 300 mm (Three hundred Millimetres) above the ground level. The length and breadth of foundation should be at least 250 mm (Two hundred fifty Millimetres) more on all sides than the size of enclosure.The Gen set should be mounted on Anti vibration isolation arrangement as per recommendations of manufacturer. |
| 444 | Fuel Tank: |
| 445 | Daily service fuel tank of 165 (One hundred sixty five) liters capacity fabricated out of 3 (Three) mm thick M.S. sheet complete with all standard accessories and fuel piping between fuel tank and diesel engine with MS class ‘C’ pipes of suitable dia. There should be provision of fuel tank of fuel guage ,which should be show the level of the fuel even when the DG set is not running . the guage should be calibrated .The fuel tank should be filled from the outside as in automobiles and should be with a lockable cap. Complete with valves, level indications & accessories as required as per specifications. |
| 446 | Exhaust System: |
| 447 | Dry exhaust mainfold with hospital exhaust silencer and catalytic convertor. |
| 448 | 12V/24V DC starting system comprising of starter motors: voltage regulator and arrangement for initial excitation complete with suitable 1 (One) no of battery (25 (Twenty Five) plates, 120 (One hundred twenty) Amp. Hour capacity lead acid type) including 50 sqmm (Fifty Square Millimetres) copper cable .The battery should be accommodate in battery rack as required as per specifications. |
| 449 | Accoustic and weather proof enclosure with arrangement for fresh air intake for cooling of the engine & alternator, extraction, discharging hot air in to the atmosphere.There should be 2 (Two) nos 10 (Ten) watt LED tubes provided inside the enclosure controlled by a 5(Five) amp switch for adequate lighting during service.The power supply to this luminaire should be load side of the AMF panel. as per specifications. |
| 450 | AMF PANEL |
| 451 | Fabricating, Installing, Testing & Commissioning of automatic mains failure control including auto by-pass panel, suitable for 58.5 KVA (Fifty Eight Point Five Kilo-Volt-Amperes) silent type DG set complete with relays, timers, set of CTs for metering & protection and energy analyser to indicate currents, Signal cable appropriate size, phase and line voltages, frequency, power factor, KWH, KVARH & provision for overload, short circuit, restricted earth fault, under frequency, control cabling from AMF panel to diesel engine and elsewhere if required, all complete and inter locking including the following: |
| 452 | 2 (Two) Nos.4 (Four) pole MCCB 125 ( one hundred twenty five) AMP for D.G and main Contactor |
| 453 | 2 (two) nos. Mains and DG Contactor 100 ( one hundred) amp |
| 454 | Auto/Manual/Test/Off selector switch |
| 455 | 2 (Two) Nos. over voltage relay, 2(Two) Nos. reverse power relay and 2(Two) Nos. under voltage relay. |
| 456 | 3 (Three) Sets of current transformers 15(Fifteen) P 10(Ten) accuracy for protection and 15(Fifteen) VA class-I for metering |
| 457 | Energy analyser unit to indicate current voltage frequency power factor and KWH |
| 458 | Digital ammeter voltmeter |
| 459 | Indicating lamps for load on mains and load on set |
| 460 | Fuse for instruments |
| 461 | Battery charger, complete with transformer/ rectifier, D.C. voltmeter and ammeter, selector switch for trickle, off and boost and current adjustment. |
| 462 | Main supply failure monitor |
| 463 | Supply failure timer |
| 464 | Restoration timer |
| 465 | Control unit with three impulse automatic engine start/stop and failure to start lockout. |
| 466 | Impulse counter with locking and reset facility. |
| 467 | ON/OFF/Control circuit switch with indicator |
| 468 | Audio/Video annunciation for |
| 469 | (i) High water temperature |
| 470 | (ii) Low lubricating oil pressure |
| 471 | (iii) Engine over speed |
| 472 | (iv) Engine fails to start |
| 473 | (v) Full load/maximum load warning |
| 474 | vi Signal cable appropriate size |
| 475 | Supplying and fixing exhaust gas piping of 3(Three) inch dia. welded black MS, B Class pipe conforming to IS:3589 cut to required lengths and installed with necessary bends, supports and clamps, anti-vibration mountings, insulation of exhaust system with mineral wool/Rockwool,50 mm (Fifty Millimetres) thick wiremesh & aluminum cladding etc., as required as per specifications.The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST.. |
| 476 | Providing, laying and fixing of PVC round sheathed 4 (Four) core 2.5 sqmm (Two Point Five Square Millimetres) copper conductor flexible cable for voltage grade up to 1100 (One thousand one hundred) volt , as required complete in all respect. Make :-Finolex,Polycab/KEI The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST.. |
| 477 | Provding and refilling of high speed diesel for 58.5 KVA (Fifty Eight Point Five Kilo-Volt-Amperes) DG SET complete in all respect.The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST.. |
| 478 | Annual maintenance contract of 58.5 KVA (Fifty Eight Point Five Kilo-Volt-Amperes) DG SET for five years consisting of monthly visit to check the general condition of generator. Check and set operation parameters as specified by company. Service of engine will be carried out strictiy as per company norms.Engine oil volume 20 (Twenty) ltr capacity, filter, coolant, air filter ,fan belt, etc complete one service in a year will be carried out strictly as per company norms.check and monitor the performs during each visit.To check & ensure optimum performance of sub assembles of machine, fuel timming, tappet clearance etc, for engines and reset the same as require. To check & set all the fasteners, operation of warning devices, operational parameters of breakdown of engines.if any breakdown occure in dg set ,the breakdown should be check & rectify within 24 (Twenty four) hour by service engineer.The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST.. |
| 479 | CCTV SURVEILLANCE |
| 480 | Supply, installation, testing and commissioning of Indoor/outdoor type 5MP (Five Megapixels) Fixed Lens Dome Camera with 1/2.7\\" progressive scan CMOS, integrated 3.6mm (Three point six Millimetres) Fixed Lens,High Resolution- 2592 ×1944@30fps, Minimum Triple Stream Support, Inbuilt Smart IR LED upto 30m (Thirty metre)distance, 0.003 lux [email protected](AGC ON);B/W 0 Lux@IR ON, H.264/ H.265 /H.265+ encoding support, 120dB True WDR, 3D DNR, IR cut filter with auto switch( Day/Night/Auto),Built in mic, Built in Power over Ethernet (PoE), & 12VDC operated,Micro SD upto 512GB (Five Hundred Twelve Gigabytes). in-built features-face recognition motion detection, tampering alarm,line crossing detection, cross counting,Human & vehicle detection,heat map,stationary object detection IP67 & IK10 protection, ONVIF Profile S/G/T/M compliant, with Junction box & required accessories. The Camera should be STQC Certified. (Make- Securus/Vicon/Norden/Panasonic)The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST.. |
| 481 | Supply, installation, testing and commissioning of Indoor/outdoor type 5MP (Five Megapixels) Fixed Bullet Camera with 1/2.7\\" progressive scan CMOS, integrated 3.6mm Fixed Lens,High Resolution- 2592 ×1944@30fps, Minimum Triple Stream Support, Inbuilt Smart IR LED upto 30m distance, 0.003 lux [email protected](AGC ON);B/W 0 Lux@IR ON, H.264/ H.265 /H.265+ encoding support, 120dB True WDR, 3D DNR, IR cut filter with auto switch( Day/Night/Auto),Built in mic, Built in Power over Ethernet (PoE), & 12VDC operated,Micro SD upto 512GB(Five Hundred Twelve Gigabytes), in-built features-face recognition motion detection, tampering alarm,line crossing detection, cross counting,Human & vehicle detection,heat map,stationary object detection IP67 & IK10 protection, ONVIF Profile S/G/T/M compliant, with Junction box & required accessories. The Camera should be STQC Certified. (Make- Securus/Vicon/Norden/Panasonic)The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST.. |
| 482 | Supply, installation, testing and commissioning of 64 (Sixty four) Channel NVR with User Interface: Graphic User Interface (GUI); Operating System: Embedded Linux; Operation Mode: Preview, Record, Playback, Backup, Network; Password Security: Multi-level User Management; Compliance: ONVIF Profile S, G & T; Model should be Available on Conformant Models List; Resolution: Supports up to 12 (Twelve) Megapixel Network Camera Input; Video Input: 64CH; HDMI Output: 2(two) x HDMI (Should Support 4K UHD Resolution); VGA Output: Supports; Audio Compression: G.711a; Audio In/Out: 1CH RCA In / 1CH RCA Out; Video Compression: H.265+/H.265/H.264; Stream Type: Video and Audio/Video Supported; Recording Mode: Always/Schedule/Alarm Recording/Motion Detection Recording; Playback Mode: Common Playback, Smart Search, Face Search, Vehicle Search; Video Search: Time/Channel/Event; Dual-Stream: Supports; Mobile Monitoring: Free Application for Android and iPhone; HDD Port: 8 (Eight) Pieces SATA; HDD Maximum Capacity: 10TB (Ten Terabytes) for each SATA Connector; Network Protocol: DHCP, DNS, FTP, DDNS, NTP, UPNP, Email, RTSP; Network: 2(Two) RJ45 10M/100M/1000M; Multiple IP Network Configuration: Must be Supported; NVR to NVR Cascading: Remote, Local, Viewing, Recording; Health Monitoring: Built-in NVR with Data Packet Loss information and Realtime Bandwidth Consumption; Virtual Network: NVR should support virtual network configuration; Video Analytics: Face Detection, Human Detection, Vehicle Detection, People Counting, Line Crossing, Active Deterrence; USB Connector: 2(Two) x USB 2.0; 1 x USB 3.0 for Faster Backup; Firmware Update: Support USB Update/Network Update; IP Camera Configuration/Upgradation: Must be Supported from NVR; Alarm In/Out: 16(Sixteen) Inputs / 49Four) Outputs; Operation Temperature: -10°C to +65°C; Hard Disk Redundancy: Supported; Operation Humidity: 10% to 90%; MAC Address: NVR MAC Address should be Registered in the Name of the OEM; Certifications: CE, FCC, RoHS & BIS (Make- Securus/Vicon/Norden/Panasonic)The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST.. |
| 483 | Supply, Installation, testing and commissioning of 16 (Sixteen) port PoE Network switch with specifications as follows: Network Ports: 16 (Sixteen) Ports POE 10/100 Mbps Poe RJ45 Port, 2(Two) Ports Uplink 10/100/1000 Mbps, 1(One) Ports Uplink 10/100/1000 Mbps Gigabit SFP Port; POE Standard: IEEE802.3 af/at; Power Wattage : 200 Watts or more; Network Standard: IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3az, IEEE802.3z; VLAN Mode: Supported; POE Network Transmission Distance: Max 250 Meters should be supported for POE; Uplink Network Transmission Distance: Max 100 (One hundred) Meters; Bandwidth: 7.2 Gbps. In case of Foreign OEM submission of Certification of Testing is mandatory as per govt notification. (Makes: Securus/Cisco/Juniper/Extreme)The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST.. |
| 484 | Supply, Installation, Testing and Commissioning of 4 TB (Four Terabytes) Hard Disk. (Make :- Segate/WD/Toshiba)The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST.. |
| 485 | Supplying & Fixing of CAT-6 24 (Twenty four) AWG Patch cord of 3(Three) meters length including Connecting Etc complete as required. (Makes: Molex/Digisol/Commscope)The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST.. |
| 486 | Supply, Laying / fixing of PREMIUM High−Speed HDMI Cable 5(five) Meter Length; Max Resolution 4K@60Hz, Length: 5(five) Meter Feet Etc Complete as required. (Makes: PAC/Kramer/Crestron)The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST.. |
| 487 | Supply, installation, testing and commissioning of 6U Rack with 1(One) side FAN with 3(Three) socket PDU with 15 (Fifteen) AMP DP for power surge safety; Size: 800x600mm(Eight Hundred Millimetres into Six Hundred Millimetres); With mount accessories. (Make: Valrack/Netrack/Comrack)The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST.. |
| 488 | Supply, installation, testing and commissioning of Commercial 43\\" (Forty three inch) LED Monitor, HD, HDMI Port, Component Video Inputs, (Make: LG/Panasonic/Samsung)The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST.. |
| 489 | Supply, installation, testing and commissioning of CAT 6(Six) UTP Cable.Transmission frequency of 250 MHz (Minimum),cable Should be 4 (Four) pair and Cable should be jacket. (Makes: Molex/Digisol/Commscope)The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST.. |
| 490 | Supply, installation, testing and commissioning of 3 (three)core 1.5sqmm (One Point Five Square Millimetres) power cable Armored. (Make: Havells, Polycab, Finolex)The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST.. |
| 491 | Supply, installation, testing and commissioning of RJ45 Connector for CAT 6 (Six) Cables. RJ45 modular plug supports 4 (Four) twisted pairs etc complete as required. (Makes: Molex/Digisol/Commscope)The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST.. |
| 492 | LIFTS |
| 493 | Supplying, Installation, Testing & Commissioning of minimum 13 (Thirteen) passenger capacity passenger Machine room less (MRL) lift with regenerative drive as per CPWD General Specification for Electrical Works (Part-III Lift & Escalator) 2003, BIS Codes, NBC 2016 as amended upto date having provision for barrier free access as per Harmonised Guidelines & Standards for Universal Accessibility in India - 2021 of MoHUA, serving different floors in the lift shaft as per detailed specifications enclosed and as under including all other equipment and accessories complete as required:- (i) Speed-1.25 MPS (ii) Floors-7 (G+7) (iii) Travel -30 Meters (approx.) (iv) Stops & opening- 8 stops and 8 openings (v) Controller: A.C. variable voltage & variable frequency (vi) Automatic rescue device (ARD) complete with dry maintenance free batteries as required. vii) Operation: Microprocessor based single automatic push button/simplex selective collective/duplex collective selective with/without attendant (viii) Power-415 Volts+10%, 3 (Three) phase, 50 (Fifty) Hz, 4 (Four) wires system (ix) Car Enclosure: Stainless steel scratch proof (Moon Rock/Honeycomb on all sides and stainless steel decorative ceiling with fans (indirect throw) and LED fitting. (x) The car flooring should be smooth and antiskid as approved by engineer-in-charge. (xi) Type of doors (a) Car: Power operated, centre opening horizontal sliding stainless steel scratch proof (Moon Rock/Honeycomb/ Hairline Finish). (b) Landing doors: stainless steel scratch proof . (xii) A hand rail not less that 600mm long at 900mm (Nine hundred millimetres) above floor level to be fixed adjacent to control panel in the lift car. (xiii)Voice announcement system in the car to announce the position of the elevator in the hoist way as the car passes or stops at floor served by the elevator. (xiv) Closed loop Control System, protection against power fluctuation, self diagnostic control, Landing doors 2 (Two) hours Fire rated, Overload detection and protection, Overspeed Governer, Dot Matrix LED D & P Indicators In Car & Landings, BMS Compatibility, tamper proof infrared curtain covering almost the entire height of the lift car door, Alarm horn, Anti Nuisance Operation, CCTV camera system with 4 MP IP camera, suitable NVR and HDD for 30 (Thirty) days storage backup , Firemen switch, 2/3 way intercom, Emergency Stop Switch with battery backup for fan and light fitting for 1(One) hour, pit ladder. (xv) The lift doors shall have a vision panel to enable persons with hearing impairment to signal for help or assistance in the event of an emergency. (xvi) An appropriate technological support be provided (Through emergency messaging |services or alarms etc.) to respond to the emergency requirements of person with hearing impairment or deafness. (xvii) In case of failure of ARD or other electronic devices, a provision of manual rescue be provided. (Make :-OTIS/TKE/KONE/ MISTSUBISHI/ JOHNSON)The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 494 | Providing Comprehensive Annual Maintenance Contract for two Nos. Passenger Lifts; Simplex Automatic with/without attendant] for a total period of 5 (Five) years. The scope includes quarterly monthly preventive servicing, checking of safety devices, and prompt breakdown maintenance with minimum downtime. The contract is fully comprehensive, covering the troubleshooting, repair, and replacement of all worn-out components, including lamps,push buttons, drive, ARD batteries, and over-voltage protection devices. The maintenance cycle commences with 1 (one) year of free service after successful handover to the client department. . All operations shall be carried out to the entire satisfaction of the Engineer-in-Charge.The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST.. |
| 495 | Supplying, installation, Testing & Commissioning of 20 KVA (Twenty Kilo Volt-Amperes) capacity at full load (Unity Power Factor) at operating temperature 0 to 40 (Forty) 0C, Relative humidity 0 to 95%, Online double conversion true sine wave Uninterrupted hot swapable (allow for the replacement or addition of battery modules without shutting down the entire system) modular Power Supply (UPS) system with N+1 modules (N denotes total number of modules required for rated capacity).The UPS shall include a Rectifier, inverter, battery bank suitable for 30 (Thirty) minutes back up (Battery VAH capacity shall not be less than 1600 (One thousand Six hundred) VAH per KVA of UPS rating per Hour backup time) on full load (Battery shall be VRLA, SMF in ABS Container) and Static Bypass switch along with provision for manual bypass, suitable isolation transformer for additional protection against neutral faults etc. UPS shall have inbuilt phase sequence correction. The UPS systems offered are to be of the latest technology with Digital Control Microprocessor based forreliable operation using Insulated Gate Bipolar Transistor (IGBT)'s both for the rectifier & inverter (3 Level) with PWM (Pulse Width Modulation). The quality of design, manufacturing and inspection process should confirm to the relevant Inter-national standards such as IEC/EN/VDE. The operating efficiency of the UPS systems shall be >96% while operating on battery mode and delivering quality power to the 100% non-linear loads. Current total harmonic effect(ITHD) on the input grid shall be <5% at 50 %load. (The required LC ( inductor (L) and a capacitor (C)) filters shall be included in UPS cost), extreme power factor kit to be included to limit the input power factor (PF) to 0.99 and output power factor shall be unity (i.e. kw rating of the UPS shall be kva rating x 1 ), however UPS shall be suitable to take load at 0.7 laging to 0.7 leading power factor loads.warranty on UPS five year & on batteries 3(three) years .Make : APC-Schneider/ Legrand-Numeric / Emerson-Vertiv/Microtek for UPS & Exide/Amaron-Quanta/Panasonic/ Make for SMF Batteries(Performance Comply to IEC 62040-3) .( NOTE . The Contractor shall be carried out one service quartly during five year by authurised OEM ,Also if any breakdown occure during warranty period the contractor shall be rectify within 24 hour/minimum time period.) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 10, 2026
11:30 IST
Tender Published
Tender notice published.
TodaySep 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysSep 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender