Tender For annual repair To Circuit House Type-A, Type-V And Type-4
Tender Value
12 Lakhs
Estimated cost
Bid Submission
16 Sep 2026
1 days left
EMD
1.20 Lakhs
Bank guarantee accepted
Document Fee
1106
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kanpur → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for annual repair To Circuit House Type-A, Type-V And Type-4
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 11-Sep-2026 | Corrigendum | Other | 16-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling old or scerting racking out points and clearing the surface for plaster including disposal of Unserviceable of rubishto the dumoping ground with in 50 meters Leads.D.S.R.No.15.56 |
| 2 | 12 mm cement plaster on rough side of single or half brick wall of mix: 1:6 (1 cement: 6 coarse sand) including cost of all material, labour, T&P etc. required for proper completion of work. DSR No.13.4.2 |
| 3 | 12 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand) including cost of all material, labour, T&P etc. required for proper completion of work.DSR No.13.4.1 |
| 4 | Providing and fixing fly proof stainless steel grade 304 wire gauge, toWindows and clerestory windows using Wire gauge With average Width Ofaperture I .4 mm in both directions with wire Of dia. 0.50 mm all complete.I With 2nd class teak wood beading 62X19 mm DSR NO 9.135.1 |
| 5 | Providing and fixing of ISI Marka flush doors shutter conferming to IS:2202(Part I) Non decorative type core of block board construction with frame of 1st class hard wood and well matched comercial 3 ply veenering with Vertically grains or cross bands and face veneeres on both face of shutter:. AS per DSR No.9.21.2 |
| 6 | Providing and fixing bright finished brass tower bolts (barrel type) withnecessary screws etc. complete :200x10 mm DSR 9.74.2 |
| 7 | Providing and fixing bright finished brass door latch with necessary screwsetc. complete :300x16x5 mm DSR 9.75.1 |
| 8 | Removing White and colour wash by scrapping and sand papering and preapring the surface smooth including necessary repairs to scratches etc complete .DSR No. 13.88 |
| 9 | Providing and applying white cement based putty of average thickness1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. DSR 13.80 |
| 10 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour .DSR-13.81.1(old work) |
| 11 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work DSR No. 13.99.1 |
| 12 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface sqm DSR No. 13.112.1 |
| 13 | Providing and fixing 20 mm Dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm dia nominal outer dia pipes DSR 18.8.2 |
| 14 | Providing and fixing 25 mm Dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 25 mm dia nominal outer dia pipes DSR 18.8.3 |
| 15 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead For thickness of tiles above 25 mm and up to 40 mm DSR 15.23.2 |
| 16 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3(1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.DSR8.31 |
| 17 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 1)CP Bib cock 15mm dia DSR 18.50.1 |
| 18 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore DSR 18.52.1 |
| 19 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter DSR 12.41.2 |
| 20 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. DSR 18.48 |
| 21 | Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. DSR 10.31 |
| 22 | Providing and fixing hard drawn steel wire fabric of size 75 x25 mm meshor other suitable size wire mesh to be fixed & firmly anchored to theconcrete surface by means of \\"L\\" shaped mild steel shear key weldedwith existing reinforcement including the cost of materials, labour, tool &plants as approved by Engineer-in-charge. DSR NO. 26.40 |
| 23 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level whiteflushing cistern, including flush pipe, with manually controlled device(handle lever), conforming to IS : 7231, with all fittings and fixturescomplete, including cutting and making good the walls and floors whereverrequired W.C. pan with ISI marked white solid plastic seat and lid DSR 17.2.1 |
| 24 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests DSR 17.1.1 |
| 25 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab of colour Black, Cherry/Ruby Red or equivalent DSR 11.56.1 |
| 26 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer DSR NO.17.7 A(a) |
| 27 | Providing and Fixing Stainless steel sinkA ASI 304(18/8) Kitchen Sink as per IS:13983 with C I Bracket and stainless steel plug 40 mm including painting or fittings and bracket, cutting and making good and walls where ever required 610x460 mm bowl depth 200 mm DSR NO./17.10.2.2(Without Drain Board) |
| 28 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate DSR 11.3.1 |
| 29 | Cleaning of chocked sewer line by diesel running vehicle mountinghydraulic operated high pressure suction cum jetting sewer cleaningmachine fitted with pump having 4000 litres suction capacity and 6000litres water jetting tank capacity including skilled operator, supervisingengineer etc. for cleaning and partial desilting of manholes and dechockingof sewer lines. Dechocking and flushing of sewer line from one manholeto another by high pressure jetting system of 2200 PSI for sewer line (from150 mm dia upto 300 mm) DSR NO 14.77 |
| 30 | Providing and laying water proofing treatment in sunken portion of WCs,bathroom etc., by applying cement slurry mixed with water proofingcement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with waterproofing cement compound @ 0.253 kg/ sqm_ This layer will be allowedto air cure for 4 hours.(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with waterproofing cement compound @ 0.126 kg/sqm_ This layer will be allowed toair cure for 4 hours followed with water curing for 48 hours.The rate includes preparation of surface, treatment and sealing of alljoints, corners, junctions of pipes and masonry with polymer mixed slurry DSR NO.22.5 |
| 31 | Renewing glass pans in doors, windows and ventilators etc. 4 mm thick fixed with putti etc. complete including cost of all labour material, T&P etc. DSR 14.5.1 |
| 32 | Brick work With common burnt clay F.P.S. (non modular) bricks Of class designation 7.5 in foundation and plinth in:Cement mortar I (l cement : 4 coarse sand) DSR NO . 6.1.1 |
| 33 | Reinforced cement concrete work in beams, suspended floors, roof shaving slope upto 15' landings, balconies, shelves, chajjas, lintels, bands,plain window sills, staircases and spiral stair Cases above plinth level upto floor five level, excluding the cost of centering. shuttering, finishing andreinforcement with (1 cement : 1.5 coarse sand(zone-lll) derived from natural sources : 3 graded stone aggregate 20 mm nominal Size derived from natural sources). DSR 5.3 |
| 34 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more DSR 5.22.6 |
| 35 | Centering and shuttering induding strutting, propping etc. and removalof form for Suspended floors, roofs, landings, balconies and accessplatform DSR NO.5.9.3 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 11, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 16, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 1 daySep 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender