Tender For Providing And Fixing Aluminium Composite Panel Ceiling (Acp) & Tile Work In Eb- Iii/06 Quarter Hpsebl Colony At Sunder Nagar.
Tender Value
3.13 Lakhs
Estimated cost
Bid Submission
18 Sep 2026
7 days left
EMD
3131
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mandi → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing And Fixing Aluminium Composite Panel Ceiling (Acp) & Tile Work In Eb- Iii/06 Quarter Hpsebl Colony At Sunder Nagar.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :Of area 3 sq. metres and below |
| 2 | Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead. |
| 3 | Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete |
| 4 | Providing and fixing Aluminium composite panel ceiling of approved quality with necessary nails etc. complete (frame work to be paid separately): White face Aluminium composite panel |
| 5 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : F or fixed Portion: Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 6 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing andfixing hinges/ pivots and making provision for fixing of fittings whereverrequired including the cost of EPDM rubber / neoprene gasket required(Fittings shall be paid for separately)Anodised aluminium (anodised transparent or dyed to required shadeaccording to IS: 1868, Minimum anodic coating of grade AC 15) |
| 7 | Providing and fixing glazing in aluminium dooe,window, vwntilator shutter and partitions tc with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin- charge . (Cost of aluminium snap beading shall be paid in basic item. with float panes of 5.00 mm thickness weight not less tha 12.560 kg/sqm |
| 8 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm for doors, windows and clerestory windows with hinges and necessary screws : 35 mm thick |
| 9 | Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour confirming to Is:4457 laid in acid and or alkali resistant mortar bedding , including cutting, fitting and grouting of 3mm wide jointswith epoxy grout comprisinf\g 0.70 kg organic coated filler of approved shade mixed with 0.10 kg hardner and 0.20 kg resin per kg including filling finishing and all incidental works complete as per the directions of the Engineer-in-Charge. In flooring on a abed of 10 mm thick mortar 1;4 (1 acid proof cement: 4 coarse sand):- acid and alkali resistant tile. |
| 10 | Repair to plaster of thickness12 to20mm in patches of 2.50 sqm and under including cutting the patch in proper shap, raking out joints and repairing and plastering the surface of the walls including disposal of rubbish to the dumping ground all complete as per direction of EIC Cement mortar 1:4 (1cement:4 sand) |
| 11 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :(250*16mm) |
| 12 | P/F aluminium tower bolts ( nodiz type) nodized transparent or dyed to required shade and colour with screws etc. complete. For doors (150x10mm) |
| 13 | P/F aluminium handles anodized transparent or dyed to required colour & shade with necessary screws etc. complete. For doors 125 mm |
| 14 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (ofapproved quality) complete with 6 mm thick hard board ground fixed towooden cleats with C.P. brass screws and washers complete. |
| 15 | Providing and fixing unplasticised PVC Connection pipe with brass union : 45 cm long 15 mm nominal bore |
| 16 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps (cera) |
| 17 | Providing and fixing white vitreous china pedestal for wash basin completel recessed at the back for the reception of pipes and fittings.(cera) |
| 18 | Providing and fixing C.P. brass Angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore.hindware |
| 19 | Providing and fixing PTMT grating of approved quality and colour Circular type 100 mm nominal dia |
| 20 | Providing and fixing 600x120x5mm glass shelves with edges round off supported on anodized aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws , rawl plugs etc. complete |
| 21 | Providing and fixing 32 mm dia, PVC waste pipe flexible (coil type) length not less than 800 mm. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysSep 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender